China Temperatures GB Standards List

China "Temperatures" GB Standards List:

Standard Code	Standard Title	Standard Class	Order
GB/T 44139.1-2024	Requirements for sleeping bags - Part 1: Thermal performance, quality and size requirements for sleeping bags designed for extreme low Temperatures above -20°C {译} 睡袋的要求-第1部分：设计用于极限低温-20℃以上睡袋的热性能、质量和尺寸要求	China National Standards Temperatures	English PDF
GB/Z 28820.4-2022	Long-term radiation aging of polymers - Part 4: Effect of different Temperatures and dose rates under radiation conditions {译} 聚合物长期辐射老化第4部分：辐射条件下不同温度和剂量率的影响	China National Standards Temperatures	English PDF
GB/T 41927-2022	Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated Temperatures {译} 塑料热固性模塑料高温下的短期性能评估	China National Standards Temperatures	English PDF
GB/T 40380.2-2021	Metallic powders—Determination of apparent density and flow rate at elevated Temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末高温时松装密度和流速的测定第2部分：高温时流速的测定	China National Standards Temperatures	English PDF
GB/T 40380.1-2021	Metallic powders—Determination of apparent density and flow rate at elevated Temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末高温时松装密度和流速的测定第1部分：高温时松装密度的测定	China National Standards Temperatures	English PDF
GB/T 31838.7-2021	Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated Temperatures 固体绝缘材料介电和电阻特性第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率	China National Standards Temperatures	English PDF
GB/T 13477.13-2019	Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable Temperatures 建筑密封材料试验方法第13部分：冷拉-热压后粘结性的测定	China National Standards Temperatures	English PDF
GB/T 34662-2017	Electrotechnical equipment—Temperatures of touchable hot surfaces 电气设备可接触热表面的温度指南	China National Standards Temperatures	English PDF
GB/T 3002-2017	Refractory products—Determination of modulus of rupture at elevated Temperatures 耐火材料高温抗折强度试验方法	China National Standards Temperatures	English PDF
GB/T 34186-2017	Refractory products—Determination of dynamic Young’s modulus(MOE)at elevated Temperatures by impulse excitation of vibration 耐火材料高温动态杨氏模量试验方法(脉冲激振法)	China National Standards Temperatures	English PDF
GB/T 5565.2-2017	Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient Temperatures 橡胶和塑料软管及非增强软管柔性及挺性的测量第2部分：低于室温弯曲试验	China National Standards Temperatures	English PDF
GB/T 5565.3-2017	Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low Temperatures 橡胶和塑料软管及非增强软管柔性及挺性的测量第3部分：高温和低温弯曲试验	China National Standards Temperatures	English PDF
GB/T 5565.1-2017	Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient Temperatures 橡胶和塑料软管及非增强软管柔性及挺性的测量第1部分：室温弯曲试验	China National Standards Temperatures	English PDF
GB/T 32970-2016	Longitudinal submerged-arc welded steel pipe for high pressure service at high Temperatures 高温高压管道用直缝埋弧焊接钢管	China National Standards Temperatures	English PDF
GB/T 32681-2016	Plastics—Phenolic resin —Determination of heats and Temperatures of reaction by differential scanning calorimetry 塑料酚醛树脂用差示扫描量热计法测定反应热和反应温度	China National Standards Temperatures	English PDF
GB/T 31544-2015	Test method for elastic properties of glass at high Temperatures—Impulse excitation of vibration 玻璃材料高温弹性性能试验方法脉冲激振法	China National Standards Temperatures	English PDF
GB/T 7759.1-2015	Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1: At ambient or elevated Temperatures 硫化橡胶或热塑性橡胶压缩永久变形的测定第1部分：在常温及高温条件下	China National Standards Temperatures	English PDF
GB/T 31405-2015	Standard test method for cathodic disbonding of pipeline coatings subjected to elevated Temperatures 管道耐蚀涂敷层高温阴极剥离试验方法	China National Standards Temperatures	English PDF
GB/T 7759.2-2014	Rubber,vulcanized or thermoplastic―Determination of compression set―Part 2:At low Temperatures 硫化橡胶或热塑性橡胶压缩永久变形的测定第2部分：在低温条件下	China National Standards Temperatures	English PDF
GB/T 31295-2014	The core to wind turbine blade―Determination of dimensional stability at elevated Temperatures with flexural load and with compressive load 风电叶片用芯材弯曲载荷和压缩载荷下高温尺寸稳定性的测定	China National Standards Temperatures	English PDF
GB/T 3103.4-2014	Tolerances for fasteners―Bolt/nut assemblies for service Temperatures from －200℃～＋700℃ 紧固件公差 -200℃～+700℃使用的螺栓-螺母连接副	China National Standards Temperatures	English PDF
GB/T 18851.6-2014	Non-destructive testing―Penetrant testing―Part 6: Penetrant testing at Temperatures lower than 10℃ 无损检测渗透检测第6部分：温度低于10℃的渗透检测	China National Standards Temperatures	English PDF
