Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 41666.7-2024 |
Plastic pipe systems for trenchless repair of underground non-pressure drainage networks - Part 7: Spiral Winding lining method {译} 地下无压排水管网非开挖修复用塑料管道系统-第7部分：螺旋缠绕内衬法 |
China National Standards Winding |
 English PDF |
| GB/T 4074.1-2024 |
Test methods for Winding wires - Part 1: General provisions {译} 绕组线试验方法-第1部分：一般规定 |
China National Standards Winding |
English PDF |
| GB/T 4074.2-2024 |
Test methods for Winding wires - Part 2: Dimensional measurements {译} 绕组线试验方法-第2部分：尺寸测量 |
China National Standards Winding |
English PDF |
| GB/T 4074.3-2024 |
Test methods for Winding wires - Part 3: Mechanical properties {译} 绕组线试验方法-第3部分：机械性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.4-2024 |
Test methods for Winding wires - Part 4: Chemical properties {译} 绕组线试验方法-第4部分：化学性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.5-2024 |
Test methods for Winding wires - Part 5: Electrical properties {译} 绕组线试验方法-第5部分：电性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.6-2024 |
Test methods for Winding wires - Part 6: Thermal properties {译} 绕组线试验方法-第6部分：热性能 |
China National Standards Winding |
English PDF |
| GB/Z 43036-2023 |
Rotating electrical machines - Measurement of end vibration of stator formed Windings {译} 旋转电机 定子成型绕组端部振动的测量 |
China National Standards Winding |
English PDF |
| GB/Z 20833.5-2023 |
Rotating electrical machines - Winding insulation - Part 5: Offline measurement of partial discharge onset voltage under repeated impulse voltages {译} 旋转电机 绕组绝缘 第5部分：重复冲击电压下局部放电起始电压的离线测量 |
China National Standards Winding |
English PDF |
| GB/T 20833.4-2021 |
Rotating electrical machines—The Winding insulation—Part 4: Measurement of insulation resistance and polarization index 旋转电机 绕组绝缘 第4部分：绝缘电阻和极化指数测量 |
China National Standards Winding |
English PDF |
| GB/T 20833.1-2021 |
Rotating electrical machines—The Winding insulation—Part 1:Off-line partial discharge measurements 旋转电机 绕组绝缘 第1部分：离线局部放电测量 |
China National Standards Winding |
English PDF |
| GB/T 18737.2-2019 |
Textile machinery and accessories—Beams for Winding—Part 2: Warper’s beams 纺织机械与附件 经轴 第2部分：整经轴 |
China National Standards Winding |
English PDF |
| GB/T 37805-2019 |
Bamboo Winding composite pipe 竹缠绕复合管 |
China National Standards Winding |
English PDF |
| GB/T 17948.6-2018 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound Windings—Evaluation of thermomechanical endurance of insulation systems 旋转电机 绝缘结构功能性评定 成型绕组试验规程 绝缘结构热机械耐久性评定 |
China National Standards Winding |
English PDF |
| GB/T 20833.3-2018 |
Rotating electrical machines—Stator Winding insulation of rotating electrical machines—Part 3: Dielectric dissipation factor measurement 旋转电机 旋转电机定子绕组绝缘 第3部分：介质损耗因数测量 |
China National Standards Winding |
English PDF |
| GB/T 17948.1-2018 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for wire-wound Windings—Thermal evaluation and classification 旋转电机 绝缘结构功能性评定 散绕绕组试验规程 热评定和分级 |
China National Standards Winding |
English PDF |
| GB/T 4074.21-2018 |
Winding wires test methods—Part 21: Electrical endurance under high frequency voltage impulses 绕组线试验方法 第21部分：耐高频脉冲电压性能 |
China National Standards Winding |
English PDF |
| GB/T 17948.3-2017 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound Windings—Thermal evaluation and classification of insulation systems used in rotating machines 旋转电机 绝缘结构功能性评定 成型绕组试验规程 旋转电机绝缘结构热评定和分级 |
China National Standards Winding |
English PDF |
| GB/T 34665-2017 |
Measurement method of dielectric dissipation factor of electric machinery coil/Winding insulation 电机线圈/绕组绝缘介质损耗因数测量方法 |
China National Standards Winding |
English PDF |
| GB/T 34611-2017 |
Rigid polyurethane spray polyethylene Winding prefabricated directly buried insulating pipes 硬质聚氨酯喷涂聚乙烯缠绕预制直埋保温管 |
China National Standards Winding |
English PDF |
| GB/T 14331-2017 |
Automatic spring Winding machine—Testing of the accuracy 自动卷簧机 精度 |
China National Standards Winding |
English PDF |
| GB/T 20139.1-2016 |
Electrical insulation systems—Thermal evaluation of modifications to an established electrical insulation system(EIS)—Part 1: Wire-wound Winding EIS 电气绝缘系统 已确定等级的电气绝缘系统（EIS）组分调整的热评定 第1部分：散绕绕组EIS |
