Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43786-2024 |
Audio, video and information technology equipment - Routine electrical safety tests during production {译} 音频、视频和信息技术设备-生产过程中的例行电气安全试验 |
China National Standards Routine |
 English PDF |
| GB/T 19042.6-2023 |
Evaluation and Routine testing of medical imaging departments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in breast tomosynthesis imaging mode {译} 医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验 |
China National Standards Routine |
English PDF |
| GB 18279-2023 |
Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and Routine control of medical device sterilization processes {译} 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards Routine |
English PDF |
| GB/T 19042.5-2022 |
Evaluation and Routine tests in medical imaging sector - Part 3-5: X-ray computed tomography equipment imaging performance acceptance test and stability test {译} 医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验与稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 38939-2020 |
Nickel-based alloy—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(Routine method) 镍基合金 多元素含量的测定 火花放电原子发射光谱分析法（常规法） |
China National Standards Routine |
English PDF |
| GB/T 20730.2-2019 |
Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems—Part 2:Guidance for inspection and Routine testing 工业过程控制系统用模拟输入两位或多位输出仪表 第2部分:检查和例行试验导则 |
China National Standards Routine |
English PDF |
| GB/T 19974-2018 |
Sterilization of health care products—General requirement for characterization of a sterilization agent and the development,validation and Routine control of a sterilization process for medical devices 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌过程的开发、确认和常规控制的通用要求 |
China National Standards Routine |
English PDF |
| GB/T 36164-2018 |
High alloy steel—Determination of multi-element contents—X-ray fluorescence spectrometry (Routine method) 高合金钢 多元素含量的测定 X射线荧光光谱法(常规法) |
China National Standards Routine |
English PDF |
| GB/T 36011-2018 |
Sampling check and Routine test method for programmable controller 可编程序控制器抽样检查和例行试验方法 |
China National Standards Routine |
English PDF |
| GB/T 33905.5-2017 |
Intelligent sensor—Part 5：Methods for inspection and Routine testing 智能传感器 第5部分：检查和例行试验方法 |
China National Standards Routine |
English PDF |
| GB/T 33885-2017 |
Non-destructive testing instruments—General requirements for sampling,Routine inspection and type inspection 无损检测仪器 抽样、出厂检验、型式检验基本要求 |
China National Standards Routine |
English PDF |
| GB/T 51168-2016 |
Technical code for Routine maintenance and rejuvenation engineering of historic trees in the city 城市古树名木养护和复壮工程技术规范 |
China National Standards Routine |
English PDF |
| GB/T 4336-2016 |
Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (Routine method) 碳素钢和中低合金钢 多元素含量的测定 火花放电原子发射光谱法（常规法） |
China National Standards Routine |
English PDF |
| GB 18280.1-2015 |
Sterilization of health care products—Radiation—Part 1：Requirements for development，validation and Routine control of a sterilization process for medical devices 医疗保健产品灭菌 辐射 第1部分：医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards Routine |
English PDF |
| GB/T 20013.3-2015 |
Nuclear medicine instrumentation—Routine tests—Part 3: Positron emission tomographs 核医学仪器 例行试验 第3部分：正电子发射断层成像装置 |
China National Standards Routine |
English PDF |
| GB 18279.1-2015 |
Sterilization of health care products—Ethylene oxide—Part 1: Requirements for development,validation and Routine control of a sterilization process for medical devices 医疗保健产品灭菌 环氧乙烷 第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求 |
China National Standards Routine |
English PDF |
| GB 18278.1-2015 |
Sterilization of health care products—Moist heat—Part 1: Requirements for the development, validation and Routine control of a sterilization process for medical devices 医疗保健产品灭菌 湿热 第1部分：医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards Routine |
English PDF |
| GB/T 17006.11-2015 |
Evaluation and Routine testing in medical imaging departments—Part 2-6: Constancy tests—Imaging performance of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第2-6部分：X射线计算机体层摄影设备成像性能稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 17213.4-2015 |
Industrial-process control valves—Part 4: Inspection and Routine testing 工业过程控制阀 第4部分：检验和例行试验 |
China National Standards Routine |
English PDF |
| GB/T 20819.2-2015 |
Controllers with analogue signals for use in industrial-process control systems—Part 2: Guidance for inspection and Routine testing 工业过程控制系统用模拟信号调节器 第2部分：检查和例行试验导则 |
China National Standards Routine |
English PDF |
| GB/T 27411-2012 |
Routine methods for evaluation and expression of measurement uncertainty in testing laboratory 检测实验室中常用不确定度评定方法与表示 |
