Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 12967.6-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 |
China National Standards alloys— |
 English PDF |
| GB/T 12967.5-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 |
China National Standards alloys— |
English PDF |
| GB/T 12967.4-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 |
China National Standards alloys— |
English PDF |
| GB/T 12967.3-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第3部分：盐雾试验 |
China National Standards alloys— |
English PDF |
| GB/T 8754-2022 |
Anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Determination of electrical insulation 铝及铝合金阳极氧化膜及有机聚合物膜 绝缘性的测定 |
China National Standards alloys— |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards alloys— |
English PDF |
| GB/T 40393-2021 |
Corrosion of metals and alloys—Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀敏感性加速腐蚀试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 40339-2021 |
Corrosion of metals and alloys—Guidelines for assessing the significances of stress corrosion cracks detected in service 金属和合金的腐蚀 服役中检出的应力腐蚀裂纹的重要性评估导则 |
China National Standards alloys— |
English PDF |
| GB/T 40338-2021 |
Corrosion of metals and alloys—Exfoliation corrosion testing of aluminium alloys 金属和合金的腐蚀 铝合金剥落腐蚀试验 |
China National Standards alloys— |
English PDF |
| GB/T 40314-2021 |
Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 |
China National Standards alloys— |
English PDF |
| GB/T 40299-2021 |
Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing 金属和合金的腐蚀 腐蚀试验电化学测量方法适用惯例 |
China National Standards alloys— |
English PDF |
| GB/T 15970.10-2021 |
Corrosion of metals and alloys—Stress corrosion testing—Part l0: Reverse U-bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分：反向U型弯曲试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 8013.5-2021 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 5: Function coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第5部分：功能膜 |
China National Standards alloys— |
English PDF |
| GB/T 8013.4-2021 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 4: Texture coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第4部分：纹理膜 |
China National Standards alloys— |
English PDF |
| GB/T 1425-2021 |
Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 40377-2021 |
Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria 金属和合金的腐蚀 交流腐蚀的测定 防护准则 |
China National Standards alloys— |
English PDF |
| GB/T 5121.28-2021 |
Methods for chemical analysis of copper and copper alloys—Part 28：Determination of chromium,iron,manganese,cobalt,nickel,zinc,arsenic,selenium,silver,cadmium,tin,antimony,tellurium,lead and bismuth content—Inductively coupled plasma-mass spectrometry 铜及铜合金化学分析方法 第28部分：铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅和铋含量的测定 电感耦合等离子体质谱法 |
China National Standards alloys— |
English PDF |
| GB/T 40809-2021 |
Casting aluminum alloys—Process specification for semisolid rheo-diecasting forming 铸造铝合金 半固态流变压铸成形工艺规范 |
China National Standards alloys— |
English PDF |
| GB/T 18996-2021 |
Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using sodium chloride or potassium chloride 银合金首饰 银含量的测定 氯化钠或氯化钾容量法(电位滴定法) |
China National Standards alloys— |
English PDF |
| GB/T 17832-2021 |
Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using potassium bromide 银合金首饰 银含量的测定 溴化钾容量法(电位滴定法) |
China National Standards alloys— |
English PDF |
| GB/T 40796-2021 |
Corrosion of metals and alloys—Guidelines for applying statistics to analysis of corrosion data 金属和合金的腐蚀 腐蚀数据分析应用统计学指南 |
China National Standards alloys— |
English PDF |
| GB/T 39534-2020 |
Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids 金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法 |
China National Standards alloys— |
English PDF |
| GB/T 39138.1-2020 |
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 1：Determination of gold content—Potentiometric titration using ferrous sulfate 金镍铬铁硅硼合金化学分析方法 第1部分：金含量的测定 硫酸亚铁电位滴定法 |
China National Standards alloys— |
English PDF |
| GB/T 39138.2-2020 |
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 2：Determination of nickel content—Dimethylglyoxime gravimetric method 金镍铬铁硅硼合金化学分析方法 第2部分：镍含量的测定 丁二酮肟重量法 |
China National Standards alloys— |
English PDF |
| GB/T 39138.3-2020 |
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 3：Determination of chromium, iron, silicon and boron contents—Inductively coupled plasma atomic emission spectrometry 金镍铬铁硅硼合金化学分析方法 第3部分：铬、铁、硅、硼含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 39143-2020 |
Methods for chemical analysis of gold-arsenic alloys—Determination of arsenic content—Inductively coupled plasma atomic emission spectrometry 金砷合金化学分析方法 砷含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 39154-2020 |
