Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44152-2024 |
Ultrasonic testing methods for seamless steel pipe ends {译} 无缝钢管管端超声检测方法 |
China National Standards Ultra |
 English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-controlled array Ultrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards Ultra |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-Ultrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards Ultra |
English PDF |
| GB/T 31211.1-2024 |
Non-destructive testing-Ultrasonic guided wave testing-Part 1: General rules {译} 无损检测-超声导波检测-第1部分：总则 |
China National Standards Ultra |
English PDF |
| GB/T 31211.2-2024 |
Non-destructive testing-Ultrasonic guided wave testing-Part 2: Magnetostriction method {译} 无损检测-超声导波检测-第2部分：磁致伸缩法 |
China National Standards Ultra |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: Ultrasonic testing by time-of-flight diffraction {译} 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 43873-2024 |
Test method for upper and lower limit temperature of Ultra-thin glass annealing {译} 超薄玻璃退火上下限温度试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 43888-2024 |
Ultrasonic testing method for rails {译} 钢轨超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 43896-2024 |
Metallic materials - Ultra-high cycle fatigue - Ultrasonic fatigue test methods {译} 金属材料-超高周疲劳-超声疲劳试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 43900-2024 |
Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components {译} 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 43921-2024 |
Non-destructive testing-Ultrasonic testing-Full matrix acquisition/full focusing technology (FMC/TFM) {译} 无损检测-超声检测-全矩阵采集/全聚焦技术（FMC/TFM） |
China National Standards Ultra |
English PDF |
| GB/T 6519-2024 |
Ultrasonic Inspection Methods for Deformed Aluminum and Magnesium Alloy Products {译} 变形铝、镁合金产品超声波检验方法 |
China National Standards Ultra |
English PDF |
| GB/T 43817-2024 |
Radiation measurement method of Ultraviolet radiation sources {译} 紫外辐射源的辐射测量方法 |
China National Standards Ultra |
English PDF |
| GB/T 43615-2023 |
Additive manufacturing Ultrasonic testing method of directed energy deposition metal forming parts {译} 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 43480-2023 |
Non-destructive testing Phased array Ultrasonic cylindrical imaging guided wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards Ultra |
English PDF |
| GB/Z 43410-2023 |
Non-destructive testing Automatic Ultrasonic testing System selection and application {译} 无损检测 自动超声检测 系统选择和应用 |
China National Standards Ultra |
English PDF |
| GB/T 3310-2023 |
Ultrasonic testing method for copper and copper alloy rods {译} 铜及铜合金棒材超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: Ultrasonic non-destructive testing of bond quality for alloys with thickness ≥0.5mm {译} 滑动轴承 多层金属滑动轴承 第1部分：合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards Ultra |
English PDF |
| GB/T 43232-2023 |
Fasteners - Ultrasonic measurement method of axial stress {译} 紧固件 轴向应力超声测量方法 |
China National Standards Ultra |
English PDF |
| GB/T 43320-2023 |
Non-destructive testing of welds, Ultrasonic testing, application of automatic phased array technology for thin-walled steel components {译} 焊缝无损检测 超声检测 薄壁钢构件自动相控阵技术的应用 |
China National Standards Ultra |
English PDF |
| GB/T 29712-2023 |
Weld non-destructive testing Ultrasonic testing Acceptance level {译} 焊缝无损检测 超声检测 验收等级 |
China National Standards Ultra |
English PDF |
| GB/T 29711-2023 |
Non-destructive testing of welds Ultrasonic testing Characteristics of internal discontinuities in welds {译} 焊缝无损检测 超声检测 焊缝内部不连续的特征 |
China National Standards Ultra |
English PDF |
| GB/T 11345-2023 |
Weld non-destructive testing Ultrasonic testing technology, testing levels and assessments {译} 焊缝无损检测 超声检测 技术、检测等级和评定 |
China National Standards Ultra |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Ultra |
English PDF |
| GB/T 21461.1-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ultra |
English PDF |
| GB/T 43142-2023 |
Ultra-high pressure water jet ship rust removal complete equipment {译} 超高压水射流船舶除锈成套装备 |
China National Standards Ultra |
English PDF |
| GB/T 43014-2023 |
