Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43073-2023 |
Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers {译} 气动 测量排气消声器声压级的试验方法 |
China National Standards Test method measuring |
 English PDF |
| GB/T 22264.8-2022 |
Mounted electrical measuring instruments with digital display - Part 8: Test methods {译} 安装式数字显示电测量仪表 第8部分：试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 13789-2022 |
Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester {译} 用单片测试仪测量电工钢带(片)磁性能的方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 9966.9-2021 |
Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency 天然石材试验方法 第9部分：通过测量共振基本频率测定动力弹性模数 |
China National Standards Test method measuring |
English PDF |
| GB/T 1551-2021 |
Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method 硅单晶电阻率的测定 直排四探针法和直流两探针法 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2507-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) 电子设备用机电元件 基本试验规程及测量方法 第25-7部分：试验25g：阻抗、反射系数和电压驻波比（VSWR） |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2505-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5：Test 25e: Return loss 电子设备用机电元件 基本试验规程及测量方法 第25-5部分：试验25e：回波损耗 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2504-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay 电子设备用机电元件 基本试验规程及测量方法 第25-4部分：试验25d：传输时延 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2503-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation 电子设备用机电元件 基本试验规程及测量方法 第25-3部分：试验25c：上升时间衰减 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2502-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss) 电子设备用机电元件 基本试验规程及测量方法 第25-2部分：试验25b：衰减（插入损耗） |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2501-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio 电子设备用机电元件 基本试验规程及测量方法 第25-1部分：试验25a：串扰比 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2307-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors 电子设备用机电元件 基本试验规程及测量方法 第23-7部分：屏蔽和滤波试验 试验23g：连接器的有效转移阻抗 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2304-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain 电子设备用机电元件 基本试验规程及测量方法 第23-4部分：屏蔽和滤波试验 试验23d：时域内传输线的反射 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6113.104-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分：无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards Test method measuring |
English PDF |
| GB/T 26277-2021 |
Test method for measuring electrical resistance of tyres 轮胎电阻测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 38952-2020 |
Non-destructive testing—Testing method for measuring residual stress using bulk wave 无损检测 残余应力超声体波检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 38898-2020 |
Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 34874.6-2020 |
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces 产品几何技术规范（GPS） X射线三维尺寸测量机 第6部分：工件的检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2509-2020 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests－Test 25i: Alien crosstalk 电子设备用机电元件 基本试验规程及测量方法 第25-9部分：信号完整性试验 试验25i：外来串扰 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2506-2020 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6：Test 25f：Eye pattern and jitter 电子设备用机电元件 基本试验规程及测量方法 第25-6部分：试验25f：眼图和抖动 |
China National Standards Test method measuring |
English PDF |
| GB/T 39605-2020 |
Test method for measuring the evaporative resistance of clothing—Sweating manikin method 服装湿阻测试方法 出汗暖体假人法 |
China National Standards Test method measuring |
English PDF |
| GB/T 37158-2018 |
Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT) 无损检测-工业计算机层析成像（CT）检测最大可检测钢厚度测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6113.105-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分：无线电骚扰和抗扰度测量设备-5MHz～18GHz天线校准场地和参考试验场地 |
China National Standards Test method measuring |
English PDF |
| GB/T 35839-2018 |
Non-destructive testing—Test method for measuring industrial computed tomography (CT) density 无损检测 工业计算机层析成像（CT）密度测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/Z 6113.401-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分：不确定度、统计学和限值建模 标准化EMC试验的不确定度 |
China National Standards Test method measuring |
English PDF |
| GB/T 34481-2017 |
Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices 低位错密度锗单晶片腐蚀坑密度(EPD)的测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 7676.9-2017 |
Direct acting indicating analogue electrical measuring instruments and their accessories—Part 9：Recommended test methods 直接作用模拟指示电测量仪表及其附件 第9部分：推荐的试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 519-2017 |
Test methods for measuring physical properties of pneumatic tyres 充气轮胎物理性能试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 33580-2017 |
Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 19389-2016 |
Test method of measuring rolling circumference for truck tyres 载重汽车轮胎滚动周长试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6113.104-2016 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分: 无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards Test method measuring |
English PDF |
| GB/T 32651-2016 |
Test method for measuring trace elements in photovoltaic-grade silicon by high-mass resolution glow discharge mass spectrometry 采用高质量分辨率辉光放电质谱法测量太阳能级硅中痕量元素的测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 32281-2015 |
Test method for measuring oxygen, carbon, boron and phosphorus in solar silicon wafers and feedstock by secondary ion mass spectrometry 太阳能级硅片和硅料中氧、碳、硼和磷量的测定 二次离子质谱法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24578-2015 |
Test method for measuring surface metal contamination on silicon wafers by total reflection X-Ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 32073-2015 |
Non-destructive testing—Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave 无损检测 残余应力超声临界折射纵波检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 31854-2015 |
Test method for measuring metallic impurities content in silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料中金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 4739-2015 |
