Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44168-2024 |
Requirements for the implementation of risk subjects for Test flights of large and medium-sized fixed-wing UAV systems for civil use {译} 民用大中型固定翼无人机系统试飞风险科目实施要求 |
China National Standards Test |
 English PDF |
| GB/T 44166-2024 |
Requirements for autonomous flight Test of large and medium-sized civil fixed-wing unmanned aerial vehicle systems {译} 民用大中型固定翼无人机系统自主能力飞行试验要求 |
China National Standards Test |
English PDF |
| GB/T 44156-2024 |
Performance requirements and Test methods for rear traffic crossing warning system of passenger vehicles {译} 乘用车后方交通穿行提示系统性能要求及试验方法 |
China National Standards Test |
English PDF |
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mechanical properties tests {译} 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards Test |
English PDF |
| GB/T 44152-2024 |
Ultrasonic Testing methods for seamless steel pipe ends {译} 无缝钢管管端超声检测方法 |
China National Standards Test |
English PDF |
| GB/T 44147-2024 |
Performance Test methods for liquid chromatography and atomic fluorescence spectrometry {译} 液相色谱与原子荧光光谱联用仪性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 36548-2024 |
Test procedures for access to the power grid for electrochemical energy storage power stations {译} 电化学储能电站接入电网测试规程 |
China National Standards Test |
English PDF |
| GB/T 22459.9-2024 |
Refractory mud - Part 9: Test method for shear bond strength at room temperature {译} 耐火泥浆-第9部分：常温抗剪粘接强度试验方法 |
China National Standards Test |
English PDF |
| GB/T 20290-2024 |
Household electric dishwashers - Performance Test methods {译} 家用电动洗碗机-性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 18029.8-2024 |
Wheelchairs - Part 8: Requirements and Test methods for static strength, impact strength and fatigue strength {译} 轮椅车-第8部分：静态强度、冲击强度及疲劳强度的要求和测试方法 |
China National Standards Test |
English PDF |
| GB/T 17692-2024 |
Test methods for net power of automobile engines and drive motors {译} 汽车发动机及驱动电机净功率测试方法 |
China National Standards Test |
English PDF |
| GB/T 7260.3-2024 |
Uninterruptible power supply systems (UPS) - Part 3: Methods for determining performance and Test requirements {译} 不间断电源系统（UPS）-第3部分：确定性能和试验要求的方法 |
China National Standards Test |
English PDF |
| GB/T 5270-2024 |
Metallic coatings on metal substrates - Electrodeposited and chemically deposited layers - Review of adhesion strength Test methods {译} 金属基体上的金属覆盖层-电沉积和化学沉积层-附着强度试验方法评述 |
China National Standards Test |
English PDF |
| GB/T 5169.23-2024 |
Fire hazard Tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame test method for polymer tubular materials {译} 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 |
China National Standards Test |
English PDF |
| GB/T 4585-2024 |
Artificial pollution Test for high voltage porcelain and glass insulators for AC systems {译} 交流系统用高压瓷和玻璃绝缘子的人工污秽试验 |
China National Standards Test |
English PDF |
| GB/T 44111-2024 |
Electrochemical energy storage power station maintenance Test procedures {译} 电化学储能电站检修试验规程 |
China National Standards Test |
English PDF |
| GB/Z 43996.1-2024 |
Fine bubble technology-Agricultural application-Part 1: Test method for evaluating the growth promotion effect of hydroponic lettuce {译} 微细气泡技术-农业应用-第1部分：评价水培生菜生长促进作用的测试方法 |
China National Standards Test |
English PDF |
| GB/T 19055-2024 |
Automobile engine reliability Test methods {译} 汽车发动机可靠性试验方法 |
China National Standards Test |
English PDF |
| GB/T 44037-2024 |
Test methods for coke dissolution rate and post-dissolution strength {译} 焦炭溶损率及溶损后强度试验方法 |
China National Standards Test |
English PDF |
| GB/T 44077.41-2024 |
Transparent display devices - Part 41: Test methods - Optical properties {译} 透明显示器件-第41部分：测试方法-光学性能 |
China National Standards Test |
English PDF |
| GB/T 43941.2-2024 |
Technical requirements and Test methods for high-speed modems in satellite-to-ground data transmission-Part 2: Demodulator {译} 星地数据传输中高速调制解调器技术要求和测试方法-第2部分:解调器 |
China National Standards Test |
English PDF |
| GB/T 44046-2024 |
Non-destructive Testing-Metal magnetic memory-Weld joint detection {译} 无损检测-金属磁记忆-焊接接头检测 |
China National Standards Test |
English PDF |
| GB/T 44051-2024 |
Non-destructive Testing of welds-Phase-controlled array ultrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards Test |
English PDF |
| GB/T 44053-2024 |
Hydraulic transmission-Test methods for water separation performance of oil purifiers {译} 液压传动-净油机水分离性能的试验方法 |
China National Standards Test |
English PDF |
| GB/T 44049-2024 |
Construction machinery-Test and calculation methods for basic data of operating energy consumption {译} 工程机械-运行能耗基础数据测试与计算方法 |
