Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43900-2024 |
Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components {译} 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards Steel steel products |
 English PDF |
| GB/T 17850.9-2021 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards Steel steel products |
English PDF |
| GB/T 36915-2019 |
Steel wire and wire products—General test methods 钢丝及钢丝制品 通用试验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 37055.1-2018 |
National articles numbering and basic information specification—Means of production—Part 1：Steel products for construction 国家物品编码与基础信息规范-生产资料-第1部分：建筑用钢材 |
China National Standards Steel steel products |
English PDF |
| GB/T 2975-2018 |
Steel and steel products—Location and preparation of samples and test pieces for mechanical testing 钢及钢产品 力学性能试验取样位置及试样制备 |
China National Standards Steel steel products |
English PDF |
| GB/T 36634-2018 |
Silver-coated copper-clad steel wire for electronic products 电子产品用镀银铜包钢线 |
China National Standards Steel steel products |
English PDF |
| GB/T 36102-2018 |
Tin-coated copper-clad steel wire for electronic products 电子产品用镀锡铜包钢线 |
China National Standards Steel steel products |
English PDF |
| GB/T 18253-2018 |
Steel and steel products—Types of inspection documents 钢及钢产品 检验文件的类型 |
China National Standards Steel steel products |
English PDF |
| GB/T 34560.1-2017 |
Structural steels—Part 1: General technical delivery condition for hot-rolled products 结构钢 第1部分：热轧产品一般交货技术条件 |
China National Standards Steel steel products |
English PDF |
| GB/T 23541-2017 |
Bonded abrasive products—Grinding wheel for steel balls 固结磨具 磨钢球砂轮 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.4-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分：煤炉渣 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.1-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类 |
China National Standards Steel steel products |
English PDF |
| GB/T 18838.2-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.5-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.7-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝 |
China National Standards Steel steel products |
English PDF |
| GB/T 17505-2016 |
Steel and steel products—General technical delivery requirements 钢及钢产品 交货一般技术要求 |
China National Standards Steel steel products |
English PDF |
| GB/T 15574-2016 |
Steel products classification 钢产品分类 |
China National Standards Steel steel products |
English PDF |
| GB/T 18838.5-2015 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸 |
China National Standards Steel steel products |
English PDF |
| GB/T 30052-2013 |
Life cycle assessment specification on steel products（Product category rules） 钢铁产品制造生命周期评价技术规范（产品种类规则） |
China National Standards Steel steel products |
English PDF |
| GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards Steel steel products |
English PDF |
| GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards Steel steel products |
English PDF |
| GB/T 8923.1-2011 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分：未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.6-2011 |
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.6-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 |
China National Standards Steel steel products |
English PDF |
| GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.11-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分：钢渣特种型砂 |
China National Standards Steel steel products |
English PDF |
| GB 9684-2011 |
National Food Safety Standard - Stainless Steel Products 食品安全国家标准 不锈钢制品 |
China National Standards Steel steel products |
English PDF |
| GB/T 23541-2009 |
Bonded abrasive products - Grinding wheel for steel balls 固结磨具 磨钢球砂轮 |
China National Standards Steel steel products |
English PDF |
| GB/T 8923.3-2009 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds,edges and other areas with surface imperfections 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第3部分：焊缝、边缘和其他区域的表面缺陷的处理等级 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.2-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分：清理过的表面上氯化物的实验室测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.11-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法 |
China National Standards Steel steel products |
English PDF |
| GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法 |
China National Standards Steel steel products |
English PDF |
| GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards Steel steel products |
English PDF |
| GB/T 10121-2008 |
Steel products-Method for magnetic particle inspection of tower sample 钢材塔形发纹磁粉检验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 1839-2008 |
Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products 钢产品镀锌层质量试验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 15575-2008 |
Steel products standard designation 钢产品标记代号 |
China National Standards Steel steel products |
English PDF |
| GB/T 8923.2-2008 |
Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel substrates after localized removal of previous coatings 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第2部分: 已涂覆过的钢材表面局部清除原有涂层后的处理等级 |
China National Standards Steel steel products |
English PDF |
| GB/T 18838.4-2008 |
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸 |
China National Standards Steel steel products |
English PDF |
| GB/T 18838.3-2008 |
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.12-2008 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法 |
China National Standards Steel steel products |
English PDF |
| GB/T 13288.1-2008 |
Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards Steel steel products |
English PDF |
| GB/T 8363-2007 |
Test method for drop - Weight tear tests of steel products 铁素体钢落锤撕裂试验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 222-2006 |
Permissible tolerances for chemical composition of steel products 钢的成品化学成分允许偏差 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards Steel steel products |
English PDF |
| GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards Steel steel products |
English PDF |
| GB/T 18839.3-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理 |
China National Standards Steel steel products |
English PDF |
| GB/T 18839.2-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理 |
China National Standards Steel steel products |
English PDF |
| GB/T 18839.1-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles 涂覆涂料前钢材表面处理 表面处理方法 总则 |
China National Standards Steel steel products |
English PDF |
| GB/T 18838.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类 |
China National Standards Steel steel products |
English PDF |
| GB/T 18570.4-2001 |
Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application 涂覆涂料前钢材表面处理 表面清洁度的评定试验 涂覆涂料前凝露可能性的评定导则 |
China National Standards Steel steel products |
English PDF |
| GB/T 18253-2000 |
Steel and steel products--Types of inspection documents 钢及钢产品 检验文件的类型 |
China National Standards Steel steel products |
English PDF |
| GB/T 17850.3-1999 |
Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 铜精炼渣 |
China National Standards Steel steel products |
English PDF |
| GB/T 17849-1999 |
Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 2975-1998 |
Steel and steel products--Location and preparation of test pieces for mechanical testing 钢及钢产品 力学性能试验取样位置及试样制备 |
China National Standards Steel steel products |
English PDF |
| GB/T 17505-1998 |
Steel and steel products--General technicaldelivery requirements 钢及钢产品交货一般技术要求 |
China National Standards Steel steel products |
English PDF |
| GB/T 15711-1995 |
Steel products--Method for etch test of towersample 钢材塔形发纹酸浸检验方法 |
China National Standards Steel steel products |
English PDF |
| GB/T 15574-1995 |
Steel products classification and definitions 钢产品分类 |
China National Standards Steel steel products |
English PDF |
| GB/T 14292-1993 |
Hot-rolled long products technical requirements for carbon structure steel and low-alloy structure steel 碳素结构钢和低合金结构钢热轧条钢技术条件 |
China National Standards Steel steel products |
English PDF |
| Find out:69Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
