Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43966-2024 |
General rules for high performance liquid chromatography - quadrupole inductively coupled plasma mass spectrometry combined method {译} 高效液相色谱-四极杆电感耦合等离子体质谱联用法通则 |
China National Standards combined |
 English PDF |
| GB/T 43968-2024 |
General rules for high performance liquid chromatography - atomic fluorescence spectrometer combined analysis methods {译} 高效液相色谱-原子荧光光谱仪联用分析方法通则 |
China National Standards combined |
English PDF |
| GB/T 43318-2023 |
Gas turbine combined cycle power plant thermal performance test {译} 燃气轮机联合循环电站 热力性能试验 |
China National Standards combined |
English PDF |
| GB/T 42808-2023 |
Technical Requirements for Electronic Data Interchange of Port-Sea-Rail combined Transport {译} 港口海铁联运电子数据交换技术要求 |
China National Standards combined |
English PDF |
| GB/T 42399.3-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: combined systems {译} 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 |
China National Standards combined |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment {译} 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards combined |
English PDF |
| GB/T 41602-2022 |
Food processing equipment combined equipment Rotary hot air oven {译} 饮食加工设备 组合型设备 旋转热风烤炉 |
China National Standards combined |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: combined test of low temperature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards combined |
English PDF |
| GB/T 18216.10-2022 |
Equipment for testing, measuring or monitoring electrical safety protection measures for low-voltage power distribution systems up to and including 1000 V AC and 1500 V DC Part 10: combined measuring equipment for testing, measuring or monitoring protecti {译} 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第10部分：用于防护措施的试验、测量或监控的组合测量设备 |
China National Standards combined |
English PDF |
| GB/T 3488.4-2022 |
Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases {译} 硬质合金 显微组织的金相测定 第4部分：孔隙度、非化合碳缺陷和脱碳相的金相测定 |
China National Standards combined |
English PDF |
| GB/T 40548-2021 |
Technical specification of separate layers pressure control and combined layers drainage for coalbed methane wells 煤层气井分层控压合层排采技术规范 |
China National Standards combined |
English PDF |
| GB/T 40433-2021 |
Technical specifications of combined power source for electric vehicles 电动汽车用混合电源技术要求 |
China National Standards combined |
English PDF |
| GB/T 40370-2021 |
Calculation methods for energy consumption index of gas-steam combined cycle cogeneration 燃气-蒸汽联合循环热电联产能耗指标计算方法 |
China National Standards combined |
English PDF |
| GB/T 14949.12-2021 |
Manganese ores - Determination of combined water content - Gravimetric method 锰矿石 化合水含量的测定 重量法 |
China National Standards combined |
English PDF |
| GB/T 39779-2021 |
Design guidelines for distributed energy system of combined cooling, heating and power 分布式冷热电能源系统设计导则 |
China National Standards combined |
English PDF |
| GB/T 25117-2020 |
Railway applications—Rolling stock—combined test method for traction systems 轨道交通 机车车辆 牵引系统组合试验方法 |
China National Standards combined |
English PDF |
| GB/T 22578.3-2020 |
Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors 电气绝缘系统(EIS) 液体和固体组件的热评定 第3部分：密封式电动机-压缩机 |
China National Standards combined |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards combined |
English PDF |
| GB/T 13319-2020 |
Geometrical product specifications (GPS)—Geometrical tolerancing—Pattern and combined geometrical specification 产品几何技术规范（GPS） 几何公差 成组（要素）与组合几何规范 |
China National Standards combined |
English PDF |
| GB/T 23755-2020 |
Three-phase site-combined power transformer 三相组合式电力变压器 |
China National Standards combined |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards combined |
English PDF |
| GB/T 37679-2019 |
Sheet metal parts fabricated by fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards combined |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards combined |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards combined |
English PDF |
| GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分：温度、振动(正弦)综合试验设备 |
