Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 6113.106-2024 |
Specifications for radio disturbance and immunity measuring equipment and measurement methods - Part 1-6: Radio disturbance and immunity measuring equipment - EMC antenna calibration {译} 无线电骚扰和抗扰度测量设备和测量方法规范-第1-6部分:无线电骚扰和抗扰度测量设备-EMC天线校准 |
China National Standards calibration |
English PDF |
GB/Z 44048-2024 |
Wind power generation system-numerical field calibration method for power performance test of wind turbines {译} 风能发电系统-风力发电机组功率性能测试的数值场标定方法 |
China National Standards calibration |
English PDF |
GB/T 43916-2024 |
Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainty of capacitance diaphragm vacuum gauges {译} 真空技术-真空计-电容薄膜真空计的规范、校准和测量不确定度 |
China National Standards calibration |
English PDF |
GB/T 43971-2024 |
Integrating sphere light source test specifications for remote sensor calibration {译} 遥感器定标用积分球光源测试规范 |
China National Standards calibration |
English PDF |
GB/T 25138-2024 |
Standard silica sand for calibration of casting binders {译} 检定铸造粘结剂用标准硅砂 |
China National Standards calibration |
English PDF |
GB/T 5275.1-2024 |
Gas analysis - Preparation of calibration gas mixtures by dynamic method - Part 1: General requirements {译} 气体分析-动态法制备校准用混合气体-第1部分:通用要求 |
China National Standards calibration |
English PDF |
GB/T 35861-2024 |
Gas analysis - General quality requirements and metrological traceability of calibration gas mixtures {译} 气体分析-校准用混合气体的通用质量要求和计量溯源性 |
China National Standards calibration |
English PDF |
GB/T 43828.1-2024 |
Printing technology - Prepress data exchange - Color scale for input scanner calibration - Part 1: Color scale for input scanner calibration {译} 印刷技术-印前数据交换-输入扫描仪校准用色标-第1部分:输入扫描仪校准用色标 |
China National Standards calibration |
English PDF |
GB/T 43661-2024 |
Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc. {译} 表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜(ESPM,如SSRM和SCM)空间分辨的定义和校准 |
China National Standards calibration |
English PDF |
GB/T 43596-2023 |
Image grayscale standard display function calibration method {译} 影像灰度标准显示函数标定方法 |
China National Standards calibration |
English PDF |
GB/T 43536.2-2023 |
Three-dimensional integrated circuits Part 2: calibration requirements for fine-pitch stacked chips {译} 三维集成电路 第2部分:微间距叠层芯片的校准要求 |
China National Standards calibration |
English PDF |
GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: calibration of standard hardness blocks {译} 金属材料 巴氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 43432.2-2023 |
Metallic materials - Barcol hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 巴氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 42660-2023 |
Aerosol particle number concentration calibration of condensation particle counters {译} 气溶胶颗粒数量浓度 凝结核颗粒计数器的校准 |
China National Standards calibration |
English PDF |
GB/T 42659-2023 |
Surface chemical analysis Scanning probe microscopy Determination of geometric quantities using scanning probe microscopy: calibration of measurement systems {译} 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量:测量系统校准 |
China National Standards calibration |
English PDF |
GB/T 42712-2023 |
Design principles and calibration methods of Chinese dummies for mechanical damage testing {译} 力学损伤测试用中国假人设计原则与标定方法 |
China National Standards calibration |
English PDF |
GB/T 42646-2023 |
Layout and measurement method of spaceborne laser altimeter site calibration detector {译} 星载激光测高仪场地定标探测器布设与测量方法 |
China National Standards calibration |
English PDF |
GB/T 42647-2023 |
On-orbit site calibration method for spaceborne laser altimeter {译} 星载激光测高仪在轨场地定标方法 |
China National Standards calibration |
English PDF |
GB/T 18779.2-2023 |
Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment calibration, and Product Verification {译} 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分:GPS测量、测量设备校准和产品验证中的测量不确定度评估指南 |
China National Standards calibration |
English PDF |
GB/T 5275.6-2023 |
Gas analysis - Preparation of calibration gas mixtures by dynamic method - Part 6: Critical flow orifice {译} 气体分析 动态法制备校准用混合气体 第6部分:临界流锐孔 |
China National Standards calibration |
English PDF |
GB/T 17394.3-2022 |
Metallic materials - Leeb hardness test - Part 3: calibration of standard hardness blocks {译} 金属材料 里氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 17394.2-2022 |
Metallic materials - Leeb hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 里氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 230.3-2022 |
