Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 17737.10-2024 |
Coaxial communication cables - Part 10: Sectional specification for fluoropolymer insulated semi-rigid cables {译} 同轴通信电缆-第10部分:含氟聚合物绝缘半硬电缆分规范 |
China National Standards Section |
English PDF |
GB/T 17737.11-2024 |
Coaxial communication cables - Part 11: Sectional specification for polyethylene insulated semi-rigid cables {译} 同轴通信电缆-第11部分:聚乙烯绝缘半硬电缆分规范 |
China National Standards Section |
English PDF |
GB/T 17737.9-2024 |
Coaxial communication cables - Part 9: Sectional specification for flexible radio frequency coaxial cables {译} 同轴通信电缆-第9部分:柔软射频同轴电缆分规范 |
China National Standards Section |
English PDF |
GB/T 18910.2-2024 |
Liquid crystal display devices - Part 2: Liquid crystal display modules - Sectional specifications {译} 液晶显示器件-第2部分:液晶显示模块-分规范 |
China National Standards Section |
English PDF |
GB/T 18910.3-2024 |
Liquid crystal display devices - Part 3: Liquid crystal display screens - Sectional specifications {译} 液晶显示器件-第3部分:液晶显示屏-分规范 |
China National Standards Section |
English PDF |
GB/T 43799-2024 |
Sectional specification for high-density interconnect printed boards {译} 高密度互连印制板分规范 |
China National Standards Section |
English PDF |
GB/T 43246-2023 |
Technical requirements for manufacturing supervision of full-Section tunnel boring machines {译} 全断面隧道掘进机制造监理技术要求 |
China National Standards Section |
English PDF |
GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-Sectional images of layered materials {译} 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards Section |
English PDF |
GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-Section pipe filled with fluid {译} 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards Section |
English PDF |
GB/T 19215.5-2023 |
Cable duct systems for electrical installations - Part 2: Particular requirements - Section 3: Grooved cable duct systems for installation in cabinets {译} 电气安装用电缆槽管系统 第2部分:特殊要求 第3节:安装在机柜中的带槽电缆线槽系统 |
China National Standards Section |
English PDF |
GB/T 6346.14-2023 |
Fixed capacitors for electronic equipment - Part 14: Sectional specification Fixed capacitors for suppressing electromagnetic interference in power supplies {译} 电子设备用固定电容器 第14部分:分规范 抑制电源电磁干扰用固定电容器 |
China National Standards Section |
English PDF |
GB/T 17737.8-2022 |
Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8部分:聚四氟乙烯绝缘半柔电缆分规范 |
China National Standards Section |
English PDF |
GB/T 23662-2022 |
Rubber seals for expansion joints in concrete road Sections {译} 混凝土路段伸缩缝用橡胶密封件 |
China National Standards Section |
English PDF |
GB/T 41749-2022 |
General requirements for surface quality of hot-rolled Section steel {译} 热轧型钢表面质量一般要求 |
China National Standards Section |
English PDF |
GB/T 40304-2021 |
Determination of content of nonmetallic inclusions in steel—Billet full Section method 钢中非金属夹杂物含量的测定 钢坯全截面法 |
China National Standards Section |
English PDF |
GB/T 10715-2021 |
Belt drives—V-ribbed belts, joined V-belts and V-belts including wide Section belts and hexagonal belts—Electrical conductivity of antistatic belts: Characteristics and methods of test 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法 |
China National Standards Section |
English PDF |
GB/T 11313.41-2021 |
Radio-frequency connectors—Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors 射频连接器 第41部分: CQA系列快速锁紧射频连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.40-2021 |
Radio-frequency connectors—Part 40: Sectional specification for 2.4 series R.F. connectors 射频连接器 第40部分: 2.4系列射频连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.35-2021 |
Radio-frequency connectors—Part 35: Sectional specification for 2.92 series R.F connectors 射频连接器 第35部分: 2.92系列射频连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.42-2021 |
Radio-frequency connectors -- Part 42: Sectional specification for CQN series quick lock RF connectors 射频连接器 第42部分:CQN系列快速锁紧射频连接器分规范 |
China National Standards Section |
English PDF |
GB/T 19290.7-2021 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5:Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabine tinterface dimensions for miscellaneous equipment 发展中的电子设备构体机械结构模数序列 第2-5部分:分规范 25 mm设备构体的接口协调尺寸 各种设备用机柜接口尺寸 |
China National Standards Section |
English PDF |
GB/T 12274.4-2021 |
Quartz crystal controlled oscillators of assessed quality—Part 4: Sectional specification—Capability approval 有质量评定的石英晶体振荡器 第4部分:分规范 能力批准 |
China National Standards Section |
English PDF |
GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第24部分:分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards Section |
English PDF |
GB/T 40562-2021 |
Potentiometers for use in electronic equipment—Part 6:Sectional specification—Surface mount preset potentiometers 电子设备用电位器 第6部分:分规范 表面安装预调电位器 |
China National Standards Section |
English PDF |