Corrosion of metals and alloys—Cathodic protection of steel in concrete 金属和合金的腐蚀 混凝土用钢筋的阴极保护 |
China National Standards alloys— |
English PDF |
| GB/T 39155-2020 |
Corrosion of metals and alloys—Cathodic protection of harbour installations 金属和合金的腐蚀 海港设施的阴极保护 |
China National Standards alloys— |
English PDF |
| GB/T 20975.6-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 6: Determination of cadmium content 铝及铝合金化学分析方法 第6部分：镉含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.17-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 17: Determination of strontium content 铝及铝合金化学分析方法 第17部分：锶含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.37-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 37:Determination of niobium content 铝及铝合金化学分析方法 第37部分：铌含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.4-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 4:Determination of iron content 铝及铝合金化学分析方法 第4部分：铁含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.5-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 5：Determination of silicon content 铝及铝合金化学分析方法 第5部分：硅含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.7-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 7:Determination of manganese content 铝及铝合金化学分析方法 第7部分：锰含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.9-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 9:Determination of lithium content—Flame atomic absorption spectrometry 铝及铝合金化学分析方法 第9部分：锂含量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.10-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 10：Determination of tin content 铝及铝合金化学分析方法 第10部分：锡含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.12-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 12: Determination of titanium content 铝及铝合金化学分析方法 第12部分：钛含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.14-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 14：Determination of nickel content 铝及铝合金化学分析方法 第14部分：镍含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.16-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 16：Determination of magnesium content 铝及铝合金化学分析方法 第16部分：镁含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.18-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 18:Determination of chromium content 铝及铝合金化学分析方法 第18部分：铬含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.22-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 22:Determination of beryllium content 铝及铝合金化学分析方法 第22部分：铍含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.24-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 24：Determination of total rare earth content 铝及铝合金化学分析方法 第24部分：稀土总含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.25-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method 铝及铝合金化学分析方法 第25部分：元素含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.35-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 35:Determination of tungsten content—Thiocyanate spectrophotometric method 铝及铝合金化学分析方法 第35部分：钨含量的测定 硫氰酸盐分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.36-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 36:Determination of silver content—Flame atomic absorption spectrometry 铝及铝合金化学分析方法 第36部分：银含量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.10-2020 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 10：Determination of chromium content—Ammonium ferrous sulfate titration and inductively coupled plasma atomic emission spectrometry（with vanadium） 海绵钛、钛及钛合金化学分析方法 第10部分：铬量的测定 硫酸亚铁铵滴定法和电感耦合等离子体原子发射光谱法（含钒） |
China National Standards alloys— |
English PDF |
| GB/T 38513-2020 |
Methods for chemical analysis of niobium hafnium alloys—Determination of hafnium,titanium,zirconium,tungsten,tantalum contents—Inductively coupled plasma atomic emission spectrometry 铌铪合金化学分析方法 铪、钛、锆、钨、钽等元素的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 39637-2020 |
Corrosion of metals and alloys—Classification of soil corrosivity 金属和合金的腐蚀 土壤环境腐蚀性分类 |
China National Standards alloys— |
English PDF |