Metallic materials - Rockwell hardness test - Part 3: calibration of standard hardness blocks {译} 金属材料 洛氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 21838.3-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: calibration of standard blocks {译} 金属材料 硬度和材料参数的仪器化压入试验 第3部分:标准块的标定 |
China National Standards calibration |
English PDF |
GB/T 21838.2-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines {译} 金属材料 硬度和材料参数的仪器化压入试验 第2部分:试验机的检验和校准 |
China National Standards calibration |
English PDF |
GB/T 231.3-2022 |
Metallic materials - Brinell hardness test - Part 3: calibration of standard hardness blocks {译} 金属材料 布氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 231.2-2022 |
Metallic materials - Brinell hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 布氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 230.2-2022 |
Metallic materials - Rockwell hardness test - Part 2: Inspection and calibration of hardness testers and indenters {译} 金属材料 洛氏硬度试验 第2部分:硬度计及压头的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 4854.3-2022 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 3:Reference equivalent threshold vibratory force levels for pure tones and bone vibrators 声学 校准测听设备的基准零级 第3部分: 骨振器纯音基准等效阈振动力级 |
China National Standards calibration |
English PDF |
GB/T 5275.2-2022 |
Gas analysis - Preparation of calibration gas mixtures by dynamic method - Part 2: Piston pumps {译} 气体分析 动态法制备校准用混合气体 第2部分:活塞泵 |
China National Standards calibration |
English PDF |
GB/T 21919-2022 |
Laboratory medicine - Competence requirements for calibration laboratories operating reference measurement procedures {译} 检验医学 运行参考测量程序的校准实验室的能力要求 |
China National Standards calibration |
English PDF |
GB/T 41814.1-2022 |
Information technology - Biometric calibration, augmentation and fusion data - Part 1: Fusion information format {译} 信息技术 生物特征识别校准、增强和融合数据 第1部分:融合信息格式 |
China National Standards calibration |
English PDF |
GB/T 16825.1-2022 |
Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) compression testing machines - Inspection and calibration of force measuring systems {译} 金属材料 静力单轴试验机的检验与校准 第1部分:拉力和(或)压力试验机 测力系统的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 21540-2022 |
Hydraulic transmissions - On-line automatic particle counting systems for liquids - calibration and verification methods {译} 液压传动 在线液体自动颗粒计数系统 校准和验证方法 |
China National Standards calibration |
English PDF |
GB/T 20485.43-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards calibration |
English PDF |
GB/T 20485.32-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分:谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards calibration |
English PDF |
GB/T 40336-2021 |
Non-destructive testing—Leak testing—calibration of reference leaks for gases 无损检测 泄漏检测 气体参考漏孔的校准 |
China National Standards calibration |
English PDF |
GB/T 40129-2021 |
Surface chemical analysis—Secondary ion mass spectrometry—calibration of the mass scale for a time-of-flight secondary ion mass spectrometer 表面化学分析 二次离子质谱 飞行时间二次离子质谱仪质量标校准 |
China National Standards calibration |
English PDF |
GB/T 15579.14-2021 |
Arc welding equipment -- Part 14: calibration, validation and consistency testing 弧焊设备 第14部分:校准、确认和一致性试验 |
China National Standards calibration |
English PDF |
GB/T 41114-2021 |
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards calibration |
English PDF |
GB/T 29732-2021 |
Surface chemical analysis—Medium resolution auger electron spectrometers—calibration of energy scales for elemental analysis 表面化学分析 中等分辨俄歇电子能谱仪 元素分析用能量标校准 |
China National Standards calibration |
English PDF |
GB/T 40961-2021 |
calibration methods of rock triaxial testing apparatus 岩石三轴试验仪校验方法 |
China National Standards calibration |
English PDF |
GB/T 39693.9-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分:硬度计的校准和验证 |
China National Standards calibration |
English PDF |
GB/T 40661-2021 |
calibration specification of measurement instrument for power frequency magnetic field 工频磁场测量仪校准规范 |
China National Standards calibration |
English PDF |
GB/T 40523-2021 |
Technology specification for geometric calibration of 1:25000 1:50000 optical mapping satellite 1:25000 1:50000光学测绘卫星几何检校技术规范 |
China National Standards calibration |
English PDF |
GB/T 38888-2020 |
Performance and calibration methods for data acquisition software 数据采集软件的性能及校准方法 |
China National Standards calibration |
English PDF |
GB/T 38677-2020 |
Gas analysis—Measurement procedure and result—Technical requirements for calibration 气体分析 测量过程及结果 校准技术要求 |
China National Standards calibration |
English PDF |
