Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5270-2024 |
Metallic coatings on metal substrates - Electrodeposited and chemically deposited layers - Review of adhesion strength test methods {译} 金属基体上的金属覆盖层-电沉积和化学沉积层-附着强度试验方法评述 |
China National Standards Test methods metal |
 English PDF |
| GB/T 44030-2024 |
Metallic materials-High temperature compression test methods {译} 金属材料-高温压缩试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 18802.331-2024 |
Low voltage surge protector components - Part 331: Performance requirements and test methods for metal oxide varistors (MOVs) {译} 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 43896-2024 |
Metallic materials - Ultra-high cycle fatigue - Ultrasonic fatigue test methods {译} 金属材料-超高周疲劳-超声疲劳试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 43479-2023 |
Metal spinning forming performance and test methods Forming performance, forming indicators and general test procedures {译} 金属旋压成形性能与试验方法 成形性能、成形指标及通用试验规程 |
China National Standards Test methods metal |
English PDF |
| GB/T 23262-2023 |
Test methods for non-metallic sealing packings {译} 非金属密封填料试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room temperature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 42842.2-2023 |
Microbubble Technology Cleaning Applications Part 2: Test methods for cleaning mechanical oil stains on the surface of machined metal parts {译} 微细气泡技术 清洗应用 第2部分： 机加工金属零件表面机械油污清洗的试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 42672-2023 |
Corrosion of metals and alloys - Methods for monitoring environmental factors in surface seawater exposure tests {译} 金属和合金的腐蚀 表层海水暴露试验环境因素监测方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 239.2-2023 |
Metallic materials - wire rods - Part 2: Test methods for bidirectional torsion {译} 金属材料 线材 第2部分：双向扭转试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 42352-2023 |
Metallic coatings - Physical vapor deposition of cadmium coatings on iron and steel - Specifications and test methods {译} 金属覆盖层 钢铁上物理气相沉积镉涂层 技术规范与试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.7-2022 |
Test methods of precious metals pastes used for microelectronics—Part 7: Determination of solderability and solder leaching resistance 微电子技术用贵金属浆料测试方法 第7部分：可焊性、耐焊性测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 42259-2022 |
Metal and other inorganic coatings - Test methods for thermal cycle and thermal shock resistance of thermal barrier coatings {译} 金属及其他无机覆盖层 热障涂层耐热循环与热冲击性能测试方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 26957-2022 |
Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints {译} 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 41079.1-2021 |
Test methods for physical properties of liquid metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分：密度的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.412-2021 |
Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method 金属通信电缆试验方法 第4-12部分：电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.3-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.5-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials 非金属垫片材料分类体系及试验方法 第5部分：垫片材料蠕变松弛率试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.6-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分：垫片材料与金属表面黏附性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 13912-2020 |
Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层 技术要求及试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.1-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分:非金属垫片材料分类体系 |
China National Standards Test methods metal |
English PDF |
| GB/T 4334-2020 |
Corrosion of metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels 金属和合金的腐蚀 奥氏体及铁素体-奥氏体（双相）不锈钢晶间腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 38392-2019 |
Metallurgical equipment—Couplings—Test methods,inspecting rules and accptance codes 冶金设备 联轴器 试验方法、 检验规则及验收规范 |
China National Standards Test methods metal |
English PDF |
| GB/T 37306.2-2019 |
Metallic materials—Fatigue testing—Variable amplitude fatiguetesting—Part 2: Cycle counting and related data reduction methods 金属材料 疲劳试验 变幅疲劳试验 第2部分：循环计数和相关数据缩减方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 37169-2018 |
Metal mesh based PTFE strip specification and test methods 金属编织网基聚四氟乙烯软带技术要求和检验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 34542.2-2018 |
Storage and transportation systems for gaseous hydrogen—Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere 氢气储存输送系统 第2部分：金属材料与氢环境相容性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.411-2018 |
Metallic communication cable test methods—Part 4-11: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of patch cords,coaxial cable assemblies,pre-connectorized cables—Absorbing clamp method 金属通信电缆试验方法 第4-11部分：电磁兼容 跳线、同轴电缆组件、接连接器电缆的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards Test methods metal |
English PDF |
| GB/T 17737.310-2018 |
Coaxial communication cables—Part 1-310: Mechanical test methods—Test for torsion characteristics of copper-clad metals 同轴通信电缆 第1-310部分：机械试验方法 铜包金属的扭转特性试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 17737.308-2018 |
Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals 同轴通信电缆 第1-308部分：机械试验方法 铜包金属的抗拉强度和延伸率试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 34625-2017 |
