Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43457-2023 |
Preparation and installation requirements for space science experiment samples before launch {译} 空间科学实验样品发射前准备与安装要求 |
China National Standards before |
 English PDF |
| GB/T 6138-2023 |
Step twist drill for drilling before tapping {译} 攻丝前钻孔用阶梯麻花钻 |
China National Standards before |
English PDF |
| GB/T 41584-2022 |
Requirements for thermal state performance test before fuel loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前热态性能试验要求 |
China National Standards before |
English PDF |
| GB/T 41587-2022 |
Requirements for cold-state performance test before fuel loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前冷态性能试验要求 |
China National Standards before |
English PDF |
| GB/T 17850.9-2021 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards before |
English PDF |
| GB/T 40630-2021 |
Technical requirements for wood incising before preservative treatment 木材刻痕防腐处理技术要求 |
China National Standards before |
English PDF |
| GB/T 17850.4-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分：煤炉渣 |
China National Standards before |
English PDF |
| GB/T 17850.1-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类 |
China National Standards before |
English PDF |
| GB/T 18838.2-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂 |
China National Standards before |
English PDF |
| GB/T 17850.5-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣 |
China National Standards before |
English PDF |
| GB/T 17850.7-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝 |
China National Standards before |
English PDF |
| GB/T 18838.5-2015 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸 |
China National Standards before |
English PDF |
| GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards before |
English PDF |
| GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards before |
English PDF |
| GB/T 28806-2012 |
Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service 轨道交通 机车车辆 机车车辆制成后投入使用前的试验 |
China National Standards before |
English PDF |
| GB/T 8923.1-2011 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分：未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级 |
China National Standards before |
English PDF |
| GB/T 18570.6-2011 |
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 |
China National Standards before |
English PDF |
| GB/T 17850.6-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 |
China National Standards before |
English PDF |
| GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards before |
English PDF |
| GB/T 17850.11-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分：钢渣特种型砂 |
China National Standards before |
English PDF |
| GB/T 8923.3-2009 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds,edges and other areas with surface imperfections 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第3部分：焊缝、边缘和其他区域的表面缺陷的处理等级 |
China National Standards before |
English PDF |
| GB/T 18570.2-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分：清理过的表面上氯化物的实验室测定 |
China National Standards before |
English PDF |
| GB/T 18570.11-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法 |
China National Standards before |
English PDF |
| GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法 |
China National Standards before |
English PDF |
| GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards before |
English PDF |
| GB/T 3903.21-2008 |
Footwear - Test methods for accessories:Touch and close fasteners - Shear strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剪切强度 |
China National Standards before |
English PDF |
| GB/T 3903.20-2008 |
Footwear - Test methods for accessories:Touch and close fasteners - Peel strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剥离强度 |
China National Standards before |
English PDF |
| GB/T 8923.2-2008 |
Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel substrates after localized removal of previous coatings 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第2部分: 已涂覆过的钢材表面局部清除原有涂层后的处理等级 |
China National Standards before |
English PDF |
| GB/T 18838.4-2008 |
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸 |
China National Standards before |
English PDF |
| GB/T 18838.3-2008 |
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂 |
China National Standards before |
English PDF |
| GB/T 18570.12-2008 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法 |
China National Standards before |
English PDF |
| GB/T 13288.1-2008 |
Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards before |
English PDF |
| GB/T 3318-2006 |
Test methods for electric locomotives on completion of construction and before entry into service 电力机车制成后投入使用前的试验方法 |
China National Standards before |
English PDF |
| GB/T 3315-2006 |
Test methods for diesel locomotives on completion of construction and before entry into service 内燃机车制成后投入使用前的试验方法 |
China National Standards before |
English PDF |
| GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards before |
English PDF |
| GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards before |
English PDF |
| GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards before |
English PDF |
| GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法 |
China National Standards before |
English PDF |
| GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法 |
China National Standards before |
English PDF |
| GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards before |
English PDF |
| GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards before |
English PDF |
| GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法 |
China National Standards before |
English PDF |
| GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards before |
English PDF |
| GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards before |
English PDF |
| GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards before |
English PDF |
| GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards before |
English PDF |
| GB/T 18839.3-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理 |
China National Standards before |
English PDF |
| GB/T 18839.2-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理 |
China National Standards before |
English PDF |
| GB/T 18839.1-2002 |
Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles 涂覆涂料前钢材表面处理 表面处理方法 总则 |
China National Standards before |
English PDF |
| GB/T 18838.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类 |
China National Standards before |
English PDF |
| GB/T 17850.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类 |
China National Standards before |
English PDF |
| GB/T 6807-2001 |
Specifications for phosphating treatment of iron and steel parts before painting 钢铁工件涂装前磷化处理技术条件 |
China National Standards before |
English PDF |
| GB/T 18570.4-2001 |
Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application 涂覆涂料前钢材表面处理 表面清洁度的评定试验 涂覆涂料前凝露可能性的评定导则 |
China National Standards before |
English PDF |
| GB/T 17850.3-1999 |
Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 铜精炼渣 |
China National Standards before |
English PDF |
| GB/T 17849-1999 |
Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法 |
China National Standards before |
English PDF |
| Find out:55Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
