Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 14048.24-2024 |
Low-voltage switchgear and control equipment - Part 7-5: Auxiliary devices - Terminal blocks for aluminum conductors {译} 低压开关设备和控制设备-第7-5部分：辅助器件-铝导体的接线端子排 |
China National Standards block |
 English PDF |
| GB/T 43582-2023 |
blockchain and Distributed Accounting Technology Application Programming Interface Middleware Technology Guide {译} 区块链和分布式记账技术 应用程序接口 中间件技术指南 |
China National Standards block |
English PDF |
| GB/T 43580-2023 |
blockchain and Distributed Accounting Technology General Service Guide for Certificate Deposits {译} 区块链和分布式记账技术 存证通用服务指南 |
China National Standards block |
English PDF |
| GB/T 43579-2023 |
blockchain and distributed accounting technology Smart contract life cycle management technical specifications {译} 区块链和分布式记账技术 智能合约生命周期管理技术规范 |
China National Standards block |
English PDF |
| GB/T 43575-2023 |
blockchain and distributed accounting technology system testing specifications {译} 区块链和分布式记账技术 系统测试规范 |
China National Standards block |
English PDF |
| GB/T 43572-2023 |
blockchain and Distributed Ledger Technology Terminology {译} 区块链和分布式记账技术 术语 |
China National Standards block |
English PDF |
| GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: Calibration of standard hardness blocks {译} 金属材料 巴氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 42907-2023 |
Testing of non-equilibrium carrier recombination lifetime in silicon ingots, silicon blocks and silicon wafers Non-contact eddy current induction method {译} 硅锭、硅块和硅片中非平衡载流子复合寿命的测试 非接触涡流感应法 |
China National Standards block |
English PDF |
| GB/T 42570-2023 |
Information Security Technology blockchain Technology Security Framework {译} 信息安全技术 区块链技术安全框架 |
China National Standards block |
English PDF |
| GB/T 42571-2023 |
Information Security Technology blockchain Information Service Security Specifications {译} 信息安全技术 区块链信息服务安全规范 |
China National Standards block |
English PDF |
| GB/T 42752-2023 |
blockchain and Distributed Ledger Technology Reference Architecture {译} 区块链和分布式记账技术 参考架构 |
China National Standards block |
English PDF |
| GB/T 17394.3-2022 |
Metallic materials - Leeb hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 230.3-2022 |
Metallic materials - Rockwell hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 洛氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 21838.3-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks {译} 金属材料 硬度和材料参数的仪器化压入试验 第3部分：标准块的标定 |
China National Standards block |
English PDF |
| GB/T 231.3-2022 |
Metallic materials - Brinell hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 34722-2017 |
Impregnated film paper veneer plywood and blockboard "No. 1 Amendment" {译} 浸渍胶膜纸饰面胶合板和细木工板《第1号修改单》 |
China National Standards block |
English PDF |
| GB/T 19769.4-2022 |
Function blocks - Part 4: Rules for consistent line rules {译} 功能块 第4部分：一致性行规的规则 |
China National Standards block |
English PDF |
| GB/T 19769.2-2022 |
Function blocks - Part 2: requirements for software tools {译} 功能块 第2部分：软件工具要求 |
China National Standards block |
English PDF |
| GB/T 19769.1-2022 |
Function block part 1: structure {译} 功能块 第1部分：结构 |
China National Standards block |
English PDF |
| GB/T 41503-2022 |
Preparation of refractory sprayed material test block with amorphous refractory pneumatic nozzle and mixed spray gun {译} 不定形耐火材料 气动喷嘴混合型喷枪制备耐火喷射料试块 |
China National Standards block |
English PDF |
| GB/T 14048.22-2022 |
Low-voltage switchgear and controlgear - Part 7-4: Auxiliary devices - PCB terminal blocks for copper conductors {译} 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards block |
English PDF |
| GB/T 28826.4-2022 |
Information technology - Common biometric interchange format framework - Part 4: Security block format specification {译} 信息技术 公用生物特征识别交换格式框架 第4部分：安全块格式规范 |
China National Standards block |
English PDF |
| GB/T 4678.15-2021 |
Die casting dies—Components—Part 15: Spacer blocks 压铸模 零件 第15部分：垫块 |
