Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 43517-2023 |
Ergonomics of the physical environment Assessment of the environment thRough environmental surveys (measurements of physical quantities and subjective human evaluations) {译} 物理环境的人类工效学 通过环境调查(物理量测量和人的主观评价)对环境进行评估 |
China National Standards Rough |
English PDF |
GB/T 43317-2023 |
Rough-terrain forklift operator training content and methods {译} 越野叉车 操作者培训 内容和方法 |
China National Standards Rough |
English PDF |
GB/T 42671-2023 |
Test method for surface Roughness of carbon materials {译} 炭素材料表面粗糙度试验方法 |
China National Standards Rough |
English PDF |
GB 21351-2023 |
Energy Consumption Quotas per Unit Product of WRought Aluminum and Aluminum Alloys {译} 变形铝及铝合金单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 42784.1-2023 |
Rough terrain forklifts - Test methods for verification of visibility - Part 1: Telehandlers {译} 越野叉车 验证视野的试验方法 第1部分:伸缩臂式叉车 |
China National Standards Rough |
English PDF |
GB/T 42751-2023 |
Information technology; Biometric identification; Specifications for high-thRoughput sequencing genotyping systems {译} 信息技术 生物特征识别 高通量测序基因分型系统规范 |
China National Standards Rough |
English PDF |
GB/T 35205.6-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 6: Inclined cab {译} 越野叉车 安全要求及验证 第6部分:倾斜式司机室 |
China National Standards Rough |
English PDF |
GB/T 35205.2-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 2: Swivel forklifts {译} 越野叉车 安全要求及验证 第2部分:回转式叉车 |
China National Standards Rough |
English PDF |
GB/T 42698-2023 |
Textiles - Testing and evaluation of anti-see-thRough properties {译} 纺织品 防透视性能的检测和评价 |
China National Standards Rough |
English PDF |
GB/T 42157.2-2023 |
Rough terrain forklifts - Non-integrated personnel working platforms - Part 2: Requirements for users {译} 越野叉车 非集成式人员工作平台 第2部分:对用户的要求 |
China National Standards Rough |
English PDF |
GB/T 42157.1-2023 |
Rough terrain forklifts - Non-integrated personnel working platforms - Part 1: Design, safety requirements and verification {译} 越野叉车 非集成式人员工作平台 第1部分:设计、安全要求及验证 |
China National Standards Rough |
English PDF |
GB/T 2523-2022 |
Method for measuring surface Roughness, peak number and waviness of cold-rolled metal sheet and strip {译} 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法 |
China National Standards Rough |
English PDF |
GB/T 5231-2022 |
Designation and chemical composition of wRought copper and copper alloys 加工铜及铜合金牌号和化学成分 |
China National Standards Rough |
English PDF |
GB/T 4296-2022 |
Inspection method for microstructure of wRought magnesium alloy 变形镁合金显微组织检验方法 |
China National Standards Rough |
English PDF |
GB/T 42073-2022 |
Climate Risk Index DRought {译} 气候风险指数 干旱 |
China National Standards Rough |
English PDF |
GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of thRough-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分:弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards Rough |
English PDF |
GB/T 40458-2021 |
Specification of nucleic acid extraction used for high-thRoughput detection of pathogenic microorganisms 用于病原微生物高通量检测的核酸提取技术规范 |
China National Standards Rough |
English PDF |
GB/T 40382-2021 |
Recycling materials for wRought aluminium alloys 再生变形铝合金原料 |
China National Standards Rough |
English PDF |
GB/T 40389-2021 |
Sintered metal materials, excluding hardmetals—Measurement of surface Roughness 烧结金属材料(不包括硬质合金) 表面粗糙度的测定 |
China National Standards Rough |
English PDF |
GB/T 40319-2021 |
WRought aluminum alloy sheets, strips and foils for drawn cans 拉深罐用铝合金板、带、箔材 |
China National Standards Rough |
English PDF |
GB/T 40313-2021 |
Specification for wRought superalloy forging disks 变形高温合金盘锻件 |
China National Standards Rough |
English PDF |
GB/T 5235-2021 |
Designation and chemical composition of wRought nickel and nickel alloy 加工镍及镍合金牌号和化学成分 |
China National Standards Rough |
English PDF |
GB/T 40481-2021 |
Dimensions and performance requirements of general-purpose slip sheet pallets for thRough transit of goods 联运通用滑板托盘尺寸及性能要求 |
China National Standards Rough |
English PDF |
GB/T 40226-2021 |
Detection of environmental microbial metagenome—High thRoughput sequencing 环境微生物宏基因组检测 高通量测序法 |
China National Standards Rough |
English PDF |
GB/T 35205.5-2021 |
Rough-terrain trucks - Safety requirements and verificaiton - Part 5: Interface between variable-reach truck and integrated personnnel work platform 越野叉车 安全要求及验证 第5部分:伸缩臂式叉车和集成式人员工作平台的连接装置 |