Test method for measuring the colorimetry of ceramic pigment 日用陶瓷颜料色度测定方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 15614-2015 |
Test method for measuring the glossiness of ceramic pigment 日用陶瓷颜料光泽度测定方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30868-2014 |
Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching 碳化硅单晶片微管密度的测定 化学腐蚀法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30867-2014 |
Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers 碳化硅单晶片厚度和总厚度变化测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30866-2014 |
Test method for measuring diameter of monocrystalline silicon carbide wafers 碳化硅单晶片直径测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30842-2014 |
Electromagnetic shielding effectiveness specification and measuring method for high voltage testing enclosures 高压试验室电磁屏蔽效能要求与测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30195-2013 |
Test method for measuring impact performance of motor vehicle tyres 汽车轮胎耐撞击性能试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 30194-2013 |
Test method for measuring the rolling circumference of agricultural tyres 农业轮胎滚动周长测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 11446.5-2013 |
Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry 电子级水中痕量金属的原子吸收分光光度测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29852-2013 |
Test method for measuring Phosphorus, Arsenic and Antimony in silicon materials used for photovoltaic applications by secondary ion mass spectrometry 光伏电池用硅材料中P、As、Sb施主杂质含量的二次离子质谱测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29851-2013 |
Test method for measuring Boron and Aulminium in silicon materials used for photovoltaic applications by secondary ion mass spectrometry 光伏电池用硅材料中B、Al受主杂质含量的二次离子质谱测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29850-2013 |
Test method for measuring compensation degree of silicon materials used for photovoltaic applications 光伏电池用硅材料补偿度测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29849-2013 |
Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料表面金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29507-2013 |
Test method for measuring flatness, thickness and total thickness variation on silicon wafers by automated non-contact scanning 硅片平整度、厚度及总厚度变化测试 自动非接触扫描法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29505-2013 |
Test method for measuring surface roughness on planar surfaces of silicon wafer 硅片平坦表面的表面粗糙度测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 29067-2012 |
Non-destructive testing - Test method for measuring industrial computed tomography (CT) image 无损检测 工业计算机层析成像（CT）图像测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 28786-2012 |
Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards Test method measuring |
English PDF |
| GB/T 28861-2012 |
Test method for measuring melt fluidity of encapsulating material of powdered epoxy 环氧粉末包封料熔融流动性试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 521-2012 |
Test method of measuring peripheral dimensions for tyres 轮胎外缘尺寸测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 27694-2011 |
Safety of industrial trucks - Test methods for measuring vibration 工业车辆安全 振动的测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 27693-2011 |
Safety of industrial trucks - Test methods for measuring noise emissions 工业车辆安全 噪声辐射的测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 27903-2011 |
Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux 电梯层门耐火试验 完整性、隔热性和热通量测定法 |
China National Standards Test method measuring |
English PDF |
| GB/T 26963.2-2011 |
Crumb ambient-machine-oriented waste tire recycling line - Part 2: Testing and measuring methods 废旧轮胎常温机械法制取橡胶粉生产线 第2部分：检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 26277-2010 |
Test method for measuring electrical resistance of tyres 轮胎电阻测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/Z 6113.405-2010 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分：不确定度、统计学和限值建模替换试验方法的使用条件 |
China National Standards Test method measuring |
English PDF |
| GB/T 22264.8-2009 |
Mounted digital display electric measuring instruments - Part 8: Recommended test methods 安装式数字显示电测量仪表 第8部分：推荐的试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6620-2009 |
Test method for measuring warp on silicon slices by noncontact scanning 硅片翘曲度非接触式测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6617-2009 |
Test method for measuring resistivity of silicon wafer using spreading resistance probe 硅片电阻率测定 扩展电阻探针法 |
China National Standards Test method measuring |
English PDF |
| GB/T 6616-2009 |
Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge 半导体硅片电阻率及硅薄膜薄层电阻测试方法 非接触涡流法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24578-2009 |
Test method for measuring surface metal contamination on silicon wafers by total reflection X-ray fluorescence spectroscopy 硅片表面金属沾污的全反射X光荧光光谱测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24576-2009 |
Test method for measuring the Al fraction in AlGaAs on GaAs substrates by high resolution X-ray diffraction 高分辩率X射线衍射测量GaAs衬底生长的AlGaAs中Al成分的试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24575-2009 |
Test method for measuring surface sodium,aluminum,potassium,and iron on silicon and epi substrates by secondary ion mass spectrometry 硅和外延片表面Na、Al、K和Fe的二次离子质谱检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24582-2009 |
Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-inductively coupled plasma mass spectrometry 酸浸取 电感耦合等离子质谱仪测定多晶硅表面金属杂质 |
China National Standards Test method measuring |
English PDF |
| GB/T 24580-2009 |
Test method for measuring boron contamination in heavily doped n-type silicon substrates by secondary ion mass spectrometry 重掺n型硅衬底中硼沾污的二次离子质谱检测方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 24579-2009 |
Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-atomic absorption spectroscopy 酸浸取 原子吸收光谱法测定多晶硅表面金属污染物 |
China National Standards Test method measuring |
English PDF |
| GB/T 1551-2009 |