| GB/T 20975.8-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 8：Determination of zinc content 铝及铝合金化学分析方法 第8部分：锌含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.34-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 34：Determination of sodium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第34部分：钠含量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.33-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 33：Determination of potassium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第33部分：钾含量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.32-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 32：Determination of bismuth content 铝及铝合金化学分析方法 第32部分：铋含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.20-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 20：Determination of gallium content—Butyrhodamine B spectrophotometric method 铝及铝合金化学分析方法 第20部分：镓含量的测定 丁基罗丹明B分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.19-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 19：Determination of zirconium content 铝及铝合金化学分析方法 第19部分：锆含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.15-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 15：Determination of boron content 铝及铝合金化学分析方法 第15部分：硼含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.13-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 13：Determination of vanadium content 铝及铝合金化学分析方法 第13部分：钒含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards alloys— |
English PDF |
| GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.7-2019 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 7：Determination of manganese content—Patassium periodate spectrometry and inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第7部分：锰量的测定 高碘酸钾分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.2-2019 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 2：Determination of iron content—1,10-phenanthroline spectrophotometry and inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第2部分：铁量的测定 1,10-二氮杂菲分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.12-2019 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 12：Determination of silicon content—Molybdenum blue spectrophotometry 锆及锆合金化学分析方法 第12部分：硅量的测定 钼蓝分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards alloys— |
English PDF |
| GB/T 37797-2019 |
Precision alloys—Designation 精密合金 牌号 |
China National Standards alloys— |
English PDF |
| GB/T 37623-2019 |
Corrosion of metals and alloys—Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors 金属和合金的腐蚀 核反应堆用锆合金水溶液腐蚀试验 |
China National Standards alloys— |
English PDF |
| GB/T 37619-2019 |
Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.31-2019 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 31：Determination of phosphorus content—Molybdenum blue spectrophotometry 铝及铝合金化学分析方法 第31部分：磷含量的测定 钼蓝分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.30-2019 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 30：Determination of hydrogen content—Heating extraction-thermal conductivity method 铝及铝合金化学分析方法 第30部分：氢含量的测定 加热提取热导法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.29-2019 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 29:Determination of molybdenum content—Thiocyanate spectrophotometry 铝及铝合金化学分析方法 第29部分：钼含量的测定 硫氰酸盐分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.28-2019 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry 铝及铝合金化学分析方法 第28部分：钴含量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.5-2019 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 5：Determination of aluminium content—Chronic azurol-S-tetradrcylpyridine chloride spectrophotometry 锆及锆合金化学分析方法 第5部分：铝量的测定 铬天青S-氯化十四烷基吡啶分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.21-2019 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 21: Determination of manganese, chromium, nickel, aluminum, molybdenum, tin, vanadium, yttrium, copper and zirconium content—Atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第21部分：锰、铬、镍、铝、钼、锡、钒、钇、铜、锆量的测定 原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.17-2019 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 17:Determination of magnesium content—Flame atomic absorption spectrometry 海绵钛、钛及钛合金化学分析方法 第17部分: 镁量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.6-2019 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 6：Determination of copper content—2,9-Dimethyl-1,10-phenanthroline spectrophotometry 锆及锆合金化学分析方法 第6部分：铜量的测定 2,9-二甲基-1,10-二氮杂菲分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 19292.2-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 2: Guiding values for the corrosivity categories 金属和合金的腐蚀 大气腐蚀性 第2部分：腐蚀等级的指导值 |
China National Standards alloys— |
English PDF |
| GB/T 8013.1-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分：阳极氧化膜 |
China National Standards alloys— |
English PDF |
| GB/T 19292.1-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1: Classification, determination and estimation 金属和合金的腐蚀 大气腐蚀性 第1部分：分类、测定和评估 |
China National Standards alloys— |
English PDF |
| GB/T 14986.1-2018 |
Soft magnetic alloys—Part 1：General requirements 软磁合金 第1部分：一般要求 |
China National Standards alloys— |
English PDF |
| GB/T 8013.3-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3: Organic polymer coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分：有机聚合物涂膜 |