GB/T 39214-2020 |
Integrity requirements of Section fabrication for ship 船舶总段制造完整性要求 |
China National Standards Section |
English PDF |
GB/T 38902-2020 |
Determination of hollow fiber membrane cross-Section dimensions—Image analysis method 中空纤维膜丝截面结构尺寸的测定 图像分析法 |
China National Standards Section |
English PDF |
GB/T 38808-2020 |
Waves webs Section steel for building structures 建筑结构用波纹腹板型钢 |
China National Standards Section |
English PDF |
GB/T 14515-2019 |
Sectional specification for single and double sided flexible printed board 单、双面挠性印制板分规范 |
China National Standards Section |
English PDF |
GB/T 19290.6-2018 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-4: Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Adaptation dimensions for subracks or chassis applica 发展中的电子设备构体机械结构模数序列-第2-4部分:分规范-25-mm设备构体的接口协调尺寸-适用于符合IEC-60297-3-100(19-in)机柜或机架的插箱或机箱的适配尺寸 |
China National Standards Section |
English PDF |
GB/T 36981-2018 |
Railway applications—Technical criteria for the co-ordinations in the passenger train neutral-Section passing system with no power consumption 轨道交通-客运列车断电过分相系统相互匹配准则 |
China National Standards Section |
English PDF |
GB/T 11498-2018 |
Semiconductor devices—Integrated circuits—Part 21:Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序) |
China National Standards Section |
English PDF |
GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第26部分:分规范 导电高分子固体电解质铝固定电容器 |
China National Standards Section |
English PDF |
GB/T 11313.38-2018 |
Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications 射频连接器 第38部分: 50Ω背板和面板用模块滑入式射频连接器(TMA型)分规范 |
China National Standards Section |
English PDF |
GB/T 36524-2018 |
Tools for pressing—Compression springs with rectangular Section—Housing dimensions and colour coding 冲模 矩形截面压缩弹簧 安装尺寸和颜色标识 |
China National Standards Section |
English PDF |
GB/T 11313.11-2018 |
Radio-frequency connectors—Part 11:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) 射频连接器 第11部分:外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范 |
China National Standards Section |
English PDF |
GB/T 11313.13-2018 |
Radio-frequency connectors—Part 13:Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors 射频连接器 第13部分:1.6/5.6和1.8/5.6型射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.43-2018 |
Radio-frequency connectors—Part 43:Sectional specification for RBMA series blind mating RF coaxial connectors 射频连接器 第43部分:RBMA系列盲配射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25-1部分:空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards Section |
English PDF |
GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25部分:分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards Section |
English PDF |
GB/T 11313.39-2018 |
Radio frequency connectors—Part 39: Sectional specification for CQM series quick lock RF connectors 射频连接器 第39部分:CQM系列快速锁紧射频连接器分规范 |
China National Standards Section |
English PDF |
GB/T 34199-2017 |
Hot-rolled H Section steel for electrified railway pillars 电气化铁路接触网支柱用热轧H型钢 |
China National Standards Section |
English PDF |
GB/T 2101-2017 |
General requirment of acceptance, packaging, marking and certification for Section steel 型钢验收、包装、标志及质量证明书的一般规定 |
China National Standards Section |
English PDF |
GB/T 34103-2017 |
Hot rolled H Section steel for ocean engineering structure 海洋工程结构用热轧H型钢 |
China National Standards Section |
English PDF |
GB/T 19215.4-2017 |
Cable trunking and ducting systems for electrical installations—Part 2: Particular requirements—Section 4:Service poles 电气安装用电缆槽管系统 第2部分:特殊要求 第4节:辅助端 |
China National Standards Section |
English PDF |
GB/T 4588.4-2017 |
Sectional specification for rigid multilayer printed boards 刚性多层印制板分规范 |
China National Standards Section |
English PDF |
GB/T 33968-2017 |
Hot rolled steel Sections with improved weldability 改善焊接性能热轧型钢 |
China National Standards Section |
English PDF |
GB/T 33976-2017 |
Corrosion resistant hot rolled Section steel for cargo oil tanks 原油船货油舱用耐腐蚀热轧型钢 |
China National Standards Section |
English PDF |
GB/T 6728-2017 |
Cold forming hollow Sectional steel for general structure 结构用冷弯空心型钢 |
China National Standards Section |
English PDF |
GB/T 4697-2017 |
Hot rolled steel Section for mine timbering 矿山巷道支护用热轧型钢 |
China National Standards Section |
English PDF |
GB/T 33814-2017 |
Welded H-Section steel 焊接H型钢 |
China National Standards Section |
English PDF |
GB/T 6725-2017 |
General requirements of cold forming steel Sections 冷弯型钢通用技术要求 |
China National Standards Section |
English PDF |
GB/T 11263-2017 |
Hot rolled H and cut T Section steel 热轧H型钢和剖分T型钢 |
China National Standards Section |
English PDF |
GB/T 6723-2017 |
Cold forming open Section steel for general structure 通用冷弯开口型钢 |
China National Standards Section |
English PDF |
GB/T 1563-2017 |
Taper keys—Cross Section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards Section |