China National Standards block |
English PDF |
| GB/T 37162.3-2021 |
Hydraulic fluid power-Monitoring the level of particulate contamination of the fluid-Part 3:Use of the filter blockage technique 液压传动 液体颗粒污染度的监测 第3部分：利用滤膜阻塞技术 |
China National Standards block |
English PDF |
| GB/T 39992-2021 |
Sensory analysis—Methodology—Balanced incomplete block designs 感官分析 方法学 平衡不完全区组设计 |
China National Standards block |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards block |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards block |
English PDF |
| GB/T 41114-2021 |
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards block |
English PDF |
| GB/T 17964-2021 |
Information security technology—Modes of operation for a block cipher 信息安全技术 分组密码算法的工作模式 |
China National Standards block |
English PDF |
| GB/T 11968-2020 |
Autoclaved aerated concrete blocks 蒸压加气混凝土砌块 |
China National Standards block |
English PDF |
| GB/T 39036-2020 |
Integrity requirements of block fabrication for ship 船舶分段制造完整性要求 |
China National Standards block |
English PDF |
| GB/T 38752-2020 |
Difficult-flammable blockboard 难燃细木工板 |
China National Standards block |
English PDF |
| GB/T 15852.1-2020 |
Information technology—Security techniques—Message authentication codes—Part 1: Mechanisms using a block cipher 信息技术 安全技术 消息鉴别码 第1部分：采用分组密码的机制 |
China National Standards block |
English PDF |
| GB/T 39432-2020 |
Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block 无损检测 超声检测 阶梯试块 |
China National Standards block |
English PDF |
| GB/T 18852-2020 |
Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams 无损检测 超声检测 测量接触探头声束特性的参考试块和方法 |
China National Standards block |
English PDF |
| GB/T 37981-2019 |
Analysis techniques for dependability—Reliability block diagram and boolean methods 可信性分析技术 可靠性框图法和布尔代数法 |
China National Standards block |
English PDF |
| GB/T 37737-2019 |
Information technology—Cloud computing—General technique requirements of distributed block storage system 信息技术 云计算 分布式块存储系统总体技术要求 |
China National Standards block |
English PDF |
| GB/T 37751.1-2019 |
Residual current operated circuit-breakers for household and similar use—Part 1: Outline of blocks and modules for residual current devices standard 家用和类似用途的剩余电流动作断路器 第1部分：剩余电流电器标准的独立模块和单元模块概述 |
China National Standards block |
English PDF |
| GB/Z 21099.6-2018 |
Function blocks(FB) for process control and electronic device description language(EDDL)—Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices 过程控制用功能块（FB）和电子设备描述语言（EDDL） 第6部分：满足现场设备工程工具对集成现场总线设备的需求 |
China National Standards block |
English PDF |
| GB/T 21099.3-2018 |
Function block(FB) for process control—Part 3: Electronic device description language(EDDL) 过程控制用功能块(FB) 第3部分：电子设备描述语言(EDDL) |
China National Standards block |
English PDF |
| GB/T 36515-2018 |
Concrete product machinery—Safety requirements for block making machines 混凝土制品机械 砌块成型机安全要求 |
China National Standards block |
English PDF |
| GB/T 36535-2018 |
Autoclaved fly ash hollow bricks and blocks 蒸压粉煤灰空心砖和空心砌块 |
China National Standards block |
English PDF |
| GB/T 36534-2018 |
Foamed concrete blocks filled with ceramsite 陶粒发泡混凝土砌块 |
China National Standards block |
English PDF |
| GB/T 7813-2018 |
Rolling bearings－Split type plummer block housings－Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards block |
English PDF |
| GB/T 35910-2018 |
blocking enzyme-linked immunosorbent assay for detecting the antibody to porcine circovirus type 2 猪圆环病毒2型阻断ELISA抗体检测方法 |
China National Standards block |
English PDF |
| GB/T 34633.1-2017 |
Plain bearings—Pedestal plain bearings—Part 1: Pillow blocks 滑动轴承 壳体支撑滑动轴承 第1部分：座式滑动轴承 |
China National Standards block |
English PDF |
| GB/T 34729-2017 |
blocking ELISA method to detect antibody against classical swine fever virus 猪瘟病毒阻断ELISA抗体检测方法 |
China National Standards block |
English PDF |
| GB/T 34722-2017 |
Surface decorated plywood and blockboard with paper impregnated thermosetting resins 浸渍胶膜纸饰面胶合板和细木工板 |