China National Standards Routine |
English PDF |
| GB/T 24618-2009 |
Routine analytical cigarette-smoking machine - Additional test methods 常规分析用吸烟机 附加测试方法 |
China National Standards Routine |
English PDF |
| GB/T 6730.65-2009 |
Iron ores - Determination of total iron content - Titanium(III) chloride reduction potassium dichromate titration methods（Routine methods） 铁矿石 全铁含量的测定 三氯化钛还原重铬酸钾滴定法（常规方法） |
China National Standards Routine |
English PDF |
| GB/T 24234-2009 |
Cast iron - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) 铸铁 多元素含量的测定 火花放电原子发射光谱法(常规法) |
China National Standards Routine |
English PDF |
| GB/T 24198-2009 |
Ferronickel - Determination of nickel, silicon, phosphorus, manganese, cobalt, chromium, and copper contents - Wavelength dispersive X-ray fluorescence spectrometry（Routine method） 镍铁 镍、硅、磷、锰、钴、铬和铜含量的测定 波长色散X-射线荧光光谱法(常规法) |
China National Standards Routine |
English PDF |
| GB/T 23804-2009 |
General specifications for Routine core analysis instruments 岩心常规分析仪器通用技术条件 |
China National Standards Routine |
English PDF |
| GB/T 22368-2008 |
Low-alloy steel - Determination of multi-element contents - Glow discharge optical emission spectrometry（Routine method） 低合金钢 多元素含量的测定 辉光放电原子发射光谱法（常规法） |
China National Standards Routine |
English PDF |
| GB/T 11170-2008 |
Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) 不锈钢 多元素含量的测定 火花放电原子发射光谱法（常规法） |
China National Standards Routine |
English PDF |
| GB/T 17614.2-2008 |
Transmitters for use industrial-process control systems - Part 2: Methods for inspection and Routine testing 工业过程控制系统用变送器 第2部分: 检查和例行试验方法 |
China National Standards Routine |
English PDF |
| GB/T 21305-2007 |
Cereals and cereal products - Determination of moisture content - Routine reference method 谷物及谷物制品水分的测定 常规法 |
China National Standards Routine |
English PDF |
| GB/T 3386.2-2007 |
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 2: Guidance for inspection and Routine testing 工业过程控制系统用电动和气动模拟图纸记录仪 第2部分：检查和例行试验导则 |
China National Standards Routine |
English PDF |
| GB/T 223.79-2007 |
Iron and steel - Determination of multi - element contents - X - ray fluorescence spectrometry (Routine method) 钢铁 多元素含量的测定 X-射线荧光光谱法（常规法） |
China National Standards Routine |
English PDF |
| GB/T 20819.2-2007 |
Controllers with analogue signals for use industrial-process control system - Part 2: Guidance for inspection and Routine testing 工业过程控制系统用模拟信号控制器 第2部分：检查和例行试验导则 |
China National Standards Routine |
English PDF |
| GB/T 19042.5-2006 |
Evaluation and Routine testing in medical imaging departments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验 |
China National Standards Routine |
English PDF |
| GB/T 20367-2006 |
Sterilization of health care products - Requirement for validation and Routine control of moist heat sterilization in health care facilities 医疗保健产品灭菌 医疗保健机构湿热灭菌的确认和常规控制要求 |
China National Standards Routine |
English PDF |
| GB/T 20124-2006 |
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 钢铁 氮含量的测定 惰性气体熔融热导法（常规方法） |
China National Standards Routine |
English PDF |
| GB/T 20123-2006 |
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (Routine method) 钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法（常规方法） |
China National Standards Routine |
English PDF |
| GB/T 19974-2005 |
Sterilization of health care products -- General requirement for characterization of a sterilizing agent and the development ,validation and Routine control of a sterilization process for medical devices 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌工艺的设定、确认和常规控制的通用要求 |
China National Standards Routine |
English PDF |
| GB/T 20013.2-2005 |
Nuclear medicine instrumentation -- Routine test -- Part 2: Scintillation cameras and single photon emission computed tomography imaging (SPECT) 核医学仪器 例行试验 第2部分：闪烁照相机和单光子发射计算机断层成像装置 |
China National Standards Routine |
English PDF |
| GB/T 20013.1-2005 |
Nuclear medicine instrumentation -- Routine test -- Part 1: Radiation counting system 核医学仪器 例行试验 第1部分：辐射计数系统 |
China National Standards Routine |
English PDF |
| GB/T 17213.4-2005 |
Industrial-process control valves Part 4:Inspection and Routine testing 工业过程控制阀 第4部分：检验和例行试验 |
China National Standards Routine |
English PDF |
| GB/T 19042.4-2005 |
Evaluation and Routine testing in medical imaging departments-Part 3-4:Acceptance tests-Imaging performance of dental X-ray equipment 医用成像部门的评价及例行试验 第3-4部分:牙科X射线设备成像性能验收试验 |
China National Standards Routine |
English PDF |
| GB/T 19042.3-2005 |
Evaluation and Routine testing in medical imaging departments-Part 3-3:Acceptance tests-Imaging performance of X-ray equipment for digital subtraction angiography(DSA) 医用成像部门的评价及例行试验 第3-3部分:数字减影血管造影（DSA）X射线设备成像性能验收试验 |