Polyimide Ultra short fiber {译} 聚酰亚胺超短纤维 |
China National Standards Ultra |
English PDF |
| GB/T 19258.2-2023 |
Sources of Ultraviolet radiation for germicidal purposes Part 2: Cold cathode low pressure mercury vapor discharge lamps {译} 杀菌用紫外辐射源 第2部分：冷阴极低气压汞蒸气放电灯 |
China National Standards Ultra |
English PDF |
| GB/T 42844-2023 |
Micro-bubble technology Storage and transportation of Ultra-fine bubble water dispersion system {译} 微细气泡技术 超细气泡水分散体系的存储和运输 |
China National Standards Ultra |
English PDF |
| GB/T 42843.1-2023 |
Microbubble Technology Measurement Sampling and Sample Preparation Part 1: Ultrafine Bubble Water Dispersion System {译} 微细气泡技术 测量取样及样品制备 第1部分：超细气泡水分散体系 |
China National Standards Ultra |
English PDF |
| GB/T 26725-2023 |
Ultrafine tungsten carbide powder {译} 超细碳化钨粉 |
China National Standards Ultra |
English PDF |
| GB/T 42664-2023 |
Non-destructive testing of steel pipes Automatic Ultrasonic detection of longitudinal and/or transverse defects in welded steel pipe seams {译} 钢管无损检测 焊接钢管焊缝纵向和/或横向缺欠的自动超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 42662-2023 |
Non-destructive testing of steel pipes Automatic Ultrasonic detection of delamination defects in steel strips/plates for welded steel pipes {译} 钢管无损检测 焊接钢管用钢带/钢板分层缺欠的自动超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 20490-2023 |
Non-destructive testing of steel pipes Automatic Ultrasonic detection of delamination defects in seamless and welded steel pipes {译} 钢管无损检测 无缝和焊接钢管分层缺欠的自动超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 42872-2023 |
Non-destructive testing Ultrasonic testing and evaluation methods for in-service steam turbine blades {译} 无损检测 在役汽轮机叶片超声检测和评价方法 |
China National Standards Ultra |
English PDF |
| GB/T 12604.13-2023 |
Non-destructive testing - Terminology - Part 13: Array Ultrasonic testing {译} 无损检测 术语 第13部分：阵列超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 7233.2-2023 |
Steel castings - Ultrasonic testing - Part 2: High pressure steel castings {译} 铸钢件 超声检测 第2部分：高承压铸钢件 |
China National Standards Ultra |
English PDF |
| GB/T 42645-2023 |
Identification of Jewelry and Jade-Ultraviolet-Visible Absorption Spectroscopy {译} 珠宝玉石鉴定 紫外-可见吸收光谱法 |
China National Standards Ultra |
English PDF |
| GB/T 42592-2023 |
Wind turbines - Ultrasonic testing method for wind rotor blades {译} 风力发电机组 风轮叶片超声波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 18604-2023 |
Measuring natural gas flow with a gas Ultrasonic flowmeter {译} 用气体超声流量计测量天然气流量 |
China National Standards Ultra |
English PDF |
| GB/T 11060.13-2023 |
Natural gas - Determination of sulfur compounds - Part 13: Determination of hydrogen sulfide content by Ultraviolet absorption method {译} 天然气 含硫化合物的测定 第13部分：用紫外吸收法测定硫化氢含量 |
China National Standards Ultra |
English PDF |
| GB/T 7233.1-2023 |
Steel castings - Ultrasonic testing - Part 1: Steel castings for general purposes {译} 铸钢件 超声检测 第1部分：一般用途铸钢件 |
China National Standards Ultra |
English PDF |
| GB/T 42399.3-2023 |
Non-destructive testing instruments - Performance and inspection of phased array Ultrasonic equipment - Part 3: Combined systems {译} 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 |
China National Standards Ultra |
English PDF |
| GB/T 42399.2-2023 |
Non-destructive testing instruments - Performance and inspection of phased array Ultrasonic equipment - Part 2: Probes {译} 无损检测仪器 相控阵超声设备的性能与检验 第2部分：探头 |
China National Standards Ultra |
English PDF |
| GB/T 42399.1-2023 |
Non-destructive testing instruments - Performance and inspection of phased array Ultrasonic equipment - Part 1: Instruments {译} 无损检测仪器 相控阵超声设备的性能与检验 第1部分：仪器 |
China National Standards Ultra |
English PDF |
| GB/T 41645-2022 |
General technical specification for Ultra-high pressure food quality control {译} 超高压食品质量控制通用技术规范 |
China National Standards Ultra |
English PDF |
| GB/T 41655-2022 |
Nondestructive Testing Ultrasonic Testing Welding, Rolling and Explosive Composite Cladding Testing Technology {译} 无损检测 超声检测 焊接、轧制和爆炸复合覆层检测技术 |
China National Standards Ultra |
English PDF |
| GB/T 16422.3-2022 |
Plastics - laboratory light source exposure test methods - Part 3: fluorescent Ultraviolet lamps {译} 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Ultra |
