China Test methods oil GB Standards List

China "Test methods oil" GB Standards List:

Standard Code	Standard Title	Standard Class	Order
GB/T 44053-2024	Hydraulic transmission-Test methods for water separation performance of oil purifiers {译} 液压传动-净油机水分离性能的试验方法	China National Standards Test methods oil	English PDF
GB/T 43911-2024	Evaluation methods for uncertainty in boiler thermal performance tests {译} 锅炉热工性能试验不确定度的评定方法	China National Standards Test methods oil	English PDF
GB/T 43288-2023	Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. {译} 塑料农业和园艺地膜用土壤生物降解材料生物降解性能、生态毒性和成分控制的要求和试验方法	China National Standards Test methods oil	English PDF
GB/T 42842.2-2023	Microbubble Technology Cleaning Applications Part 2: Test methods for cleaning mechanical oil stains on the surface of machined metal parts {译} 微细气泡技术清洗应用第2部分：机加工金属零件表面机械油污清洗的试验方法	China National Standards Test methods oil	English PDF
GB/T 22638.11-2023	Test methods for aluminum foil Part 11: Testing of mechanical properties {译} 铝箔试验方法第11部分：力学性能的测试	China National Standards Test methods oil	English PDF
GB/T 41633.3-2022	Insulating liquids - Determination of acid value - Part 3: Test methods for non-mineral insulating oils {译} 绝缘液体酸值的测定第3部分：非矿物绝缘油的试验方法	China National Standards Test methods oil	English PDF
GB/T 8243.12-2021	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法第12部分：颗粒计数法滤清效率和容灰量	China National Standards Test methods oil	English PDF
GB/T 8243.14-2020	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验	China National Standards Test methods oil	English PDF
GB/T 13277.5-2019	Compressed air—Part 5: Test methods for oil vapour and organic solvent content 压缩空气第5部分：油蒸气及有机溶剂测量方法	China National Standards Test methods oil	English PDF
GB/T 8243.5-2018	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法第5部分：冷起动模拟和液压脉冲耐久试验	China National Standards Test methods oil	English PDF
GB/T 8243.15-2018	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法第15部分：复合材料滤清器的振动疲劳试验	China National Standards Test methods oil	English PDF
GB/T 33883-2017	Test methods for stress corrosion of 7XXX series aluminium alloys—Boiling sodium chloride solution method 7XXX系铝合金应力腐蚀试验沸腾氯化钠溶液法	China National Standards Test methods oil	English PDF
GB/T 8243.7-2017	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7：Vibration fatigue test 内燃机全流式机油滤清器试验方法第7部分：振动疲劳试验	China National Standards Test methods oil	English PDF
GB/T 8243.6-2017	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法第6部分：静压耐破度试验	China National Standards Test methods oil	English PDF
GB/T 22638.9-2016	Test methods for aluminium and aluminium alloy foils—Part 9: Determination of hydrophilic property 铝箔试验方法第9部分：亲水性的检测	China National Standards Test methods oil	English PDF
GB/T 22638.5-2016	Test methods for aluminium and aluminium alloy foils—Part 5：Determination of wettability 铝箔试验方法第5部分：润湿性的检测	China National Standards Test methods oil	English PDF
GB/T 22638.6-2016	Test methods for aluminium and aluminium alloy foils—Part 6: Determination of direct current resistance 铝箔试验方法第6部分：直流电阻的测定	China National Standards Test methods oil	English PDF
GB/T 22638.3-2016	Test methods for aluminium and aluminium alloy foils—Part 3：Determination of stickiness 铝箔试验方法第3部分：粘附性的检测	China National Standards Test methods oil	English PDF
GB/T 22638.10-2016	Test methods for aluminium and aluminium alloy foils—Part 10：Determination of mass per unit area (surface density) of coatings 铝箔试验方法第10部分：涂层表面密度的测定	China National Standards Test methods oil	English PDF
GB/T 22638.7-2016	Test methods for aluminium and aluminium alloy foils－Part 7：Determination of heat seal strength 铝箔试验方法第7部分：热封强度的测定	China National Standards Test methods oil	English PDF
GB/T 22638.8-2016	Test methods for aluminum and aluminum alloy foils－Part 8: Determination of cube texture content 铝箔试验方法第8部分：立方面织构含量的测定	China National Standards Test methods oil	English PDF
GB/T 22638.2-2016	Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole 铝箔试验方法第2部分：针孔的检测	China National Standards Test methods oil	English PDF
GB/T 22638.4-2016	Test methods for aluminium and aluminium alloy foils—Part 4：Determination of surface wetting tension 铝箔试验方法第4部分：表面润湿张力的测定	China National Standards Test methods oil	English PDF
GB/T 22638.1-2016	Test methods for aluminium and aluminium alloy foils—Part 1: Determination of thickness 铝箔试验方法第1部分: 厚度的测定	China National Standards Test methods oil	English PDF
GB/T 13277.2-2015	Compressed air—Part 2: Test methods for oil aerosol content 压缩空气第2部分：悬浮油含量测量方法	China National Standards Test methods oil	English PDF
GB/T 32217-2015	Hydraulic fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications 液压传动密封装置评定液压往复运动密封件性能的试验方法	China National Standards Test methods oil	English PDF
GB/T 8243.13-2015	Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法第13部分：复合材料滤清器的静压耐破度试验	China National Standards Test methods oil	English PDF
GB/T 31457-2015	The testing and calculation methods for water balance in oil-gas field production system 油气田生产系统水平衡测试和计算方法	China National Standards Test methods oil	English PDF