China National Standards block |
English PDF |
| GB/T 34363-2017 |
Non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards block |
English PDF |
| GB/T 34151-2017 |
Stamping dies—Guide plates—U-and V-blocks 冲模 导板 U形和V形块 |
China National Standards block |
English PDF |
| GB/T 34011-2017 |
Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam block test) 建筑用绝热制品 外墙外保温系统抗拉脱性能的测定（泡沫块试验） |
China National Standards block |
English PDF |
| GB/T 14048.22-2017 |
Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards block |
English PDF |
| GB/T 4341.3-2016 |
Metallic materials—Shore hardness test—Part 3: Calibration of reference blocks 金属材料 肖氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 5849-2016 |
blockboards and battenboards 细木工板 |
China National Standards block |
English PDF |
| GB/T 32851-2016 |
Requirements on air cargo transport services of space blocked and aircraft ULD （container and pallet）chartered for international freight forwarders 国际货运代理包舱、包航空集装器（集装箱、集装板）运输服务质量要求 |
China National Standards block |
English PDF |
| GB/T 32907-2016 |
Information security technology—SM4 block cipher algorthm 信息安全技术 SM4分组密码算法 |
China National Standards block |
English PDF |
| GB/T 32660.3-2016 |
Metallic materials—Webster hardness test—Part 3: Calibration of reference blocks 金属材料 韦氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 14048.8-2016 |
Low-voltage switchgear and controlgear—Part 7-2: Ancillary equipment—Protective conductor terminal blocks for copper conductors 低压开关设备和控制设备 第7-2部分：辅助器件 铜导体的保护导体接线端子排 |
China National Standards block |
English PDF |
| GB/T 14048.7-2016 |
Low-voltage switchgear and controlgear—Part 7-1：Ancillary equipment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards block |
English PDF |
| GB/T 14048.18-2016 |
Low-voltage switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards block |
English PDF |
| GB/T 21099.2-2015 |
Function blocks(FB) for process control—Part 2: Specification of FB concept 过程控制用功能块（FB） 第2部分：功能块概念规范 |
China National Standards block |
English PDF |
| GB/T 19769.4-2015 |
Function block—Part 4: Rules for compliance profiles 功能块 第4部分：一致性行规指南 |
China National Standards block |
English PDF |
| GB/T 19769.2-2015 |
Function blocks—Part 2: Software tools requirements 功能块 第2部分：软件工具要求 |
China National Standards block |
English PDF |
| GB/T 19769.1-2015 |
Function blocks—Part 1: Architecture 功能块 第1部分：结构 |
China National Standards block |
English PDF |
| GB/T 26643.3-2015 |
Non-destructive testing—Infrared flash thermography—Part 3: blocks 无损检测 闪光灯激励红外热像法 第3部分：试块 |
China National Standards block |
English PDF |
| GB/T 19799.1-2015 |
Non-destructive testing—Ultrasonic testing—Specification for calibration block No. 1 无损检测 超声检测 1号校准试块 |
China National Standards block |
English PDF |
| GB/T 11259-2015 |
Non-destructive testing—Practice for fabrication and control of steel reference blocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作和控制方法 |
China National Standards block |
English PDF |
| GB 25324-2014 |
The norm of energy consumption for cathode carbon block for aluminium eletrolyzation 铝电解用石墨质阴极炭块单位产品能源消耗限额 |
China National Standards block |
English PDF |
| GB/T 13545-2014 |
Fired hollow bricks and blocks 烧结空心砖和空心砌块 |
China National Standards block |
English PDF |
| GB/T 8239-2014 |
Normal concrete small block 普通混凝土小型砌块 |
China National Standards block |
English PDF |
| GB/T 4111-2013 |
Test methods for the concrete block & brick 混凝土砌块和砖试验方法 |
China National Standards block |
English PDF |
| GB/T 29062-2012 |
Autoclaved foam concrete bricks and blocks 蒸压泡沫混凝土砖和砌块 |
China National Standards block |
English PDF |
| GB/T 29060-2012 |
The bricks & blocks composited insulation materials 复合保温砖和复合保温砌块 |
China National Standards block |
English PDF |
| GB/T 4340.3-2012 |
Metallic materials - Vickers hardness test - Part 3：Calibration of reference blocks 金属材料 维氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 231.3-2012 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 230.3-2012 |