English PDF |
| GB/T 14571.4-2022 |
Test methods for ethylene glycol for industrial use Part 4: Determination of Ultraviolet transmittance ultraviolet spectrophotometric method {译} 工业用乙二醇试验方法 第4部分：紫外透光率的测定 紫外分光光度法 |
China National Standards Ultra |
English PDF |
| GB/T 4162-2022 |
Ultrasonic testing method for forged and rolled steel bars {译} 锻轧钢棒超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 41484-2022 |
Ultrasonic sensor assembly for automobile {译} 汽车用超声波传感器总成 |
China National Standards Ultra |
English PDF |
| GB/T 29461-2012 |
No. 1 Amendment List for Ultrasonic Testing of Polyethylene Pipeline Electrofusion Joints {译} 聚乙烯管道电熔接头超声检测《第1号修改单》 |
China National Standards Ultra |
English PDF |
| GB/T 7966-2022 |
Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements 声学 超声功率测量 辐射力天平法及其要求 |
China National Standards Ultra |
English PDF |
| GB/T 12967.4-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of Ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 |
China National Standards Ultra |
English PDF |
| GB/T 41133-2022 |
Determination of lycopene, lutein and carotene in tomato products—Ultra performance liquid chromatography（UPLC） method 番茄制品中番茄红素、叶黄素、胡萝卜素含量的测定 超高效液相色谱法 |
China National Standards Ultra |
English PDF |
| GB/T 41966-2022 |
Phased array Ultrasonic testing method for seamless steel pipe {译} 无缝钢管相控阵超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 19258.1-2022 |
Germicidal Ultraviolet radiation sources - part 1: low pressure mercury vapor discharge lamps {译} 杀菌用紫外辐射源 第1部分:低气压汞蒸气放电灯 |
China National Standards Ultra |
English PDF |
| GB/T 37141.1-2022 |
Guidelines for Ultraviolet Imaging Inspection of Electrical Equipment in High Altitude Areas Part 1: Substations {译} 高海拔地区电气设备紫外线成像检测导则 第1部分：变电站 |
China National Standards Ultra |
English PDF |
| GB/T 22131-2022 |
Ultrasonic Testing Method for the Inner Surface of Cylindrical Forgings {译} 筒形锻件内表面超声波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 40332-2021 |
Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment 无损检测 超声检测 超声测厚仪性能特征和测试方法 |
China National Standards Ultra |
English PDF |
| GB/T 40324-2021 |
Non-destructive testing—Testing method for large diameter round bars by focused Ultrasound 无损检测 大直径圆棒聚焦超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 40101-2021 |
Ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 23902-2021 |
Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities 无损检测 超声检测 超声衍射声时技术检测和评价方法 |
China National Standards Ultra |
English PDF |
| GB/T 11344-2021 |
Non-destructive testing—Ultrasonic thickness measurement 无损检测 超声测厚 |
China National Standards Ultra |
English PDF |
| GB/T 40169-2021 |
Compression-moulded plates of Ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards Ultra |
English PDF |
| GB/T 40023-2021 |
Non-destructive testing instruments - Ultrasonic time-of-flight diffraction instrument - Technical requirements 无损检测仪器 超声衍射声时检测仪 技术要求 |
China National Standards Ultra |
English PDF |
| GB/T 8361-2021 |
Ultrasonic testing method for the surface of cold drawn round steel 冷拉圆钢表面超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 39849-2021 |
Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests 无损检测仪器 超声衍射声时检测仪 性能测试方法 |
China National Standards Ultra |
English PDF |
| GB/T 39841-2021 |
Ultrasonic gas meters 超声波燃气表 |
China National Standards Ultra |
English PDF |
| GB/T 39815-2021 |
Test method for scratch resistance of Ultrathin glass 超薄玻璃抗划伤性能试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 39814-2021 |
Test method for impact strength of Ultrathin glass—Ball drop method 超薄玻璃抗冲击强度试验方法 落球冲击法 |
China National Standards Ultra |
English PDF |
| GB/T 18329.4-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive Ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm 滑动轴承 多层金属滑动轴承 第4部分: 合金厚度≥0.3mm的结合质量超声穿透无损检测 |
China National Standards Ultra |
English PDF |
| GB/T 2680-2021 |
Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, Ultraviolet transmittance and related glazing factors 建筑玻璃 可见光透射比、太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定 |
China National Standards Ultra |
English PDF |