China National Standards Test |
English PDF |
| GB/T 44088-2024 |
Technical requirements and Test methods for the measurement module of the Beidou satellite navigation system {译} 北斗卫星导航系统测量型模块技术要求及测试方法 |
China National Standards Test |
English PDF |
| GB/T 44087-2024 |
Technical requirements and Test methods for BeiDou-3 regional short message communication user terminals {译} 北斗三号区域短报文通信用户终端技术要求与测试方法 |
China National Standards Test |
English PDF |
| GB/Z 44048-2024 |
Wind power generation system-numerical field calibration method for power performance Test of wind turbines {译} 风能发电系统-风力发电机组功率性能测试的数值场标定方法 |
China National Standards Test |
English PDF |
| GB/T 44117-2024 |
Model parameter Test procedures for electrochemical energy storage power station {译} 电化学储能电站模型参数测试规程 |
China National Standards Test |
English PDF |
| GB/T 33348-2024 |
Voltage source converter valves for high-voltage direct current transmission - Electrical Tests {译} 高压直流输电用电压源换流器阀-电气试验 |
China National Standards Test |
English PDF |
| GB/T 44039.2-2024 |
Road vehicles - Drawbar connectors and drawbar hooks - Part 2: Strength Test for special vehicles {译} 道路车辆-牵引杆连接器和牵引杆挂环-第2部分：特殊车辆强度试验 |
China National Standards Test |
English PDF |
| GB/T 44039.1-2024 |
Road vehicles - Drawbar connectors and drawbar hooks - Part 1: Strength Test for ordinary cargo center axle trailers {译} 道路车辆-牵引杆连接器和牵引杆挂环-第1部分：普通货物中置轴挂车强度试验 |
China National Standards Test |
English PDF |
| GB/T 18297-2024 |
Automobile engine performance Test methods {译} 汽车发动机性能试验方法 |
China National Standards Test |
English PDF |
| GB/Z 44116-2024 |
Durability Test methods for fuel cell engines and key components {译} 燃料电池发动机及关键部件耐久性试验方法 |
China National Standards Test |
English PDF |
| GB/T 7939.2-2024 |
Hydraulic transmission connection - Test method - Part 2: Quick-change connector {译} 液压传动连接-试验方法-第2部分：快换接头 |
China National Standards Test |
English PDF |
| GB/T 44067.1-2024 |
Industrial Internet platform - Technical requirements and Test methods - Part 1: General {译} 工业互联网平台-技术要求及测试方法-第1部分：总则 |
China National Standards Test |
English PDF |
| GB/T 44067.2-2024 |
Industrial Internet platform - Technical requirements and Test methods - Part 2: Industrial PaaS platform {译} 工业互联网平台-技术要求及测试方法-第2部分：工业PaaS平台 |
China National Standards Test |
English PDF |
| GB/T 44067.3-2024 |
Industrial Internet platform - Technical requirements and Test methods - Part 3: Industrial DaaS platform {译} 工业互联网平台-技术要求及测试方法-第3部分：工业DaaS平台 |
China National Standards Test |
English PDF |
| GB/T 44128-2024 |
Road vehicles - Braking start pressure of pneumatic brake systems of heavy commercial trains - Roller brake Test bench measurement method {译} 道路车辆-重型商用列车气压制动系统制动开始压力-滚筒制动试验台测量方法 |
China National Standards Test |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake Test bench test method for brake systems of vehicles with a maximum allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards Test |
English PDF |
| GB/T 44084-2024 |
Heavy commercial vehicle steering center area swing Test and transition test method {译} 重型商用车转向中心区摇摆试验和过渡试验方法 |
China National Standards Test |
English PDF |
| GB/T 44043-2024 |
Passenger cars - Free steering characteristics - Steering release open-loop Test method {译} 乘用车-自由转向特性-转向释放开环试验方法 |
China National Standards Test |
English PDF |
| GB/T 44030-2024 |
Metallic materials-High temperature compression Test methods {译} 金属材料-高温压缩试验方法 |
China National Standards Test |
English PDF |
| GB/T 44076-2024 |
Nanotechnology-Test methods for electrical properties of carbon nanotubes {译} 纳米技术-碳纳米管电学特性测试方法 |
China National Standards Test |
English PDF |
| GB/T 2039-2024 |
Metallic materials-Uniaxial tensile creep Test method {译} 金属材料-单轴拉伸蠕变试验方法 |
China National Standards Test |
English PDF |
| GB/T 44038-2024 |
Vehicle reversing warning sound requirements and Test methods {译} 车辆倒车提示音要求及试验方法 |
China National Standards Test |
English PDF |
| GB/T 18449.1-2024 |
Metallic materials-Knoop hardness Test-Part 1:-Test method {译} 金属材料-努氏硬度试验-第1部分:-试验方法 |
China National Standards Test |
English PDF |
| GB/T 4340.1-2024 |
Metallic materials-Vickers hardness Test-Part 1:-Test method {译} 金属材料-维氏硬度试验-第1部分:-试验方法 |
China National Standards Test |
English PDF |
| GB/T 44081-2024 |
Bypass diode thermal runaway Test for photovoltaic modules {译} 光伏组件用旁路二极管热失控测试 |
China National Standards Test |
English PDF |
| GB/T 44123-2024 |
Test methods for automobile hydraulic brake systems {译} 汽车液压制动系统试验方法 |
China National Standards Test |
English PDF |