China National Standards Winding |
English PDF |
| GB 51184-2016 |
Code for design of mine Winding tower 矿山提升井塔设计规范 |
China National Standards Winding |
English PDF |
| GB/T 20833.2-2016 |
Rotating electrical machines—The stator Winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on 旋转电机 旋转电机定子绕组绝缘 第2部分：在线局部放电测量 |
China National Standards Winding |
English PDF |
| GB/T 20833.1-2016 |
Rotating electrical machines—The stator Winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements 旋转电机 旋转电机定子绕组绝缘 第1部分：离线局部放电测量 |
China National Standards Winding |
English PDF |
| GB/T 20140-2016 |
Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end Windings of cylindrical synchronous generators 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定 |
China National Standards Winding |
English PDF |
| GB/T 18737.9-2016 |
Textile machinery and accessories—Beams for Winding—Part 9: Dyeing beams for textile fabrics fabrics 纺织机械与附件 经轴 第9部分：织物染色用轴 |
China National Standards Winding |
English PDF |
| GB/T 18737.7-2016 |
Textile machinery and accessories—Beams for Winding—Part 7：Beams for dyeing slivers, rovings and yarns 纺织机械与附件 经轴 第7部分：条子、粗纱和纱线染色用轴 |
China National Standards Winding |
English PDF |
| GB/T 17948.5-2016 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound Windings—Multifactor evaluation by endurance under simultaneous thermal and electrical stresses 旋转电机 绝缘结构功能性评定 成型绕组试验规程 热、电综合应力耐久性多因子评定 |
China National Standards Winding |
English PDF |
| GB/T 17948.4-2016 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound Windings—Evaluation by electrical endurance 旋转电机 绝缘结构功能性评定 成型绕组试验规程 电压耐久性评定 |
China National Standards Winding |
English PDF |
| GB/T 28187-2011 |
Textile machinery - Dyeing and finishing machines - Square bars for Winding devices - Dimensions 纺织机械 染整机器 卷绕装置用方轴尺寸 |
China National Standards Winding |
English PDF |
| GB/T 27797.5-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament Winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 |
China National Standards Winding |
English PDF |
| GB/T 25300-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with one secondary Winding for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件 |
China National Standards Winding |
English PDF |
| GB/T 25299-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with two separate secondary Windings for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件 |
China National Standards Winding |
English PDF |
| GB/T 24349.6-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 6: Dimensions, tolerances and designation of tubes for cross wound packages in Winding and twisting 纺织机械与附件 圆柱形筒管 第6部分：卷绕和加捻用交叉卷绕筒管的尺寸、偏差和标记 |
China National Standards Winding |
English PDF |
| GB/T 18737.8-2009 |
Textile machinery and accessories - Beams for Winding - Part 8: Definitions of run-out tolerances and methods of measurement 纺织机械与附件 经轴 第8部分：跳动公差的定义和测量方法 |
China National Standards Winding |
English PDF |
| GB/T 4909.7-2009 |
Test methods for bare wires - Part 7: Mandrel Winding test 裸电线试验方法 第7部分：卷绕试验 |
China National Standards Winding |
English PDF |
| GB/T 4074.8-2009 |
Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method 绕组线试验方法 第8部分：测定漆包绕组线温度指数的试验方法 快速法 |
China National Standards Winding |
English PDF |
| GB/T 4074.7-2009 |
Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires 绕组线试验方法 第7部分：测定漆包绕组线温度指数的试验方法 |
China National Standards Winding |
English PDF |
| GB/T 23312.7-2009 |
Enamelled round aluminium Winding wire - Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 漆包铝圆绕组线 第7部分：200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.6-2009 |
Enamelled round aluminium Winding wire - Part 6: Polyester or polyesterimide overcoated with polyamide enamelled round aluminium wire, class 180 漆包铝圆绕组线 第6部分：180级聚酯或聚酯亚胺/聚酰胺复合漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.5-2009 |
Enamelled round aluminium Winding wire - Part 5: Polyesterimide enamelled round aluminium wire,class 180 漆包铝圆绕组线 第5部分：180级聚酯亚胺漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.4-2009 |