| GB/T 41115-2021 |
Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) 焊缝无损检测 超声检测 衍射时差技术（TOFD）的应用 |
China National Standards Ultra |
English PDF |
| GB/T 41114-2021 |
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards Ultra |
English PDF |
| GB/T 41072-2021 |
Surface chemical analysis -- Electron spectroscopies -- Guidelines for Ultraviolet photoelectron spectroscopy analysis 表面化学分析 电子能谱 紫外光电子能谱分析指南 |
China National Standards Ultra |
English PDF |
| GB/T 40734-2021 |
Non-destructive testing of welds—Phased array Ultrasonic testing(PAUT)—Acceptance levels 焊缝无损检测 相控阵超声检测 验收等级 |
China National Standards Ultra |
English PDF |
| GB/T 40733-2021 |
Non-destructive testing of welds—Ultrasonic testing—Use of automated phased array technology 焊缝无损检测 超声检测 自动相控阵超声技术的应用 |
China National Standards Ultra |
English PDF |
| GB/T 40732-2021 |
Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys 焊缝无损检测 超声检测 奥氏体钢和镍基合金焊缝检测 |
China National Standards Ultra |
English PDF |
| GB/T 40730-2021 |
Non-destructive testing -- Measuring thickness by electromagnetic Ultrasonic pulse-echo 无损检测 电磁超声脉冲回波式测厚方法 |
China National Standards Ultra |
English PDF |
| GB/T 39114-2020 |
Nanotechnologies—Characterization of single-wall carbon nanotubes using Ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy 纳米技术 单壁碳纳米管的紫外/可见/近红外吸收光谱表征方法 |
China National Standards Ultra |
English PDF |
| GB/T 11060.8-2020 |
Natural gas—Determination of sulfur compounds—Part 8：Determination of total sulfur content by Ultraviolet fluorescence method 天然气 含硫化合物的测定 第8部分：用紫外荧光光度法测定总硫含量 |
China National Standards Ultra |
English PDF |
| GB 9706.205-2020 |
Medical electrical equipment—Part 2-5: Particular requirements for the basic safety and essential performance of Ultrasonic physiotherapy equipment 医用电气设备 第2-5部分：超声理疗设备的基本安全和基本性能专用要求 |
China National Standards Ultra |
English PDF |
| GB/T 38898-2020 |
Non-destructive testing—Testing method for measuring coating bond strength using Ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using Ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards Ultra |
English PDF |
| GB/T 38885-2020 |
General specification for Ultra-high cleanliness of high carbon chromium bearing steel 超高洁净高碳铬轴承钢通用技术条件 |
China National Standards Ultra |
English PDF |
| GB/T 38809-2020 |
General specification for low alloy Ultra-high strength steels 低合金超高强度钢通用技术条件 |
China National Standards Ultra |
English PDF |
| GB/T 3089-2020 |
Seamless Ultra-thin wall stainless steel tubes 不锈钢极薄壁无缝钢管 |
China National Standards Ultra |
English PDF |
| GB/T 38620-2020 |
Methods of evaluating the performance of Ultrasonic levelmeter 物位计性能评定方法 |
China National Standards Ultra |
English PDF |
| GB/T 38615-2020 |
General specification of Ultrasonic levelmeter 超声波物位计通用技术条件 |
China National Standards Ultra |
English PDF |
| GB 9706.237-2020 |
Medical electrical equipment—Part 2-37: Particular requirements for the basic safety and essential performance of Ultrasonic medical diagnostic and monitoring equipment 医用电气设备 第2-37部分：超声诊断和监护设备的基本安全和基本性能专用要求 |
China National Standards Ultra |
English PDF |
| GB 28235-2020 |
Hygienic requirements for Ultraviolet appliance of disinfection 紫外线消毒器卫生要求 |
China National Standards Ultra |
English PDF |
| GB/T 38712-2020 |
Test method for thermal conductivity of Ultrathin glass—Heat flow method 超薄玻璃导热系数试验方法 热流法 |
China National Standards Ultra |
English PDF |
| GB/T 38711-2020 |
Test method for reheating shrinkage of Ultrathin glass—Laser method 超薄玻璃再热线收缩率试验方法 激光法 |
China National Standards Ultra |
English PDF |
| GB/T 38686-2020 |
Test method for flexibility of Ultrathin glass—Two point bending method 超薄玻璃柔韧性试验方法 两点弯曲法 |
China National Standards Ultra |
English PDF |
| GB/T 6324.10-2020 |
Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method 有机化工产品试验方法 第10部分：有机液体化工产品微量硫的测定 紫外荧光法 |
China National Standards Ultra |
English PDF |
| GB/T 38683-2020 |
Method of Ultrasonic testing for large inclusions in bearing steel 轴承钢中大夹杂物的超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 5193-2020 |
Method of Ultrasonic inspection for wrought titanium and titanium alloy products 钛及钛合金加工产品超声检验方法 |
China National Standards Ultra |