| GB/T 18802.331-2024 |
Low voltage surge protector components - Part 331: Performance requirements and Test methods for metal oxide varistors (MOVs) {译} 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 |
China National Standards Test |
English PDF |
| GB/T 33475.4-2024 |
Information technology - High efficiency multimedia coding - Part 4: Conformity Testing {译} 信息技术-高效多媒体编码-第4部分：符合性测试 |
China National Standards Test |
English PDF |
| GB/Z 43996.2-2024 |
Microbubble technology - Agricultural applications - Part 2: Test method for evaluating the germination promotion effect on barley seeds {译} 微细气泡技术-农业应用-第2部分：评价大麦种子发芽促进作用的测试方法 |
China National Standards Test |
English PDF |
| GB/T 11420-2024 |
Enamel products and porcelain glazes - Gloss Test method {译} 搪瓷制品和瓷釉-光泽度测试方法 |
China National Standards Test |
English PDF |
| GB/T 12705.2-2024 |
Textiles - Test method for anti-drilling down - Part 2: Box transfer method {译} 纺织品-防钻绒性试验方法-第2部分：转箱法 |
China National Standards Test |
English PDF |
| GB/T 13929-2024 |
Water ring vacuum pumps and water ring compressors-Test methods {译} 水环真空泵和水环压缩机-试验方法 |
China National Standards Test |
English PDF |
| GB/T 14207-2024 |
Test method for water absorption of sandwich structures or cores {译} 夹层结构或芯子吸水性试验方法 |
China National Standards Test |
English PDF |
| GB/T 17737.119-2024 |
Coaxial communication cables - Part 1-119: Electrical Test methods - Radio frequency power of coaxial cables and cable assemblies {译} 同轴通信电缆-第1-119部分：电气试验方法-同轴电缆及电缆组件的射频功率 |
China National Standards Test |
English PDF |
| GB/T 18910.63-2024 |
Liquid crystal display devices - Part 6-3: Test methods for liquid crystal display modules - Active matrix liquid crystal display =Motion artifacts of display modules {译} 液晶显示器件-第6-3部分：液晶显示模块测试方法-有源矩阵液晶显示模块运动伪像 |
China National Standards Test |
English PDF |
| GB/T 19960-2024 |
Wind power generation system - General technical conditions and Test methods for wind turbines {译} 风能发电系统-风力发电机组通用技术条件和试验方法 |
China National Standards Test |
English PDF |
| GB/T 20183.1-2024 |
Plant protection machinery - Spraying equipment - Part 1: Test method for sprayer nozzles {译} 植物保护机械-喷雾设备-第1部分：喷雾机喷头试验方法 |
China National Standards Test |
English PDF |
| GB/T 20183.2-2024 |
Plant protection machinery - Spraying equipment - Part 2: Test method for evaluating the horizontal lateral distribution of hydraulic sprayers {译} 植物保护机械-喷雾设备-第2部分：评价液力喷雾机水平横向分布的试验方法 |
China National Standards Test |
English PDF |
| GB/T 20183.3-2024 |
Plant protection machinery - Spraying equipment - Part 3: Test method for evaluating the performance of the liquid dosage adjustment system per unit area {译} 植物保护机械-喷雾设备-第3部分：评价单位面积施药液量调节系统性能的试验方法 |
China National Standards Test |
English PDF |
| GB/T 20340.1-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 1: Design safety, Test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第1部分：设计安全、试验方法和验收条件 |
China National Standards Test |
English PDF |
| GB/T 20340.2-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 2: Application safety, Test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第2部分：应用安全、试验方法和验收条件 |
China National Standards Test |
English PDF |
| GB/T 20871.61-2024 |
Organic light-emitting diode display devices - Part 6-1: Test methods for optical and optoelectronic parameters {译} 有机发光二极管显示器件-第6-1部分：光学和光电参数测试方法 |
China National Standards Test |
English PDF |
| GB/T 25392-2024 |
Agricultural engineering - Electrical and electrical Sub-equipment - Environmental resistance Test {译} 农业工程-电气和电子设备-耐环境试验 |
China National Standards Test |
English PDF |
| GB/T 30177.2-2024 |
Filter performance Test method-Part 2 Part: Vacuum filter {译} 过滤机性能测试方法-第2部分：真空过滤机 |
China National Standards Test |
English PDF |
| GB/T 31211.1-2024 |
Non-destructive Testing-ultrasonic guided wave testing-Part 1: General rules {译} 无损检测-超声导波检测-第1部分：总则 |
China National Standards Test |
English PDF |
| GB/T 31211.2-2024 |
Non-destructive Testing-ultrasonic guided wave testing-Part 2: Magnetostriction method {译} 无损检测-超声导波检测-第2部分：磁致伸缩法 |
China National Standards Test |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: Ultrasonic Testing by time-of-flight diffraction {译} 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards Test |
English PDF |
| GB/T 38001.51-2024 |
Flexible display devices - Part 5-1: Optical performance Test method {译} 柔性显示器件-第5-1部分：光学性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 38001.52-2024 |
Flexible display devices - Part 5-2: Optical performance Test method for non-portable curved display devices {译} 柔性显示器件-第5-2部分：非便携式曲面显示器件光学性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 4074.1-2024 |