Enamelled round aluminium Winding wire - Part 4: Polyester enamelled round aluminium wire, class 155 漆包铝圆绕组线 第4部分：155级聚酯漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.3-2009 |
Enamelled round aluminium Winding wire - Part 3: Polyester enamelled round aluminium wire, class 130 漆包铝圆绕组线 第3部分：130级聚酯漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.2-2009 |
Enamelled round aluminium Winding wire - Part 2: Polyvinyl acetal enamelled round aluminium wire, class 120 漆包铝圆绕组线 第2部分：120级缩醛漆包铝圆线 |
China National Standards Winding |
English PDF |
| GB/T 23312.1-2009 |
Enamelled round aluminium Winding wire - Part 1: General requirements 漆包铝圆绕组线 第1部分：一般规定 |
China National Standards Winding |
English PDF |
| GB/T 22719.2-2008 |
Interturn insulation of random-wound Winding for AC low-voltage electrical machines - Part 2: Test limits 交流低压电机散嵌绕组匝间绝缘 第2部分：试验限值 |
China National Standards Winding |
English PDF |
| GB/T 22719.1-2008 |
Interturn insulation of random-wound Winding for AC low-voltage electrical machines - Part 1: Test methods 交流低压电机散嵌绕组匝间绝缘 第1部分：试验方法 |
China National Standards Winding |
English PDF |
| GB/T 22717-2008 |
Test specifications of interturn insulation of field pole coil and field Winding for electrical machines 电机磁极线圈及磁场绕组匝间绝缘试验规范 |
China National Standards Winding |
English PDF |
| GB/T 22716-2008 |
Test specifications of interturn insulation of armature Winding for DC electrical machines 直流电机电枢绕组匝间绝缘试验规范 |
China National Standards Winding |
English PDF |
| GB/T 22714-2008 |
Test specifications of interturn insulation of form-wound Winding for AC low-voltage electrical machines 交流低压电机成型绕组匝间绝缘试验规范 |
China National Standards Winding |
English PDF |
| GB/T 7672.6-2008 |
Glass-fiber wound Winding wires - Part 6: Glass-fiber and film wound rectangular copper wire 玻璃丝包绕组线 第6部分：玻璃丝包薄膜绕包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7672.5-2008 |
Glass-fiber wound Winding wires - Part 5: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 玻璃丝包绕组线 第5部分：200级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7672.4-2008 |
Glass-fiber wound Winding wires - Part 4: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 玻璃丝包绕组线 第4部分：180级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7672.3-2008 |
Glass-fiber wound Winding wires - Part 3: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 玻璃丝包绕组线 第3部分：155级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7672.24-2008 |
Glass-fiber wound Winding wires - Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 玻璃丝包绕组线 第24部分：200级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 7672.23-2008 |
Glass-fiber wound Winding wires - Part 23: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 玻璃丝包绕组线 第23部分：180级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 7672.22-2008 |
Glass-fiber wound Winding wires - Part 22: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 玻璃丝包绕组线 第22部分：155级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 7672.2-2008 |
Glass-fiber wound Winding wires - Part 2: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 130 玻璃丝包绕组线 第2部分：130级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7672.21-2008 |
Glass-fiber wound Winding wires - Part 21: Glass-fiber wound round copper wire - General requirements 玻璃丝包绕组线 第21部分：玻璃丝包铜圆绕组线 一般规定 |
China National Standards Winding |
English PDF |
| GB/T 7672.1-2008 |
Glass-fiber wound Winding wires - Part 1: Glass-fiber wound rectangular copper wire - General requirements 玻璃丝包绕组线 第1部分：玻璃丝包铜扁绕组线 一般规定 |
China National Standards Winding |
English PDF |
| GB/T 11018.2-2008 |
Copper Winding wires with silk covering - Part 2: Bunched solderable polyurethane enamelled round copper wires, class130, with silk covering 丝包铜绕组线 第2部分：130级丝包直焊聚氨酯漆包束线 |
China National Standards Winding |
English PDF |
| GB/T 11018.1-2008 |
Copper Winding wires with silk covering - Part 1: Single wire with silk covering 丝包铜绕组线 第1部分：丝包单线 |
China National Standards Winding |
English PDF |
| GB/T 1458-2008 |
Test method for mechanical properties of ring of filament-Winding reinforced plastics 纤维缠绕增强塑料环形试样力学性能试验方法 |