China National Standards Routine |
English PDF |
| GB/T 19042.2-2005 |
Evaluation and Routine testing in medical imaging departments-Part 3-2:Acceptance tests-Imaging performance of mammographic X-ray equipment 医用成像部门的评价及例行试验 第3-2部分:乳腺摄影X射线设备成像性能验收试验 |
China National Standards Routine |
English PDF |
| GB/T 19609-2004 |
Cigarette--Determination of total and nicotine-free dry particulate matter using a Routine analytical smoking machine 卷烟 用常规分析用吸烟机测定 总粒相物和焦油 |
China National Standards Routine |
English PDF |
| GB/T 16450-2004 |
Routine analytical cigarette-smokingmachine-Definitions and standard conditions 常规分析用吸烟机 定义和标准条件 |
China National Standards Routine |
English PDF |
| GB/T 17006.9-2003 |
Evaluation and Routine testing in medical imaging departments--Part 2-10: Constancy tests--X-ray equipment for mammography 医用成像部门的评价及例行试验 第2-10部分:稳定性试验 乳腺X射线摄影设备 |
China National Standards Routine |
English PDF |
| GB/T 17006.8-2003 |
Evaluation and Routine testing in medical imaging departments--Part 2-9: Constancy tests--Equipment for indirect radioscopy and indirect radiography 医用成像部门的评价及例行试验 第2-9部分: 稳定性试验 间接透视和间接摄影X射线设备 |
China National Standards Routine |
English PDF |
| GB/T 17006.7-2003 |
Evaluation and Routine testing in medical imaging departments--Part 2-7: Constancy tests--Equipment for intra-oral dental radiography excluding dental panoramic equipment 医用成像部门的评价及例行试验 第2-7部分: 稳定性试验 口内牙科X射线摄影设备不包括牙科全景设备 |
China National Standards Routine |
English PDF |
| GB/T 17006.10-2003 |
Evaluation and Routine testing in medical imaging departments--Part 2-11: Constancy tests--Equipment for general direct radiography 医用成像部门的评价及例行试验 第2-11部分:稳定性试验 普通直接摄影X射线设备 |
China National Standards Routine |
English PDF |
| GB/T 19042.1-2003 |
Evaluation and Routine testing in medical imaging departments--Part 3-1: Acceptance test--Imaging performance of X-ray equipment for radiographic and radioscopic systems 医用成像部门的评价及例行试验 第3-1部分:X射线摄影和透视系统用X射线设备成像性能验收试验 |
China National Standards Routine |
English PDF |
| GB/T 17006.6-2003 |
Evaluation and Routine testing in medical imaging departments--Part 2-4 Constancy tests--Hard copy cameras 医用成像部门的评价及例行试验 第2-4部分: 硬拷贝照相机稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 4336-2002 |
Standard testmethod for spark discharge atomic emission--Spectrometric analysis of carbon and low-alloy steel(Routine method) 碳素钢和中低合金钢 火花源原子发射光谱分析方法(常规法) |
China National Standards Routine |
English PDF |
| GB/T 14924.9-2001 |
Laboratory animals--Formula feeds--Determination of Routine nutrients 实验动物 配合饲料 常规营养成分的测定 |
China National Standards Routine |
English PDF |
| GB 18280-2000 |
Sterilization of healthcare products--Requirement for validation and Routine control--Radiation sterilization 医疗保健产品灭菌 确认和常规控制要求 辐射灭菌 |
China National Standards Routine |
English PDF |
| GB 18279-2000 |
Medical devices--Validation andRoutine control of ethylene oxide sterilization 医疗器械 环氧乙烷灭菌 确认和常规控制 |
China National Standards Routine |
English PDF |
| GB 18278-2000 |
Sterilization of health care products--Requirements for validation and Routine control--Industrial moist heat sterilization 医疗保健产品灭菌 确认和常规控制要求 工业湿热灭菌 |
China National Standards Routine |
English PDF |
| GB/T 17006.5-2000 |
Evaluation and Routine testing in medical imaging departments--Part 2-5:Constancytests--Image display devices 医用成像部门的评价及例行试验 第2-5部分:图像显示装置稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 17006.4-2000 |
Evaluation and Routine testing in medical imaging departments--Part 2-3:Constancy tests--Darkroom safelight conditions 医用成像部门的评价及例行试验 第2-3部分:暗室安全照明状态稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 17006.3-2000 |
Evaluation and Routine testing in medical imaging departments--Part 2-2:Constancy tests--Radio-graphic cassettes and film changers--Film-screen contact and relative sensitivity of the screen-cassette assembly 医用成像部门的评价及例行试验 第2-2部分:X射线摄影暗匣和换片器 屏-片接触和屏-匣组件相对灵敏度稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 17006.2-2000 |
Evaluation and Routine testing in medical imaging departments--Part 2-1:Constancy tests--Film processors 医用成像部门的评价及例行试验 第2-1部分:洗片机稳定性试验 |
China National Standards Routine |
English PDF |
| GB/T 17006.1-2000 |
Evaluation and Routine testing in medical imaging departments--Part 1:General aspects 医用成像部门的评价及例行试验 第1部分:总则 |
China National Standards Routine |
English PDF |
| GB/T 17006-1997 |
Evaluation and Routine testing in medical imaging departments--Part 2-6:Constancy tests--X-ray equipment for computed tomography 医用成像部门的评价及例行试验 第2-6部分:X射线计算机体层摄影设备稳定性试验 |
China National Standards Routine |
English PDF |
| Find out:63Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