Test methods for winding wires - Part 1: General provisions {译} 绕组线试验方法-第1部分：一般规定 |
China National Standards Test |
English PDF |
| GB/T 4074.2-2024 |
Test methods for winding wires - Part 2: Dimensional measurements {译} 绕组线试验方法-第2部分：尺寸测量 |
China National Standards Test |
English PDF |
| GB/T 4074.3-2024 |
Test methods for winding wires - Part 3: Mechanical properties {译} 绕组线试验方法-第3部分：机械性能 |
China National Standards Test |
English PDF |
| GB/T 4074.4-2024 |
Test methods for winding wires - Part 4: Chemical properties {译} 绕组线试验方法-第4部分：化学性能 |
China National Standards Test |
English PDF |
| GB/T 4074.5-2024 |
Test methods for winding wires - Part 5: Electrical properties {译} 绕组线试验方法-第5部分：电性能 |
China National Standards Test |
English PDF |
| GB/T 4074.6-2024 |
Test methods for winding wires - Part 6: Thermal properties {译} 绕组线试验方法-第6部分：热性能 |
China National Standards Test |
English PDF |
| GB/T 4331-2024 |
Agricultural trailers-Test methods {译} 农用挂车-试验方法 |
China National Standards Test |
English PDF |
| GB/T 43590.504-2024 |
Laser display devices-Part 5-4: Optical Test methods for colored speckle {译} 激光显示器件-第5-4部分：彩色散斑的光学测试方法 |
China National Standards Test |
English PDF |
| GB/T 43741-2024 |
Network security technology-Requirements for network security crowd Testing services {译} 网络安全技术-网络安全众测服务要求 |
China National Standards Test |
English PDF |
| GB/T 43849-2024 |
Basic Environmental Test Methods for Underwater Robot Complete Machines and Components-Hydrostatic Pressure Test Method {译} 水下机器人整机及零部件基本环境试验方法-水静压力试验方法 |
China National Standards Test |
English PDF |
| GB/T 43853-2024 |
High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc Method {译} 激光修复层高温摩擦磨损性能试验-球-盘法 |
China National Standards Test |
English PDF |
| GB/T 43860.1210-2024 |
Touch and Interactive Display-Part 12-10: Touch Display Test Method-Touch and Electrical Performance {译} 触摸和交互显示-第12-10部分：触摸显示测试方法-触摸和电性能 |
China National Standards Test |
English PDF |
| GB/T 43860.1220-2024 |
Touch and Interactive Display-Part 12-20: Touch Display Test Method-Multi-touch Performance {译} 触摸和交互显示-第12-20-部分：触摸显示测试方法-多点触摸性能 |
China National Standards Test |
English PDF |
| GB/T 43872-2024 |
Test method for cement chloride ion curing rate {译} 水泥氯离子固化率检测方法 |
China National Standards Test |
English PDF |
| GB/T 43873-2024 |
Test method for upper and lower limit temperature of ultra-thin glass annealing {译} 超薄玻璃退火上下限温度试验方法 |
China National Standards Test |
English PDF |
| GB/T 43874-2024 |
Test method for compression performance of glass materials and products {译} 玻璃材料及制品压缩性能试验方法 |
China National Standards Test |
English PDF |
| GB/T 43881-2024 |
Test method for thermal expansion coefficient of low expansion glass line - laser interferometry {译} 低膨胀玻璃线热膨胀系数试验方法-激光干涉法 |
China National Standards Test |
English PDF |
| GB/T 43888-2024 |
Ultrasonic Testing method for rails {译} 钢轨超声检测方法 |
China National Standards Test |
English PDF |
| GB/T 43891-2024 |
Non-metallic chemical equipment - Test method for heat transfer coefficient and flow resistance performance of impermeable graphite heat exchangers {译} 非金属化工设备-不透性石墨换热器传热系数和流阻性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43892-2024 |
Spectral transmittance Test method for quartz glass {译} 石英玻璃光谱透射比试验方法 |
China National Standards Test |
English PDF |
| GB/T 43896-2024 |
Metallic materials - Ultra-high cycle fatigue - Ultrasonic fatigue Test methods {译} 金属材料-超高周疲劳-超声疲劳试验方法 |
China National Standards Test |
English PDF |
| GB/T 43900-2024 |
Nondestructive Testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components {译} 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards Test |
English PDF |
| GB/T 43911-2024 |
Evaluation methods for uncertainty in boiler thermal performance Tests {译} 锅炉热工性能试验不确定度的评定方法 |
China National Standards Test |
English PDF |
| GB/T 43915-2024 |
Test methods for nano-geometric standard samples {译} 纳米几何量标准样板测试方法 |
China National Standards Test |
English PDF |
| GB/T 43917.2-2024 |
Welding fume capture and separation equipment - Part 2: Test and marking requirements for separation efficiency {译} 焊接烟尘捕集和分离设备-第2部分：分离效率的测试和标记要求 |
China National Standards Test |
English PDF |
| GB/T 43921-2024 |
Non-destructive Testing-Ultrasonic testing-Full matrix acquisition/full focusing technology (FMC/TFM) {译} 无损检测-超声检测-全矩阵采集/全聚焦技术（FMC/TFM） |
China National Standards Test |
English PDF |
| GB/T 43925-2024 |
Full-size tensile stress corrosion Test method for casing and oil pipes {译} 套管和油管全尺寸拉伸应力腐蚀试验方法 |