GB/T 39432-2020 |
Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block 无损检测 超声检测 阶梯试块 |
China National Standards calibration |
English PDF |
GB/T 27025-2019 |
General requirements for the competence of testing and calibration laboratories 检测和校准实验室能力的通用要求 |
China National Standards calibration |
English PDF |
GB/T 27025-2019 |
General requirements for the competence of testing and calibration laboratories 检测和校准实验室能力的通用要求 |
China National Standards calibration |
English PDF |
GB/T 37984-2019 |
Nanotechnologies—Raman shift correction value for spectrometer calibration 纳米技术 用于拉曼光谱校准的频移校正值 |
China National Standards calibration |
English PDF |
GB/T 37776-2019 |
Methods for the calibration of dynamic force transducers—Calibration by shock force 动态力传感器校准方法 冲击力法校准 |
China National Standards calibration |
English PDF |
GB/T 6113.106-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-6: Radio disturbance and immunity measuring apparatus—EMC antenna calibration 无线电骚扰和抗扰度测量设备和测量方法规范-第1-6部分:无线电骚扰和抗扰度测量设备-EMC天线校准 |
China National Standards calibration |
English PDF |
GB/T 6113.105-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分:无线电骚扰和抗扰度测量设备-5MHz~18GHz天线校准场地和参考试验场地 |
China National Standards calibration |
English PDF |
GB/T 37180-2018 |
Gas analysis—Handling of calibration gases and gas mixtures—Guidelines 气体分析-校准用纯气和混合气体的使用-指南 |
China National Standards calibration |
English PDF |
GB/T 36260.2-2018 |
Detection ability - Part 2: Method for determining the detection limit of linear calibration 检出能力-第2部分:线性校准情形检出限的确定方法 |
China National Standards calibration |
English PDF |
GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分:普适校正法 |
China National Standards calibration |
English PDF |
GB/T 35015-2018 |
calibration method for calibrated cylinder used in water jacket hydrostatic test 气瓶外测法水压试验用标准瓶的标定方法 |
China National Standards calibration |
English PDF |
GB/T 36412-2018 |
Verification and calibration of force standard machines 力标准机的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 33260.3-2018 |
Capability of detection—Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used 检出能力 第3部分:无校准数据情形响应变量临界值的确定方法 |
China National Standards calibration |
English PDF |
GB/T 33260.2-2018 |
Capability of detection—Part 2: Methodology in the linear calibration case 检出能力 第2部分:线性校准情形检出限的确定方法 |
China National Standards calibration |
English PDF |
GB/T 33260.5-2018 |
Capability of detection—Part 5: Methodology in the linear and nonlinear calibration cases 检出能力 第5部分:非线性校准情形检出限的确定方法 |
China National Standards calibration |
English PDF |
GB/T 20441.2-2018 |
Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique 电声学 测量传声器 第2部分:采用互易技术对实验室标准传声器声压校准的原级方法 |
China National Standards calibration |
English PDF |
GB/T 5274.1-2018 |
Gas analysis—Preparation of calibration gas mixtures—Part 1:Gravimetric method for class I mixtures 气体分析 校准用混合气体的制备 第1部分:称量法制备一级混合气体 |
China National Standards calibration |
English PDF |
GB/T 35860-2018 |
Gas analysis—Contents of certificates for calibration gas mixtures 气体分析 校准用混合气体证书内容 |
China National Standards calibration |
English PDF |
GB/T 35861-2018 |
Gas analysis—General quality assurance aspects in the use of calibration gas mixtures—Guidelines 气体分析 校准用混合气体使用过程中的一般质量保证 指南 |
China National Standards calibration |
English PDF |
GB/T 20485.16-2018 |
Methods for the calibration of vibration and shock transducers—Part 16: Calibration by Earth’s gravitation 振动与冲击传感器校准方法 第16部分:地球重力法校准 |
China National Standards calibration |
English PDF |
GB/T 36063-2018 |
Nanotechnologies—Raman shift standard curve for spectrometer calibration 纳米技术 用于拉曼光谱校准的标准拉曼频移曲线 |
China National Standards calibration |
English PDF |
GB/T 20485.33-2018 |
Methods for the calibration of vibration and shock transducers—Part 33: Testing of magnetic field sensitivity 振动与冲击传感器校准方法 第33部分:磁灵敏度测试 |
China National Standards calibration |
English PDF |
GB/T 20485.42-2018 |
Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity 振动与冲击传感器校准方法 第42部分:高精度地震计的重力加速度法校准 |
China National Standards calibration |
English PDF |
GB/T 34876-2017 |
Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge 真空技术 真空计 与标准真空计直接比较校准结果的不确定度评定 |
China National Standards calibration |
English PDF |
GB/T 34873-2017 |
Vacuum gauges—calibration by direct comparison with a reference gauge 真空计 与标准真空计直接比较校准 |
China National Standards calibration |
English PDF |
GB/T 4130-2017 |
Acoustics—Low frequency calibration methods of hydrophones 声学 水听器低频校准方法 |
China National Standards calibration |
English PDF |