China National Standards Rough |
English PDF |
GB/T 10067.36-2021 |
Basic specification for electroheating and electromagnetic processing installations—Part 36:Induction thRough-heating installations 电热和电磁处理装置基本技术条件 第36部分:感应透热装置 |
China National Standards Rough |
English PDF |
GB/T 10066.32-2021 |
Test methods for electroheating and electromagnetic processing installations-Part 32:Induction thRough-heating installations 电热和电磁处理装置的试验方法 第32部分:感应透热装置 |
China National Standards Rough |
English PDF |
GB/T 39741.2-2021 |
Plain bearings—Tolerances—Part 2:Tolerances on geometrical characteristics and surface Roughness for shafts and thrust collars 滑动轴承 公差 第2部分:轴和止推轴肩的几何公差及表面粗糙度 |
China National Standards Rough |
English PDF |
GB/T 38055.5-2021 |
Rough-terrain trucks—User requirements—Part 5: Interface between variable-reach truck and intergrated personnel work platform 越野叉车 对用户的要求 第5部分:伸缩臂式叉车和集成式人员工作平台的连接装置 |
China National Standards Rough |
English PDF |
GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards Rough |
English PDF |
GB/T 35205.7-2021 |
Rough-terrain trucks—Safety requirements and verificaiton—Part 7:longitudinal load moment systems 越野叉车 安全要求及验证 第7部分:纵向载荷力矩系统 |
China National Standards Rough |
English PDF |
GB/T 38490-2021 |
Determination of high-thRoughput adaptive evolution for microorganisms—Microfluidic chip method 微生物高通量适应性进化测定 微流控芯片法 |
China National Standards Rough |
English PDF |
GB/T 41100-2021 |
Earth-moving machinery and Rough-terrain variable-reach trucks -- Design requirements for machines intended to be driven on road 土方机械和越野伸缩臂叉车? 预期公路行驶机器的设计要求 |
China National Standards Rough |
English PDF |
GB/T 40664-2021 |
General requirements for high-thRoughput sequencing technologies of detecting nucleic acid samples 用于高通量测序的核酸类样本质量控制通用要求 |
China National Standards Rough |
English PDF |
GB 31823-2021 |
The norm of energy consumption per unit thRoughout of terminal operation 码头作业单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 39175-2020 |
Roughskin sculpin—Broodstock,fry and fingerling 松江鲈 亲鱼和苗种 |
China National Standards Rough |
English PDF |
GB/T 38982-2020 |
Method of measuring shape and dimension for wRought titanium and titanium alloy products 钛及钛合金加工产品外形尺寸检测方法 |
China National Standards Rough |
English PDF |
GB/T 38958-2020 |
WRought aluminum alloy precision forging—Technological specification 变形铝合金精密锻造 工艺规范 |
China National Standards Rough |
English PDF |
GB/T 11357-2020 |
Quality, Roughness and balance of transmission pulleys 带轮的材质、表面粗糙度及平衡 |
China National Standards Rough |
English PDF |
GB/T 22641-2020 |
WRought aluminium alloy sheets and plates for ships 船用铝合金板材 |
China National Standards Rough |
English PDF |
GB/T 3190-2020 |
Chemical composition of wRought aluminium and aluminium alloys 变形铝及铝合金化学成分 |
China National Standards Rough |
English PDF |
GB/T 5193-2020 |
Method of ultrasonic inspection for wRought titanium and titanium alloy products 钛及钛合金加工产品超声检验方法 |
China National Standards Rough |
English PDF |
GB/T 51396-2019 |
Standard for design of parabolic tRough solar thermal power plant 槽式太阳能光热发电站设计标准 |
China National Standards Rough |
English PDF |
GB 38263-2019 |
The norm of energy consumption per unit thRoughput of cement products 水泥制品单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB 38263-2019 |
The norm of energy consumption per unit thRoughput of cement products 水泥制品单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 37870-2019 |
Individual identification by high-thRoughput sequencing method 个体鉴定的高通量测序方法 |
China National Standards Rough |
English PDF |
GB/T 16649.11-2019 |
Identification cards—Integrated circuit cards—Part 11: Personal verification thRough biometric methods 识别卡 集成电路卡 第11部分:通过生物特征识别方法的身份验证 |
China National Standards Rough |
English PDF |
GB/T 37362.1-2019 |
Paints and varnishes—Drying tests—Part 1: Determination of thRough-dry state and through-dry time 色漆和清漆 干燥试验 第1部分:完全干燥状态和完全干燥时间的测定 |
China National Standards Rough |
English PDF |
GB/T 20174-2019 |
Petroleum drilling and production equipment—Drill-thRough equipment 石油天然气钻采设备 钻通设备 |
China National Standards Rough |
English PDF |
GB/T 36995-2018 |
Wind turbines—Test procedure of voltage fault ride thRough capability 风力发电机组-故障电压穿越能力测试规程 |