China National Standards alloys— |
English PDF |
| GB/T 20975.11-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 11：Determination of lead content 铝及铝合金化学分析方法 第11部分：铅含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 14986.5-2018 |
Soft magnetic alloys—Part 5：Iron-aluminium alloys 软磁合金 第5部分：铁铝合金 |
China National Standards alloys— |
English PDF |
| GB/T 8013.2-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2: Combined coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分:阳极氧化复合膜 |
China National Standards alloys— |
English PDF |
| GB/T 19746-2018 |
Corrosion of metals and alloys—Alternate immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards alloys— |
English PDF |
| GB/T 15970.1-2018 |
Corrosion of metals and alloys—Stress corrosion testing—Part 1: General guidance on testing procedures 金属和合金的腐蚀 应力腐蚀试验 第1部分：试验方法总则 |
China National Standards alloys— |
English PDF |
| GB/T 20975.27-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 27：Determination of cerium,lanthanum,scandium—Inductively coupled plasma atomic emission spectrometry method 铝及铝合金化学分析方法 第27部分：铈、镧、钪含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 19292.4-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 第4部分：用于评估腐蚀性的标准试样的腐蚀速率的测定 |
China National Standards alloys— |
English PDF |
| GB/T 19292.3-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres 金属和合金的腐蚀 大气腐蚀性 第3部分：影响大气腐蚀性环境参数的测量 |
China National Standards alloys— |
English PDF |
| GB/T 36174-2018 |
Corrosion of metals and alloys—Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 金属和合金的腐蚀 固溶热处理铝合金的耐晶间腐蚀性的测定 |
China National Standards alloys— |
English PDF |
| GB/T 14986.3-2018 |
Soft magnetic alloys—Part 3：Iron-cobalt alloys 软磁合金 第3部分：铁钴合金 |
China National Standards alloys— |
English PDF |
| GB/T 14986.4-2018 |
Soft magnetic alloys—Part 4：Iron-chromium alloys 软磁合金 第4部分：铁铬合金 |
China National Standards alloys— |
English PDF |
| GB/T 4103.17-2018 |
Method for chemical analysis of lead and lead alloys—Part 17: Determination of sodium, magnesium contents—Flame atomic absorption spectrometry 铅及铅合金化学分析方法 第17部分：钠量、镁量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 20975.2-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part2: Determination of arsenic content 铝及铝合金化学分析方法 第2部分：砷含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 20975.1-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 1：Determination of mercury content 铝及铝合金化学分析方法 第1部分：汞含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 34471.2-2017 |
Elastic alloys—Part 2: Constant elastic alloys 弹性合金 第2部分：恒弹性合金 |
China National Standards alloys— |
English PDF |
| GB/T 15970.7-2017 |
Corrosion of metals and alloys—Stress corrosion testing—Part 7: Slow strain rate testing 金属和合金的腐蚀 应力腐蚀试验 第7部分: 慢应变速率试验 |
China National Standards alloys— |
English PDF |
| GB/T 19345.1-2017 |
Amorphous and nanocrystalline alloys—Part 1: Fe-based amorphous soft magnetic alloy strips 非晶纳米晶合金 第1部分：铁基非晶软磁合金带材 |
China National Standards alloys— |
English PDF |
| GB/T 4698.27-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 27：Determination of neodymium content—Inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第27部分：钕量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.3-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 3：Determination of silicon content—Molybdenum blue spectrophotometry 海绵钛、钛及钛合金化学分析方法 第3部分：硅量的测定 钼蓝分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.22-2017 |
Methods for chemical analysis of titanium sponge ,titanium and titanium alloys—Part 22：Determination of niobium content—5-Br-PADAP spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第22部分：铌量的测定 5-Br-PADAP分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.28-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 28：Determination of ruthenium content—Inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第28部分：钌量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.1-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 1：Determination of copper content—Flame atomic absorption spectrometry 海绵钛、钛及钛合金化学分析方法 第1部分：铜量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.20-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 4：Determination of manganese content—Potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第4部分：锰量的测定 高碘酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.15-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 15：Determination of boron content—Curcumin spectrophotometry 锆及锆合金化学分析方法 第15部分：硼量的测定 姜黄素分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.19-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 19：Determination of molybdenum content—Thiocyanate-differential