Metallic and other inorganic coatings—Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes—Specification and test methods 金属及其他无机覆盖层 电气、电子和工程用金和金合金电镀层 技术规范和试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 15260-2016 |
Corrosion of metals and alloys—Test methods for intergranular corrosion of nickel alloys 金属和合金的腐蚀 镍合金晶间腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 32095.4-2015 |
Test specification on simulative test and evaluation methods with food for non-stick surface of domestic metal utensils for household food 家用食品金属烹饪器具不粘表面性能及测试规范 第4部分：食物模拟测试规范及评价方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 32095.3-2015 |
Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 3：Test specification of corrosion resistance 家用食品金属烹饪器具不粘表面性能及测试规范 第3部分：耐腐蚀性测试规范 |
China National Standards Test methods metal |
English PDF |
| GB/T 32095.2-2015 |
Performance and test methods of non-stick surface of domestic metal cooking utensils for household food—Part 2：Specification on non-stick performance and abrasion resistance 家用食品金属烹饪器具不粘表面性能及测试规范 第2部分：不粘性及耐磨性测试规范 |
China National Standards Test methods metal |
English PDF |
| GB/T 32095.1-2015 |
Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 1：General requirement of performance 家用食品金属烹饪器具不粘表面性能及测试规范 第1部分：性能通用要求 |
China National Standards Test methods metal |
English PDF |
| GB/T 20236-2015 |
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight 非金属材料的聚光加速户外暴露试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 32088-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus 汽车非金属部件及材料氙灯加速老化试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31881-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus 汽车非金属部件及材料紫外加速老化试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.406-2015 |
Metallic communication cable test methods—Part 4-6: Electromagnetic compatibility (EMC)—Surface transfer impedance—Line injection method 金属通信电缆试验方法 第4-6部分：电磁兼容 表面转移阻抗 线注入法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31723.405-2015 |
Metallic communication cable test methods—Part 4-5: Electromagnetic compatibility (EMC)—Coupling or screening attenuation—Absorbing clamp method 金属通信电缆试验方法 第4-5部分：电磁兼容 耦合或屏蔽衰减 吸收钳法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31566-2015 |
Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods 金属覆盖层 物理气相沉积铝涂层 技术规范与检测方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 31050-2014 |
Energy efficiency test methods for metallurgy cranes 冶金起重机能效测试方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 4372.6-2014 |
Methods for chemical analysis of zincoxide produced by direct process―Part 6：Testing of metallic zinc 直接法氧化锌化学分析方法 第6部分：金属锌的检验 |
China National Standards Test methods metal |
English PDF |
| GB/T 30810-2014 |
Test methods for leachable ions of heavy metals in cement mortar 水泥胶砂中可浸出重金属的测定方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 29459.1-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 |
China National Standards Test methods metal |
English PDF |
| GB/T 25774.1-2010 |
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 |
China National Standards Test methods metal |
English PDF |
| GB/T 25495-2010 |
Test methods for metal releasing characteristics of getters 吸气剂金属释放特性测试方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 24518-2009 |
Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments 金属和合金的腐蚀 应力腐蚀室外暴露试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 24517-2009 |
Corrosion of metals and alloys - Outdoors exposure test methods for periodic water spray 金属和合金的腐蚀 户外周期喷淋暴露试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 24516.2-2009 |
Corrosion of metals and alloys - Atmospheric corrosion - Sun tracking exposure test methods 金属和合金的腐蚀 大气腐蚀 跟踪太阳暴露试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 24196-2009 |
Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.8-2008 |
Sheet metal formability and test methods - Part 8: Guidelines for the determination of forming-limit diagrams 金属薄板成形性能与试验方法 第8部分：成形极限图(FLD)测定指南 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.7-2008 |
Sheet metal formability and test methods - Part 7: Earing test 金属薄板成形性能与试验方法 第7部分：凸耳试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.6-2008 |
Sheet metal formability and test methods - Part 6: Conical cup test 金属薄板成形性能与试验方法 第6部分：锥杯试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.5-2008 |
Sheet metal formability and test methods - Part 5: Bending test 金属薄板成形性能与试验方法 第5部分：弯曲试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.4-2008 |
Sheet metal formability and test methods - Part 4: Method of hole expanding test 金属薄板成形性能与试验方法 第4部分：扩孔试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.3-2008 |
Sheet metal formability and test methods - Part 3: Drawing and drawing load test 金属薄板成形性能与试验方法 第3部分：拉深与拉深载荷试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.2-2008 |
Sheet metal formability and test methods - Part 2: General test rules 金属薄板成形性能与试验方法 第2部分：通用试验规程 |
China National Standards Test methods metal |
English PDF |
| GB/T 15825.1-2008 |
Sheet metal formability and test methods - Part 1: Formability and indexes 金属薄板成形性能与试验方法 第1部分：成形性能和指标 |
China National Standards Test methods metal |
English PDF |
| GB/T 4339-2008 |
Test methods for thermal expansion characteristic parameters of metallic materials 金属材料热膨胀特征参数的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 4334-2008 |