China National Standards Rough |
English PDF |
GB/T 2423.7-2018 |
Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品) |
China National Standards Rough |
English PDF |
GB 15210-2018 |
General specification for walk-thRough metal detector 通过式金属探测门通用技术规范 |
China National Standards Rough |
English PDF |
GB/T 36454-2018 |
Information technology—Telecommunications and information exchange between systems—Medium access control and physical layer specifications for middle-high thRoughput wireless local area network 信息技术 系统间远程通信和信息交换 中高速无线局域网媒体访问控制和物理层规范 |
China National Standards Rough |
English PDF |
GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow thRough control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards Rough |
English PDF |
GB/T 6060.1-2018 |
Surface Roughness comparison specimen—Part 1: Casting surface 表面粗糙度比较样块 第1部分:铸造表面 |
China National Standards Rough |
English PDF |
GB/T 4937.15-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for thRough-hole mounted devices 半导体器件 机械和气候试验方法 第15部分:通孔安装器件的耐焊接热 |
China National Standards Rough |
English PDF |
GB/T 35890-2018 |
Technical specification of high thRoughput sequencing data format 高通量测序数据序列格式规范 |
China National Standards Rough |
English PDF |
GB/T 15056-2017 |
Casting surface Roughness—Appraising method 铸造表面粗糙度 评定方法 |
China National Standards Rough |
English PDF |
GB/T 34752-2017 |
Roughskin sculpin 松江鲈 |
China National Standards Rough |
English PDF |
GB/T 34817-2017 |
Warning grade of agricultural dRought 农业干旱预警等级 |
China National Standards Rough |
English PDF |
GB/T 34732-2017 |
Specification of artificial breeding technology of Roughskin sculpin 松江鲈人工繁育技术规范 |
China National Standards Rough |
English PDF |
GB/T 34809-2017 |
DRought grade of sugarcane 甘蔗干旱灾害等级 |
China National Standards Rough |
English PDF |
GB/T 5237.5-2017 |
WRought aluminium alloy extruded profiles for architecture—Part 5: Paint coating profiles 铝合金建筑型材 第5部分:喷漆型材 |
China National Standards Rough |
English PDF |
GB/T 5237.6-2017 |
WRought aluminium alloy extruded profiles for architecture—Part 6: Thermal barrier profiles 铝合金建筑型材 第6部分:隔热型材 |
China National Standards Rough |
English PDF |
GB/T 5237.2-2017 |
WRought aluminium alloy extruded profiles for architecture—Part 2:Anodized profiles 铝合金建筑型材 第2部分:阳极氧化型材 |
China National Standards Rough |
English PDF |
GB/T 5237.3-2017 |
WRought aluminium alloy extruded profiles for architecture—Part 3:Electrodeposition coating profiles 铝合金建筑型材 第3部分:电泳涂漆型材 |
China National Standards Rough |
English PDF |
GB/T 5237.4-2017 |
WRought aluminium alloys extruded profiles for architecture—Part 4: Powder coating profiles 铝合金建筑型材 第4部分:喷粉型材 |
China National Standards Rough |
English PDF |
GB/T 34485-2017 |
Method of ultrasonic inspection for wRought zirconium and zirconium alloy products 锆及锆合金加工产品超声波检测方法 |
China National Standards Rough |
English PDF |
GB/T 13810-2017 |
WRought titanium and titanium alloy for surgical implants 外科植入物用钛及钛合金加工材 |
China National Standards Rough |
English PDF |
GB/T 34640.1-2017 |
Classification and recycling and utilization of wRought aluminium and aluminium alloy scraps—Part 1:Classification of scraps 变形铝及铝合金废料分类、回收与利用 第1部分:废料的分类 |
China National Standards Rough |
English PDF |
GB/T 34640.3-2017 |
Classification and recycling and utilization of wRought aluminium and aluminium alloy scraps—Part 3:Utilization of scraps 变形铝及铝合金废料分类、回收与利用 第3部分:废料的利用 |
China National Standards Rough |
English PDF |
GB/T 34640.2-2017 |
Classification and recycling and utilization of wRought aluminium and aluminium alloy scraps—Part 2:Recycling of scraps 变形铝及铝合金废料分类、回收与利用 第2部分:废料的回收 |
China National Standards Rough |
English PDF |
GB/T 34306-2017 |
Grade of dRought disaster 干旱灾害等级 |
China National Standards Rough |
English PDF |
GB/T 20481-2017 |
Grades of meteorological dRought 气象干旱等级 |
China National Standards Rough |
English PDF |
GB/T 33880-2017 |
WRought aluminium silicon alloy plates and sheets from hot isostatic pressing 热等静压铝硅合金板材 |
China National Standards Rough |
English PDF |
GB/T 33912-2017 |
WRought aluminum and aluminum alloy ingots made of high pure materials 高纯金属为原料的变形铝及铝合金铸锭 |
China National Standards Rough |
English PDF |
GB/T 13477.15-2017 |
Test method for building sealants—Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light thRough glass and to water 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards Rough |