English PDF |
GB/T 33520-2017 |
Drive shaft T-Section tooth 传动轴T型端面齿 |
China National Standards Section |
English PDF |
GB/T 18015.7-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 7: Symmetrical pair/quad cables with transmission characteristics up to 1 200MHz—Sectional specification for digital and analog communication cables 数字通信用对绞或星绞多芯对称电缆 第7部分:具有1200MHz及以下传输特性的对绞或星绞对称电缆 数字及模拟通信电缆分规范 |
China National Standards Section |
English PDF |
GB/T 18015.8-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1200MHz-Work area wiring Sectional specification 数字通信用对绞或星绞多芯对称电缆 第8部分:具有1200MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆分规范 |
China National Standards Section |
English PDF |
GB/T 35206-2017 |
Thin Section examination of shale and mudstone 页岩和泥岩岩石薄片鉴定 |
China National Standards Section |
English PDF |
GB/Z 35588-2017 |
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-Section conduits 用安装在圆形截面管道中的差压装置测量湿气体流量 |
China National Standards Section |
English PDF |
GB/T 14598.23-2017 |
Electrical relays—Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment—Section 3: Seismic tests 电气继电器 第21部分:量度继电器和保护装置的振动、冲击、碰撞和地震试验 第3篇:地震试验 |
China National Standards Section |
English PDF |
GB/T 706-2016 |
Hot rolled Section steel 热轧型钢 |
China National Standards Section |
English PDF |
GB/T 33241-2016 |
Zinc-aluminum alloy coated Section steel 锌铝合金镀层型钢 |
China National Standards Section |
English PDF |
GB/T 25020.4-2016 |
Steel pole for overhead contact system of electrified railways—Part 4: H Section pole 电气化铁路接触网钢支柱 第4部分:H形支柱 |
China National Standards Section |
English PDF |
GB/T 10326-2016 |
Shaped refractory products inspections of dimension, appearance and Section 定形耐火制品尺寸、外观及断面的检查方法 |
China National Standards Section |
English PDF |
GB/T 33162-2016 |
Continuously hot-rolled steel sheet and strip for cold-forming steel Sections 冷弯型钢用热连轧钢板及钢带 |
China National Standards Section |
English PDF |
GB/T 32977-2016 |
Hot rolled improved corrosion resisting steel Sections 改善耐蚀性能热轧型钢 |
China National Standards Section |
English PDF |
GB/T 32600.2-2016 |
Textile machinery and accessories—Main dimensions for Section wires for metallic card clothing—Part 2: Foot with interchaining 纺织机械与附件 梳理机用金属针布齿条截面主要尺寸 第2部分:自锁基部 |
China National Standards Section |
English PDF |
GB/T 32600.1-2016 |
Textile machinery and accessories—Main dimensions for Section wires for metallic card clothing—Part 1: Foot without interlocking or interchainning 纺织机械与附件 梳理机用金属针布齿条截面主要尺寸 第1部分:普通基部 |
China National Standards Section |
English PDF |
GB/T 12357.4-2016 |
Multimode optical fibres for telcommunication—Part 4: Sectional specification for category A4 multimode fibres 通信用多模光纤 第4部分:A4类多模光纤特性 |
China National Standards Section |
English PDF |
GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross Section 农业车辆 被牵引车辆的机械连接装置 第1部分:50mm/30mm横截面的挂接环尺寸 |
China National Standards Section |
English PDF |
GB/T 11313.29-2015 |
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in (rack and panel applications)mechanism with characteristic impedance 50Ω 射频连接器 第29部分:50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器(1.0/2.3型)分规范 |
China National Standards Section |
English PDF |
GB/T 12357.1-2015 |
Multimode optical fibres for telecommunication—Part 1: Sectional specification for category A1 multimode fibres 通信用多模光纤 第1部分:A1类多模光纤特性 |
China National Standards Section |
English PDF |
GB/T 9546.8-2015 |
Fixed resistors for use in electronic equipment—Part 8: Sectional specification—Fixed surface mount resistors 电子设备用固定电阻器 第8部分:分规范 表面安装固定电阻器 |
China National Standards Section |
English PDF |
GB/T 6346.3-2015 |
Fixed capacitors for use in electronic equipment—Part 3: Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte 电子设备用固定电容器 第3部分:分规范 表面安装MnO2固体电解质钽固定电容器 |
China National Standards Section |
English PDF |
GB/T 6346.14-2015 |
Fixed capacitors for use in electronic equipment—Part 14: Sectional specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains 电子设备用固定电容器 第14部分:分规范 抑制电源电磁干扰用固定电容器 |
China National Standards Section |
English PDF |
GB/T 6346.11-2015 |
Fixed capacitors for use in electronic equipment—Part 11: Sectional specification—―Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第11部分:分规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 11313.8-2015 |
Radio-frequency connectors—Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock—Characteristic impedance 50Ω(75Ω)(type BNC) 射频连接器 第8部分:外导体内径为6.5mm(0.256in)、特性阻抗为50Ω(75Ω)、卡口连接的射频同轴连接器(BNC型)分规范 |
China National Standards Section |
English PDF |
GB/T 11313.37-2015 |
Radio-frequency connectors—Part 37: Sectional specification for STWX8 series R.F. coaxial connectors 射频连接器 第37部分:STWX8系列射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.16-2015 |