Metallic materials - Rockwell hardness test - Part 3：Calibration of reference blocks(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第3部分：标准硬度块（A、B、C、D、E、F、G、H、K、N、T标尺）的标定 |
China National Standards block |
English PDF |
| GB/T 18449.3-2012 |
Metallic materials - Knoop hardness test - Part 3：Calibration of reference blocks 金属材料 努氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 17394.3-2012 |
Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards block |
English PDF |
| GB/T 19799.2-2012 |
Non-destructive testing - Ultrasonic testing - Specification for calibration block No.2 无损检测 超声检测 2号校准试块 |
China National Standards block |
English PDF |
| GB/T 19769.3-2012 |
Function block for industrial-process measurement and control systems - Part 3：Tutorial information 工业过程测量和控制系统用功能块 第3部分：指导信息 |
China National Standards block |
English PDF |
| GB/T 15229-2011 |
Lightweight aggregate concrete small hollow block 轻集料混凝土小型空心砌块 |
China National Standards block |
English PDF |
| GB/T 27561-2011 |
Styrene-butadiene-styrene block copolymers（SBS）adhesives 苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）胶粘剂 |
China National Standards block |
English PDF |
| GB/T 26796.4-2011 |
EPA specification for use in industrial measurement and control system - Part 4: Function block technical specification 用于工业测量与控制系统的EPA规范 第4部分：功能块的技术规范 |
China National Standards block |
English PDF |
| GB 26538-2011 |
Fired heat preservation brick and block 烧结保温砖和保温砌块 |
China National Standards block |
English PDF |
| GB 13544-2011 |
Fired perforated bricks and block 烧结多孔砖和多孔砌块 |
China National Standards block |
English PDF |
| GB/T 5559-2010 |
Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block copolymers - Determination of cloud point 环氧乙烷型及环氧乙烷-环氧丙烷嵌段聚合型非离子表面活性剂 浊点的测定 |
China National Standards block |
English PDF |
| GB/T 3849.2-2010 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks 硬质合金 洛氏硬度试验（A标尺） 第2部分：标准试块的制备和校准 |
China National Standards block |
English PDF |
| GB/T 26297.1-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 1: Cathode blocks 铝用炭素材料取样方法 第1部分：底部炭块 |
China National Standards block |
English PDF |
| GB/T 26295-2010 |
Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method 铝电解用炭素材料 预焙阳极和阴极炭块 四点法测定抗折强度 |
China National Standards block |
English PDF |
| GB/T 26297.3-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 3: Prebaked blocks 铝用炭素材料取样方法 第3部分：预焙阳极 |
China National Standards block |
English PDF |
| GB/T 26297.2-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 2: Sidewall blocks 铝用炭素材料取样方法 第2部分：侧部炭块 |
China National Standards block |
English PDF |
| GB/T 21099.4-2010 |
Function blocks (FB) for process control - Part 4：EDD interoperability guideline 过程控制用功能块(FB) 第4部分：EDD互操作指南 |
China National Standards block |
English PDF |
| GB/T 21099.3-2010 |
Function block (FB) for process control - Part 3：Electronic device description language (EDDL) 过程控制用功能块(FB) 第3部分：电子设备描述语言(EDDL) |
China National Standards block |
English PDF |
| GB/T 25457-2010 |
Piano pin block 钢琴弦轴板 |
China National Standards block |
English PDF |
| GB/T 24975.7-2010 |
Guide of environmental design for low-voltage apparatus - Part 7: Terminal blocks 低压电器环境设计导则 第7部分：接线端子 |
China National Standards block |
English PDF |
| GB/T 24763-2009 |
Steel slag for foamed concrete blocks 泡沫混凝土砌块用钢渣 |
China National Standards block |
English PDF |
| GB/T 23982-2009 |
Test method for block resistance of wood coatings 木器涂料抗粘连性测定法 |
China National Standards block |
English PDF |
| GB/T 23911-2009 |
Non-destructive testing - blocks for penetrant testing 无损检测 渗透检测用试块 |
China National Standards block |
English PDF |
| GB/T 23905-2009 |
Non-destructive testing - blocks for ultrasonic testing 无损检测 超声检测用试块 |
China National Standards block |
English PDF |
| GB/T 15566.10-2009 |
Guidance system for public information - Setting principles and requirements - Part 10: Street blocks 公共信息导向系统 设置原则与要求 第10部分：街区 |