GB/T 5211.15-2014	General methods of test for pigments and extenders―Part 15：Determination of oil absorption value 颜料和体质颜料通用试验方法第15部分：吸油量的测定	China National Standards Test methods oil	English PDF
GB/T 30475.2-2013	Filters for compressed air― Test methods―Part 2: Oil vapours 压缩空气过滤器试验方法第2部分:油蒸气	China National Standards Test methods oil	English PDF
GB/T 30475.1-2013	Filters for compressed air―Test methods―Part 1: Oil aerosols 压缩空气过滤器试验方法第1部分：悬浮油	China National Standards Test methods oil	English PDF
GB/T 29847-2013	Test methods for copper foil used for printed boards 印制板用铜箔试验方法	China National Standards Test methods oil	English PDF
GB/T 8243.9-2012	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法第9部分：进、出口止回阀试验	China National Standards Test methods oil	English PDF
GB/T 10820-2011	Thermal efficiency and test methods of boilers for daily life 生活锅炉热效率及热工试验方法	China National Standards Test methods oil	English PDF
GB/T 13917.4-2009	Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 4: Mosquito coil 农药登记用卫生杀虫剂室内药效试验及评价第4部分：蚊香	China National Standards Test methods oil	English PDF
GB/T 22638.9-2008	Test methods for aluminium and aluminium alloy foils - Part 9: Determination of hydrophilic property 铝箔试验方法第9部分：亲水性的测定	China National Standards Test methods oil	English PDF
GB/T 22638.7-2008	Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength 铝箔试验方法第7部分：热封强度的测定	China National Standards Test methods oil	English PDF
GB/T 22638.6-2008	Test methods for aluminium and aluminium alloy foils - Part 6: Determination of direct current resistance 铝箔试验方法第6部分：直流电阻的测定	China National Standards Test methods oil	English PDF
GB/T 22638.5-2008	Test methods for aluminium and aluminium alloy foils - Part 5: Determination of wettability by brushing 铝箔试验方法第5部分：刷水试验方法	China National Standards Test methods oil	English PDF
GB/T 22638.4-2008	Test methods for aluminium and aluminium alloy foils - Part 4: Determination of surface wetting tension 铝箔试验方法第4部分：表面润湿张力的测定	China National Standards Test methods oil	English PDF
GB/T 22638.3-2008	Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness 铝箔试验方法第3部分：粘附性的测定	China National Standards Test methods oil	English PDF
GB/T 22638.2-2008	Test methods for aluminium and aluminium alloy foils - Part 2: Determination of porosity 铝箔试验方法第2部分：针孔的检测	China National Standards Test methods oil	English PDF
GB/T 22638.1-2008	Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method 铝箔试验方法第1部分：厚度的测定重量法	China National Standards Test methods oil	English PDF
GB/T 22638.10-2008	Test methods for aluminium and aluminium alloy foils - Part 10: Determination of mass per unit area (surface density) of coatings 铝箔试验方法第10部分：涂层表面密度的测定	China National Standards Test methods oil	English PDF
GB/T 540-2008	Test methods for oil-resisting compressed asbestos fibre jointing 耐油石棉橡胶板试验方法	China National Standards Test methods oil	English PDF
GB/T 2951.51-2008	Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component 电缆和光缆绝缘和护套材料通用试验方法第51部分：填充膏专用试验方法滴点油分离低温脆性总酸值腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率	China National Standards Test methods oil	English PDF
GB/T 2951.21-2008	Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests 电缆和光缆绝缘和护套材料通用试验方法第21部分：弹性体混合料专用试验方法耐臭氧试验-热延伸试验-浸矿物油试验	China National Standards Test methods oil	English PDF
GB/T 6072.1-2008	Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机性能第1部分：功率、燃料消耗和机油消耗的标定及试验方法通用发动机的附加要求	China National Standards Test methods oil	English PDF
GB/T 8243.12-2007	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法第12部分：采用颗粒计数法测定滤清效率和容灰量	China National Standards Test methods oil	English PDF
GB/T 8243.11-2007	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法第11部分：自净式滤清器	China National Standards Test methods oil	English PDF
GB/T 8243.7-2006	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法第7部分:振动疲劳试验	China National Standards Test methods oil	English PDF
GB/T 8243.6-2006	Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法第6部分：静压耐破度试验	China National Standards Test methods oil	English PDF
GB/T 8243.5-2006	Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法第5部分：冷起动模拟和液压脉冲耐久试验	China National Standards Test methods oil	English PDF
GB/T 8243.4-2003	Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法第4部分: 原始滤清效率、寿命和累积效率(重量法)	China National Standards Test methods oil	English PDF
GB/T 8243.3-2003	Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法第3部分: 耐高压差和耐高温特性	China National Standards Test methods oil	English PDF
GB/T 8243.2-2003	Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法第2部分: 滤芯旁通阀特性	China National Standards Test methods oil	English PDF
GB/T 8243.1-2003	Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法第1部分:压差-流量特性	China National Standards Test methods oil	English PDF

Find out:57Items | To Page of: First -Previous-Next -Last | 1

- Since 2001 -
Focus on China Standards & Compliance Services

www.gbstandards.org
China National Standards