English PDF |
| GB/T 38537-2020 |
Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards Ultra |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at Ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 38463-2020 |
General specification for Ultra-clean plastic bottle filling machine 超洁净塑料瓶灌装设备通用技术要求 |
China JB-Machinery Industry Standards Ultra |
English PDF |
| GB/T 39682-2020 |
Fine ceramics—Determination of elastic modulus at high temperature or Ultra-high temperature—Split ring relative method 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法 |
China National Standards Ultra |
English PDF |
| GB/T 39432-2020 |
Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block 无损检测 超声检测 阶梯试块 |
China National Standards Ultra |
English PDF |
| GB/T 39242-2020 |
Non-destructive testing—Ultrasonic testing—Sensitivity and range setting 无损检测 超声检测 灵敏度和范围设定 |
China National Standards Ultra |
English PDF |
| GB/T 39241-2020 |
Non-destructive testing—Ultrasonic testing—Transmission technique 无损检测 超声检测 穿透技术 |
China National Standards Ultra |
English PDF |
| GB/T 39240-2020 |
Non-destructive testing—Ultrasonic testing—General principles 无损检测 超声检测 总则 |
China National Standards Ultra |
English PDF |
| GB/T 39239-2020 |
Non-destructive testing—Ultrasonic testing—Characterization and sizing of discontinuities 无损检测 超声检测 不连续的特征和定量 |
China National Standards Ultra |
English PDF |
| GB/T 39238-2020 |
Non-destructive testing—Ultrasonic testing—Examination for discontinuities perpendicular to the surface 无损检测 超声检测 垂直于表面的不连续的检测 |
China National Standards Ultra |
English PDF |
| GB/T 34370.11-2020 |
Nondestructive testing of amusement equipments—Part 11: Ultrasonic guided wave testing 游乐设施无损检测 第11部分：超声导波检测 |
China National Standards Ultra |
English PDF |
| GB/T 18852-2020 |
Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams 无损检测 超声检测 测量接触探头声束特性的参考试块和方法 |
China National Standards Ultra |
English PDF |
| GB/T 12604.1-2020 |
Non-destructive testing—Terminology—Ultrasonic testing 无损检测 术语 超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 38481-2020 |
Determination of Ultralow-frequency mutations for microorganisms—Duplex sequencing 微生物超低频突变测定 双重测序法 |
China National Standards Ultra |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral Ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 38347-2019 |
Hot-rolled wire rod of Ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards Ultra |
English PDF |
| GB/T 38337-2019 |
General specification for Ultrasonic motor and driver 超声波电动机及其驱动控制器通用技术条件 |
China National Standards Ultra |
English PDF |
| GB/T 19837-2019 |
Ultraviolet (UV) disinfection equipment for urban water and wastewater engineering 城镇给排水紫外线消毒设备 |
China National Standards Ultra |
English PDF |
| GB/T 38347-2019 |
Hot-rolled wire rod of Ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards Ultra |
English PDF |
| GB/T 38337-2019 |
General specification for Ultrasonic motor and driver 超声波电动机及其驱动控制器通用技术条件 |
China National Standards Ultra |
English PDF |
| GB/T 19837-2019 |
Ultraviolet (UV) disinfection equipment for urban water and wastewater engineering 城镇给排水紫外线消毒设备 |
China National Standards Ultra |
English PDF |
| GB/T 37991-2019 |
Measuring method for Ultra-thin glass reheating line shrinkage—Dilatometer method 超薄玻璃再热线收缩率测试方法 膨胀仪法 |
China National Standards Ultra |
English PDF |
| GB/T 37900-2019 |
Test method of hardness and fracture toughness for Ultra-thin glass—Low-load vickers hardness indentation method 超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法 |
China National Standards Ultra |
English PDF |
| GB/T 37899-2019 |
Earth-moving machinery—Ultra-large hydraulic excavators 土方机械 超大型液压挖掘机 |
China National Standards Ultra |
English PDF |
| GB/T 37788-2019 |
Test method for elastic moduli of Ultra-thin glass 超薄玻璃弹性模量试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 26726-2019 |
Ultrafine tungsten powder 超细钨粉 |
China National Standards Ultra |
English PDF |
| GB/T 37578-2019 |
Urea grade Ultra-low carbon austenitic seamless stainless steel tubes and pipes
尿素级超低碳奥氏体不锈钢无缝钢管 |
China National Standards Ultra |
English PDF |
| GB/T 37566-2019 |