GB/T 34509.2-2017 |
In-orbit field radiometric calibration for optical remote sensor of land observation satellite—Part 2:Thermal infrared 陆地观测卫星光学遥感器在轨场地辐射定标方法 第2部分:热红外 |
China National Standards calibration |
English PDF |
GB/T 34509.1-2017 |
In-orbit field radiometric calibration for optical remote sensor of land observation satellite—Part 1:Visible-near infrared 陆地观测卫星光学遥感器在轨场地辐射定标方法 第1部分:可见光近红外 |
China National Standards calibration |
English PDF |
GB/T 6496-2017 |
Test method of aerospace solar cells calibration 航天用太阳电池标定方法 |
China National Standards calibration |
English PDF |
GB/T 20441.5-2017 |
Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison 电声学 测量传声器 第5部分:工作标准传声器声压校准的比较法 |
China National Standards calibration |
English PDF |
GB/T 22571-2017 |
Surface chemical analysis—X-ray photoelectron spectrometers—calibration of energy scales 表面化学分析 X射线光电子能谱仪 能量标尺的校准 |
China National Standards calibration |
English PDF |
GB/T 33865-2017 |
calibration method for photosynthetic active radiometer 光合有效辐射表校准方法 |
China National Standards calibration |
English PDF |
GB/T 33868-2017 |
calibration method for ultraviolet radiometer 紫外辐射表校准方法 |
China National Standards calibration |
English PDF |
GB/T 33523.701-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: calibration and measurement standards for contact (stylus) instruments 产品几何技术规范(GPS) 表面结构 区域法 第701部分:接触(触针)式仪器的校准与测量标准 |
China National Standards calibration |
English PDF |
GB/T 4341.3-2016 |
Metallic materials—Shore hardness test—Part 3: calibration of reference blocks 金属材料 肖氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 32660.2-2016 |
Metallic materials—Webster hardness test—Part 2: Verification and calibration of hardness testers 金属材料 韦氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 12548-2016 |
Motor vehicles speedometer and odometer calibration method 汽车速度表、里程表检验校正方法 |
China National Standards calibration |
English PDF |
GB/T 32660.3-2016 |
Metallic materials—Webster hardness test—Part 3: calibration of reference blocks 金属材料 韦氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 13235.1-2016 |
Petroleum and liquid petroleum products—calibration of vertical cylindrical tanks—Part 1: Strapping method 石油和液体石油产品 立式圆筒形油罐容积标定 第1部分:围尺法 |
China National Standards calibration |
English PDF |
GB/T 4854.9-2016 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分:确定基准听阈级的优选测试条件 |
China National Standards calibration |
English PDF |
GB/T 32514.4-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 4: calibration system 电阻焊 焊接电流的测量 第4部分:校准系统 |
China National Standards calibration |
English PDF |
GB/T 18854-2015 |
Hydraulic fluid power—calibration of automatic particle counters for liquids 液压传动 液体自动颗粒计数器的校准 |
China National Standards calibration |
English PDF |
GB/T 20485.41-2015 |
Methods for the calibration of vibration and shock transducers—Part 41: Calibration of laser vibrometers 振动与冲击传感器校准方法 第41部分:激光测振仪校准 |
China National Standards calibration |
English PDF |
GB/T 19799.1-2015 |
Non-destructive testing—Ultrasonic testing—Specification for calibration block No. 1 无损检测 超声检测 1号校准试块 |
China National Standards calibration |
English PDF |
GB/T 31195-2014 |
High chloride high ammonia wastewater―Determination of chemical oxygen demand―Chloride ion calibration method 高氯高氨废水 化学需氧量的测定 氯离子校正法 |
China National Standards calibration |
English PDF |
GB/T 4854.6-2014 |
Acoustics―Reference zero for the calibration of audiometric equipment―Part 6: Reference hearing threshold levels for test signals of short duration 声学 校准测听设备的基准零级 第6部分:短时程测试信号的基准听阈 |
China National Standards calibration |
English PDF |
GB/T 31010-2014 |
Spectral calibration in laboratory for dispersive hyperspectral sensor 色散型高光谱遥感器实验室光谱定标 |
China National Standards calibration |
English PDF |
GB/T 30952-2014 |
calibration method of water level gauge test equipment 水位试验台校验方法 |
China National Standards calibration |
English PDF |
GB/T 5275.9-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 9: Saturation method 气体分析 动态体积法制备校准用混合气体 第9部分:饱和法 |
China National Standards calibration |
English PDF |
GB/T 5275.8-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 8: Diffusion method 气体分析 动态体积法制备校准用混合气体 第8部分:扩散法 |
China National Standards calibration |
English PDF |
GB/T 5275.7-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow controllers 气体分析 动态体积法制备校准用混合气体 第7部分:热式质量流量控制器 |
China National Standards calibration |
English PDF |
GB/T 5275.6-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 6: Critical orifices 气体分析 动态体积法制备校准用混合气体 第6部分:临界锐孔 |