English PDF |
GB 33654-2017 |
The norm of energy consumption per unit thRoughput of gypsum plaster 建筑石膏单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 33651-2017 |
In-situ measurements of heat loss thRough thermal insulation of equipments and pipes—Infra image method 设备及管道绝热层表面热损失现场测定 红外热像法 |
China National Standards Rough |
English PDF |
GB/T 33681.1-2017 |
Methods to prepare samples for high-thRoughput gene sequencing—Part 1:Preparing samples of animal tissues 高通量基因测序样本预处理方法 第1部分:动物组织样本预处理 |
China National Standards Rough |
English PDF |
GB/T 26949.13-2017 |
Industrial trucks—Verification of stability—Part 13: Rough-terrain trucks with mast 工业车辆 稳定性验证 第13部分:带门架的越野型叉车 |
China National Standards Rough |
English PDF |
GB 4234.1-2017 |
Implants for surgery—Metallic materials—Part 1: WRought stainless steel 外科植入物 金属材料 第1部分:锻造不锈钢 |
China National Standards Rough |
English PDF |
GB/T 15544.4-2017 |
Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing thRough earth 三相交流系统短路电流计算 第4部分:同时发生两个独立单相接地故障时的电流以及流过大地的电流 |
China National Standards Rough |
English PDF |
GB/T 35537-2017 |
Requirements of the high-thRoughput gene sequencing result evaluation 高通量基因测序结果评价要求 |
China National Standards Rough |
English PDF |
GB/T 35115-2017 |
Energy efficiency thRough automation systems 工业自动化能效 |
China National Standards Rough |
English PDF |
GB/T 35205.1-2017 |
Rough-terrain trucks-Safety requirements and verification-Part 1:Variable-reach trucks 越野叉车 安全要求及验证 第1部分:伸缩臂式叉车 |
China National Standards Rough |
English PDF |
GB/T 33366-2016 |
WRought aluminium alloy extruded rods and bars for electron enginery-tank 电子机柜用铝合金挤压棒材 |
China National Standards Rough |
English PDF |
GB/T 26949.14-2016 |
Industrial trucks—Verification of stability—Part 14: Rough-terrain variable-reach trucks 工业车辆 稳定性验证 第14部分:越野型伸缩臂式叉车 |
China National Standards Rough |
English PDF |
GB/T 5153-2016 |
Designation and composition of wRought magnesium and magnesium alloys 变形镁及镁合金牌号和化学成分 |
China National Standards Rough |
English PDF |
GB/T 32792-2016 |
Packing,marking,transporting and storing of magnesium alloy wRought products 镁合金加工产品包装、标志、运输、贮存 |
China National Standards Rough |
English PDF |
GB/T 9364.4-2016 |
Miniature fuses—Part 4: Universal modular fuse-links (UMF)—ThRough-hole and surface mount types 小型熔断器 第4部分:通用模件熔断体(UMF) 穿孔式和表面贴装式 |
China National Standards Rough |
English PDF |
GB/T 32642-2016 |
Flat panel displays glass substrate surface Roughness measurement method 平板显示器基板玻璃表面粗糙度的测量方法 |
China National Standards Rough |
English PDF |
GB/T 32189-2015 |
Test method for surface Roughness of GaN single crystal substrate by atomic force microscope 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法 |
China National Standards Rough |
English PDF |
GB/T 6892-2015 |
WRought aluminium and aluminium alloys extruded profiles for general engineering 一般工业用铝及铝合金挤压型材 |
China National Standards Rough |
English PDF |
GB/T 32292-2015 |
Vacuum techology—Ferrofluid rotary feedthRoughs—Generic specification 真空技术 磁流体动密封件 通用技术条件 |
China National Standards Rough |
English PDF |
GB/T 17213.8-2015 |
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow thRough control valves 工业过程控制阀 第8-1部分:噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards Rough |
English PDF |
GB/T 32136-2015 |
Grade of agricultural dRought 农业干旱等级 |
China National Standards Rough |
English PDF |
GB/T 32135-2015 |
Classification of regional dRought severity 区域旱情等级 |
China National Standards Rough |
English PDF |
GB/T 31976-2015 |
Aluminium alloy sheets used for sound-absorbing composite panel with thRough-hole 复合通孔吸声用铝合金板材 |
China National Standards Rough |
English PDF |
GB 31827-2015 |
The norm of energy consumption per unit thRoughout of bulk terminal 干散货码头单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB 31823-2015 |
The norm of energy consumption per unit thRoughout of container terminal 集装箱码头单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 31355-2014 |
Determination of water vapor transmission rate thRough dry packages—Mmodulated infrared sensor 包装件和容器水蒸气透过性测试方法 红外传感器法 |
China National Standards Rough |
English PDF |
GB/T 31354-2014 |
Determination of oxygen transmission rate thRough dry packages―Coulometric sensor 包装件和容器氧气透过性测试方法 库仑计检测法 |