China National Standards Test |
English PDF |
| GB/T 43929-2024 |
Testing guide for fiber optic devices for space use {译} 空间用纤维光学器件测试指南 |
China National Standards Test |
English PDF |
| GB/T 43938.1-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards Test |
English PDF |
| GB/T 43938.2-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards Test |
English PDF |
| GB/T 43939-2024 |
General Test method for quartz flexible accelerometer servo circuit for aerospace {译} 宇航用石英挠性加速度计伺服电路通用测试方法 |
China National Standards Test |
English PDF |
| GB/T 43940-2024 |
Test method for 4Mb/s digital time-division command/response multiplexed data bus {译} 4Mb/s数字式时分制指令/响应型多路传输数据总线测试方法 |
China National Standards Test |
English PDF |
| GB/T 43941.1-2024 |
Technical requirements and Test methods for high-speed modems in satellite-to-ground data transmission-Part 1: Modulator- {译} 星地数据传输中高速调制解调器技术要求和测试方法-第1部分:调制器- |
China National Standards Test |
English PDF |
| GB/T 43967-2024 |
Space environment - single particle effect pulse laser Test method for semiconductor devices for aerospace use {译} 空间环境-宇航用半导体器件单粒子效应脉冲激光试验方法 |
China National Standards Test |
English PDF |
| GB/T 43971-2024 |
Integrating sphere light source Test specifications for remote sensor calibration {译} 遥感器定标用积分球光源测试规范 |
China National Standards Test |
English PDF |
| GB/T 44000-2024 |
Space Environment - General Requirements for Ground Simulation Test Devices for Space Environment Effects on Materials {译} 空间环境-材料空间环境效应地面模拟试验装置通用要求 |
China National Standards Test |
English PDF |
| GB/T 44003-2024 |
Mechanical Property Measurement - Test Method for Delamination Strength of REBCO Coated Conductors (Copper Plating) {译} 力学性能测量-REBCO涂层导体（镀铜）脱层强度测试方法 |
China National Standards Test |
English PDF |
| GB/T 44004-2024 |
Nanotechnology - Test Methods for Characterization of Organic Transistors and Materials {译} 纳米技术-有机晶体管和材料表征试验方法 |
China National Standards Test |
English PDF |
| GB/T 44021.2-2024 |
Audio, video and related equipment - Power consumption measurement - Part 2: Test signals and media {译} 音视频及相关设备-功耗测量-第2部分：测试信号和媒介 |
China National Standards Test |
English PDF |
| GB/T 6498-2024 |
Test Method for Micronaire of Cotton Fiber {译} 棉纤维马克隆值试验方法 |
China National Standards Test |
English PDF |
| GB/T 13777-2024 |
Test Method for Maturity of Cotton Fiber-Microscopy {译} 棉纤维成熟度试验方法-显微镜法 |
China National Standards Test |
English PDF |
| GB/T 1464-2024 |
Test method for sandwich structure or core density {译} 夹层结构或芯子密度试验方法 |
China National Standards Test |
English PDF |
| GB/T 7939.1-2024 |
Hydraulic transmission connections - Test methods - Part 1: Pipe joints {译} 液压传动连接-试验方法-第1部分：管接头 |
China National Standards Test |
English PDF |
| GB/T 43658.2-2024 |
Non-destructive Testing - X-ray and gamma-ray testing of pipeline corrosion and deposits - Part 2: Double-wall radiography {译} 无损检测-管道腐蚀及沉积物X和伽马射线检测-第2部分：双壁射线检测 |
China National Standards Test |
English PDF |
| GB/T 43658.1-2024 |
Non-destructive Testing - X-ray and gamma-ray testing of pipeline corrosion and deposits - Part 1: Tangential radiography {译} 无损检测-管道腐蚀及沉积物X和伽马射线检测-第1部分：切向射线检测 |
China National Standards Test |
English PDF |
| GB/T 24926-2024 |
All-terrain vehicle braking performance requirements and Test methods {译} 全地形车制动性能要求及试验方法 |
China National Standards Test |
English PDF |
| GB/T 20042.6-2024 |
Proton exchange membrane fuel cells - Part 6 ：Test methods for bipolar plate characteristics {译} 质子交换膜燃料电池-第6部分：双极板特性测试方法 |
China National Standards Test |
English PDF |
| GB/T 19936.2-2024 |
Gears - FZG Test procedure - Part 2: Relative bonding load capacity of high extreme pressure oils FZG step loading test A10/16.6R/120 {译} 齿轮-FZG试验程序-第2部分：高极压油的相对胶合承载能力FZG阶梯加载试验A10/16.6R/120 |
China National Standards Test |
English PDF |
| GB/T 29899-2024 |
Test method for the release of volatile organic compounds in artificial boards and their products-Small release chamber method {译} 人造板及其制品中挥发性有机化合物释放量试验方法-小型释放舱法 |
China National Standards Test |
English PDF |
| GB/T 43657.3-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 3: Container handlers {译} 工业车辆能效-试验方法-第3部分：集装箱搬运车 |
China National Standards Test |
English PDF |
| GB/T 43657.2-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 2: Self-propelled vehicles, tractors and carriers controlled by operators {译} 工业车辆能效-试验方法-第2部分：操作者控制的自行式车辆、牵引车和载运车 |
China National Standards Test |
English PDF |
| GB/T 43657.1-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 1: General {译} 工业车辆能效-试验方法-第1部分：总则 |
China National Standards Test |
English PDF |