China National Standards calibration |
English PDF |
GB/T 5275.5-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 5: Capillary calibration devices 气体分析 动态体积法制备校准用混合气体 第5部分:毛细管校准器 |
China National Standards calibration |
English PDF |
GB/T 5275.4-2014 |
Gas analysis—Preparation of calibration gas mixtures using dynamic volumetric methods—Part 4: Continuous syringe injection method 气体分析 动态体积法制备校准用混合气体 第4部分:连续注射法 |
China National Standards calibration |
English PDF |
GB/T 5275.2-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 2: Volumetric pumps 气体分析 动态体积法制备校准用混合气体 第2部分:容积泵 |
China National Standards calibration |
English PDF |
GB/T 5275.1-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 1: Methods of calibration 气体分析 动态体积法制备校准用混合气体 第1部分:校准方法 |
China National Standards calibration |
English PDF |
GB/T 5275.11-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 11: Electrochemical generation 气体分析 动态体积法制备校准用混合气体 第11部分:电化学发生法 |
China National Standards calibration |
English PDF |
GB/T 30119-2013 |
Preparation method of calibration solution for atomic absorption measurement 原子吸收测量用校准溶液制备方法 |
China National Standards calibration |
English PDF |
GB/T 29858-2013 |
Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis 分子光谱多元校正定量分析通则 |
China National Standards calibration |
English PDF |
GB/T 29820.1-2013 |
Assessment of uncertainty in calibration and use of flow measurement devices - Part 1: Linear calibration relationships 流量测量装置校准和使用不确定度的评估 第1部分:线性校准关系 |
China National Standards calibration |
English PDF |
GB/T 12164.3-2013 |
Reference beta radiations - Part 3: calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence β参考辐射 第3部分:场所和个人剂量仪的校准及其能量响应和角响应的确定 |
China National Standards calibration |
English PDF |
GB/T 29732-2013 |
Surface chemical analysis - Medium resolution auger electron spectrometers - calibration of energy scales for elemental analysis 表面化学分析 中等分辨率俄歇电子谱仪 元素分析用能量标校准 |
China National Standards calibration |
English PDF |
GB/T 29731-2013 |
Surface chemical analysis - High resolution auger electron spectrometers - calibration of energy scales for elemental and chemical-state analysis 表面化学分析 高分辨俄歇电子能谱仪 元素和化学态分析用能量标校准 |
China National Standards calibration |
English PDF |
GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards calibration |
English PDF |
GB/T 4340.3-2012 |
Metallic materials - Vickers hardness test - Part 3:calibration of reference blocks 金属材料 维氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 4340.2-2012 |
Metallic materials - Vickers hardness test - Part 2:Verification and calibration of testing machines 金属材料 维氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 231.3-2012 |
Metallic materials - Brinell hardness test - Part 3: calibration of reference blocks 金属材料 布氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 231.2-2012 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines 金属材料 布氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 230.3-2012 |
Metallic materials - Rockwell hardness test - Part 3:calibration of reference blocks(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第3部分:标准硬度块(A、B、C、D、E、F、G、H、K、N、T标尺)的标定 |
China National Standards calibration |
English PDF |
GB/T 230.2-2012 |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第2部分:硬度计(A、B、C、D、E、F、G、H、K、N、T标尺)的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 18449.3-2012 |
Metallic materials - Knoop hardness test - Part 3:calibration of reference blocks 金属材料 努氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 18449.2-2012 |
Metallic materials - Knoop hardness test - Part 2:Verification and calibration of testing machines 金属材料 努氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 17394.3-2012 |
Metallic materials - Leeb hardness test - Part 3: calibration of reference blocks 金属材料 里氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards calibration |
English PDF |
GB/T 17394.2-2012 |
Metallic materials - Leeb hardness test - Part 2: Verification and calibration of hardness testers 金属材料 里氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 19799.2-2012 |
Non-destructive testing - Ultrasonic testing - Specification for calibration block No.2 无损检测 超声检测 2号校准试块 |
China National Standards calibration |
English PDF |
GB/T 14055.2-2012 |
Reference neutron radiations - Part 2: calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field 中子参考辐射 第2部分:与表征辐射场基本量相关的辐射防护仪表校准基础 |
China National Standards calibration |
English PDF |
GB/T 20485.31-2011 |
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试 |