China National Standards Rough |
English PDF |
GB/T 8888-2014 |
WRough heavy non-ferrous metal products-packing,marking,transportation, storing and cetificate of quality 重有色金属加工产品的包装、标志、运输、贮存和质量证明书 |
China National Standards Rough |
English PDF |
GB/T 4996-2014 |
General-purpose flat pallets for thRough transit of goods—Test methods 联运通用平托盘 试验方法 |
China National Standards Rough |
English PDF |
GB/T 31227-2014 |
Test method for the surface Roughness by atomic force microscope for sputtered thin films 原子力显微镜测量溅射薄膜表面粗糙度的方法 |
China National Standards Rough |
English PDF |
GB/T 31226-2014 |
Standard test method for determination of surface Roughness by scanning tunneling microscopy for gas distribution system components 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法 |
China National Standards Rough |
English PDF |
GB/T 31199-2014 |
Surface Roughness parameters measurement for CTP plate substrate 计算机直接制版版基(CTP版基) 表面粗糙度参数的测定 |
China National Standards Rough |
English PDF |
GB/T 4995-2014 |
General-purpose flat pallets for thRough transit of goods―Performance requirements and selection of tests 联运通用平托盘 性能要求和试验选择 |
China National Standards Rough |
English PDF |
GB/T 31148-2014 |
General-purpose flat pallets for thRough transit of goods―Wooden flat pallet 联运通用平托盘 木质平托盘 |
China National Standards Rough |
English PDF |
GB 30872-2014 |
WRought aluminium alloy extruded profiles with acrylic coating for architecture 建筑用丙烯酸喷漆铝合金型材 |
China National Standards Rough |
English PDF |
GB/T 30860-2014 |
Test methods for surface Roughness and saw mark of silicon wafers for solar cells 太阳能电池用硅片表面粗糙度及切割线痕测试方法 |
China National Standards Rough |
English PDF |
GB/T 30989-2014 |
Technical regulation of high-thRoughput gene sequencing 高通量基因测序技术规程 |
China National Standards Rough |
English PDF |
GB/T 30786-2014 |
Paints and varnishes―Guidelines for the introduction of scribe marks thRough coatings on metallic panels for corrosion testing 色漆和清漆 腐蚀试验用金属板涂层划痕标记导则 |
China National Standards Rough |
English PDF |
GB 21351-2014 |
The norm of energy consumption per unit product of wRought aluminium alloy extruded profiles for architecture 铝合金建筑型材单位产品能源消耗限额 |
China National Standards Rough |
English PDF |
GB/T 30467-2013 |
Conversion rule for specific heat consumption and thRoughput of across-flow grain dryer 横流粮食干燥机单位耗热量与处理量折算规则 |
China National Standards Rough |
English PDF |
GB/T 12723-2013 |
General principles for establishing allowance of energy consumption per unit thRoughput 单位产品能源消耗限额编制通则 |
China National Standards Rough |
English PDF |
GB 30078-2013 |
Safety specification for wRought aluminum and aluminum alloy ingots production 变形铝及铝合金铸锭安全生产规范 |
China National Standards Rough |
English PDF |
GB/T 7983-2013 |
Conveyor belts―Transverse flexibility(tRoughability)―Test method 输送带 横向柔性(成槽性) 试验方法 |
China National Standards Rough |
English PDF |
GB/T 6519-2013 |
Ultrasonic inspection of wRought aluminium and magnesium alloy products 变形铝、镁合金产品超声波检验方法 |
China National Standards Rough |
English PDF |
GB/T 16865-2013 |
Test pieces and method for tensile test for wRought aluminium and magnesium alloys products 变形铝、镁及其合金加工制品拉伸试验用试样及方法 |
China National Standards Rough |
English PDF |
GB/T 18423-2013 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids thRough hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards Rough |
English PDF |
GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface Roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards Rough |
English PDF |
GB/T 29505-2013 |
Test method for measuring surface Roughness on planar surfaces of silicon wafer 硅片平坦表面的表面粗糙度测量方法 |
China National Standards Rough |
English PDF |
GB/T 5231-2012 |
Designation and chemical composition of wRought copper and copper alloys 加工铜及铜合金牌号和化学成分 |
China National Standards Rough |
English PDF |
GB/T 4436-2012 |
WRought aluminum and aluminum alloy tubes - Dimensions and deviations 铝及铝合金管材外形尺寸及允许偏差 |
China National Standards Rough |
English PDF |
GB/T 3880.3-2012 |
WRought aluminium and aluminium alloy plates,sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions 一般工业用铝及铝合金板、带材 第3部分:尺寸偏差 |
China National Standards Rough |
English PDF |
GB/T 3880.2-2012 |
WRought aluminium and aluminium alloy plates,sheets and strips for general engineering - Part 2: Mechanical properties 一般工业用铝及铝合金板、带材 第2部分:力学性能 |