China National Standards combined |
English PDF |
| GB/T 51311-2018 |
Wind and light storage combined power station commissioning and acceptance criteria 风光储联合发电站调试及验收标准 |
China National Standards combined |
English PDF |
| GB/T 36160.1-2018 |
Technical specification for distributed energy system of combined cooling, heating and power—Part 1：Refrigeration and heating subsystem 分布式冷热电能源系统技术条件 第1部分：制冷和供热单元 |
China National Standards combined |
English PDF |
| GB/T 36160.2-2018 |
Technical specification for distributed energy system of combined cooling，heating and power－Part 2：Power subsystem 分布式冷热电能源系统技术条件 第2部分：动力单元 |
China National Standards combined |
English PDF |
| GB/T 8013.2-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2: combined coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分:阳极氧化复合膜 |
China National Standards combined |
English PDF |
| GB/T 5591.3-2018 |
combined flexible materials for electrical insulation—Part 3：Specifications for individual materials 电气绝缘用柔软复合材料 第3部分：单项材料规范 |
China National Standards combined |
English PDF |
| GB/T 36372-2018 |
Cleanrooms and associated controlled environments—General technical requirements of combined envelope structure 洁净室及相关受控环境 组合式围护结构通用技术要求 |
China National Standards combined |
English PDF |
| GB/T 4937.201-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat 半导体器件 机械和气候试验方法 第20-1部分：对潮湿和焊接热综合影响敏感的表面安装器件的操作、包装、标志和运输 |
China National Standards combined |
English PDF |
| GB/T 4937.20-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat 半导体器件 机械和气候试验方法 第20部分：塑封表面安装器件耐潮湿和焊接热综合影响 |
China National Standards combined |
English PDF |
| GB/T 5591.2-2017 |
combined flexible materials for electrical insulation—Part 2: Methods of test 电气绝缘用柔软复合材料 第2部分：试验方法 |
China National Standards combined |
English PDF |
| GB/T 5591.1-2017 |
combined flexible materials for electrical insulation—Part 1: Definitions and general requirements 电气绝缘用柔软复合材料 第1部分：定义和一般要求 |
China National Standards combined |
English PDF |
| GB/T 34576-2017 |
Specifications for steam turbine used in gas-steam combined-cycle unit 燃气-蒸汽联合循环用汽轮机规范 |
China National Standards combined |
English PDF |
| GB/T 15670.28-2017 |
Toxicological test methods for pesticides registration—Part 28: combined chronic toxicity/carcinogenicity study 农药登记毒理学试验方法 第28部分：慢性毒性与致癌合并试验 |
China National Standards combined |
English PDF |
| GB/T 33857-2017 |
General principles for energy conservation assessment—combined heat and power generation project 节能评估技术导则 热电联产项目 |
China National Standards combined |
English PDF |
| GB/T 33757.1-2017 |
Energy saving ratio for distributed energy systems of combined cooling, heating and power—Part 1:Fossil energy driven systems 分布式冷热电能源系统的节能率 第1部分：化石能源驱动系统 |
China National Standards combined |
English PDF |
| GB/T 22578.1-2017 |
Electrical insulation systems (EIS)—Thermal evaluaion of combined liquid and solid components—Part 1: General requiremnts 电气绝缘系统（EIS） 液体和固体组件的热评定 第1部分：通用要求 |
China National Standards combined |
English PDF |
| GB 35574-2017 |
The norm of energy consumption per unit product of combined heat and power generation 热电联产单位产品能源消耗限额 |
China National Standards combined |
English PDF |
| GB/T 22578.2-2017 |
Electrical insulation system(EIS)—Thermal evaluation of combined liquid and solid components—Part 2: Simplified test 电气绝缘系统(EIS) 液体和固体组件的热评定 第2部分：简化试验 |
China National Standards combined |
English PDF |
| GB/T 5170.10-2017 |
Inspection methods for environmental testing equipments—Part 10：combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 |
China National Standards combined |
English PDF |
| GB 51131-2016 |
Technical code for gas-fired combined cooling heating and power engineering 燃气冷热电联供工程技术规范 |
China National Standards combined |
English PDF |
| GB/T 3489-2015 |
Hardmetals—Metallographic determination of porosity and uncombined carbon 硬质合金 孔隙度和非化合碳的金相测定 |
China National Standards combined |
English PDF |
| GB 20840.4-2015 |
Instrument transformers—Part 4：Additional requirements for combined transformers 互感器 第4部分：组合互感器的补充技术要求 |
China National Standards combined |
English PDF |
| GB/T 16643-2015 |