spectrophotometry 海绵钛、钛及钛合金化学分析方法 第19部分：钼量的测定 硫氰酸盐示差光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.5-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 5：Determination of molybdenum content—Thiocyanate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第5部分：钼量的测定 硫氰酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.21-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 21：Determination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method 锆及锆合金化学分析方法 第21部分：氢量的测定 惰气熔融红外吸收法/热导法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.8-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 8：Determination of cobalt content—Nitroso-R-salt spectrophotometry 锆及锆合金化学分析方法 第8部分：钴量的测定 亚硝基R盐分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.11-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 11: Determination of molybdenum content—Thiocyanate spectrophotometry 锆及锆合金化学分析方法 第11部分：钼量的测定 硫氰酸盐分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 34630.1-2017 |
Friction stir welding—Aluminium and its alloys—Part 1：Terminology and definition 搅拌摩擦焊 铝及铝合金 第1部分：术语及定义 |
China National Standards alloys— |
English PDF |
| GB/T 4698.8-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 8：Determination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第8部分：铝量的测定 碱分离-EDTA络合滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.13-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 13: Determination of lead content—Polarography 锆及锆合金化学分析方法 第13部分：铅量的测定 极谱法 |
China National Standards alloys— |
English PDF |
| GB/T 34630.5-2017 |
Friction stir welding—Aluminium and its alloys—Part 5：Quality and inspection requirements 搅拌摩擦焊 铝及铝合金 第5部分：质量与检验要求 |
China National Standards alloys— |
English PDF |
| GB/T 34630.3-2017 |
Friction stir welding—Aluminium and its alloys—Part 3：Qualification of welding operators 搅拌摩擦焊 铝及铝合金 第3部分：焊接操作工的技能评定 |
China National Standards alloys— |
English PDF |
| GB/T 34630.4-2017 |
Friction stir welding—Aluminium and its alloys—Part 4：Specification and qualification of welding procedures 搅拌摩擦焊 铝及铝合金 第4部分：焊接工艺规程及评定 |
China National Standards alloys— |
English PDF |
| GB/T 4698.18-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 18：Determination of tin content—Flame atomic absorption spectrometry 海绵钛、钛及钛合金化学分析方法 第18部分：锡量的测定 火焰原子吸收光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.24-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 24：Determination of nickel content—Dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第24部分：镍量的测定 丁二酮肟分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.9-2017 |
Methods for chemical analysis of titanium sponge,titanium and titanium alloys—Part 9：Determination of tin content—Potassium iodate titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第9部分：锡量的测定 碘酸钾滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 34630.2-2017 |
Friction stir welding—Aluminium and its alloys—Part 2：Design of weld joints 搅拌摩擦焊 铝及铝合金 第2部分：焊接接头设计 |
China National Standards alloys— |
English PDF |
| GB/T 13747.14-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 14：Determination of uranium content—Polarography 锆及锆合金化学分析方法 第14部分：铀量的测定 极谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.19-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part19：Determination of titanium content—Diantipyrylmethane spectrophotometry and the inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第19部分：钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.16-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 16：Determination of chloric content—Silver chloride nephelometry and ion selective electrode method 锆及锆合金化学分析方法 第16部分：氯量的测定 氯化银浊度法和离子选择性电极法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.25-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 25：Determination of niobium content—2-(5-bromo-2-pyridylazo)-5-diethylam inophenol spectrophotometry and inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第25部分：铌量的测定 5-Br-PADAP分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.17-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 17：Determination of cadmium content—Polarography 锆及锆合金化学分析方法 第17部分：镉量的测定 极谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.22-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 22：Determination of oxygen and nitrogen contents—Inert gas fusion-infrared absorption and thermal conductivity method 锆及锆合金化学分析方法 第22部分：氧量和氮量的测定 惰气熔融红外吸收法/热导法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.24-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion 锆及锆合金化学分析方法 第24部分：碳量的测定 高频燃烧红外吸收法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.1-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 1：Determination of tin content—Potassium iodate titration and phenylfluorone-polyethylene glycoloctyl phenyl ether spectrophotometry 锆及锆合金化学分析方法 第1部分：锡量的测定 碘酸钾滴定法和苯基荧光酮-聚乙二醇辛基苯基醚分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.23-2017 |