China National Standards Rough |
English PDF |
GB/T 3880.1-2012 |
WRought aluminium and aluminium alloy plates,sheets and strips for general engineering - Part 1: Technical conditions of delivery 一般工业用铝及铝合金板、带材 第1部分:一般要求 |
China National Standards Rough |
English PDF |
GB/T 3246.2-2012 |
Inspection method for structure of wRought aluminum and aluminum alloy products - Part 2: Inspection method for macrostructure 变形铝及铝合金制品组织检验方法 第2部分:低倍组织检验方法 |
China National Standards Rough |
English PDF |
GB/T 17432-2012 |
Methods of sampling for analyzing the chemical composition of wRought aluminum and aluminum alloys 变形铝及铝合金化学成分分析取样方法 |
China National Standards Rough |
English PDF |
GB/T 29366-2012 |
Ggrassland dRought grade in the north of China 北方牧区草原干旱等级 |
China National Standards Rough |
English PDF |
GB/T 19317.2-2012 |
Small craft - Seacocks and thRough-hull fittings - Part 2: Non-metallic 小艇 通海旋塞及贯穿艇体的附件 第2部分:非金属件 |
China National Standards Rough |
English PDF |
GB/T 3246.1-2012 |
Inspection method for structure of wRought aluminum and aluminum alloy products Part 1 : Inspection method for microstructure 变形铝及铝合金制品组织检验方法 第1部分:显微组织检验方法 |
China National Standards Rough |
English PDF |
GB 5237.6-2012 |
WRought aluminium alloy extruded profiles for architecture - Part 6: Thermal barrier profiles 铝合金建筑型材 第6部分:隔热型材 |
China National Standards Rough |
English PDF |
GB/T 16474-2011 |
Designation system for wRought aluminium and aluminium alloy 变形铝及铝合金牌号表示方法 |
China National Standards Rough |
English PDF |
GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface Roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards Rough |
English PDF |
GB/T 26612-2011 |
Procedures of ThoRoughbred parentage verification with DNA testing techniques 纯血马DNA亲子鉴定技术规程 |
China National Standards Rough |
English PDF |
GB/T 26492.5-2011 |
Defects of wRought aluminium and aluminium alloys ingots and products - Part 5: Defects for tubes,rods or bars,profiles,wires 变形铝及铝合金铸锭及加工产品缺陷 第5部分:管材、棒材、型材、线材缺陷 |
China National Standards Rough |
English PDF |
GB/T 26492.4-2011 |
Defects of wRought aluminium and aluminium alloys ingots and products - Part 4: Defects for foils 变形铝及铝合金铸锭及加工产品缺陷 第4部分:铝箔缺陷 |
China National Standards Rough |
English PDF |
GB/T 26492.3-2011 |
Defects of wRought aluminium and aluminium alloys ingots and products - Part 3: Defects for plates,sheets and strips 变形铝及铝合金铸锭及加工产品缺陷 第3部分:板、带缺陷 |
China National Standards Rough |
English PDF |
GB/T 26492.2-2011 |
Defects of wRought aluminium and aluminium alloy ingots and products - Part 2: Defects for roll-casting strips 变形铝及铝合金铸锭及加工产品缺陷 第2部分:铸轧带材缺陷 |
China National Standards Rough |
English PDF |
GB/T 26492.1-2011 |
Defects of wRought aluminium and aluminium alloys ingots and products - part 1:Defects for ingots 变形铝及铝合金铸锭及加工产品缺陷 第1部分:铸锭缺陷 |
China National Standards Rough |
English PDF |
GB/T 26284-2010 |
Experimental method for flux inclusions and oxide in wRought magnesium alloys 变形镁合金熔剂、氧化夹杂试验方法 |
China National Standards Rough |
English PDF |
GB/T 26303.3-2010 |
Measuring methods for dimensions and shapes of wRought copper and copper alloys - Part 3: Sheets and strips 铜及铜合金加工材外形尺寸检测方法 第3部分 板带材 |
China National Standards Rough |
English PDF |
GB/T 26303.2-2010 |
Measuring methods for dimensions and shapes of wRought copper and copper alloy - Part 2: Rod,wire and profile 铜及铜合金加工材外形尺寸检测方法 第2部分 棒、线、型材 |
China National Standards Rough |
English PDF |
GB/T 26303.1-2010 |
Measuring method for dimensions and shapes of wRought copper and copper alloy - Part 1: Tube 铜及铜合金加工材外形尺寸检测方法 第1部分 管材 |
China National Standards Rough |
English PDF |
GB/T 24218.8-2010 |
Textiles - Test methods for nonwovens - Part 8:Determination of liquid strike-thRough time (simulated urine) 纺织品 非织造布试验方法 第8部分:液体穿透时间的测定(模拟尿液) |
China National Standards Rough |
English PDF |
GB/T 24218.13-2010 |
Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-thRough time 纺织品 非织造布试验方法 第13部分:液体多次穿透时间的测定 |
China National Standards Rough |
English PDF |
GB/T 17213.17-2010 |
Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow thRough multistage control valves with interstage recovery 工业过程控制阀 第2-5部分:流通能力 流体流经级间恢复多级控制阀的计算公式 |
China National Standards Rough |
English PDF |
GB/T 17793-2010 |