Rolling bearings—combined needle roller thrust roller bearings—Boundary dimensions 滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸 |
China National Standards combined |
English PDF |
| GB/T 30731-2014 |
Specifications of combined equipment for coal sample preparation 煤炭联合制样系统技术条件 |
China National Standards combined |
English PDF |
| GB/T 30577-2014 |
Specification of heat recovery steam generator for combined-cycle for gas-steam 燃气―蒸汽联合循环余热锅炉技术条件 |
China National Standards combined |
English PDF |
| GB 50973-2014 |
Code for construction and quality acceptance of gas turbine of combined cycle unit 联合循环机组燃气轮机施工及质量验收规范 |
China National Standards combined |
English PDF |
| GB/T 30344-2013 |
Operational norms of rail-sea combined transportation for international freight forwarders 国际货运代理铁海联运作业规范 |
China National Standards combined |
English PDF |
| GB/T 30343-2013 |
Operational norms of sea-rail combined transportation for international freight forwarders 国际货运代理海铁联运作业规范 |
China National Standards combined |
English PDF |
| GB/T 30092-2013 |
Metal bellows compensator used in high voltage combined electrical appliance 高压组合电器用金属波纹管补偿器 |
China National Standards combined |
English PDF |
| GB/T 29535-2013 |
Technological design principle for combined warm-cold forging process 温锻冷锻联合成形工艺 工艺编制原则 |
China National Standards combined |
English PDF |
| GB/T 29534-2013 |
General specifications of combined warm-cold forging parts 温锻冷锻联合成形锻件 通用技术条件 |
China National Standards combined |
English PDF |
| GB/T 29005-2012 |
The combined rice mill - Evaluation index and measurement methods for electrical energy consumption 组合米机 耗电量指标及测量方法 |
China National Standards combined |
English PDF |
| GB/T 27664.3-2012 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: combined equipment 无损检测 超声检测设备的性能与检验 第3部分：组合设备 |
China National Standards combined |
English PDF |
| GB/T 14598.303-2011 |
General specification for digital motor combined protection equipment 数字式电动机综合保护装置通用技术条件 |
China National Standards combined |
English PDF |
| GB/T 27500-2011 |
combined glass electrodes for the measurement of pH value pH值测定用复合玻璃电极 |
China National Standards combined |
English PDF |
| GB/T 12085.21-2011 |
Optics and optical instruments - Environmental test methods - Part 21: combined low pressure and ambient temperature or dry heat 光学和光学仪器 环境试验方法 第21部分：低压与大气温度、高温综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.19-2011 |
Optics and optical instruments - Environmental test methods - Part 19: combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第19部分：温度周期与正弦振动、随机振动综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.17-2011 |
Optics and optical instruments - Environmental test methods - Part 17: combined contamination, solar radiation 光学和光学仪器 环境试验方法 第17部分 污染、太阳辐射综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.18-2011 |
Optics and optical instruments - Environmental test methods - Part 18: combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第18部分：湿热、低内压综合试验 |
China National Standards combined |
English PDF |
| GB/T 26170-2010 |
Electrical insulation systems - Short-time evaluation of combined thermal and electrical stresses 电气绝缘系统 热、电综合应力快速评定 |
China National Standards combined |
English PDF |
| GB/T 12085.5-2010 |
Optics and optical instruments - Environmental test methods - Part 5: combined cold, low air pressure 光学和光学仪器 环境试验方法 第5部分：低温、低气压综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.16-2010 |
Optics and optical instruments - Environmental test methods - Part 16: combined bounce or steady-state acceleration and dry heat or cold 光学和光学仪器 环境试验方法 第16部分：弹跳或恒加速度与高温、低温综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.15-2010 |
Optics and optical instruments - Environmental test methods - Part 15: combined digitally controlled broad-band random vibration and dry heat or cold 光学和光学仪器 环境试验方法 第15部分：宽带随机振动(数字控制)与高温、低温综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.13-2010 |
Optics and optical instruments - Environmental test methods - Part 13: combined shock, bump or free fall and dry heat or cold 光学和光学仪器 环境试验方法 第13部分：冲击、碰撞或自由跌落与高温、低温综合试验 |
China National Standards combined |
English PDF |
| GB/T 12085.10-2010 |