China National Standards Winding |
English PDF |
| GB/T 7095.7-2008 |
Enamelled rectangular copper Winding wires - Part 7:Polyester enamelled rectangular copper wire, class 130 漆包铜扁绕组线 第7部分：130级聚酯漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.6-2008 |
Enamelled rectangular copper Winding wires - Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 漆包铜扁绕组线 第6部分：200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.5-2008 |
Enamelled rectangular copper Winding wires - Part 5:Aromatic polyimide enamelled rectangular copper wire, class 240 漆包铜扁绕组线 第5部分：240级芳族聚酰亚胺漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.4-2008 |
Enamelled rectangular copper Winding wires - Part 4:Polyesterimide enamelled rectangular copper wire, class 180 漆包铜扁绕组线 第4部分：180级聚酯亚胺漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.3-2008 |
Enamelled rectangular copper Winding wires - Part 3:Polyester enamelled rectangular copper wire, class 155 漆包铜扁绕组线 第3部分：155级聚酯漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.2-2008 |
Enamelled rectangular copper Winding wires - Part 2:Polyvinyl acetal enamelled rectangular copper wire,class 120 漆包铜扁绕组线 第2部分：120级缩醛漆包铜扁线 |
China National Standards Winding |
English PDF |
| GB/T 7095.1-2008 |
Enamelled rectangular copper Winding wires - Part 1:General requirements 漆包铜扁绕组线 第1部分：一般规定 |
China National Standards Winding |
English PDF |
| GB/T 13958-2008 |
Test procedures for non-direct current excitation Winding synchronous motor 无直流励磁绕组同步电动机试验方法 |
China National Standards Winding |
English PDF |
| GB/T 9996.2-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibers，or their blends by Winding on the black board - Part 2: individual assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第2部分：分别评定法 |
China National Standards Winding |
English PDF |
| GB/T 9996.1-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibres,or their blends by Winding on the black board - Part 1:comprehensive assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第1部分：综合评定法 |
China National Standards Winding |
English PDF |
| GB/T 6109.9-2008 |
Enamelled round Winding wire - Part 9:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 130 漆包圆绕组线 第9部分：130级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.7-2008 |
Enamelled round Winding wire - Part 7:Polyester enamelled round copper wire,class 130L 漆包圆绕组线 第7部分：130L级聚酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.6-2008 |
Enamelled round Winding wire - Part 6:Polyimide enamelled round copper wire, class 220 漆包圆绕组线 第6部分：220级聚酰亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.5-2008 |
Enamelled round Winding wire - Part 5:Polyesterimide enamelled round copper wire,class 180 漆包圆绕组线 第5部分：180级聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.4-2008 |
Enamelled round Winding wire - Part 4:Solderable polyurethane enamelled round copper wire,class 130 漆包圆绕组线 第4部分：130级直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.3-2008 |
Enamelled round Winding wire - Part 3:Polyvinyl acetal enamelled round copper wire,class 120 漆包圆绕组线 第3部分：120级缩醛漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.23-2008 |
Enamelled round Winding wire - Part 23: Solderable polyurethane enamelled round copper wire,class 180 漆包圆绕组线 第23部分：180级直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.22-2008 |
Enamelled round Winding wire - Part 22: Aromatic polyimide enamelled round copper wire,class 240 漆包圆绕组线 第22部分：240级芳族聚酰亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.2-2008 |
Enamelled round Winding wire - Part 2: Polyester enamelled round copper wire,class 155 漆包圆绕组线 第2部分：155级聚酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.21-2008 |
Enamelled round Winding wire - Part 21: Polyester-amide-imide enamelled round copper wire,class 200 漆包圆绕组线 第21部分：200级聚酯-酰胺-亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.20-2008 |
Enamelled round Winding wire - Part 20: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200 漆包圆绕组线 第20部分：200级聚酰胺酰亚胺复合聚酯或聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.19-2008 |