Test method for measuring resistivity of monocrystal silicon 硅单晶电阻率测定方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 14140-2009 |
Test method for measuring diameter of semiconductor wafer 硅片直径测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 13387-2009 |
Test method for measuring flat length wafers of silicon and other electronic materials 硅及其它电子材料晶片参考面长度测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 22628-2008 |
Test method of measuring rolling circumference for motorcycle tyres 摩托车轮胎滚动周长试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 10175.2-2008 |
Earth moving machinery - Loaders and backhoe loaders - Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height 土方机械 装载机和挖掘装载机 第2部分：掘起力和最大提升高度提升能力的测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 11344-2008 |
Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method 无损检测 接触式超声脉冲回波法测厚方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 17548-2008 |
Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南 |
China National Standards Test method measuring |
English PDF |
| GB/T 519-2008 |
Test methods for measuring physical properties of pneumatic tyres 充气轮胎物理性能试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 5262-2008 |
Agricultural machinery testing conditions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards Test method measuring |
English PDF |
| GB/T 6113.105-2008 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz～1000MHz天线校准用试验场地 |
China National Standards Test method measuring |
English PDF |
| GB/Z 6113.401-2007 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分: 不确定度、统计学和限值建模 标准化的EMC试验不确定度 |
China National Standards Test method measuring |
English PDF |
| GB/T 19922-2005 |
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning 硅片局部平整度非接触式标准测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 19475.1-2004 |
Micrographics--Methods of measuring image quality produced by aperture card scanners--Part 1:Characteristics of the test images 缩微摄影技术 开窗卡扫描仪制作影像质量的测量方法 第1部分:测试影像的特征 |
China National Standards Test method measuring |
English PDF |
| GB/T 19389-2003 |
Test method of measuring rolling circumference for truck tyres 载重汽车轮胎滚动周长试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 19388-2003 |
Test methods of measuring rolling circumference for passenger car tyres 轿车轮胎滚动周长试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 14828-2003 |
Test method for measuring traction performance of agricultural tyres 农业轮胎牵引性能试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 19248-2003 |
Test method for measuring the resistance of package leads 封装引线电阻测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 18902-2002 |
Performance requirements and test methods for UHF measuring distance equipment(MDE) 超高频测距仪性能要求和测试方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 17860.2-1999 |
Electrical measuring instruments--X-t recorders--Part 2:Recommended additional test methods 电测量仪器 X-t记录仪 第2部分:推荐的附加试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 11327.1-1999 |
Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 1:General test and measuring methods 聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第1部分:一般试验和测量方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 8554-1998 |
Transformers and inductors for use in electronic and telecommunication equipment--Measuring methodsand test procedures 电子和通信设备用变压器和电感器 测量方法及试验程序 |
China National Standards Test method measuring |
English PDF |
| GB/T 7676.9-1998 |
Direct acting indicating analogue electrical measuring instruments and their accessories--Part 9:Recom-mended test methods 直接作用模拟指示电测量仪表及其附件 第9部分:推荐的试验方法 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.9-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9:Miscellaneous tests 电子设备用机电元件 基本试验规程及测量方法 第9部分:杂项试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.8-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8:Connector tests(mechanical)and mechanical tests on contacts and terminations 电子设备用机电元件 基本试验规程及测量方法 第8部分:连接器、接触件及引出端的机械试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.7-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 7:Mechanical operating tests and sealing tests 电子设备用机电元件 基本试验规程及测量方法 第7部分:机械操作试验和密封性试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.6-1997 |
Electromechanical components for electronic equipment--Basic testing proceduresand measuring methods--Part 6:Climatic tests and soldering tests 电子设备用机电元件 基本试验规程及测量方法 第6部分:气候试验和锡焊试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.5-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components)，static load tests(fixed components)，endurance tests and overload tests 电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.4-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests 电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.3-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.2-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination，electrical continuity and contact resistance tests，insulationtests and voltage stress tests 电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.15-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application 电子设备用机电元件 基本试验规程及测量方法 第15部分:接触件和引出端的机械试验 第八篇:试验15h接触件固定机构耐工具使用性 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.12-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering 电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.1-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuringmethods--Part 1:General 电子设备用机电元件 基本试验规程及测量方法 第1部分:总则 |
China National Standards Test method measuring |
English PDF |
| GB/T 5095.11-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 11:Climatic tests 电子设备用机电元件 基本试验规程及测量方法 第11部分:气候试验 |
China National Standards Test method measuring |
English PDF |
| GB/T 16526-1996 |
Test method of measuring the lead-to-lead and loading capacitance of package leads 封装引线间电容和引线负载电容测试方法 |
China National Standards Test method measuring |
English PDF |
| Find out:108Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
