China National Standards

China Steel products Method GB Standards List


  •  China "Steel products Method" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 43900-2024 Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components {译}
    钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 36915-2019 Steel wire and wire products—General test methods
    钢丝及钢丝制品 通用试验方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法
    China National Standards
    Steel products Method

    English PDF
    GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.11-2009 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法
    China National Standards
    Steel products Method

    English PDF
    GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法
    China National Standards
    Steel products Method

    English PDF
    GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法
    China National Standards
    Steel products Method

    English PDF
    GB/T 10121-2008 Steel products-Method for magnetic particle inspection of tower sample
    钢材塔形发纹磁粉检验方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
    钢产品镀锌层质量试验方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法
    China National Standards
    Steel products Method

    English PDF
    GB/T 8363-2007 Test method for drop - Weight tear tests of steel products
    铁素体钢落锤撕裂试验方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.7-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.6-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.5-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.8-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method)
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法)
    China National Standards
    Steel products Method

    English PDF
    GB/T 18570.10-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride
    涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
    China National Standards
    Steel products Method

    English PDF
    GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样
    China National Standards
    Steel products Method

    English PDF
    GB/T 18839.3-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning
    涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理
    China National Standards
    Steel products Method

    English PDF
    GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning
    涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理
    China National Standards
    Steel products Method

    English PDF
    GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
    涂覆涂料前钢材表面处理 表面处理方法 总则
    China National Standards
    Steel products Method

    English PDF
    GB/T 17849-1999 Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法
    China National Standards
    Steel products Method

    English PDF
    GB/T 15711-1995 Steel products--Method for etch test of towersample
    钢材塔形发纹酸浸检验方法
    China National Standards
    Steel products Method

    English PDF

    Find out:29Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards