Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44149-2024 |
Fine ceramics-Determination of isoelectric point of ceramic powders-zeta potential method {译} 精细陶瓷-陶瓷粉体等电点的测定-zeta电位法 |
China National Standards TH,fine |
 English PDF |
| GB/Z 43996.1-2024 |
Fine bubble technology-Agricultural application-Part 1: Test method for evaluating the growth promotion effect of hydroponic lettuce {译} 微细气泡技术-农业应用-第1部分：评价水培生菜生长促进作用的测试方法 |
China National Standards TH,fine |
English PDF |
| GB/T 43536.2-2023 |
Three-dimensional integrated circuits Part 2: Calibration requirements for fine-pitch stacked chips {译} 三维集成电路 第2部分：微间距叠层芯片的校准要求 |
China National Standards TH,fine |
English PDF |
| GB/T 43296-2023 |
Test method for room temperature bending fatigue properties of fine ceramics {译} 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards TH,fine |
English PDF |
| GB 1103.1-2023 |
Cotton Part 1: Sawtoothed Fine Staple Cotton {译} 棉花 第1部分：锯齿加工细绒棉 |
China National Standards TH,fine |
English PDF |
| GB/T 42667-2023 |
Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards TH,fine |
English PDF |
| GB/T 18034-2023 |
Specification for platinum-rhodium fine wire for rapid temperature measurement thermocouple {译} 快速测温热电偶用铂铑细偶丝规范 |
China National Standards TH,fine |
English PDF |
| GB/T 42524-2023 |
Bulk iron ore fines - Determination of transportable moisture limit - Compaction curve method {译} 散装铁矿粉 适运水分限量的测定 压实曲线法 |
China National Standards TH,fine |
English PDF |
| GB/T 13217.3-2022 |
Testing method of ink fineness {译} 油墨细度检验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 41914.1-2022 |
Fine bubble technology - General rules for the use and measurement of fine bubbles - Part 1: Terminology {译} 微细气泡技术 微细气泡使用和测量通则 第1部分：术语 |
China National Standards TH,fine |
English PDF |
| GB/T 40123-2021 |
Aluminium and aluminium alloy billet with high purity and fine grain 高纯净细晶铝及铝合金圆铸锭 |
China National Standards TH,fine |
English PDF |
| GB/T 40005-2021 |
Weibull statistics for strength data of fine ceramics 精细陶瓷强度数据的韦布尔统计分析方法 |
China National Standards TH,fine |
English PDF |
| GB/T 39826-2021 |
Fine ceramics—Determining flexural bond strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards TH,fine |
English PDF |
| GB/T 30026-2021 |
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH 起重用钢制短环链 手动链式葫芦用高精度链 TH级 |
China National Standards TH,fine |
English PDF |
| GB/T 10573-2020 |
Tensile testing method for fine wire of nonferrous metals 有色金属细丝拉伸试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 12729.4-2020 |
Spices and condiments—Determination of degree of fineness of grinding（hand sieving method） 香辛料和调味品 磨碎细度的测定（手筛法） |
China National Standards TH,fine |
English PDF |
| GB/T 70.6-2020 |
Hexagon socket head cap screws－Fine pitch thread 内六角圆柱头螺钉 细牙螺纹 |
China National Standards TH,fine |
English PDF |
| GB/T 39687-2020 |
Testing method for drying loss of fine ceramic powders 精细陶瓷粉体干燥损失测试方法 |
China National Standards TH,fine |
English PDF |
| GB/T 39682-2020 |
Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法 |
China National Standards TH,fine |
English PDF |
| GB/T 39226-2020 |
Requirements on the integrated test for high power converter system of magnetic confinement fusion 磁约束聚变大电流变流系统集成测试要求 |
China National Standards TH,fine |
English PDF |
| GB/T 32.3-2020 |
Hexagon bolts with wire holes on head—Fine pitch thread 六角头头部带孔螺栓 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 37829-2019 |
Iron ore fines in bulk—Determination of transportable moisture limits—Flow-table method 散装铁矿粉 适运水分限量的测定 流盘试验法 |
China National Standards TH,fine |
English PDF |
| GB/T 37679-2019 |
Sheet metal parts fabricated by fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards TH,fine |
English PDF |
| GB/T 37246-2018 |
Test method for thermal-shock resistance of fine ceramics 精细陶瓷抗热震性能试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 36991-2018 |
Coking refined anthracene 焦化精蒽 |
China National Standards TH,fine |
English PDF |
| GB/T 35099-2018 |
Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air 微束分析 扫描电镜-能谱法 大气细粒子单颗粒形貌与元素分析 |
China National Standards TH,fine |
English PDF |
| GB/T 33842.5-2018 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 5: Face image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第5部分：人脸图像数据 |
China National Standards TH,fine |
English PDF |
| GB/T 34783-2017 |
Determination of fineness of ramie fiber—Pneumatic method 苎麻纤维细度的测定 气流法 |