China National Standards calibration |
English PDF |
GB/T 27762-2011 |
Standard test method for mass scale calibration of thermogravimetric analyzers 热重分析仪质量示值校准的试验方法 |
China National Standards calibration |
English PDF |
GB/T 26827-2011 |
calibration method for measurement equipment of wave plate phase retardation 波片相位延迟测量装置的校准方法 |
China National Standards calibration |
English PDF |
GB/T 3849.2-2010 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks 硬质合金 洛氏硬度试验(A标尺) 第2部分:标准试块的制备和校准 |
China National Standards calibration |
English PDF |
GB/T 25918-2010 |
Portable calibration instrument for water meters 便携式水表校验仪 |
China National Standards calibration |
English PDF |
GB/T 25917-2010 |
Axial force-applied fatigue testing machines dynamic force calibration 轴向加力疲劳试验机动态力校准 |
China National Standards calibration |
English PDF |
GB/T 20485.15-2010 |
Methods for the calibration of vibration and shock transducers - Part 15: Primary angular vibration calibration by laser interferometry 振动与冲击传感器校准方法 第15部分:激光干涉法角振动绝对校准 |
China National Standards calibration |
English PDF |
GB/T 25498.3-2010 |
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry 电声学 人头模拟器和耳模拟器 第3部分:校准压耳式测听耳机用声耦合器 |
China National Standards calibration |
English PDF |
GB/T 25498.1-2010 |
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones 电声学 人头模拟器和耳模拟器 第1部分:校准压耳式耳机用耳模拟器 |
China National Standards calibration |
English PDF |
GB/T 20441.3-2010 |
Electroacoustics - Measurement microphone - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique 电声学 测量传声器 第3部分:采用互易技术对实验室标准传声器的自由场校准的原级方法 |
China National Standards calibration |
English PDF |
GB/T 12162.4-2010 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards calibration |
English PDF |
GB/T 25269-2010 |
Rubber - Guide to the calibration of test equipment 橡胶 试验设备校准指南 |
China National Standards calibration |
English PDF |
GB/T 22554-2010 |
Linear calibration using reference materials 基于标准样品的线性校准 |
China National Standards calibration |
English PDF |
GB/T 8029-2010 |
calibration fluid for diesel injection pump 柴油机喷油泵校泵油 |
China National Standards calibration |
English PDF |
GB/T 24958.1-2010 |
Refrigerated light hydrocarbon fluids - calibration of spherical tanks in ships - Part 1: Stereo photogrammetry 冷冻轻烃流体 船上球形储罐的校准 第1部分:立体照相测量法 |
China National Standards calibration |
English PDF |
GB/T 24957-2010 |
Refrigerated light hydrocarbon fluids - calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement 冷冻轻烃流体 船上膜式储罐和独立棱柱形储罐的校准 物理测量法 |
China National Standards calibration |
English PDF |
GB/T 24247-2009 |
calibration and usage of ionization chamber systems for assay of radionuclides 测定放射性核素用电离室系统的校准和使用 |
China National Standards calibration |
English PDF |
GB/T 5275.10-2009 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method 气体分析 动态体积法制备校准用混合气体 第10部分:渗透法 |
China National Standards calibration |
English PDF |
GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards calibration |
English PDF |
GB/T 22876-2008 |
Paper,board and corrugated fiberboard - Description and calibration of compression testing equipment 纸、纸板和瓦楞纸板 压缩试验仪的描述和校准 |
China National Standards calibration |
English PDF |
GB/T 22571-2008 |
Surface chemical analysis ?X-ray photoelectron spectrometers ?calibration of energy scales 表面化学分析 X射线光电子能谱仪 能量标尺的校准 |
China National Standards calibration |
English PDF |
GB/T 13823.20-2008 |
Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods 振动与冲击传感器校准方法 加速度计谐振测试 通用方法 |
China National Standards calibration |
English PDF |
GB/T 13823.19-2008 |
Methods for the calibration of vibration and shock pick-ups - Calibration by Earth’s gravitation 振动与冲击传感器的校准方法 地球重力法校准 |
China National Standards calibration |
English PDF |
GB/T 16640-2008 |
Standard guide for selection and calibration of dosimetry systems for radiation processing 辐射加工剂量测量系统的选择和校准导则 |
China National Standards calibration |
English PDF |
GB/T 16510-2008 |
The requirements for the competence of a radiation processing dosimetry calibration laboratory 辐射加工剂量学校准实验室的能力要求 |
China National Standards calibration |
English PDF |
GB/T 15247-2008 |
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method 微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法 |
China National Standards calibration |
English PDF |
GB/T 8997-2008 |
calibration for alpha, beta and alpha/beta surface contamination meters and monitors α、β表面污染测量仪与监测仪的校准 |
China National Standards calibration |
English PDF |
GB/T 4854.7-2008 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions 声学 校准测听设备的基准零级 第7部分: 自由场与扩散场测听的基准听阈 |