| GB/T 43740-2024 |
Performance requirements and Test methods of atomic gravimeter {译} 原子重力仪性能要求和测试方法 |
China National Standards Test |
English PDF |
| GB/T 6383-2024 |
Cavitation Test method {译} 空蚀试验方法 |
China National Standards Test |
English PDF |
| GB/T 43617.2-2024 |
Rolling bearings-Noise Test of rolling bearing grease-Part 2: Test and evaluation method BQ+ {译} 滚动轴承-滚动轴承润滑脂噪声测试-第2部分：测试和评估方法BQ+ |
China National Standards Test |
English PDF |
| GB/T 43617.1-2024 |
Rolling bearings-Noise Test of rolling bearing grease-Part 1: Basic principles, test components and testers {译} 滚动轴承-滚动轴承润滑脂噪声测试-第1部分：基本原则、测试组件和测试仪 |
China National Standards Test |
English PDF |
| GB/T 26954-2024 |
Non-destructive Testing of welds-Eddy current testing of welds based on complex plane analysis {译} 焊缝无损检测-基于复平面分析的焊缝涡流检测 |
China National Standards Test |
English PDF |
| GB/T 3246.1-2024 |
Test methods for the organization of deformed aluminum and aluminum alloy products - Part 1: Microstructure test methods {译} 变形铝及铝合金制品组织检验方法-第1部分：显微组织检验方法 |
China National Standards Test |
English PDF |
| GB/T 43736-2024 |
Method for Testing performance parameters of optical frequency combs in precision optical frequency measurement {译} 精密光频测量中光学频率梳性能参数测试方法 |
China National Standards Test |
English PDF |
| GB/T 43727-2024 |
Thyristor valves for thyristor controlled series capacitors (TCSC)-Electrical Test {译} 晶闸管控制串联电容器（TCSC）用晶闸管阀-电气试验 |
China National Standards Test |
English PDF |
| GB/T 232-2024 |
Metallic materials - Bend Test method {译} 金属材料-弯曲试验方法 |
China National Standards Test |
English PDF |
| GB/T 43774-2024 |
Flat panel display substrate glass stress Test - point scanning method {译} 平板显示器基板玻璃应力测试-点扫描法 |
China National Standards Test |
English PDF |
| GB/T 43811-2024 |
Test methods for short fiber content of fiber products for wadding {译} 絮用纤维制品短纤维含量测试方法 |
China National Standards Test |
English PDF |
| GB/T 43720-2024 |
Leather and fur-Chemical Tests-Determination of flame retardants {译} 皮革和毛皮-化学试验-阻燃剂的测定 |
China National Standards Test |
English PDF |
| GB/T 43819-2024 |
Leather-Chemical Tests-Determination of pesticide residues {译} 皮革-化学试验-杀虫剂残留量的测定 |
China National Standards Test |
English PDF |
| GB/T 43634-2024 |
Forensic science-DNA second generation sequencing Test specifications {译} 法医学-尸体检验职业防护指南 |
China National Standards Test |
English PDF |
| GB/T 43750-2024 |
Coaxial communication cable-Part 1-113:-Electrical Test methods-Attenuation constant test {译} 各向同性稀土粘结永磁粉磁特性测量方法 |
China National Standards Test |
English PDF |
| GB/T 43330.2-2024 |
Mobile lifting work platform-Design, calculation, safety requirements and Test methods {译} 船舶压载水处理系统-第2部分：电解法 |
China National Standards Test |
English PDF |
| GB/T 43793.2-2024 |
Test methods for color photoresist for flat panel displays-Part 3: Reliability {译} 平板显示用彩色光刻胶测试方法-第2部分：光学性能 |
China National Standards Test |
English PDF |
| GB/T 43836-2024 |
Test methods for color photoresist for flat panel displays-Part 2: Optical properties {译} 企业科技创新系统能力水平评价规范 |
China National Standards Test |
English PDF |
| GB/T 43758.1-2024 |
Test methods for color photoresist for flat panel displays-Part 1: Physical and chemical properties {译} 智能网联汽车运行安全测试环境技术条件-第1部分：公共道路 |
China National Standards Test |
English PDF |
| GB/T 43766-2024 |
Technical conditions for safety Test environment of intelligent networked vehicles-Part 1: Public roads {译} 智能网联汽车运行安全测试技术要求 |
China National Standards Test |
English PDF |
| GB/T 43689-2024 |
Technical requirements for safety Test of intelligent networked vehicles {译} 家用和类似用途制冷器具电脑程序控制器 |
China National Standards Test |
English PDF |
| GB/T 42791-2024 |
Corrosion of Metals and Alloys - Electrochemical Guidelines for noise measurement corrosion Test {译} 航空用铝合金锻件通用技术规范 |
China National Standards Test |
English PDF |
| GB/T 43716-2024 |
Textiles - Test method for anti-down drilling - Part 1: Friction method {译} 纺织品-夜光余辉性能试验方法-亮度计法 |
China National Standards Test |
English PDF |
| GB/T 43823-2024 |
Textiles - Test method for luminous afterglow performance - Luminance meter method {译} 纺织品-抗病毒活性的测定 |
China National Standards Test |
English PDF |
| GB/T 21295-2024 |
Testing methods for clothing physical and chemical properties {译} 服装理化性能的技术要求 |
China National Standards Test |
English PDF |
| GB/T 43742-2024 |
Methods for Testing the mechanical strength of magnetic cores made of magnetic oxides {译} 工业园区水回用指南 |
China National Standards Test |
English PDF |
| GB/T 13217.2-2024 |
Explosive atmospheres-Resistive heating devices-Part 1: General and Test requirements {译} 油墨光泽检验方法 |