China National Standards block |
English PDF |
| GB/T 14395-2009 |
Coding rules for urban geographical features - City roads, road intersections, blocks and municipal pipe lines 城市地理要素编码规则 城市道路、道路交叉口、街坊、市政工程管线 |
China National Standards block |
English PDF |
| GB/T 23561.3-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock 煤和岩石物理力学性质测定方法 第3部分：煤和岩石块体密度测定方法 |
China National Standards block |
English PDF |
| GB/T 13217.8-2009 |
Test method for blocking resistance of liquid ink 液体油墨抗粘连检验方法 |
China National Standards block |
English PDF |
| GB/T 14048.18-2008 |
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards block |
English PDF |
| GB/T 22521-2008 |
Angle block gauge 角度量块 |
China National Standards block |
English PDF |
| GB/T 16712-2008 |
Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks 同步数字体系（SDH）设备功能块特性 |
China National Standards block |
English PDF |
| GB/T 18851.3-2008 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks 无损检测 渗透检测 第3部分：参考试块 |
China National Standards block |
English PDF |
| GB/T 11259-2008 |
Non-destructive testing - Practice for fabrication and control of steel reference blocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作与检验方法 |
China National Standards block |
English PDF |
| GB/T 8533-2008 |
Small block machine 小型砌块成型机 |
China National Standards block |
English PDF |
| GB/T 15852.1-2008 |
Information technology - Security techniques - Message Authentication Codes(MACs) - Part 1: Mechanisms using a block cipher 信息技术 安全技术 消息鉴别码 第1部分：采用分组密码的机制 |
China National Standards block |
English PDF |
| GB/T 10609.1-2008 |
Technical drawings - Title blocks 技术制图 标题栏 |
China National Standards block |
English PDF |
| GB/T 17964-2008 |
Information technology - Security Techniques - Modes of operation for a block cipher 信息安全技术 分组密码算法的工作模式 |
China National Standards block |
English PDF |
| GB/T 21838.3-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards block |
English PDF |
| GB/T 3612-2008 |
Cemented carbide blanks for gauge blocks or measuring tools 量规、量具用硬质合金毛坯 |
China National Standards block |
English PDF |
| GB/T 11880-2008 |
Specification of large die-blocks used for die-forging hammer and mechanical forging press 模锻锤和大型机械锻压机用模块技术条件 |
China National Standards block |
English PDF |
| GB/T 14385-2008 |
Woodworking machines - Thickness planing machines with rotary cutterblock for one-side dressing - Nomenclature and acceptance conditions 木工机床 单面压刨床 术语和精度 |
China National Standards block |
English PDF |
| GB/T 13569-2008 |
Woodworking machines - Surface planing machines with cutterblock for one-side dressing - Nomenclature and acceptance conditions 木工机床 平刨床 术语和精度 |
China National Standards block |
English PDF |
| GB/T 7813-2008 |
Rolling bearings - Split type plummer block housings - Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards block |
English PDF |
| GB/T 21099.2-2007 |
Function blocks for process control - Part 2：Specification of FB concept and electronic device description language 过程控制用功能块 第2部分：功能块概念及电子设备描述语言的规范 |
China National Standards block |
English PDF |
| GB/T 21099.1-2007 |
Function blocks for process control - Part 1: Overview of system aspects 过程控制用功能块 第1部分：系统方面的总论 |
China National Standards block |
English PDF |
| GB/T 19769.4-2007 |
Function blocks for industrial-process measurement and control system - Part 4: Rules for compliance profiles 工业过程测量和控制系统用功能块 第4部分：一致性行规指南 |
China National Standards block |
English PDF |
| GB/T 4169.6-2006 |
Components of injection moulds for plastics - Part 6: Spacer block 塑料注射模零件 第6部分：垫块 |
China National Standards block |
English PDF |
| GB/T 14048.8-2006 |
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors 低压开关设备和控制设备 第7-2部分：辅助器件 铜导体的保护导体接线端子排 |
China National Standards block |
English PDF |
| GB/T 14048.7-2006 |
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards block |
English PDF |
| GB/T 12444-2006 |
Metallic materials - Wear test method - block-on-ring sliding wear test 金属材料 磨损试验方法 试环-试块滑动磨损试验 |