Method of Ultrasonic testing for round steel 圆钢超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral Ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 37361-2019 |
Determination of the film thickness—Ultrasonic thickness gauge method 漆膜厚度的测定 超声波测厚仪法 |
China National Standards Ultra |
English PDF |
| GB/T 37760-2019 |
Determination of perfluorooctanoic acid and perfluorooctane sulfonic acid in electronic and electrical products—Ultra high performance liquid chromatographic method with tandem mass spectrometry 电子电气产品中全氟辛酸和全氟辛烷磺酸的测定 超高效液相色谱串联质谱法 |
China National Standards Ultra |
English PDF |
| GB/T 37074-2018 |
Technical requirements of Ultraviolet excitation fluorescent anti-counterfeiting fiber 紫外激发荧光防伪纤维技术条件 |
China National Standards Ultra |
English PDF |
| GBZ/T 192.6-2018 |
Determination of dust in workplace air - Part 6: Total concentration of Ultrafine and fine granules 工作场所空气中粉尘测定-第6部分：超细颗粒和细颗粒总数量浓度 |
China National Standards Ultra |
English PDF |
| GB/T 36961-2018 |
Hot stamping process for Ultra-high strength steel—General specification 超高强钢热冲压工艺-通用技术 |
China National Standards Ultra |
English PDF |
| GB/T 26136-2018 |
Ultra-high pressure waterjet cutting machine 超高压水切割机 |
China National Standards Ultra |
English PDF |
| GB/T 36989-2018 |
Measurement of liquid hydrocarbons by Ultrasonic flow meters 用超声流量计测量液态烃流量 |
China National Standards Ultra |
English PDF |
| GB/T 37186-2018 |
Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy 气体分析-二氧化硫和氮氧化物的测定-紫外差分吸收光谱分析法 |
China National Standards Ultra |
English PDF |
| GB/T 36228-2018 |
Non-destructive testing—Guide for plannar flaw height sizing by Ultrasonic testing 无损检测 平面型伤高度超声定量导则 |
China National Standards Ultra |
English PDF |
| GB/T 36469-2018 |
Information technology—Telecommunications and information exchange between systems local and metropolitan area networks—Specific requirements—Medium access control (MAC) and physical layer (PHY) specification for Q frequency band Ultra high speed wi 信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 Q波段超高速无线局域网媒体访问控制和物理层规范 |
China National Standards Ultra |
English PDF |
| GB/T 36264-2018 |
Test method for tensile strength of fiber composites under Ultrahigh temperature and oxidizing environment 超高温氧化环境下纤维复合材料拉伸强度试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 36137-2018 |
Integrity test method for hollow fiber Ultrafiltration membrane module and microfiltration membrane module 中空纤维超滤膜和微滤膜组件完整性检验方法 |
China National Standards Ultra |
English PDF |
| GB/T 36744-2018 |
Forecasting method for Ultraviolet index 紫外线指数预报方法 |
China National Standards Ultra |
English PDF |
| GB/T 36594-2018 |
Method of Ultrasonic inspection for cemented carbide 硬质合金超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 35962-2018 |
Ultramarine 群青 |
China National Standards Ultra |
English PDF |
| GB/T 35916-2018 |
Simultaneous determination of 16 kinds of permitted sunscreen agents and other 8 kinds of Ultraviolet absorbents in cosmetics—HPLC 化妆品中16种准用防晒剂和其他8种紫外线吸收物质的测定 高效液相色谱法 |
China National Standards Ultra |
English PDF |
| GB/T 20935.3-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for Ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第3部分：利用电磁超声换能器技术进行超声表面检测的方法 |
China National Standards Ultra |
English PDF |
| GB/T 20935.2-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for Ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 |
China National Standards Ultra |
English PDF |
| GB/T 36042-2018 |
Specification of rotor forgings for Ultra-supercritical steam turbine 超超临界汽轮机转子体锻件技术条件 |
China National Standards Ultra |
English PDF |
| GB/T 36084-2018 |
Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry 纳米技术 水溶液中铜、锰、铬离子含量的测定 紫外-可见分光光度法 |
China National Standards Ultra |
English PDF |
| GB/T 34904-2017 |
Spheroidal graphite iron castings—Ultrasonic testing 球墨铸铁件 超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 34796-2017 |
Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry 水溶液中核酸的浓度和纯度检测 紫外分光光度法 |
China National Standards Ultra |
English PDF |
| GB/T 34885-2017 |
Non-destructive testing—Electromagnetic Ultrasonic testing—General principles 无损检测 电磁超声检测 总则 |
China National Standards Ultra |
English PDF |