China National Standards Test |
English PDF |
| GB/T 19964-2024 |
Ink gloss Test method {译} 光伏发电站接入电力系统技术规定 |
China National Standards Test |
English PDF |
| GB/T 43725-2024 |
Test methods for positive photoresist materials for flat panel display arrays {译} 直写成像式曝光设备 |
China National Standards Test |
English PDF |
| GB/T 43726-2024 |
Test methods for single liquid crystals {译} 无刷直流力矩电动机通用技术条件 |
China National Standards Test |
English PDF |
| GB/T 43822-2024 |
Geosynthetics-Dynamic perforation Test-Falling cone method {译} 纺织品-织物最大吸水量下干燥速率的测定 |
China National Standards Test |
English PDF |
| GB/T 15651.7-2024 |
Printed board assembly - Part 6: Evaluation requirements for voids in ball grid array (BGA) and land grid array (LGA) solder joints and Test methods {译} 半导体器件-第5-7部分：光电子器件-光电二极管和光电晶体管 |
China National Standards Test |
English PDF |
| GB/T 43789.31-2024 |
Electronic paper display devices - Part 3-2: Test methods for optoelectronic properties {译} 电子纸显示器件-第3-1部分：光学性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43789.11-2024 |
Electronic paper display devices - Part 3-1: Test methods for optical properties {译} 电子纸显示器件-第1-1-部分：术语 |
China National Standards Test |
English PDF |
| GB/T 43590.501-2024 |
Laser display devices - Part 5-3: Test methods for image quality of laser projection displays (screens) {译} 激光显示器件-第5-1-部分：激光前投影显示光学性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43692-2024 |
Laser display devices - Part 5-1: Test methods for optical performance of laser front projection displays {译} 量子通信术语和定义 |
China National Standards Test |
English PDF |
| GB/T 43703-2024 |
Ski resorts - Safety requirements and Test methods for protective pads {译} 滑雪场地-安全网的安全要求和试验方法 |
China National Standards Test |
English PDF |
| GB/T 43701-2024 |
Ski resorts - Safety requirements and Test methods for safety nets {译} 滑雪场地-滑雪道安全防护规范 |
China National Standards Test |
English PDF |
| GB/T 18910.4-2024 |
Optical performance Test methods for curved organic light emitting diode (OLED) light sources {译} 液晶显示器件-第4部分：液晶显示模块和屏-基本额定值和特性 |
China National Standards Test |
English PDF |
| GB/T 43801-2024 |
Test methods for relative dielectric constant and loss tangent of copper-clad laminates in the microwave band - Separate dielectric resonator method {译} 微波频段覆铜箔层压板相对介电常数和损耗正切值测试方法-分离介质谐振器法 |
China National Standards Test |
English PDF |
| GB/T 43786-2024 |
Audio, video and information technology equipment - Routine electrical safety Tests during production {译} 音频、视频和信息技术设备-生产过程中的例行电气安全试验 |
China National Standards Test |
English PDF |
| GB/T 43693-2024 |
Test methods for M2M platforms for logistics information services in mobile communication networks {译} 移动通信网络面向物流信息服务的M2M平台测试方法 |
China National Standards Test |
English PDF |
| GB/T 4937.35-2024 |
Semiconductor devices - Mechanical and climatic Test methods - Part 35: Acoustic microscopy of plastic encapsulated electronic components {译} 半导体器件-机械和气候试验方法-第35部分：塑封电子元器件的声学显微镜检查 |
China National Standards Test |
English PDF |
| GB/T 4937.34-2024 |
Semiconductor devices - Mechanical and climatic Test methods - Part 34: Power cycling {译} 半导体器件-机械和气候试验方法-第34部分：功率循环 |
China National Standards Test |
English PDF |
| GB/T 38624.3-2024 |
Internet of Things - Gateway - Part 3: Gateway Test method for access to public telecommunications networks {译} 物联网-网关-第3部分：面向公共电信网接入的网关测试方法 |
China National Standards Test |
English PDF |
| GB/T 21267-2024 |
Petroleum and natural gas industry - Test procedures for threaded connections of casing and oil pipes {译} 石油天然气工业-套管及油管螺纹连接试验程序 |
China National Standards Test |
English PDF |
| GB/T 43618-2023 |
Non-destructive Testing process tower gamma ray scanning method {译} 无损检测 工艺塔伽马射线扫描方法 |
China National Standards Test |
English PDF |
| GB/T 43615-2023 |
Additive manufacturing Ultrasonic Testing method of directed energy deposition metal forming parts {译} 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards Test |
English PDF |
| GB/T 43614-2023 |
Additive Manufacturing Metal Powder Directional Energy Deposition Equipment Laser Cladding Head Test Method {译} 增材制造 金属粉末定向能量沉积设备激光熔覆头测试方法 |
China National Standards Test |
English PDF |
| GB/T 43613-2023 |
Non-destructive Testing Digital radiography image processing and communication {译} 无损检测 数字射线检测图像处理与通信 |
China National Standards Test |
English PDF |
| GB/T 43606-2023 |
Test method for corrosion properties of corrosion-resistant steel used in cargo tanks of crude oil tankers {译} 原油船货油舱用耐蚀钢腐蚀性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43599-2023 |
