Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44157-2024 |
Requirements for treatment and disposal of waste circuit boards {译} 废电路板处理处置要求 |
China National Standards boards |
 English PDF |
| GB/T 29899-2024 |
Test method for the release of volatile organic compounds in artificial boards and their products-Small release chamber method {译} 人造板及其制品中挥发性有机化合物释放量试验方法-小型释放舱法 |
China National Standards boards |
English PDF |
| GB/T 43799-2024 |
Sectional specification for high-density interconnect printed boards {译} 高密度互连印制板分规范 |
China National Standards boards |
English PDF |
| GB/T 43059-2023 |
Flatness control requirements for printed boards and printed board assemblies {译} 印制板及印制板组装件的平整度控制要求 |
China National Standards boards |
English PDF |
| GB/T 23451-2023 |
Lightweight partition boards for construction {译} 建筑用轻质隔墙条板 |
China National Standards boards |
English PDF |
| GB/T 42575-2023 |
Performance requirements and test methods for Beidou dual-model OEM boards {译} 北斗双模型OEM板性能要求及测试方法 |
China National Standards boards |
English PDF |
| GB/T 40923.1-2021 |
Snowboards—Binding mounting area—Part 1:Requirements and test methods for snowboards without inserts 滑雪单板 固定器安装区 第1部分：无嵌件滑雪单板的要求和试验方法 |
China National Standards boards |
English PDF |
| GB/T 40923.2-2021 |
Snowboards—Binding mounting area—Part 2:Requirements and test methods for snowboards with inserts 滑雪单板 固定器安装区 第2部分：含嵌件滑雪单板的要求和试验方法 |
China National Standards boards |
English PDF |
| GB/T 7251.3-2017 |
Low-voltage switchgear and controlgear assemblies—Part 3: Distribution boards intended to be operated by ordinary persons（DBO） 低压成套开关设备和控制设备 第3部分: 由一般人员操作的配电板（DBO） |
China National Standards boards |
English PDF |
| GB/T 12105-2017 |
General technical requirements of electronic keyboards 电子琴通用技术条件 |
China National Standards boards |
English PDF |
| GB/T 12106-2017 |
Requirements and methods of environmental test for electronic keyboards 电子琴的环境试验要求和试验方法 |
China National Standards boards |
English PDF |
| GB/T 4588.4-2017 |
Sectional specification for rigid multilayer printed boards 刚性多层印制板分规范 |
China National Standards boards |
English PDF |
| GB/T 12631-2017 |
Test method for resistance of conductors of printed boards 印制板导线电阻测试方法 |
China National Standards boards |
English PDF |
| GB/T 16261-2017 |
General specification for printed circuit boards 印制板总规范 |
China National Standards boards |
English PDF |
| GB/T 33016-2016 |
Test methods for bongding sheet for multilayer printed boards 多层印制板用粘结片试验方法 |
China National Standards boards |
English PDF |
| GB/T 33015-2016 |
General rules for bonding sheet for multilayer printed boards 多层印制板用粘结片通用规则 |
China National Standards boards |
English PDF |
| GB/T 5849-2016 |
Blockboards and battenboards 细木工板 |
China National Standards boards |
English PDF |
| GB/T 15157.2-2015 |
Connectors for frequencies below 3 MHz for use with printed boards—Part 2：Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm with common mounting features 印制板用频率低于3 MHz的连接器 第2部分：有质量评定的具有通用安装特征基本网格2.54 mm的印制板用两件式连接器详细规范 |
China National Standards boards |
English PDF |
| GB/T 12626.9-2015 |
Hard fibreboard—Part 9: Load bearing boards for use in humid conditions 湿法硬质纤维板 第9部分：潮湿条件下使用的承载用板 |
China National Standards boards |
English PDF |
| GB/T 12626.8-2015 |
Hard fibreboard—Part 8: Load bearing boards for use in dry conditions 湿法硬质纤维板 第8部分：干燥条件下使用的承载用板 |
China National Standards boards |
English PDF |
| GB/T 12626.7-2015 |
Hard fibreboard—Part 7：General purpose boards for use in exterior conditions 湿法硬质纤维板 第7部分：室外条件下使用的普通用板 |