WRought copper and copper alloy plate,sheet and strip for general purposes - Dimensions and tolerances 加工铜及铜合金板带材 外形尺寸及允许偏差 |
China National Standards Rough |
English PDF |
GB/T 25753.2-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero thRoughput 真空技术 罗茨真空泵性能测量方法 第2部分:零流量压缩比的测量 |
China National Standards Rough |
English PDF |
GB/T 5313-2010 |
Steel plates with thRough-thickness characteristics 厚度方向性能钢板 |
China National Standards Rough |
English PDF |
GB/T 25951.3-2010 |
Nickel and nickel alloys - Terms and definitions - Part 3: WRought products and castings 镍及镍合金 术语和定义 第3部分:加工产品和铸件 |
China National Standards Rough |
English PDF |
GB/T 25352-2010 |
Test method to determine the burnthRough resistance of thermal/acoustic insulation materials 隔热隔音材料耐烧穿试验方法 |
China National Standards Rough |
English PDF |
GB/T 25430-2010 |
Specification for drill thRough equipment - Rotating control devices 钻通设备 旋转防喷器规范 |
China National Standards Rough |
English PDF |
GB 24627-2009 |
Standard specification for wRought nickel-titanium shape memory alloys for medical devices and surgical implants 医疗器械和外科植入物用镍-钛形状记忆合金加工材 |
China National Standards Rough |
English PDF |
GB/T 23612-2009 |
Anodizing and electrophoretic painting technical specification on wRought aluminium alloy extruded profiles for architecture 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范 |
China National Standards Rough |
English PDF |
GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards Rough |
English PDF |
GB/T 1031-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Surface Roughness parameters and their values 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 |
China National Standards Rough |
English PDF |
GB/T 21412.3-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: ThRough flowline (TFL) systems 石油天然气工业 水下生产系统的设计与操作 第3部分:过出油管(TFL)系统 |
China National Standards Rough |
English PDF |
GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface Roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法 |
China National Standards Rough |
English PDF |
GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface Roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards Rough |
English PDF |
GB 23102-2008 |
Implants for surgery - Metallic materials - WRought titanium -6aluminium-7niobium alloy 外科植入物 金属材料 Ti-6Al-7Nb合金加工材 |
China National Standards Rough |
English PDF |
GB/T 22881-2008 |
Paper and board - Determination of Roughness/smoothness(air leak methods) - General method 纸和纸板 粗糙度(平滑度)的测定(空气泄漏法) 通用方法 |
China National Standards Rough |
English PDF |
GB/T 22641-2008 |
WRought aluminium alloys sheet and plate for ships 船用铝合金板材 |
China National Standards Rough |
English PDF |
GB/T 22640-2008 |
Test method of C-Ring sample to stress-corrosion cracking for wRought aluminium and aluminium alloys products 铝合金加工产品的环形试样应力腐蚀试验方法 |
China National Standards Rough |
English PDF |
GB/T 22639-2008 |
Test method of exfoliation corrosion for wRought aluminium and aluminium alloys 铝合金加工产品的剥落腐蚀试验方法 |
China National Standards Rough |
English PDF |
GB/T 22481-2008 |
Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-dimensional air flow thRough bulk grain 谷物、油料和豆类 单向气流穿过散粮的单位压力损失测定 |
China National Standards Rough |
English PDF |
GB/T 2523-2008 |
Measuring method of surface Roughness and peak count for cold-rolled metal sheet (strip) 冷轧金属薄板(带)表面粗糙度和峰值数的测量方法 |
China National Standards Rough |
English PDF |
GB 5237.5-2008 |
WRought aluminium alloy extruded profiles for architecture - Part 5: PVDF coating profiles 铝合金建筑型材 第5部分:氟碳漆喷涂型材 |
China National Standards Rough |
English PDF |
GB 5237.4-2008 |
WRought aluminium alloy extruded profiles for architecture - Part 4:Powder coating profiles 铝合金建筑型材 第4部分:粉末喷涂型材 |
China National Standards Rough |
English PDF |
GB 5237.3-2008 |
WRought aluminium alloy extruded profiles for architeature - Part 3: Electrophoretic coating profiles 铝合金建筑型材 第3部分:电泳涂漆型材 |
China National Standards Rough |
English PDF |
GB 5237.2-2008 |
WRought aluminium alloy extruded profiles for architecture - Part 2: Anodized profiles 铝合金建筑型材 第2部分:阳极氧化型材 |
China National Standards Rough |
English PDF |
GB 5237.1-2008 |
WRought aluminium alloy extruded profiles for architecture - Part 1: Mill finish profiles 铝合金建筑型材 第1部分:基材 |
China National Standards Rough |
English PDF |
GB/T 22363-2008 |