| GB/T 34892-2017 |
Non-destructive testing—Test method for robotic Ultrasonic testing 无损检测 机械手超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 34984-2017 |
Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—MAC and PHY specification for Ultra high rate wireless personal area network 信息技术 系统间远程通信和信息交换 局域网和城域网 超高速无线个域网的媒体访问控制和物理层规范 |
China National Standards Ultra |
English PDF |
| GB/T 34918-2017 |
Determination of 7 sexual hormones in cosmetics—Ultra high performance liquid chromatography-tandem mass spectrometry 化妆品中七种性激素的测定 超高效液相色谱-串联质谱法 |
China National Standards Ultra |
English PDF |
| GB/T 34048-2017 |
Ultraviolet radiometer 紫外辐射表 |
China National Standards Ultra |
English PDF |
| GB/T 34485-2017 |
Method of Ultrasonic inspection for wrought zirconium and zirconium alloy products 锆及锆合金加工产品超声波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 34363-2017 |
Non-destructive testing—Test method for fabricating and checking aluminum alloy Ultrasonic standard reference blocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards Ultra |
English PDF |
| GB/T 34370.5-2017 |
Nondestructive testing of amusement equipments—Part 5：Ultrasonic testing 游乐设施无损检测 第5部分：超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 34407-2017 |
Test method for the wall thickness of plastic pipes by Ultrasonic 塑料管道壁厚超声波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 34638-2017 |
Non-destructive testing—Test methods for Ultrasonic leak detection 无损检测 超声泄漏检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 34171-2017 |
Test method for flexural property of thin and Ultrathin glass—Three-point bending method 薄与超薄玻璃弯曲性能试验方法 三点弯曲法 |
China National Standards Ultra |
English PDF |
| GB/T 34205-2017 |
Metallic materials—Hardness testing—Ultrasonic contact impedance method 金属材料 硬度试验 超声接触阻抗法 |
China National Standards Ultra |
English PDF |
| GB/T 34041.1-2017 |
Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement 封闭管道中流体流量的测量 气体超声流量计 第1部分:贸易交接和分输计量用气体超声流量计 |
China National Standards Ultra |
English PDF |
| GB/T 34041.2-2017 |
Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications 封闭管道中流体流量的测量 气体超声流量计 第2部分：工业测量用气体超声流量计 |
China National Standards Ultra |
English PDF |
| GB/T 34100-2017 |
Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method 轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法 |
China National Standards Ultra |
English PDF |
| GB/T 33888-2017 |
Non-destructive testing instruments—Characterization and verification of Ultrasonic thickness measuring equipment 无损检测仪器 超声测厚仪特性与验证 |
China National Standards Ultra |
English PDF |
| GB/T 33868-2017 |
Calibration method for Ultraviolet radiometer 紫外辐射表校准方法 |
China National Standards Ultra |
English PDF |
| GB/T 33866-2017 |
Measurement for solar Ultraviolet radiation—Broadband ultraviolet radiometer method 太阳紫外辐射测量 宽带紫外辐射表法 |
China National Standards Ultra |
English PDF |
| GB/T 34018-2017 |
Non-destructive testing—Test method for scanning Ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 34019-2017 |
Ultra-high pressure vessels 超高压容器 |
China National Standards Ultra |
English PDF |
| GB/T 33851-2017 |
Information technology－Telecommunications and information exchange between systems－Dual carrier based wireless high rate Ultra wideband physical layer test specification 信息技术 系统间远程通信和信息交换 基于双载波的无线高速率超宽带物理层测试规范 |
China National Standards Ultra |
English PDF |
| GB/T 33693-2017 |
Test method for Ultrasonic anemometer 超声波测风仪测试方法 |
China National Standards Ultra |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards Ultra |
English PDF |
| GB/T 35138-2017 |
Measurement of fluid flow in closed conduits—Ultrasonic transit-time meters for liquid 封闭管道中流体流量的测量 渡越时间法液体超声流量计 |
China National Standards Ultra |
English PDF |
| GB/Z 35717-2017 |
Discharge measurement for hydraulic turbines, storage pumps and pump-turbines—Ultrasonic transit-time method 水轮机、蓄能泵和水泵水轮机流量的测量 超声传播时间法 |
China National Standards Ultra |
English PDF |
| GB/T 35161-2017 |
Ultra-fine portland cement 超细硅酸盐水泥 |
China National Standards Ultra |
English PDF |
| GB/T 35241-2017 |
Test methods for volatile content of Ultraviolet curable coatings for wood products 木质制品用紫外光固化涂料挥发物含量的检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 35361-2017 |