Radio-frequency connectors—Part 16:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N) 射频连接器 第16部分:外导体内径为7mm(0.276in)、特性阻抗为50Ω(75Ω)、螺纹连接的射频同轴连接器(N型)分规范 |
China National Standards Section |
English PDF |
GB/T 11313.101-2015 |
Radio-frequency connectors—Part 101:Sectional specification for MMCX series RF coaxial connectors 射频连接器 第101部分:MMCX系列射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB 50410-2014 |
Code for design of Section steel hot rolling Mills 型钢轧钢工程设计规范 |
China National Standards Section |
English PDF |
GB/T 31218-2014 |
Metallic materials—Determination of residual stress—Sectioning relaxation strain-gage method 金属材料 残余应力测定 全释放应变法 |
China National Standards Section |
English PDF |
GB/T 15448-2013 |
Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors 电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 14579-2013 |
Fixed capacitors for use in electronic equipment—Part 17:Sectional specification—Fixed metallized polypropylene film dielectric a.c. and pulse capacitors 电子设备用固定电容器 第17部分:分规范 金属化聚丙烯膜介质交流和脉冲固定电容器 |
China National Standards Section |
English PDF |
GB/T 10188-2013 |
Fixed capacitors for use in electronic equipment—Part 13:Sectional specification—Fixed polypropylene film dielectric metal foil d.c.capacitors 电子设备用固定电容器 第13部分:分规范 金属箔式聚丙烯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 4457.5-2013 |
Mechanical drawings―Basic conventions for representing areas on cuts and Sections 机械制图 剖面区域的表示法 |
China National Standards Section |
English PDF |
GB/T 17738.4-2013 |
Radio frequency and coaxial cable assemblies-Part 4: Sectional specification for semi-rigid coaxial cable assemblies 射频同轴电缆组件 第4部分:半硬同轴电缆组件分规范 |
China National Standards Section |
English PDF |
GB/T 17738.3-2013 |
Radio frequency and coaxial cable assemblies―Part 3:Sectional specification for semi-flexible coaxial cable assemiblies 射频同轴电缆组件 第3部分:半柔同轴电缆组件分规范 |
China National Standards Section |
English PDF |
GB/T 17738.2-2013 |
Radio frequency and coaxial cable assemblies―Part 2: Sectional specification for flexible coaxial cable assemblies 射频同轴电缆组件 第2部分:柔软同轴电缆组件分规范 |
China National Standards Section |
English PDF |
GB/T 17737.5-2013 |
Coaxial communication cables-Part 5:Sectional specification for CATV trunk and distribution cables 同轴通信电缆 第5部分:CATV用干线和配线电缆分规范 |
China National Standards Section |
English PDF |
GB/T 17737.4-2013 |
Coaxial communication cables—Part 4: Sectional specification for leaky cables 同轴通信电缆 第4部分:漏泄电缆分规范 |
China National Standards Section |
English PDF |
GB/T 11322.1-2013 |
Radio frequency cables―Part 0: Guide to the design of detail specifications―Section 1―Coaxial cables 射频电缆 第0部分:详细规范设计指南 第1篇 同轴电缆 |
China National Standards Section |
English PDF |
GB/T 11313.9-2013 |
Radio-frequency connectors―Part 9: Sectional specification for SMC series R.F. coaxial connectors 射频连接器 第9部分:SMC系列射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器(F型)分规范 |
China National Standards Section |
English PDF |
GB/T 11313.19-2013 |
Radio-frequency connectors―Part 19: Sectional specification-radio frequency coaxial connectors of type SSMB 射频连接器 第19部分:SSMB型射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 11313.18-2013 |
Radio-frequency connectors—Part 18:Sectional specification-Radio frequency coaxial connectors of type SSMA 射频连接器 第18部分:SSMA系列射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 29762-2013 |
Carbon fibre - Determination of filament diameter and cross-Section area 碳纤维 纤维直径和横截面积的测定 |
China National Standards Section |
English PDF |
GB/T 12796.2-2012 |
Permanent ferrite magnets - Part 2: Sectional specification for permanent ferrite magnets for use in micromotors 永磁铁氧体磁体 第2部分:微电机用永磁铁氧体磁体分规范 |
China National Standards Section |
English PDF |
GB/T 11313.10-2012 |
Radio-frequency connectors - Part 10:Sectional specification - SMB series R.F. coaxial connectors 射频连接器 第10部分:SMB系列射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 14860.4-2012 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure 电子和通信设备用变压器和电感器 第4部分:按能力批准程序评定质量的开关电源变压器分规范 |
China National Standards Section |
English PDF |
GB/T 14860.3-2012 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 3:Sectional specification for power transformers on the basis of the capability approval procedure 电子和通信设备用变压器和电感器 第3部分:按能力批准程序评定质量的电源变压器分规范 |
China National Standards Section |
English PDF |
GB/T 16608.50-2012 |
Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality 有或无机电继电器 第50部分:分规范 电信用有质量评定的有或无机电继电器 |
China National Standards Section |
English PDF |
GB/T 12859.2-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components (IECQ) - Part 2: Sectional specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分:分规范- 鉴定批准 |
China National Standards Section |
English PDF |
GB/T 10190-2012 |