Oil and gas drilling equipment Testing and evaluation of mechanical cementing plugs {译} 石油天然气钻采设备 机械式固井胶塞的测试与评价 |
China National Standards Test |
English PDF |
| GB/T 43597-2023 |
Parameter Testing method for pyroelectric terahertz detectors {译} 热电型太赫兹探测器参数测试方法 |
China National Standards Test |
English PDF |
| GB/T 43595-2023 |
Guidelines for start-up Testing and commissioning of hydraulic turbines, water pump turbines and energy storage pumps {译} 水轮机、水泵水轮机和蓄能泵启动试验及试运行导则 |
China National Standards Test |
English PDF |
| GB/T 43576-2023 |
Oral hygiene and care products. Laboratory Test method for the effectiveness of toothpaste in removing exogenous stains. {译} 口腔清洁护理用品 牙膏对去除外源性色斑效果的实验室测试方法 |
China National Standards Test |
English PDF |
| GB/T 43575-2023 |
Blockchain and distributed accounting technology system Testing specifications {译} 区块链和分布式记账技术 系统测试规范 |
China National Standards Test |
English PDF |
| GB/T 43552-2023 |
Comfort fans and their speed regulators for household and similar purposes - Performance Test methods {译} 家用和类似用途舒适风扇及其调速器 性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43550.2-2023 |
Mechanical pencils and lead for general use - Classification, dimensions, quality and Test methods - Part 2: Black lead {译} 一般用途活动铅笔和铅芯 分类、尺寸、质量和试验方法 第2部分：黑铅芯 |
China National Standards Test |
English PDF |
| GB/T 43550.1-2023 |
Mechanical pencils and lead for general use - Classification, dimensions, quality and Test methods - Part 1: Mechanical pencils {译} 一般用途活动铅笔和铅芯 分类、尺寸、质量和试验方法 第1部分：活动铅笔 |
China National Standards Test |
English PDF |
| GB/T 43549-2023 |
Footwear - Test methods for insoles - Static compression deformation {译} 鞋类 鞋垫试验方法 静态压缩变形 |
China National Standards Test |
English PDF |
| GB/T 43547-2023 |
Good Laboratory Practice (GLP) management, description and use of Test items {译} 良好实验室规范(GLP) 管理、描述和测试项目的使用 |
China National Standards Test |
English PDF |
| GB/T 43546-2023 |
Self-heating substance screening Test method {译} 自热物质筛选试验方法 |
China National Standards Test |
English PDF |
| GB/T 43544-2023 |
Oral cleaning and care products Laboratory Test method for the inhibition rate of toothpaste on dental calculus {译} 口腔清洁护理用品 牙膏对牙结石抑制率的实验室测试方法 |
China National Standards Test |
English PDF |
| GB/T 43534-2023 |
Design and Test method of AC side impedance of voltage source converter for high voltage direct current transmission {译} 高压直流输电用电压源换流器交流侧阻抗设计及测试方法 |
China National Standards Test |
English PDF |
| GB/T 43531-2023 |
Optical performance Testing method for multi-view stitching panoramic imaging equipment {译} 多目拼接全景成像设备光学性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43530-2023 |
Performance Test method for lobster eye focusing optical components {译} 龙虾眼型聚焦光学元件性能测试方法 |
China National Standards Test |
English PDF |
| GB/T 43527-2023 |
Ship electrical equipment Electromagnetic compatibility Optimization of ship cable laying Test methods for laying spacing {译} 船舶电气设备 电磁兼容性 船舶电缆敷设优化 敷设间距的试验方法 |
China National Standards Test |
English PDF |
| GB/T 43515-2023 |
High-altitude scientific balloon release Test procedures {译} 高空科学气球发放测试规程 |
China National Standards Test |
English PDF |
| GB/T 43504-2023 |
Flight performance flight Test requirements for large and medium-sized civilian fixed-wing UAVs {译} 民用大中型固定翼无人机飞行性能飞行试验要求 |
China National Standards Test |
English PDF |
| GB/T 43499-2023 |
Motor vehicle detection system software Testing method {译} 机动车检测系统软件测试方法 |
China National Standards Test |
English PDF |
| GB/T 43498-2023 |
Pipeline erosion and corrosion Test method {译} 管路冲刷腐蚀试验方法 |
China National Standards Test |
English PDF |
| GB/T 43493.3-2023 |
Semiconductor devices - Non-destructive Testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 3: Photoluminescence detection method of defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分：缺陷的光致发光检测方法 |
China National Standards Test |
English PDF |
| GB/T 43493.2-2023 |
Semiconductor devices - Non-destructive Testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 2: Optical detection methods for defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第2部分：缺陷的光学检测方法 |
China National Standards Test |
English PDF |
| GB/T 43493.1-2023 |
Semiconductor devices - Non-destructive Testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 1: Defect classification {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第1部分：缺陷分类 |
China National Standards Test |
English PDF |
| GB/T 43491-2023 |
Steel wire rope - Creep Test method {译} 钢丝绳 蠕变试验方法 |
China National Standards Test |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