Ultrasonic testing technique and quality classification for titanium butt weld joints on submersible 潜水器钛合金对接焊缝超声波检测及质量分级 |
China National Standards Ultra |
English PDF |
| GB/T 35693-2017 |
Technical specification for valvehall fittings of ±800kV Ultra high voltage direct current（UHVDC） transmission project ±800kV特高压直流输电工程阀厅金具技术规范 |
China National Standards Ultra |
English PDF |
| GB/T 25843-2017 |
Technical requirments of control and protection equipment of ±800 kV Ultra high voltage direct current transmission ±800 kV 特高压直流输电控制与保护设备技术要求 |
China National Standards Ultra |
English PDF |
| GB/T 33374-2016 |
Ultraviolet curable coatings—Determination of volatile content 紫外光固化涂料 挥发物含量的测定 |
China National Standards Ultra |
English PDF |
| GB/T 19701.1-2016 |
Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 1: Powder form 外科植入物 超高分子量聚乙烯 第1部分：粉料 |
China National Standards Ultra |
English PDF |
| GB/T 19701.2-2016 |
Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 2: Moulded forms 外科植入物 超高分子量聚乙烯 第2部分：模塑料 |
China National Standards Ultra |
English PDF |
| GB/T 33327-2016 |
Ultraviolet curable coatings—Assessment of the storage stability 紫外光固化涂料 贮存稳定性的评定 |
China National Standards Ultra |
English PDF |
| GB/T 33163-2016 |
Metallic materials—Residual stress—With Ultrasonic impact treatment 金属材料 残余应力 超声冲击处理法 |
China National Standards Ultra |
English PDF |
| GB/T 33087-2016 |
Ultra pure water for instrumental analysis specification and test methods 仪器分析用高纯水规格及试验方法 |
China National Standards Ultra |
English PDF |
| GB/T 32737-2016 |
Determination of nitrate nitrogen in soil—Ultraviolet spectrophotometry method 土壤硝态氮的测定 紫外分光光度法 |
China National Standards Ultra |
English PDF |
| GB/T 32679-2016 |
Ultra-high-molecular-weight polyethylene(PE-UHMW) resin 超高分子量聚乙烯（PE-UHMW）树脂 |
China National Standards Ultra |
English PDF |
| GB/T 32552-2016 |
Automated full peripheral Ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测 |
China National Standards Ultra |
English PDF |
| GB/T 32563-2016 |
Non-destructive testing—Ultrasonic testing—Test method for phased-array ultrasonic testing 无损检测 超声检测 相控阵超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 32522-2016 |
Acoustics—Electroacoustic characteristics and measurements of spherically focusing Ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards Ultra |
English PDF |
| GB/T 2970-2016 |
Method for Ultrasonic testing of thicker steel plates 厚钢板超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 32552-2016 |
Automated full peripheral Ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测 |
China National Standards Ultra |
English PDF |
| GB/T 32396-2015 |
Information technology—Telecommunications and information exchange between systems—Wireless high-rate Ultra wideband PHY specification based on single-carrier 信息技术 系统间远程通信和信息交换 基于单载波无线高速率超宽带（SC-UWB）物理层规范 |
China National Standards Ultra |
English PDF |
| GB/T 32360-2015 |
Test methods for Ultrafiltration membranes 超滤膜测试方法 |
China National Standards Ultra |
English PDF |
| GB/T 7734-2015 |
Method for Ultrasonic testing of clad steel plates 复合钢板超声检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 32073-2015 |
Non-destructive testing—Test method for measuring residual stress using Ultrasonic critical refracted longitudinal wave 无损检测 残余应力超声临界折射纵波检测方法 |
China National Standards Ultra |
English PDF |
| GB/T 19799.1-2015 |
Non-destructive testing—Ultrasonic testing—Specification for calibration block No. 1 无损检测 超声检测 1号校准试块 |
China National Standards Ultra |
English PDF |
| GB/T 11259-2015 |
Non-destructive testing—Practice for fabrication and control of steel reference blocks used in Ultrasonic testing 无损检测 超声检测用钢参考试块的制作和控制方法 |
China National Standards Ultra |
English PDF |
| GB/T 32092-2015 |
Ferms of Ultraviolet disinfection technology 紫外线消毒技术术语 |
China National Standards Ultra |
English PDF |
| GB/T 32091-2015 |
Ultraviolet equipment for water disinfection—Ultraviolet dose testing method 紫外线水消毒设备 紫外线剂量测试方法 |
China National Standards Ultra |
English PDF |
| Find out:348Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