Optics and optical instruments - Environmental test methods - Part 10: combined sinusoidal vibration and dry heat or cold 光学和光学仪器 环境试验方法 第10部分：振动(正弦)与高温、低温综合试验 |
China National Standards combined |
English PDF |
| GB/T 25768-2010 |
Rolling bearings - combined needle roller bearings with double direction thrust cylindrical roller bearings 滚动轴承 滚针和双向推力圆柱滚子组合轴承 |
China National Standards combined |
English PDF |
| GB/T 25761-2010 |
Rolling bearings - combined needle roller bearings with angular contact ball bearings - Boundary dimensions 滚动轴承 滚针和角接触球组合轴承 外形尺寸 |
China National Standards combined |
English PDF |
| GB/T 25760-2010 |
Rolling bearings - combined needle roller bearings with thrust ball bearings - Boundary dimensions 滚动轴承 滚针和推力球组合轴承 外形尺寸 |
China National Standards combined |
English PDF |
| GB/T 14506.2-2010 |
Methods for chemical analysis of silicate rocks - Part 2: Determination of combined water content 硅酸盐岩石化学分析方法 第2部分：化合水量测定 |
China National Standards combined |
English PDF |
| GB/T 25235-2010 |
Grain and oil machinery - combined separator 粮油机械 组合清理筛 |
China National Standards combined |
English PDF |
| GB/T 25117.3-2010 |
Railway applications - Rolling stock - combined testing - Part 3: Combined testing of alternating current motors,fed by an indirect converter,and their control system 轨道交通 机车车辆 组合试验 第3部分：间接变流器供电的交流电动机及其控制系统的组合试验 |
China National Standards combined |
English PDF |
| GB/T 25117.2-2010 |
Railway applications - Rolling stock - combined testing - Part 2: Combined testing of chopper-fed direct current traction motors and their control system 轨道交通 机车车辆 组合试验 第2部分：斩波器供电的直流牵引电动机及其控制系统的组合试验 |
China National Standards combined |
English PDF |
| GB/T 25117.1-2010 |
Railway applications - Rolling stock - combined testing - Part 1: Combined testing of inverter-fed alternating current motors and their control system 轨道交通 机车车辆 组合试验 第1部分：逆变器供电的交流电动机及其控制系统的组合试验 |
China National Standards combined |
English PDF |
| GB/T 24190-2009 |
Iron ores - Determination of combined water - Karl Fischer method 铁矿石 化合水含量的测定 卡尔费休滴定法 |
China National Standards combined |
English PDF |
| GB/T 23755-2009 |
Three-phase site-combined power transformers 三相组合式电力变压器 |
China National Standards combined |
English PDF |
| GB 10408.6-2009 |
combined passive infrared and microwave detector 微波和被动红外复合入侵探测器 |
China National Standards combined |
English PDF |
| GB/T 2423.59-2008 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: combined temperature(cold and heat)/low air pressure/vibration（random） 电工电子产品环境试验 第2部分：试验方法 试验Z/ABMFh：温度（低温、高温）/低气压/振动（随机）综合 |
China National Standards combined |
English PDF |
| GB/T 2423.26-2008 |
Environmental testing - Part 2: Tests methods - Test Z/BM: combined dry heat/low air pressure tests 电工电子产品环境试验 第2部分：试验方法 试验Z/BM：高温/低气压综合试验 |
China National Standards combined |
English PDF |
| GB/T 2423.25-2008 |
Environmental testing - Part 2: Tests methods - Test Z/AM: combined cold/low air pressure tests 电工电子产品环境试验 第2部分：试验方法 试验Z/AM：低温/低气压综合试验 |
China National Standards combined |
English PDF |
| GB/T 2424.15-2008 |
Environmental testing - Guide for combined temperature/low air pressure tests 电工电子产品环境试验 第3部分：温度/低气压综合试验导则 |
China National Standards combined |
English PDF |
| GB/T 22578.1-2008 |
Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements 电气绝缘系统(EIS) 液体和固体组件的热评定 第1 部分：通用要求 |
China National Standards combined |
English PDF |
| GB/T 5591.3-2008 |
combined flexible materials for electrical insulation - Part 3: Specifications for individual materials 电气绝缘用柔软复合材料 第3部分：单项材料规范 |
China National Standards combined |
English PDF |
| GB/T 5170.10-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - combined high and low temperature/low air pressure testing equipments 电工电子产品环境试验设备检验方法 高低温低气压试验设备 |
China National Standards combined |
English PDF |
| GB/T 2423.102-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal） 电工电子产品环境试验 第2部分：试验方法 试验：温度（低温、高温）/低气压/振动（正弦）综合 |
China National Standards combined |
English PDF |
| GB/T 12722-2008 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test（half-omega test） 橡胶和塑料软管组合件 液压脉冲曲挠试验（半Ω试验） |
China National Standards combined |