China National Standards block |
English PDF |
| GB/T 20427-2006 |
Height setting micrometers and riser blocks 可调高度测微仪及其垫高块 |
China National Standards block |
English PDF |
| GB/T 5849-2006 |
blockboard 细木工板 |
China National Standards block |
English PDF |
| GB/T 20187-2006 |
Characteristics of optical transport network hierarchy equipment functional blocks 光传送网体系设备的功能块特性 |
China National Standards block |
English PDF |
| GB/T 15208.2-2006 |
Micro-dose X-ray security inspection system - Part 2: Test block 微剂量X射线安全检查设备 第2部分：测试体 |
China National Standards block |
English PDF |
| GB 11968-2006 |
Autoclaved aerated concrete blocks 蒸压加气混凝土砌块 |
China National Standards block |
English PDF |
| GB/T 19799.1-2005 |
Non-destructive testing-Ultrasonic testing-Calibration block No.1 无损检测 超声检测 1 号校准试块 |
China National Standards block |
English PDF |
| GB/T 19769.2-2005 |
Function blocks for industrial-process measurement and control system--Part2:Software tools requirements 工业过程测量和控制系统用功能块 第2部分:软件工具要求 |
China National Standards block |
English PDF |
| GB/T 19769.1-2005 |
Function blocks for industrial-process measurement and control system--Part1:Architecture 工业过程测量和控制系统用功能块 第1部分:结构 |
China National Standards block |
English PDF |
| GB/T 13151-2005 |
Semiconductor devices Discrete devices Part 6:Thyristors Section Three-Blank detail specification for reverse blocking triode thyristors,ambient and case-rated,for currents greater than 100A 半导体器件 分立器件 第6部分:晶闸管 第3篇 电流大于 100A、环境和管壳额定的反向阻断三极晶闸管空白详细规范 |
China National Standards block |
English PDF |
| GB/T 4678.3-2003 |
Die-casting die components--Part 3: Rectangular insert block 压铸模零件 第3部分:矩形镶块 |
China National Standards block |
English PDF |
| GB/T 4678.2-2003 |
Die-casting die components--Part 2: Round insert block 压铸模零件 第2部分: 圆形镶块 |
China National Standards block |
English PDF |
| GB/T 4678.15-2003 |
Die-casting die components--Part 15: Spacer block 压铸模零件 第15部分:垫块 |
China National Standards block |
English PDF |
| GB/T 18852-2002 |
Ultrasonic non-destructive testing--Reference blocks and test procedures for thc characterization of contact search unit beam profiles 无损检测 超声检验 测量接触探头声束特性的参考试块和方法 |
China National Standards block |
English PDF |
| GB/T 18238.2-2002 |
Information technology--Security techniques--Hash-functions--Part 2:Hash-functions using an n-bit block cipher 信息技术 安全技术 散列函数 第2部分:采用n位块密码的散列函数 |
China National Standards block |
English PDF |
| GB/T 6093-2001 |
Geometrical product specifications(GPS)--Length standards--Gauge blocks 几何量技术规范(GPS) 长度标准 量块 |
China National Standards block |
English PDF |
| GB/T 17636-1998 |
Geotextiles and geotextile-related products--Determination of abrasion resistance--Sand paper/slidingblock method 土工布及其有关产品 抗磨损性的测定 砂布/滑块法 |
China National Standards block |
English PDF |
| GB/T 6352-1998 |
Semiconductor devices--Discrete devices--Part 6:Thyristors--Section One:Blank detail specification for reverse blocking triode thyristors，ambient or case-rated，up to 100A 半导体器件 分立器件 第6部分:闸流晶体管 第一篇 100A以下环境或管壳额定反向阻断三极闸流晶体管空白详细规范 |
China National Standards block |
English PDF |
| GB/T 16276-1996 |
Test method for blocking of plastic film 塑料薄膜粘连性试验方法 |
China National Standards block |
English PDF |
| GB/T 13823.12-1995 |
Methods for the calibration of vibration and shock pick-ups--Resonance frequencytesting of undamped accelerometers on a steel block 振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试 |
China National Standards block |
English PDF |
| GB/T 14361.2-1993 |
Ship’s blocks for fibre ropes--Iron shell blocks 船用纤维索滑车 铁壳滑车 |
China National Standards block |
English PDF |
| GB/T 14361.1-1993 |
Ship’s blocks for fibre ropes--Wooden shell blocks 船用纤维索滑车 木壳滑车 |
China National Standards block |
English PDF |
| GB/T 12436-1990 |
Explosive--Determination of power--Lead block method 炸药作功能力试验 铅铸法 |
China National Standards block |
English PDF |
| Find out:147Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