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification:Fixed metallized polypropylene film dielectric d.c.capacitors 电子设备用固定电容器 第16部分: 分规范 金属化聚丙烯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 10185-2012 |
Fixed capacitors for use in electric equipment - Part 7: Sectional specification Fixed polystyrene film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第7部分:分规范 金属箔式聚苯乙烯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 28414-2012 |
Structural Section steels with improved seismie resistance 抗震结构用型钢 |
China National Standards Section |
English PDF |
GB/T 28617-2012 |
General guidance for green manufacturing technology - Foundry Section 绿色制造通用技术导则 铸造 |
China National Standards Section |
English PDF |
GB/T 7424.5-2012 |
Optical fibre cables - Part 5: Sectional specification - Micro-duct optical fibre cables and fibre units for installation by blowing 光缆 第5部分:分规范 用于气吹安装的微型光缆和光纤单元 |
China National Standards Section |
English PDF |
GB/T 7332-2011 |
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors 电子设备用固定电容器 第2部分:分规范 金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Section |
English PDF |
GB/T 5968-2011 |
Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric,Class 2 电子设备用固定电容器 第9部分:分规范 2类瓷介固定电容器 |
China National Standards Section |
English PDF |
GB/T 5966-2011 |
Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric,Class 1 电子设备用固定电容器 第8部分:分规范 1类瓷介固定电容器 |
China National Standards Section |
English PDF |
GB/T 25922-2010 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-Section conduits running full 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量的方法 |
China National Standards Section |
English PDF |
GB/T 26027-2010 |
Aluminium and aluminium alloys drawn seamless tubes for large circumscribed circle diameter of cross Section 铝及铝合金大规格拉制无缝管 |
China National Standards Section |
English PDF |
GB 50647-2011 |
Code for planning of interSections on urban roads 城市道路交叉口规划规范 |
China National Standards Section |
English PDF |
GB/T 11263-2010 |
Hot-rolled H and cut T Section steel 热轧H型钢和剖分T型钢 |
China National Standards Section |
English PDF |
GB/T 17971.6-2010 |
Information technology - Keyboard layouts for text and office systems - Part 6: Function Section 信息技术 文本和办公系统的键盘布局 第6部分:功能区 |
China National Standards Section |
English PDF |
GB/T 17971.5-2010 |
Information technology - Keyboard layouts for text and office systems - Part 5: Editing Section 信息技术 文本和办公系统的键盘布局 第5部分:编辑区 |
China National Standards Section |
English PDF |
GB/T 17971.4-2010 |
Information technology - Keyboard layouts for text and office systems - Part 4: Numeric Section 信息技术 文本和办公系统的键盘布局 第4部分:数字区 |
China National Standards Section |
English PDF |
GB/T 17971.3-2010 |
Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric Section 信息技术 文本和办公系统的键盘布局 第3部分:字母数字区的字母数字分区的补充布局 |
China National Standards Section |
English PDF |
GB/T 17971.2-2010 |
Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric Section 信息技术 文本和办公系统的键盘布局 第2部分:字母数字区 |
China National Standards Section |
English PDF |
GB/T 25020.4-2010 |
Steel pole for overhead contact system of electrified railway - Part 4:H Section pole 电气化铁路接触网钢支柱 第4部分:H形支柱 |
China National Standards Section |
English PDF |
GB/T 1209.3-2009 |
Agricultural machinery - Cutter bars - Part 3:Knife Sections, ledger plates and knife backs 农业机械 切割器 第3部分:动刀片、定刀片和刀杆 |
China National Standards Section |
English PDF |
GB/T 4061-2009 |
Polycrystalline silicon-examination method-assessment of sandwiches on cross-Section by chemical corrosion 硅多晶断面夹层化学腐蚀检验方法 |
China National Standards Section |
English PDF |
GB/T 14395-2009 |
Coding rules for urban geographical features - City roads, road interSections, blocks and municipal pipe lines 城市地理要素编码规则 城市道路、道路交叉口、街坊、市政工程管线 |
China National Standards Section |
English PDF |
GB/T 23662-2009 |
Rubber seals for use between concrete motorway paving Sections 混凝土道路伸缩缝用橡胶密封件 |
China National Standards Section |
English PDF |
GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分:分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Section |
English PDF |
GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分:分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Section |
English PDF |
GB/T 19290.3-2008 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r 发展中的电子设备构体机械结构模数序列 第2-1部分:分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸 |
China National Standards Section |
English PDF |
GB 14048.9-2008 |
Low-voltage switchgear and controlgear - Section 6-2: Multiple function equipment control and protective switching devices (or equipment) (CPS) 低压开关设备和控制设备 第6-2部分:多功能电器(设备)控制与保护开关电器(设备)(CPS) |
China National Standards Section |
English PDF |
GB/T 22296-2008 |
Textile machinery - High precision Sectional warping machine 纺织机械 高精度分段整经机 |
China National Standards Section |
English PDF |
GB/T 706-2008 |
Hot rolled Section steel 热轧型钢 |
China National Standards Section |