Corrosion of metals and alloys - Test methods for intergranular corrosion of stainless steels 金属和合金的腐蚀 不锈钢晶间腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 8364-2008 |
Test methods of thermal flexure of thermostat metals 热双金属热弯曲试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 6384-2008 |
The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 22218-2008 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods 船舶与海上技术 配有弹性密封件的金属管路附件耐火性能 试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 13913-2008 |
Metallic coatings - Autocatalytic (Electroless) nickel-phosphorus alloy coatings - Specification and test methods 金属覆盖层 化学镀镍-磷合金镀层 规范和试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 3903.19-2008 |
Footwear - Test methods for accessories:Metallic accessories - Corrosion resistance 鞋类 金属附件试验方法 耐腐蚀性 |
China National Standards Test methods metal |
English PDF |
| GB/T 12605-2008 |
Non-destructive testing － Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes 无损检测 金属管道熔化焊环向对接接头射线照相检测方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 2652-2008 |
Tensile test methods on weld and deposited metal 焊缝及熔敷金属拉伸试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.7-2008 |
Test methods of precious metals pastes used for microelectronics - Determination of solderability and solderelaching resistance 微电子技术用贵金属浆料测试方法 可焊性、耐焊性测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.6-2008 |
Test methods of precious metal pastes used for microelectronics - Determination of resolution 微电子技术用贵金属浆料测试方法 分辨率测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.4-2008 |
Test methods of precious metals pastes used for microelectronics - Determination of adhesion 微电子技术用贵金属浆料测试方法 附着力测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.3-2008 |
Test methods of precious metals pastes used for microelectronics Determination of sheet resistance 微电子技术用贵金属浆料测试方法 方阻测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.2-2008 |
Test methods of presious metals pastes used for microelectronics - Determination of fineness 微电子技术用贵金属浆料测试方法 细度测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17473.1-2008 |
Test methods of precious metals pastes used for microelectronics-Determination of solids content 微电子技术用贵金属浆料测试方法 固体含量测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 15072.7-2008 |
Test methods of precious metal alloys - Determination of chromium and iron contents for gold alloys - Inductively coupled plasma atomic emission spectrometry 贵金属合金化学分析方法 金合金中铬和铁量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards Test methods metal |
English PDF |
| GB/T 3048.2-2007 |
Test methods for electrical properties of electric cables and wires - Part 2：Test of electrical resistivity of metallic materials 电线电缆电性能试验方法 第2部分：金属材料电阻率试验 |
China National Standards Test methods metal |
English PDF |
| GB/T 20432.5-2007 |
Photography Photographic-grade chemicals - Test methods Part 5： Determination of heavy metals and iron content 摄影 照相级化学品 试验方法 第5部分：重金属和铁含量的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.9-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.8-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials 非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.7-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.6-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.5-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.4-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials 非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.3-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.2-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.1-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.11-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20671.10-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 20170.1-2006 |
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 20170.1-2006 |
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 11020-2005 |
Flammability of solid non-metallic meterials when exposed to flame sources-List of test methods 固体非金属材料暴露在火焰源时的燃烧性试验方法清单 |
China National Standards Test methods metal |
English PDF |
| GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards Test methods metal |
English PDF |
| GB/T 6461-2002 |
Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards Test methods metal |
English PDF |
| GB/T 12599-2002 |
Metallic coatings--Electroplated coatings of tin--Specification and test methods 金属覆盖层 锡电镀层 技术规范和试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 13912-2002 |
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 12496.22-1999 |
Test methods of wooden activated carbon--Determination of heavy metals 木质活性炭试验方法 重金属的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 17849-1999 |
Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法 |
China National Standards Test methods metal |
English PDF |
| GB/T 12307.3-1997 |
Metalliccoatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3:Determination of the presence of residual salts 金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定 |
China National Standards Test methods metal |
English PDF |
| GB/T 12305.6-1997 |
Metalliccoating--Test methods for electrodeposited gold and gold alloy coatings--Part 6:Determination of the presence of residual salts 金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定 |
China National Standards Test methods metal |
English PDF |
| Find out:111Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