GB/T 18851.5-2014	Non-destructive testing―Penetrant testing―Part 5: Penetrant testing at Temperatures higher than 50 ℃ 无损检测渗透检测第5部分：温度高于50℃的渗透检测	China National Standards Temperatures	English PDF
GB/T 29037-2012	Thermal spraying - Coatings for protection against corrosion and oxidation at elevated Temperatures 热喷涂抗高温腐蚀和氧化的保护涂层	China National Standards Temperatures	English PDF
GB/T 27970-2011	Test method for weight loss of non-metallic gasket materials upon exposure to elevated Temperatures 非金属垫片材料烧失量试验方法	China National Standards Temperatures	English PDF
GB/T 3098.8-2010	Mechanical properties of fasteners - Parts for bolted connections for use at Temperatures from -200℃～+700℃ 紧固件机械性能 -200℃～+700℃使用的螺栓连接零件	China National Standards Temperatures	English PDF
GB 12476.8-2010	Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition Temperatures of dust 可燃性粉尘环境用电气设备第8部分：试验方法确定粉尘最低点燃温度的方法	China National Standards Temperatures	English PDF
GB/T 22697.3-2008	The risk assessment for the Temperatures of hot surfaces of electrical equipments to be touched - Part 3: The protective measures against burns 电气设备热表面灼伤风险评估第3部分：防护措施	China National Standards Temperatures	English PDF
GB/T 22697.2-2008	The risk assessment for the Temperatures of hot surfaces of electrical equipments to be touched - Part 2: Burn thresholds 电气设备热表面灼伤风险评估第2部分：灼伤阈值	China National Standards Temperatures	English PDF
GB/T 22697.1-2008	The risk assessment for the Temperatures of hot surfaces of electrical equipments to be touched - Part 1: General requirements 电气设备热表面灼伤风险评估第1部分：总则	China National Standards Temperatures	English PDF
GB/T 22579-2008	Guidance on the development of lists of maximum allowable Temperatures for polymeric compounds used in electotechnical equipment 拟定用于电工设备中聚合性复合物最大允许温度清单的导则	China National Standards Temperatures	English PDF
GB/T 22459.7-2008	Refractory mortars - Part 7: Determination of properties at elevated Temperatures 耐火泥浆第7部分：高温性能试验方法	China National Standards Temperatures	English PDF
GB/T 22307-2008	Standard test method for compressive strength of gaskets at elevated Temperatures 密封垫片高温抗压强度试验方法	China National Standards Temperatures	English PDF
GB/T 16991-2008	Textiles - Test for colour fastness - Colour fastness and ageing to artificial light at high Temperatures: Xenon arc 纺织品色牢度试验高温耐人造光色牢度及抗老化性能氙弧	China National Standards Temperatures	English PDF
GB/T 1685-2008	Rubber，vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated Temperatures 硫化橡胶或热塑性橡胶在常温和高温下压缩应力松弛的测定	China National Standards Temperatures	English PDF
GB/T 9278-2008	Temperatures and humidities for conditioning and testing of paint specimens 涂料试样状态调节和试验的温湿度	China National Standards Temperatures	English PDF
GB/T 20673-2006	Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient Temperatures 硬质泡沫塑料低于环境温度的线膨胀系数的测定	China National Standards Temperatures	English PDF
GB/T 10581-2006	Method of test for electrical resistance and resistivity of insulating materials at elevated Temperatures 绝缘材料在高温下电阻和电阻率的试验方法	China National Standards Temperatures	English PDF
GB/T 9979-2005	Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced Temperatures 纤维增强塑料高低温力学性能试验准则	China National Standards Temperatures	English PDF
GB/T 3002-2004	Refractory products--Determination of modulus of rupture at elevated Temperatures 耐火材料高温抗折强度试验方法	China National Standards Temperatures	English PDF
GB 7000.17-2003	Safety requirements for luminaries with limited surface Temperatures 限制表面温度灯具安全要求	China National Standards Temperatures	English PDF
GB/T 13477.13-2002	Test method for building sealants--Part 13:Determination of adhesion/cohesion properties at variable Temperatures 建筑密封材料试验方法第13部分:冷拉-热压后粘结性的测定	China National Standards Temperatures	English PDF
GB/T 2917.1-2002	Determination of compounds and products based on vingl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted Temperatures--Congo red method 以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其他酸性产物的测定刚果红法	China National Standards Temperatures	English PDF
GB/T 18153-2000	Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces 机械安全可接触表面温度确定热表面温度限值的工效学数据	China National Standards Temperatures	English PDF

Find out:44Items | To Page of: First -Previous-Next -Last | 1

- Since 2001 -
Focus on China Standards & Compliance Services

www.gbstandards.org
China National Standards