English PDF |
GB/T 6725-2008 |
Cold forming steel Sections 冷弯型钢 |
China National Standards Section |
English PDF |
GB/T 6726-2008 |
Cold forming Sectional steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards Section |
English PDF |
GB/T 6723-2008 |
Cold forming Sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards Section |
English PDF |
GB/T 4656-2008 |
Technical drawings - Simplified representation of bars and profile Sections 技术制图 棒料、型材及其断面的简化表示法 |
China National Standards Section |
English PDF |
GB/T 16483-2008 |
Safety data sheet for chemical products content and order of Sections 化学品安全技术说明书 内容和项目顺序 |
China National Standards Section |
English PDF |
GB/T 18910.3-2008 |
Liquid crystal and solid-state display devices - Part 3: Sectional specification for liquid crystal display (LCD) cells 液晶和固态显示器件 第3部分: 液晶显示屏分规范 |
China National Standards Section |
English PDF |
GB/T 2101-2008 |
General requirement of acceptance, packaging, marking, and certification for Section steel 型钢验收、包装、标志及质量证明书的一般规定 |
China National Standards Section |
English PDF |
GB/T 4798.2-2008 |
Environmental conditions existing in the application of electric and electronic products - Section 2:Transportation 电工电子产品应用环境条件 第2部分: 运输 |
China National Standards Section |
English PDF |
GB/T 10416-2007 |
Agricultural machinery - Endless variable - speed V-belts and groove Sections of corresponding pulleys 农业机械 环形变速V带及带轮轮槽截面 |
China National Standards Section |
English PDF |
GB/T 10415-2007 |
Agricultural machinery - Endless hexagonal belts and groove Sections of corresponding pulleys 农业机械 环形六角带及带轮轮槽截面 |
China National Standards Section |
English PDF |
GB/T 4798.7-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 7: Portable and non-stationary use 电工电子产品应用环境条件 第7部分:携带和非固定使用 |
China National Standards Section |
English PDF |
GB/T 4798.5-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 5: Ground vehicle installations 电工电子产品应用环境条件 第5部分:地面车辆使用 |
China National Standards Section |
English PDF |
GB/T 4798.4-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 4: Stationary use at non-weather-protected locations 电工电子产品应用环境条件 第4部分:无气候防护场所固定使用 |
China National Standards Section |
English PDF |
GB/T 4798.3-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 3: Stationary use at weather-protected locations 电工电子产品应用环境条件 第3部分:有气候防护场所固定使用 |
China National Standards Section |
English PDF |
GB/T 21042-2007 |
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification:Fixed surface mount multilayer capacitors of ceramic dielectric,class 2 电子设备用固定电容器 第22部分: 分规范 表面安装用2类多层瓷介固定电容器 |
China National Standards Section |
English PDF |
GB/T 21041-2007 |
Fixed capacitors for use in eiectronic equipment - Part 21: Sectional specification: Fixed sutface mount multilayer capacitors of ceramic dielectric,class 1 电子设备用固定电容器 第21部分: 分规范 表面安装用1类多层瓷介固定电容器 |
China National Standards Section |
English PDF |
GB/T 11313.2-2007 |
Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器 第2部分: 9.52型射频同轴连接器分规范 |
China National Standards Section |
English PDF |
GB/T 18015.6-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600MHz - Work area wiring - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第6部分:具有600MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.5-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600MHz - Horizontal floor wiring - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第5部分:具有600MHz及以下传输特性的对绞或星绞对称电缆 水平层布线电缆 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.42-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 42:Riser cables - Capability approval-Sectional specification 数字通信用对绞或星绞多芯对称电缆 第42部分:垂直布线电缆 能力认可 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.4-2007 |
Multicore and symmetrical pair/quad cables for digital communications- Part 4:Riser cables - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第4部分:垂直布线电缆 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.32-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 32: Work area wiring - Capability Approval - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第32部分:工作区布线电缆 能力认可 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.3-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 3:Work area wiring - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第3部分:工作区布线电缆 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.22-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 22: Horizontal floor wiring - Capability Approval - Sectional specification 数字通信用对绞或星绞多芯对称电缆 第22部分:水平层布线电缆 能力认可 分规范 |
China National Standards Section |
English PDF |
GB/T 18015.2-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 2:Horizontal floor wiring - Section specification 数字通信用对绞或星绞多芯对称电缆 第2部分:水平层布线电缆 分规范 |
China National Standards Section |
English PDF |