China National Standards calibration |
English PDF |
GB/T 4854.5-2008 |
Acoustics - Reference zero for the calibration of audiometric equipment- Part 5: Reference equivalent threshold sound pressure levels for pure tone in the frequency range 8 kHz to 16 kHz 声学 校准测听设备的基准零级 第5部分:8kHz-16kHz频率范围纯音基准等效阈声压级 |
China National Standards calibration |
English PDF |
GB/T 5274-2008 |
Gas analysis - Preparation of calibration gas mixture - Gravimetric method 气体分析 校准用混合气体的制备 称量法 |
China National Standards calibration |
English PDF |
GB/T 21838.3-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: calibration of reference blocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards calibration |
English PDF |
GB/T 21838.2-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准 |
China National Standards calibration |
English PDF |
GB/T 16825.1-2008 |
Verification of static uniaxial testing machines - Part 1:Tension/compression testing machines - Verification and calibration of the force-measuring system 静力单轴试验机的检验 第1部分: 拉力和(或)压力试验机测力系统的检验与校准 |
China National Standards calibration |
English PDF |
GB/T 13634-2008 |
calibration of force-proving instruments used for the verification of uniaxlial testing machines 单轴试验机检验用标准测力仪的校准 |
China National Standards calibration |
English PDF |
GB/T 10628-2008 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures 气体分析 校准混合气组成的测定和校验 比较法 |
China National Standards calibration |
English PDF |
GB/T 27025-2008 |
General requirements for the competence of testing and calibration laboratories 检测和校准实验室能力的通用要求 |
China National Standards calibration |
English PDF |
GB/T 21699-2008 |
Verification/calibration method of rotating-element current meters in straight open tank 直线明槽中的转子式流速仪检定/校准方法 |
China National Standards calibration |
English PDF |
GB/T 21540-2008 |
Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation 液压传动 液体在线自动颗粒计数系统 校准和验证方法 |
China National Standards calibration |
English PDF |
GB/T 20485.22-2008 |
Methods for the calibration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第 22部分:冲击比较法校准 |
China National Standards calibration |
English PDF |
GB/T 20485.12-2008 |
Methods for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method 振动与冲击传感器校准方法 第12部分:互易法振动绝对校准 |
China National Standards calibration |
English PDF |
GB/T 20485.1-2008 |
Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts 振动与冲击传感器校准方法 第1部分: 基本概念 |
China National Standards calibration |
English PDF |
GB/T 6113.105-2008 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz~1000MHz天线校准用试验场地 |
China National Standards calibration |
English PDF |
GB/T 4854.8-2007 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tone and circumaural earphones 声学 校准测听设备的基准零级 第8部分:耳罩式耳机纯音基准等效阈声压级 |
China National Standards calibration |
English PDF |
GB/T 21190-2007 |
Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment 纸、纸板和瓦楞纸板 压力试验仪的描述与校准 |
China National Standards calibration |
English PDF |
GB/T 20485.21-2007 |
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第21部分:振动比较法校准 |
China National Standards calibration |
English PDF |
GB/T 20485.13-2007 |
Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry 振动与冲击传感器校准方法 第13部分: 激光干涉法冲击绝对校准 |
China National Standards calibration |
English PDF |
GB/T 20485.11-2006 |
Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry 振动与冲击传感器校准方法 第11部分:激光干涉法振动绝对校准 |
China National Standards calibration |
English PDF |
GB/T 20131-2006 |
calibration and usage of α/β gas proportional counters α/β流气式正比计数器的标定和使用 |
China National Standards calibration |
English PDF |
GB/T 19801-2005 |
Non-destructive testing-Acoustic emission inspection-Secondary calibration of acoustic emission sensors 无损检测 声发射检测 声发射传感器的二级校准 |
China National Standards calibration |
English PDF |
GB/T 19800-2005 |
Non-destructive testing-Acoustic emission inspection-Primary calibration of transducers 无损检测 声发射检测 换能器的一级校准 |
China National Standards calibration |
English PDF |
GB/T 19799.1-2005 |
Non-destructive testing-Ultrasonic testing-calibration block No.1 无损检测 超声检测 1 号校准试块 |
China National Standards calibration |
English PDF |
GB/T 19780-2005 |
Capacity calibration of spherical metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards calibration |
English PDF |
GB/T 10248-2005 |
Gas analysis-Preparation of calibration gas mixtures-Static volumetric methods 气体分析 校准用混合气体的制备 静态体积法 |
China National Standards calibration |
English PDF |
GB/T 15000.9-2004 |