China National Standards TH,fine |
English PDF |
| GB/T 14048.13-2017 |
Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards TH,fine |
English PDF |
| GB/T 33842.2-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 2: Finger minutiae data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第2部分：指纹细节点数据 |
China National Standards TH,fine |
English PDF |
| GB/T 33842.4-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 4: Finger image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第4部分：指纹图像数据 |
China National Standards TH,fine |
English PDF |
| GB/T 35358.1-2017 |
Inlet air cleaning equipment for vehicle engines and compressors—Part 1: Fractional efficiency testing wiTH fine particles(0.3 μm to 5 μm optical diameter) 汽车发动机和压缩机进气空气滤清装置 第1部分：细颗粒分级效率测试(0.3μm到5μm) |
China National Standards TH,fine |
English PDF |
| GB/T 889.2-2016 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1—Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6187.2-2016 |
Prevailing torque type all-metal hexagon nuts with flange, style 2—Fine pitch thread 2型全金属六角法兰面锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6185.2-2016 |
Prevailing torque type all-metal hexagon nuts,style 2—Fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6183.2-2016 |
Prevailing torque type hexagon nuts with flange(with non-metallic insert), style 2—Fine pitch thread 2型非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6177.2-2016 |
Hexagon nuts with flange,style 2—Fine pitch thread 2型六角法兰面螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6176-2016 |
Hexagon nuts,style2—Fine pitch thread 2型六角螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6171-2016 |
Hexagon regular nuts（style1）with metric fine pitch thread 六角标准螺母（1型） 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 5786-2016 |
Hexagon head bolts—Fine pitch thread—Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards TH,fine |
English PDF |
| GB/T 5785-2016 |
Hexagon head bolts—Fine pitch thread 六角头螺栓 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 16674.2-2016 |
Hexagon bolts with flange—Fine pitch thread—Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards TH,fine |
English PDF |
| GB/T 6173-2015 |
Hexagon thin nuts—Fine pitch thread 六角薄螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 18147.4-2015 |
Test method for hemp fiber—Part 4: Test method for fineness of hemp fiber 大麻纤维试验方法 第4部分：细度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 31541-2015 |
Test method for interfacial bond strength of fine ceramic materials—Cross-bonded 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法 |
China National Standards TH,fine |
English PDF |
| GB/T 30707-2014 |
Testing method on adhesion of fine ceramic coatings―Scratching 精细陶瓷涂层结合力试验方法 划痕法 |
China National Standards TH,fine |
English PDF |
| GB/T 4757-2013 |
Methods for the batch flotation testing of fine coal 煤粉（泥）实验室单元浮选试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 30047-2013 |
Method for evaluating the flotability of fine coal 煤粉（泥）可浮性评定方法 |
China National Standards TH,fine |
English PDF |
| GB/T 30026-2013 |
Short link chains for lifting purposes - Grade TH,fine tolerance for manually operated chain hoists 起重用短环链 TH级手动链式葫芦用高精度链 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.6-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen helium oxygen nitrogen carbon dioxide and C1 to C8 hydrocarbons using three capillary columns 天然气 在一定不确定度下用气相色谱法测定组成 第6部分：用三根毛细管色谱柱测定氢、氦、氧、氮、二氧化碳和C1至C8的烃类 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.5-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分：实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.4-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen,carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns 天然气 在一定不确定度下用气相色谱法测定组成 第4部分：实验室和在线测量系统中用两根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards TH,fine |
English PDF |
| GB/T 28509-2012 |
Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies 绝缘外径在1mm以下的极细同轴电缆及组件 |
China National Standards TH,fine |
English PDF |
| GB/T 28272-2012 |
Metric screw threads with extra fine pitch - Series and basic dimensions 米制超细牙螺纹 系列和基本尺寸 |
China National Standards TH,fine |
English PDF |
| GB/T 28271-2012 |
Metric screw threads with extra fine pitch - Tolerances 米制超细牙螺纹 公差 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.3-2011 |