China National Standards boards |
English PDF |
| GB/T 12626.6-2015 |
Hard fibreboard—Part 6: General purpose boards for use in high-humid conditions 湿法硬质纤维板 第6部分：高湿条件下使用的普通用板 |
China National Standards boards |
English PDF |
| GB/T 12626.5-2015 |
Hard fibreboard—Part 5:General purpose boards for use in humid conditions 湿法硬质纤维板 第5部分：潮湿条件下使用的普通用板 |
China National Standards boards |
English PDF |
| GB/T 12626.4-2015 |
Hard fibreboard—Part 4: General purpose boards for use in dry conditions 湿法硬质纤维板 第4部分：干燥条件下使用的普通用板 |
China National Standards boards |
English PDF |
| GB/T 18373-2013 |
E-glass fabric woven for printed boards 印制板用E玻璃纤维布 |
China National Standards boards |
English PDF |
| GB/T 29847-2013 |
Test methods for copper foil used for printed boards 印制板用铜箔试验方法 |
China National Standards boards |
English PDF |
| GB/T 29500-2013 |
Wood-plastic composite boards for concrete-form 建筑模板用木塑复合板 |
China National Standards boards |
English PDF |
| GB/T 29419-2012 |
Establishing performance ratings for wood-plastic composite deck boards and guardrail system performance 塑木复合材料铺板性能等级和护栏体系性能 |
China National Standards boards |
English PDF |
| GB/T 28248-2012 |
Cemented carbide drills for printed boards 印制板用硬质合金钻头 |
China National Standards boards |
English PDF |
| GB/T 15157.12-2011 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits 频率低于3MHz的印制板连接器 第12部分：集成电路插座的尺寸、一般要求和试验方法详细规范 |
China National Standards boards |
English PDF |
| GB/T 20633.3-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3：Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace(Class 3) 承载印制电路板用涂料(敷形涂料) 第3部分：一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料 |
China National Standards boards |
English PDF |
| GB/T 20633.2-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 2：Methods of test 承载印制电路板用涂料(敷形涂料) 第2部分：试验方法 |
China National Standards boards |
English PDF |
| GB 28231-2011 |
General provisions of safety and health for writing boards 书写板安全卫生要求 |
China National Standards boards |
English PDF |
| GB 24429-2009 |
Sports helmets - Safety requirements and testing methods for sports helmets for cyclists and users of skateboards and roller skates 运动头盔 自行车、滑板、轮滑运动头盔的安全要求和试验方法 |
China National Standards boards |
English PDF |
| GB/T 24137-2009 |
Wood-plastic composite decorative boards 木塑装饰板 |
China National Standards boards |
English PDF |
| GB/T 15157.14-2007 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards boards |
English PDF |
| GB/T 20633.1-2006 |
Coatings for loaded printed wire boards(conformal coating）- Part 1: Definitions,classification and general requirements 承载印制电路板用涂料（敷形涂料）第1部分：定义、分类和一般要求 |
China National Standards boards |
English PDF |
| GB 7251.3-2006 |
Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards 低压成套开关设备和控制设备 第3部分：对非专业人员可进入场地的低压成套开关设备和控制设备-配电板的特殊要求 |
China National Standards boards |
English PDF |
| GB/T 15157.7-2002 |
Connectors for frequencies below 3MHz for use with printed boards--Part 7:Detail specification for connectors，8-way，including fixed and free connectors with common mating features，with assessed quality 频率低于3 MHz的印制板连接器 第7部分:有质量评定的具有通用插合特性的8位固定和自由连接器详细规范 |
China National Standards boards |
English PDF |
| GB/T 4677-2002 |
Test methods of printed boards 印制板测试方法 |
China National Standards boards |
English PDF |
| GB/T 4588.3-2002 |
Design and use of printed boards 印制板的设计和使用 |
China National Standards boards |
English PDF |
| GB/T 1913.2-2002 |
Bleached pulp paper for printed boards 印制板用漂白木浆纸 |
China National Standards boards |
English PDF |
| GB/T 18335-2001 |