Directives for the work of reference materials(9)--calibration in analytical chemistry and use of certified reference materials 标准样品工作导则(9) 分析化学中的校准和有证标准样品的使用 |
China National Standards calibration |
English PDF |
GB/T 19600-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards calibration |
English PDF |
GB/T 18779.2-2004 |
Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南 |
China National Standards calibration |
English PDF |
GB/T 4854.1-2004 |
Acoustics--Reference zero for the calibration of audiometric equipment--Part1:Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones 声学 校准测听设备的基准零级 第1部分:压耳式耳机纯音基准等效阈声压级 |
China National Standards calibration |
English PDF |
GB/T 12162.3-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:calibration of area and personal dosemeters and the measurement of their response as a function of en 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第3部分:场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定 |
China National Standards calibration |
English PDF |
GB/T 4129-2003 |
Acoustics--Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels 声学 用于声功率级测定的标准声源的性能与校准要求 |
China National Standards calibration |
English PDF |
GB/T 18854-2002 |
Hydraulic fluid power--calibration of liquid automatic particle counters 液压传动 液体自动颗粒计数器的校准 |
China National Standards calibration |
English PDF |
GB/T 12160-2002 |
calibration of extensometers used in uniaxial testing 单轴试验用引伸计的标定 |
China National Standards calibration |
English PDF |
GB/T 18193-2000 |
Vacuum technology--Mass-spectrometer-type leak detector calibration 真空技术 质谱检漏仪校准 |
China National Standards calibration |
English PDF |
GB/T 4130-2000 |
Acoustics--Low frequency calibration methods of hydrophones 声学 水听器低频校准方法 |
China National Standards calibration |
English PDF |
GB/T 12128.2-1999 |
Reference sources for the calibration of surface contamination monitors--Part 2:Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV 用于校准表面污染监测仪的参考源 第2部分:能量低于0.15MeV的电子和能量低于1.5MeV的光子 |
China National Standards calibration |
English PDF |
GB/T 4854.4-1999 |
Acoustics--Reference zero for the calibration of audiometric equipment--Part 4:Reference levels for narrow-band masking noise 声学 校准测听设备的基准零级 第4部分:窄带掩蔽噪声的基准级 |
China National Standards calibration |
English PDF |
GB/T 17605-1998 |
Petroleum andliquid petroleum products--Volumetric calibration of horizontal cylindrical metal tanks(Manual methods) 石油和液体石油产品 卧式圆筒形金属油罐容积标定法(手工法) |
China National Standards calibration |
English PDF |
GB/T 17312-1998 |
Random-incidence and diffuse-field calibration of sound level meters 声级计的无规入射和扩散场校准 |
China National Standards calibration |
English PDF |
GB/T 4854.3-1998 |
Acoustics--Reference zero for the calibration of audiometric equipment--Part 3:Reference equivalent threshold force levels for pure tones and bone vibrators 声学 校准测听设备的基准零级 第3部分:骨振器纯音基准等效阈力级 |
China National Standards calibration |
English PDF |
GB/T 17251-1998 |
Acoustics--calibration method of hydrophone acceleration sensitivity 声学 水听器加速度灵敏度校准方法 |
China National Standards calibration |
English PDF |
GB/T 13823.17-1996 |
Methods for the calibration of vibration and shock pick-ups--Testing of acoustic sensitivity 振动与冲击传感器的校准方法 声灵敏度测试 |
China National Standards calibration |
English PDF |
GB/T 15863-1995 |
VHS 12.65mm VTR’s calibration tapes VHS型12.65 mm录像机校准带 |
China National Standards calibration |
English PDF |
GB/T 13235.3-1995 |
Petroleumand liquid petroleum products--Volumetric calibration of vertical cylindrical metal tanks--Electro-optical distance-ranging internal method 石油和液体石油产品立式圆筒形金属油罐容积标定法(光电内测距法) |
China National Standards calibration |
English PDF |
GB/T 13823.16-1995 |
Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison 振动与冲击传感器的校准方法 温度响应比较测试法 |
China National Standards calibration |
English PDF |
GB/T 13823.15-1995 |
Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法 |
China National Standards calibration |
English PDF |
GB/T 15611-1995 |
Acoustics--calibration of high frequency hydrophone 声学 高频水听器校准 |
China National Standards calibration |
English PDF |
GB/T 13823.14-1995 |
Methods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge 振动与冲击传感器的校准方法 离心机法一次校准 |
China National Standards calibration |
English PDF |
GB/T 13823.12-1995 |
Methods for the calibration of vibration and shock pick-ups--Resonance frequencytesting of undamped accelerometers on a steel block 振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试 |
China National Standards calibration |
English PDF |
Find out:215Items | To Page of: First -Previous-Next -Last | 1 2 |