Enamelled round Winding wire - Part 19: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200,with a bonding layer 漆包圆绕组线 第19部分：200级自粘性聚酰胺酰亚胺复合聚酯或聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.18-2008 |
Enamelled round Winding wire - Part 18: Polyesterimide enamelled round copper wire,class 180,with a bonding layer 漆包圆绕组线 第18部分：180级自粘性聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.17-2008 |
Enamelled round Winding wire - Part 17: Solderable polyesterimide enamelled round copper wire,class 180,with a bonding layer 漆包圆绕组线 第17部分：180级自粘性直焊聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.16-2008 |
Enamelled round Winding wire - Part 16: Solderable polyurethane enamelled round copper wire,class 155,with a bonding layer 漆包圆绕组线 第16部分：155级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.15-2008 |
Enamelled round Winding wire - Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer 漆包圆绕组线 第15部分：130级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.14-2008 |
Enamelled round Winding wire - Part 14: Polyamide-imide enamelled round copper wire,class 200 漆包圆绕组线 第14部分：200级聚酰胺酰亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.13-2008 |
Enamelled round Winding wire - Part 13: Solderable polyesterimide enamelled round copper wire,class 180 漆包圆绕组线 第13部分：180级直焊聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.12-2008 |
Enamelled round Winding wire - Part 12: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide,class 180 漆包圆绕组线 第12部分：180级聚酰胺复合聚酯或聚酯亚胺漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.1-2008 |
Enamelled round Winding wire - Part 1:General requirements 漆包圆绕组线 第1部分: 一般规定 |
China National Standards Winding |
English PDF |
| GB/T 6109.11-2008 |
Enamelled round Winding wire - Part 11: Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 155 漆包圆绕组线 第11部分：155级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 6109.10-2008 |
Enamelled round Winding wire - Part 10: Solderable polyurethane enamelled round copper wire,class 155 漆包圆绕组线 第10部分：155级直焊聚氨酯漆包铜圆线 |
China National Standards Winding |
English PDF |
| GB/T 4074.6-2008 |
Winding wires - Test methods - Part 6: Thermal properties 绕组线试验方法 第6部分：热性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.5-2008 |
Winding wires - Test methods - Part 5: Electrical properties 绕组线试验方法 第5部分：电性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.4-2008 |
Winding wires - Test methods - Part 4: Chemical properties 绕组线试验方法 第4部分：化学性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.3-2008 |
Winding wires - Test methods - Part 3: Mechanical properties 绕组线试验方法 第3部分：机械性能 |
China National Standards Winding |
English PDF |
| GB/T 4074.2-2008 |
Winding wires - Test methods - Part 2: Determination of dimensions 绕组线试验方法 第2部分：尺寸测量 |
China National Standards Winding |
English PDF |
| GB/T 4074.1-2008 |
Winding wires - Test methods - Part 1: General 绕组线试验方法 第1部分：一般规定 |
China National Standards Winding |
English PDF |
| GB/T 17948.6-2007 |
Rotating electrical machine - Functional evaluation of insulation systems - Test procedures for form-wound Windings - Evaluation of thermomechanical endurance of insulation systems 旋转电机绝缘结构功能性评定 成型绕组试验规程 绝缘结构热机械耐久性评定 |
China National Standards Winding |
English PDF |
| GB/T 17948.5-2007 |
Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound Windings - Multifactor functinal evaluation - Endurance under combined thermal and electrical stresses of insulation system used in machines up to 旋转电机绝缘结构功能性评定 成型绕组试验规程 多因子功能性评定 50MVA、15kV及以下电机绝缘结构热、电综合应力耐久性 |
China National Standards Winding |
English PDF |
| GB/T 20833-2007 |
The guide for partial discharge measurements and evaluation on stator bar and Winding insulation of rotating machinery 旋转电机定子线棒及绕组局部放电的测量方法及评定导则 |
China National Standards Winding |
English PDF |
| GB/T 17948.4-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound Windings - Electrical evaluation of insulation sysyems used in machines up to and including 50MVA and 15kV 旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构电评定 |
China National Standards Winding |
English PDF |
| GB/T 20140-2006 |