Natrual gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen,helium,oxyen,nitrogen,carbon dioxide and hydrocarbons up to C8 using two packed columns 天然气 在一定不确定度下用气相色谱法测定组成 第3部分：用两根填充柱测定氢、氦、氧、氮、二氧化碳和直至C8的烃类 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.2-2011 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data 天然气 在一定不确定度下用气相色谱法测定组成 第2部分：测量系统的特性和数理统计 |
China National Standards TH,fine |
English PDF |
| GB/T 27894.1-2011 |
Natural gas - Determination of composition with defined uncertainty by gas chromatogramphy - Part 1：Guidelines for tailored analysis 天然气 在一定不确定度下用气相色谱法测定组成 第1部分：分析导则 |
China National Standards TH,fine |
English PDF |
| GB/T 27596-2011 |
Dyestuffs - Determination of particle fineness - Microscope method 染料 颗粒细度的测定 显微镜法 |
China National Standards TH,fine |
English PDF |
| GB/T 25995-2010 |
Test methods for density and apparent porostiy of fine ceramics 精细陶瓷密度和显气孔率试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 3098.22-2009 |
Mechanical properties of fasteners made of the fine grain non-heat treatment steel - Bolts,screws and studs 紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱 |
China National Standards TH,fine |
English PDF |
| GB/T 24205-2009 |
Iron ores fines - Method for presentation the results of sintering test 铁矿粉 烧结试验结果表示方法 |
China National Standards TH,fine |
English PDF |
| GB/T 24199-2009 |
Refined pyridine - Determination of pyridine content - Gas chromatographic method 纯吡啶中吡啶含量的气相色谱测定方法 |
China National Standards TH,fine |
English PDF |
| GB/T 23806-2009 |
Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method 精细陶瓷断裂韧性试验方法 单边预裂纹梁(SEPB)法 |
China National Standards TH,fine |
English PDF |
| GB/T 23805-2009 |
Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature 精细陶瓷室温拉伸强度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 16534-2009 |
Fine ceramics（advanced ceramics,advanced technical ceramics）- Test method for hardness of monolithic ceramics at room temperature 精细陶瓷室温硬度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 13217.3-2008 |
Test method for fineness of grind of liquid ink 液体油墨细度检验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 16535-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique 精细陶瓷线热膨胀系数试验方法 顶杆法 |
China National Standards TH,fine |
English PDF |
| GB/T 14390-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature 精细陶瓷高温弯曲强度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 3520-2008 |
Test method for fineness of graphite 石墨细度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 12729.4-2008 |
Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method 香辛料和调味品 磨碎细度的测定(手筛法) |
China National Standards TH,fine |
English PDF |
| GB/T 17260-2008 |
Determination of fineness of flax - Permeametric method 亚麻纤维细度的测定 气流法 |
China National Standards TH,fine |
English PDF |
| GB/T 21867.2-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2:Assessment from the change in fineness of grind 颜料和体质颜料 分散性的评定方法 第2部分:由研磨细度的变化进行评定 |
China National Standards TH,fine |
English PDF |
| GB/T 17473.2-2008 |
Test methods of presious metals pastes used for microelectronics - Determination of fineness 微电子技术用贵金属浆料测试方法 细度测定 |
China National Standards TH,fine |
English PDF |
| GB/T 21059-2007 |
Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 |
China National Standards TH,fine |
English PDF |
| GB/T 2075-2007 |
Classification and application of hard cutting materials for metal removal with defined cutting edges ― Designation of the main groups and groups of application 切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号 |
China National Standards TH,fine |
English PDF |
| GB/T 14048.13-2006 |
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions(PDF) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件-在故障条件下具有确定功能的接近开关（PDF）的要求 |
China National Standards TH,fine |
English PDF |
| GB/T 8489-2006 |
Test method for compressive strength of fine ceramics (advanced ceramics, advanced technical ceramics) 精细陶瓷压缩强度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 6569-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature 精细陶瓷弯曲强度试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards TH,fine |
English PDF |
| GB/T 10700-2006 |
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards TH,fine |
English PDF |
| GB/T 19811-2005 |
Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 |
China National Standards TH,fine |
English PDF |
| GB/T 1345-2005 |