GB/T 2624.4-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-Section conduits running full - Part 4: Venturi tubes 用安装在圆形截面管道中的差压装置测量满管流体流量 第4部分:文丘里管 |
China National Standards Section |
English PDF |
GB/T 2624.3-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-Section conduits running full - Part 3: Nozzles and Venturi nozzles 用安装在圆形截面管道中的差压装置测量满管流体流量 第3部分:喷嘴和文丘里喷嘴 |
China National Standards Section |
English PDF |
GB/T 2624.2-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-Section conduits running full - Part 2: Orifice plates 用安装在圆形截面管道中的差压装置测量满管流体流量 第2部分:孔板 |
China National Standards Section |
English PDF |
GB/T 2624.1-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-Section conduits running full - Part 1: General principles and requirements 用安装在圆形截面管道中的差压装置测量满管流体流量 第1部分:一般原理和要求 |
China National Standards Section |
English PDF |
GB/T 12750-2006 |
Semiconductor devices―Integrated circuits―Part 11: Sectional specification for semiconductor integrated circuits excluding hybrid circuits 半导体器件 集成电路 第11部分:半导体集成电路分规范(不包括混合电路) |
China National Standards Section |
English PDF |
GB/T 20327-2006 |
Shanks for turning and planing tools - Shapes and dimensions of the Section 车刀和刨刀刀杆 截面形状和尺寸 |
China National Standards Section |
English PDF |
GB/T 20086-2006 |
Equipment for working the soil - Roller Sections - Coupling and section width 土壤耕作机械 镇压器 联接方式和工作幅宽 |
China National Standards Section |
English PDF |
GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards Section |
English PDF |
GB/T 16514.2-2005 |
Electromechanical switches for use in electronic equipment Part 5:Sectional specification for pushbutton switches Section 1-Blank detail specification 电子设备用机电开关 第5-1部分:按钮开关 空白详细规范 |
China National Standards Section |
English PDF |
GB/T 3452.1-2005 |
Fluid power systems-O-rings-Part 1:Inside diameters,cross-Sections,tolerances and size identification code 液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差 |
China National Standards Section |
English PDF |
GB/T 17453-2005 |
Technical drawings-General principles of presentation-Part 50:Basic conventions for representing areas on cuts and Sections 技术制图 图样画法 剖面区域的表示法 |
China National Standards Section |
English PDF |
GB/T 13151-2005 |
Semiconductor devices Discrete devices Part 6:Thyristors Section Three-Blank detail specification for reverse blocking triode thyristors,ambient and case-rated,for currents greater than 100A 半导体器件 分立器件 第6部分:晶闸管 第3篇 电流大于 100A、环境和管壳额定的反向阻断三极晶闸管空白详细规范 |
China National Standards Section |
English PDF |
GB/T 4798.1-2005 |
Environmental conditions existing in the application of electric and electronic products Section 1:Storage 电工电子产品应用环境条件 第一部分 贮存 |
China National Standards Section |
English PDF |
GB/Z 14429-2005 |
Telecontrol equipmet and systems Part1:General considerations Section3:Glossary 远动设备及系统 第1-3部分:总则 术语 |
China National Standards Section |
English PDF |
GB/T 18496.2-2005 |
Electromechanical switches for use in electronic equipment Part 4-1:Sectional specification for lever(toggle)switches Blank detail specification 电子设备用机电开关 第4-1部分:钮子(倒扳)开关 空白详细规范 |
China National Standards Section |
English PDF |
GB 16895.22-2004 |
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation,switching and control--Section 534:Devices for protection against overvoltages 建筑物电气装置 第5-53部分:电气设备的选择和安装-隔离、开关和控制设备 第534节:过电压保护电器 |
China National Standards Section |
English PDF |
GB/T 12357.4-2004 |
Multimode optical fibres fortelecommunication--Part 4:Sectional specification for category A4 multimode fibres 通信用多模光纤 第4部分:A4类多模光纤特性 |
China National Standards Section |
English PDF |
GB/T 12357.3-2004 |
Multimode optical fibres fortelecommunication--Part 3:Sectional specification for category A3 multimode fibres 通信用多模光纤 第3部分:A3类多模光纤特性 |
China National Standards Section |
English PDF |
GB/T 12357.2-2004 |
Multimode optical fibres fortelecommunication--Part 2:Sectional specification for category A2 multimode fibres 通信用多模光纤 第2部分:A2类多模光纤特性 |
China National Standards Section |
English PDF |
GB/T 7424.4-2003 |
Optical fiber cables--Part 4-1:Section specification--Optical fibre composite overhead ground wire 光缆 第4-1部分:分规范 光纤复合架空地线 |
China National Standards Section |
English PDF |
GB/T 7213-2003 |
Fixed capacitors for use in electronic equipment--Part 15:Sectional specification--Fixed tantalum capacitors with non-solid or solid electrolyte 电子设备用固定电容器 第15部分:分规范 非固体或固体电解质钽电容器 |
China National Standards Section |
English PDF |
GB/T 5993-2003 |
Fixed capacitors for use in electronic equipment--Part 4:Sectional specification--Aluminium electrolytic capacitors with solid and non-solid electrolyte 电子设备用固定电容器 第4部分:分规范 固体和非固体电解质铝电容器 |
China National Standards Section |
English PDF |
GB/T 19403.1-2003 |
Semiconductor devices--Integrated circuits--Part 11:Section 1:Internal visual examination for semiconductor integrated circuits(excluding hybrid circuits) 半导体器件 集成电路 第11部分:第1篇:半导体集成电路 内部目检 (不包括混合电路) |