Methods for chemical analysis of titanium sponge，titanium and titanium alloys—Part 23：Determination of palladium content—Stannous choride-potassium iodide spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第23部分：钯量的测定 氯化亚锡-碘化钾分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.13-2017 |
Methods for chemical analysis of titanium sponge,titanium and titanium alloys—Part 13：Determination of zirconium content—EDTA complexometric titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第13部分：锆量的测定 EDTA络合滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.25-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 25：Determination of chlorine content—Silver chlorin spectrophotometry 海绵钛、钛及钛合金化学分析方法 第25部分：氯量的测定 氯化银分光光度法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.12-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 12：Determination of vanadium content—Ammonium ferrous sulfate titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第12部分：钒量的测定 硫酸亚铁铵滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 13747.20-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 20：Determination of hafnium content—Inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第20部分：铪量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 34203-2017 |
Corrosion of metals and alloys—Air pollutant monitoring and analysis methods 金属和合金的腐蚀 大气污染物的采集与分析方法 |
China National Standards alloys— |
English PDF |
| GB/T 19346.2-2017 |
Methods of measurement for amorphous and nanocrystalline alloys—Part 2: Lamination factor of amorphous alloy strips 非晶纳米晶合金测试方法 第2部分：带材叠片系数 |
China National Standards alloys— |
English PDF |
| GB/T 33883-2017 |
Test methods for stress corrosion of 7XXX series aluminium alloys—Boiling sodium chloride solution method 7XXX系铝合金应力腐蚀试验 沸腾氯化钠溶液法 |
China National Standards alloys— |
English PDF |
| GB/T 8753.1-2017 |
Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1：Measurement of the loss of mass after immersion in acid solution(s) 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分：酸浸蚀失重法 |
China National Standards alloys— |
English PDF |
| GB/T 4698.4-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 4：Determination of manganese content—Potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第4部分：锰量的测定 高碘酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards alloys— |
English PDF |
| GB/T 33214-2016 |
Laser-arc hybrid welding joints of steels, nickel and nickel alloys—Quality levels for imperfections 钢、镍及镍合金的激光-电弧复合焊接接头 缺欠质量分级指南 |
China National Standards alloys— |
English PDF |
| GB/T 15260-2016 |
Corrosion of metals and alloys—Test methods for intergranular corrosion of nickel alloys 金属和合金的腐蚀 镍合金晶间腐蚀试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 32571-2016 |
Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 32550-2016 |
Corrosion of metals and alloys—Determination of the critical pitting temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 |
China National Standards alloys— |
English PDF |
| GB/T 17897-2016 |
Corrosion of metals and alloys—Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 32286.1-2015 |
Soft magnetic alloys—Part 1：Nickel-iron alloys 软磁合金 第1部分：铁镍合金 |
China National Standards alloys— |
English PDF |
| GB/T 31935-2015 |
Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of low-Cr ferritic stainless steels 金属和合金的腐蚀 低铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 16545-2015 |
Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 |
China National Standards alloys— |
English PDF |
| GB/T 5121.29-2015 |
Methods for chemical analysis of copper and copper alloys—Part 29: Determination of aluminium oxide content 铜及铜合金化学分析方法 第29部分：三氧化二铝含量的测定 |
China National Standards alloys— |
English PDF |
| GB/T 11886-2015 |
Silver jewellery alloys—Determination of sliver—Volhard method 银合金首饰 银含量的测定 伏尔哈特法 |
China National Standards alloys— |
English PDF |
| GB/T 31317-2014 |
Corrosion of metals and alloys—Black box exposure test method 金属和合金的腐蚀 黑箱暴露试验方法 |
China National Standards alloys— |
English PDF |
| GB/T 12689.12-2004 |
The methods for chemical analysis of zinc and zinc alloys—The determination of lead, cadmium, iron, copper, tin, aluminium, arsenic, stibium, magnesium lanthanum and cerium contents—The inductively coupled plasma-optical emission spectrometric method 锌及锌合金化学分析方法 铅、镉、铁、铜、锡、铝、砷、锑、镁、镧、铈量的测定 电感耦合等离子体--发射光谱法 |
China National Standards alloys— |
English PDF |
| Find out:147Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