The test sieving method for fineness of cement 水泥细度检验方法 筛析法 |
China National Standards TH,fine |
English PDF |
| GB/T 16674.2-2004 |
Hexagon bolts with flange with metric fine pitch thread--Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards TH,fine |
English PDF |
| GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards TH,fine |
English PDF |
| GB/T 10664-2003 |
Pigment printing ink--Determination of printing shade，relative strength and granule fineness 涂料印花色浆 色光、着色力及颗粒细度的测定 |
China National Standards TH,fine |
English PDF |
| GB/T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert)，style 1，wiTH fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange wiTH fine pitch thread 全金属六角法兰面锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts，style 2，wiTH fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6183.2-2000 |
Prevailing torque type hexagon nutswith flange(with non-metallic insert) wiTH fine pitch thread 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6177.2-2000 |
Hexagon nuts with flange--Fine pitch thread 六角法兰面螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6176-2000 |
Hexagon nuts，style 2，wiTH fine pitch thread 2型六角螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 6171-2000 |
Hexagon nuts，style 1，wiTH fine pitch thread 1型六角螺母 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 5786-2000 |
Hexagon head bolts wiTH fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards TH,fine |
English PDF |
| GB/T 5785-2000 |
Hexagon head bolts wiTH fine pitch thread 六角头螺栓 细牙 |
China National Standards TH,fine |
English PDF |
| GB/T 3098.4-2000 |
Mechanical properties of fasteners--Nuts--Fine pitch thread 紧固件机械性能 螺母 细牙螺纹 |
China National Standards TH,fine |
English PDF |
| GB/T 17438-1998 |
Technical requirements for the transmission through contribution and primary distribution networks of digital television signals defined according to the 4∶2∶2 standard 由4∶2∶2标准定义的数字电视信号馈送和一次分配网络传输技术要求 |
China National Standards TH,fine |
English PDF |
| GB/T 16317-1996 |
Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 多层印制电路用限定燃烧性的薄覆铜箔聚酰亚胺玻璃布层压板 |
China National Standards TH,fine |
English PDF |
| GB/T 13220-1991 |
Determination of particle size distribution of fine powder--Method of sieve classfication with sonic wave 细粉末粒度分布的测定 声波筛分法 |
China National Standards TH,fine |
English PDF |
| GB/T 12629-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 限定燃烧性的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards TH,fine |
English PDF |
| GB/T 2362-1990 |
Basic rack tooth profile of fine-pitch involute cylindrical gears 小模数渐开线圆柱齿轮基本齿廓 |
China National Standards TH,fine |
English PDF |
| GB/T 10573-1989 |
Tensile testing method for fine wire of non-ferrous metals 有色金属细丝拉伸试验方法 |
China National Standards TH,fine |
English PDF |
| GB/T 10226-1988 |
Basic rack tooth profile of fine-pitch cylindrical worm 小模数圆柱蜗杆基本齿廓 |
China National Standards TH,fine |
English PDF |
| GB/T 10224-1988 |
Basic rack tooth profile of fine-pitch bevel gears 小模数锥齿轮基本齿廓 |
China National Standards TH,fine |
English PDF |
| GB/T 9459-1988 |
Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B 六角开槽薄螺母 细牙 A和B级 |
China National Standards TH,fine |
English PDF |
| GB/T 9458-1988 |
Hexagon slotted and castle nuts，style 2--Fine pitch thread--Product grades A and B 2 型六角开槽螺母 细牙 A和B级 |
China National Standards TH,fine |
English PDF |
| GB/T 9457-1988 |
Hexagon slotted and castle nuts，style l--Fine pitch thread--Product grades A and B 1 型六角开槽螺母 细牙 A和B级 |
China National Standards TH,fine |
English PDF |
| GB/T 808-1988 |
Small hexagon thin nuts--Fine pitch thread 小六角特扁细牙螺母 |
China National Standards TH,fine |
English PDF |
| GB/T 32.3-1988 |
Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B 六角头头部带孔螺栓 细牙 A和B级 |
China National Standards TH,fine |
English PDF |
| GB/T 31.3-1988 |
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B 六角头螺杆带孔螺栓 细牙 A和B级 |
China National Standards TH,fine |
English PDF |
| GB/T 4193-1984 |
Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 |
China National Standards TH,fine |
English PDF |
| GB/T 3501-1983 |
Technical requirements of super fine ruthenium dioxide hydrate powder 超细水合二氧化钌粉技术条件 |
China National Standards TH,fine |
English PDF |
| GB/T 1724-1979 |
Methods of test for fineness of grind of paints 涂料细度测定法 |
China National Standards TH,fine |
English PDF |
| Find out:113Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