China National Standards Section |
English PDF |
GB/T 19247.4-2003 |
Printed board assemblies--Part 4:Sectional specification--Requirements for terminal soldered assemblies 印制板组装 第4部分:分规范 引出端焊接组装的要求 |
China National Standards Section |
English PDF |
GB/T 19247.3-2003 |
Printed board assemblies--Part 3:Sectional specification--Requirements for through-hole mount soldered assemblies 印制板组装 第3部分:分规范 通孔安装焊接组装的要求 |
China National Standards Section |
English PDF |
GB/T 18910.2-2003 |
Liquid crystal and solid-state display devices--Part 2:Liquid crystal display modules Sectional specification 液晶和固态显示器件 第2部分:液晶显示模块分规范 |
China National Standards Section |
English PDF |
GB/T 18737.4-2003 |
Textile machinery and accessories--Beams for winding--Part 4:Quality classification of flanges for Weaver’s beams,warper’s beams and Sectional beams 纺织机械与附件 经轴 第4部分:织轴、整经轴和分段整经轴边盘的质量等级 |
China National Standards Section |
English PDF |
GB/T 19290.2-2003 |
Modular order for the development of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice 发展中的电子设备构体机械结构模数序列 第2部分: 分规范 25 mm设备构体的接口协调尺寸 |
China National Standards Section |
English PDF |
GB/T 5009.1-2003 |
Methods of food hygienic analysis--Physical and chemical Section--General principles 食品卫生检验方法 理化部分 总则 |
China National Standards Section |
English PDF |
GB/T 7424.3-2003 |
Optical fibre cables--Part 3: Section specification--Outdoor cables 光缆 第3部分: 分规范 室外光缆 |
China National Standards Section |
English PDF |
GB/T 19247.2-2003 |
Printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies 印制板组装 第2部分: 分规范 表面安装焊接组装的要求 |
China National Standards Section |
English PDF |
GB/T 19215.2-2003 |
Cable trunking and ducting systems for electrical installations--Part 2: Particular requirements--Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings 电气安装用电缆槽管系统 第2部分:特殊要求 第1节:用于安装在墙上或天花板上的电缆槽管系统 |
China National Standards Section |
English PDF |
GB/T 1563-2003 |
Taper keys--Cross Section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards Section |
English PDF |
GB 16915.4-2003 |
Switches for household and similar fixed-electrical installations--Part 2:Particular requirements--Section 3: Time-delay switches(TDS) 家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第3节: 延时开关 |
China National Standards Section |
English PDF |
GB 16895.20-2003 |
Electrical installations of buildings--Part 5: Selection and erection of electrical equipment--Chapter 55: Other equipment--Section 551: Low-voltage generating sets 建筑物电气装置 第5部分:电气设备的选择和安装 第55章:其他设备 第551节:低压发电设备 |
China National Standards Section |
English PDF |
GB/T 8461-2003 |
Textile machineryand accessories--Cone Sectional warping machines--Maximum usable width 纺织机械与附件 圆锥滚筒分条整经机 最大有效宽度 |
China National Standards Section |
English PDF |
GB/T 18909-2002 |
Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval 按能力批准评定质量的电子设备用高频电感器和中频变压器分规范 |
China National Standards Section |
English PDF |
GB/T 10715-2002 |
Belt drives--V-ribbed belts,joined V-belts and V-belts including wide Section belts and hexagonal belts--Electrical conductivity of antistatic belts:Characteristics and methods of test 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法 |
China National Standards Section |
English PDF |
GB/T 4458.6-2002 |
Mechanical drawings--General principles of presentation--Sections 机械制图 图样画法 剖视图和断面图 |
China National Standards Section |
English PDF |
GB/T 16895.17-2002 |
Eletrical installations of buildings--Part 5:Selection and erection of electrical equipment--Section 548:Earthing arrangements and equipotential bonding for information technology installations 建筑物电气装置 第5部分:电气设备的选择和安装 第548节:信息技术装置的接地配置和等电位联结 |
China National Standards Section |
English PDF |
GB 16895.19-2002 |
Electrical installations of buildings--Part 7:Requirements for special installations or locations--Section 702:Swimming pools and other basins 建筑物电气装置 第7部分:特殊装置或场所的要求 第702节:游泳池和其他水池 |
China National Standards Section |
English PDF |
GB/T 6728-2002 |
Cold formed steel hollow Sections for general structure--Dimensions,shapes,weight and permissible deviations 结构用冷弯空心型钢 尺寸、外形、重量及允许偏差 |
China National Standards Section |
English PDF |
GB/T 9097.1-2002 |
Sintered metal materials,excluding hardmetals--Determination of apparent hardness--Part 1:Materials of essentially uniform Section hardness 烧结金属材料(不包括硬质合金)表观硬度的测定 第一部分:截面硬度基本均匀的材料 |
China National Standards Section |
English PDF |
GB/T 18700.2-2002 |
Telecontrol equipment and systems--Part 6:Telecontrol protocols compatible with ISO standards and ITU-T recommendations--Section 802:Object model of TASE.2 远动设备和系统 第6部分:与ISO标准和ITU-T建议兼容的远动协议 第802篇:TASE.2对象模型 |
China National Standards Section |
English PDF |
Find out:323Items | To Page of: First -Previous-Next -Last | 1 2 |