Paper and board - Determination of Roughness (air leak methods) - Bendtsen method and print-surf method 纸和纸板粗糙度的测定(空气泄漏法) 本特生法和印刷表面法 |
China National Standards Rough |
English PDF |
GB/T 9910-2008 |
Shipbuilding - Clear openings thRough frames for external single - Leaf doors 船用外部单扇门门框通孔 |
China National Standards Rough |
English PDF |
GB/T 16685-2008 |
Information technology - Office equipment - Printing devices Method for measuring thRoughput - Class 1 and Class 2 printers 信息技术 办公设备 打印设备 吞吐量的测量方法 1类和2类打印机 |
China National Standards Rough |
English PDF |
GB/T 17357-2008 |
In-situ measurements of heat loss thRough thermal insulation of equipments and pipes - Heat flow meter apparatus and surface temperature method 设备及管道绝热层表面热损失现场测定 热流计法和表面温度法 |
China National Standards Rough |
English PDF |
GB/T 22043-2008 |
Clothing - Electrostatic properties - Test method for measurement of the electrical resistance thRough a material(vertical resistance) 服装 防静电性能 通过材料的电阻(垂直电阻)试验方法 |
China National Standards Rough |
English PDF |
GB/T 3190-2008 |
WRought aluminium and aluminium alloy - Chemical composition 变形铝及铝合金化学成分 |
China National Standards Rough |
English PDF |
GB/T 16475-2008 |
Temper designation system for wRought aluminium and aluminium alloy 变形铝及铝合金状态代号 |
China National Standards Rough |
English PDF |
GB/T 14328-2008 |
Roughing end mill 粗加工立铣刀 |
China National Standards Rough |
English PDF |
GB/T 21800-2008 |
Testing of chemicals Bioconcentration - Flow-thRough fish test 化学品 生物富集 流水式鱼类试验 |
China National Standards Rough |
English PDF |
GB/T 11357-2008 |
Quality, Roughness and balance of transmission pulleys 带轮的材质、表面粗糙度及平衡 |
China National Standards Rough |
English PDF |
GB/T 13288.1-2008 |
Preparation of steel substrates before application of paints and related products-Surface Roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards Rough |
English PDF |
GB/T 6060.3-2008 |
Surface Roughness comparison specimen - Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed and polished surface 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面 |
China National Standards Rough |
English PDF |
GB/T 5193-2007 |
Method of ultrasonic inspection for wRought titanium and titanium alloy products 钛及钛合金加工产品超声波探伤方法 |
China National Standards Rough |
English PDF |
GB/T 13810-2007 |
WRought titanium and titanium alloy for surgical implants 外科植入物用钛及钛合金加工材 |
China National Standards Rough |
English PDF |
GB/T 21162-2007 |
Conversion rule for specific heat consumption and thRoughput of concurrent - Flow grain dryer 顺流粮食干燥机单位耗热量与处理量折算规则 |
China National Standards Rough |
English PDF |
GB/T 10567.2-2007 |
WRought copper and copper alloys - Detection of residual stress - Ammonia test 铜及铜合金加工材残余应力检验方法 氨薰试验法 |
China National Standards Rough |
English PDF |
GB/T 21127-2007 |
Technical specification of identification and evaluation for dRought resistance in wheat 小麦抗旱性鉴定评价技术规范 |
China National Standards Rough |
English PDF |
GB/T 2934-2007 |
General-purpose flat pallets for thRough transit of goods - Principal dimensions and tolerances 联运通用平托盘 主要尺寸及公差 |
China National Standards Rough |
English PDF |
GB/T 8180-2007 |
WRought titanium and titanium alloy products packing, marking, transporting and storing 钛及钛合金加工产品的包装、标志、运输和贮存 |
China National Standards Rough |
English PDF |
GB/T 5235-2007 |
WRought nickel and nickel alloys - Chemical composition and forms of wrought products 加工镍及镍合金 化学成分和产品形状 |
China National Standards Rough |
English PDF |
GB/T 3620.2-2007 |
Titanium and titanium alloys-permissible variations of chemical composition for wRought product analysis 钛及钛合金加工产品化学成分允许偏差 |
China National Standards Rough |
English PDF |
GB/T 3199-2007 |
WRought aluminium and aluminium alloy products - Packing,marking,transporting and storing 铝及铝合金加工产品包装、标志、运输、贮存 |
China National Standards Rough |
English PDF |
GB/T 6892-2006 |
WRought aluminium and aluminium alloys extruded profiles for general engineering 一般工业用铝及铝合金挤压型材 |
China National Standards Rough |
English PDF |
GB/T 20481-2006 |
Classification of meteorological dRought category 气象干旱等级 |
China National Standards Rough |
English PDF |
GB/T 3618-2006 |
WRought aluminium and aluminium alloys tread sheets 铝及铝合金花纹板 |
China National Standards Rough |
English PDF |
Find out:234Items | To Page of: First -Previous-Next -Last | 1 2 |