Dynamic characteristic and vibration measurement method of turbo-generators on stator Windings and evaluation criteria 透平型发电机定子绕组端部动态特性和振动试验方法及评定 |
China National Standards Winding |
English PDF |
| GB/T 17948.3-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound Windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV 旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级 |
China National Standards Winding |
English PDF |
| GB/T 17948.2-2006 |
Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound Windings - Classification of changes and insulation component substitutions 旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级 |
China National Standards Winding |
English PDF |
| GB/T 20035.5-2005 |
Textile machinery and accessories -- Cones for cross Winding -- Part 5: Dimensions,tolerances and designation of cones with half angle 5°57′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第5部分：半锥角5°57′圆锥形筒管的尺寸、公差和标记 |
China National Standards Winding |
English PDF |
| GB/T 20035.4-2005 |
Textile machinery and accessories -- Cones for cross Winding -- Part 4: Dimensions,tolerances and designation of cones with half angle 4°20′for winding for dyeing purposes 纺织机械与附件 交叉卷绕用圆锥形筒管 第4部分：半锥角4°20′染色用圆锥形筒管的尺寸、公差和标记 |
China National Standards Winding |
English PDF |
| GB/T 20035.3-2005 |
Textile machinery and accessories -- Cones for cross Winding -- Part 3: Dimensions,tolerances and designation of cones with half angle 4°20′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第3部分：半锥角4°20′圆锥形筒管的尺寸、公差和标记 |
China National Standards Winding |
English PDF |
| GB/T 20035.2-2005 |
Textile machinery and accessories -- Cones for cross Winding -- Part2: Dimensions,tolerances and designation of cones with half angle 3°30′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第2部分：半锥角3°30′圆锥形筒管的尺寸、公差和标记 |
China National Standards Winding |
English PDF |
| GB/T 20035.1-2005 |
Textile machinery and accessories -- Cones for cross Winding -- Part 1: Recommended main dimensions 纺织机械与附件 交叉卷绕用圆锥形筒管 第1部分：主要尺寸推荐值 |
China National Standards Winding |
English PDF |
| GB/T 7679.3-2005 |
Mining machinery terminology Part 3:Winding equipment 矿山机械术语 第3部分：提升设备 |
China National Standards Winding |
English PDF |
| GB/T 6002.5-2004 |
Textile machinery terminology--Part 5:Cone and cheese Winding machines 纺织机械术语 第5部分:络筒机 |
China National Standards Winding |
English PDF |
| GB/T 19386.2-2004 |
Textile machinery and accessories--Packages of yarns and intermediate products--Part 2:Forms ofWinding 纺织机械与附件 纱线和中间产品的卷装 第2部分:卷绕类型 |
China National Standards Winding |
English PDF |
| GB/T 18737.6-2004 |
Textile machinery and accessories--Beams for Winding--Part 6:Beams for ribbon weaving and ribbon knitting 纺织机械与附件 经轴 第6部分:织带机和钩编机用经轴 |
China National Standards Winding |
English PDF |
| GB/T 6002.14-2003 |
Textile machinery terminology--Part 14:Winding--Basic terms 纺织机械术语 第14部分:卷绕 基本术语 |
China National Standards Winding |
English PDF |
| GB/T 18737.4-2003 |
Textile machinery and accessories--Beams for Winding--Part 4:Quality classification of flanges for Weaver’s beams，warper’s beams and sectional beams 纺织机械与附件 经轴 第4部分:织轴、整经轴和分段整经轴边盘的质量等级 |
China National Standards Winding |
English PDF |
| GB/T 6002.6-2003 |
Textile machinery terminology--Part 6: Pirn Winding machines 纺织机械术语 第6部分: 卷纬机 |
China National Standards Winding |
English PDF |
| GB/T 18737.1-2002 |
Textile machinery and accessories--Beams for Winding--Part 1:General vocabulary 纺织机械与附件 经轴 第1部分:词汇 |
China National Standards Winding |
English PDF |
| GB/T 4850-2002 |
Test method for unWinding force of pressure sensitive adhesive tapes at low speed 压敏胶粘带低速解卷强度的测定 |
China National Standards Winding |
English PDF |
| GB/T 17948.1-2000 |
Rotating electrical machines--Functional evaluation of insulation systems--Test procedures for wire-wound Windings--Thermal evaluation and classification 旋转电机绝缘结构功能性评定 散绕绕组试验规程 热评定与分级 |
China National Standards Winding |
English PDF |
| GB/T 14331-1993 |
Automatic spring Winding machine--Testing of the accuracy 自动卷簧机 精度 |
China National Standards Winding |
English PDF |
| Find out:125Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