Specification for flex-rigid multilayer printed boards with through connections 有贯穿连接的刚挠多层印制板规范 |
China National Standards boards |
English PDF |
| GB/T 18334-2001 |
Specification for flexible multilayer printed boards with through conections 有贯穿连接的挠性多层印制板规范 |
China National Standards boards |
English PDF |
| GB/T 4588.12-2000 |
Specification for mass laminationpanels (semi-manufactured multilayer printed boards) 预制内层层压板规范(半制成多层印制板) |
China National Standards boards |
English PDF |
| GB/T 15157.2-1998 |
Connectors for frequencies below 3MHz for use with printed boards--Part 2:Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm(0.1in) with commonmounting features 印制板用频率低于3 MHz的连接器 第2部分:有质量评定的具有通用安装特征 基本网格2.54 mm(0.1in)的印制板用两件式连接器详细规范 |
China National Standards boards |
English PDF |
| GB/T 4588.4-1996 |
Sectional specification--Multilayer printed boards 多层印制板 分规范 |
China National Standards boards |
English PDF |
| GB/T 16317-1996 |
Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 多层印制电路用限定燃烧性的薄覆铜箔聚酰亚胺玻璃布层压板 |
China National Standards boards |
English PDF |
| GB/T 4588.2-1996 |
Sectional specification:single and doublesided printed boards with plated-through holes 有金属化孔单双面印制板分规范 |
China National Standards boards |
English PDF |
| GB/T 4588.1-1996 |
Sectional specification:single and doublesided printed boards with plain holes 无金属化孔单双面印制板分规范 |
China National Standards boards |
English PDF |
| GB/T 16261-1996 |
Generic specification of printed boards 印制板总规范 |
China National Standards boards |
English PDF |
| GB/T 4588.10-1995 |
Printed boards--Part 10:Specification for flex-rigid double-sided printed boards with through connections 印制板 第10部分:有贯穿连接的刚挠双面印制板规范 |
China National Standards boards |
English PDF |
| GB/T 15157-1994 |
Connectors for frequencies below 3MHz for use with printed boards--Part l:Generic specification--Gen-eral requirements and guide for the preparation of detail specifications， with assessedquality 印制板用频率低于3 MHz的连接器 第1 部分:总规范 一般要求和编制有质量评定的详细规范的导则 |
China National Standards boards |
English PDF |
| GB/T 14516-1993 |
Specification for single and double sided flexible printed boards without through connections 无贯穿连接的单、双面挠性印制板技术条件 |
China National Standards boards |
English PDF |
| GB/T 14515-1993 |
Specification for single and double sided flexible printed boards with through connections 有贯穿连接的单、双面挠性印制板技术条件 |
China National Standards boards |
English PDF |
| GB/T 12631-1990 |
Test method for resistance of conductor of printed boards 印制导线电阻测试方法 |
China National Standards boards |
English PDF |
| GB/T 12630-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet， general purpose grade， for use in the fabrication of multilayer printed boards 一般用途的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards boards |
English PDF |
| GB/T 12629-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 限定燃烧性的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards boards |
English PDF |
| GB/T 10021-1988 |
Office machines -- Basic arrangement for the alphanumeric section of keyboards operated with both hands 办公机器 双手操作键盘字母数字区的基本布局 |
China National Standards boards |
English PDF |
| GB/T 9310-1988 |
Adding machines and calculating machines--Numeric section of ten-key keyboards 加法器和计算器 十键键盘的数字区 |
China National Standards boards |
English PDF |
| GB/T 4872-1985 |
Office machines and data processing equipment--Principles governing the positioning of control keys on key-boards 办公机器和数据处理设备键盘上控制键定位的原则 |
China National Standards boards |
English PDF |
| Find out:61Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