English PDF |
| GB/T 21788-2008 |
Chemicals - Test method of combined chronic toxicity/carcinogenicity study 化学品 慢性毒性与致癌性联合试验方法 |
China National Standards combined |
English PDF |
| GB/T 21771-2008 |
Chemicals - Test method of combined repeated dose toxicity study with the reproduction/developmental toxicity screening 化学品 重复剂量毒性合并生殖/发育毒性筛选试验方法 |
China National Standards combined |
English PDF |
| GB/T 7673.4-2008 |
Paper covered wires - Part 4: Paper covered combined conductors 纸包绕组线 第4部分: 纸绝缘组合导线 |
China National Standards combined |
English PDF |
| GB/T 17948.5-2007 |
Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functinal evaluation - Endurance under combined thermal and electrical stresses of insulation system used in machines up to 旋转电机绝缘结构功能性评定 成型绕组试验规程 多因子功能性评定 50MVA、15kV及以下电机绝缘结构热、电综合应力耐久性 |
China National Standards combined |
English PDF |
| GB 17201-2007 |
combined instrument transformers 组合互感器 |
China National Standards combined |
English PDF |
| GB/T 8013.2-2007 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 2: combined anodic oxide coating 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分：阳极氧化复合膜 |
China National Standards combined |
English PDF |
| GB/T 5170.19-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 |
China National Standards combined |
English PDF |
| GB/T 5170.17-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
China National Standards combined |
English PDF |
| GB/T 2423.36-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/BFc:combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/BFc：散热和非散热试验样品的高温/振动(正弦)综合试验 |
China National Standards combined |
English PDF |
| GB/T 2423.35-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/AFc：散热和非散热试验样品的低温/振动(正弦)综合试验 |
China National Standards combined |
English PDF |
| GB/T 2423.27-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验 第2部分：试验方法 试验Z/AMD：低温/低气压/湿热连续综合试验 |
China National Standards combined |
English PDF |
| GB 13960.13-2005 |
Safety of transportable motor-operated electric tool-Part2:Particular requirements for combined mitre-bench saws 可移式电动工具的安全 第二部分:斜切割台式组合锯的专用要求 |
China National Standards combined |
English PDF |
| GB/T 18929-2002 |
Acceptance tests for combined-cycle power plants 联合循环发电装置 验收试验 |
China National Standards combined |
English PDF |
| GB/T 5591.2-2002 |
combined flexible materials for electrical insulation--Part 2:Methods for test 电气绝缘用柔软复合材料 第2部分:试验方法 |
China National Standards combined |
English PDF |
| GB/T 5591.1-2002 |
combined flexible materials for electrical insulation--Part 1:Definitions and general requirements 电气绝缘用柔软复合材料 第1部分:定义和一般要求 |
China National Standards combined |
English PDF |
| GB/T 223.74-1997 |
Methods for chemical analysis of iron，steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content 钢铁及合金化学分析方法 非化合碳含量的测定 |
China National Standards combined |
English PDF |
| GB/T 16643-1996 |
Rolling bearings--combined needle roller thrust roller bearings--Boundary dimensions 滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸 |
China National Standards combined |
English PDF |
| GB 16392-1996 |
Diagnostic criteria and principles of management for combined radiation-burn injury 放烧复合伤诊断标准及处理原则 |
China National Standards combined |
English PDF |
| GB 16391-1996 |
Diagnostic criteria and principles of management for combined radiation-blast injury 放冲复合伤诊断标准及处理原则 |
China National Standards combined |
English PDF |
| GB/T 14949.12-1994 |
Manganese ores--Determination of combined water content 锰矿石化学分析方法 化合水量的测定 |
China National Standards combined |
English PDF |
| GB/T 14896.5-1994 |
Non-traditional machine tools--Terminology--combined machining machine tools 特种加工机床 术语 复合加工机床 |
China National Standards combined |
English PDF |
| GB/T 2424.22-1986 |
Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests 电工电子产品基本环境试验规程 温度(低温、高温)和振动 (正弦) 综合试验导则 |
China National Standards combined |
English PDF |
| GB/T 3489-1983 |
Hardmetals--Metallographic determination of porosity and uncombined carbon 硬质合金 孔隙度和非化合碳的金相测定 |
China National Standards combined |
English PDF |
| Find out:113Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
