Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mechanical properties tests {译} 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards conditions |
 English PDF |
| GB/T 24977-2024 |
General technical conditions for bathroom furniture {译} 卫浴家具通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 28478-2024 |
General technical conditions for outdoor furniture - tables and chairs {译} 户外家具-桌椅类通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 24820-2024 |
General technical conditions for laboratory furniture {译} 实验室家具通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 22581-2024 |
Basic technical conditions for mixed flow pump-turbines {译} 混流式水泵水轮机基本技术条件 |
China National Standards conditions |
English PDF |
| GB/T 44040-2024 |
Measurement methods for external noise of heavy-duty vehicles in multi-operating conditions {译} 重型汽车多工况行驶车外噪声测量方法 |
China National Standards conditions |
English PDF |
| GB/T 34877.4-2024 |
Industrial fans-Determination of sound power level of fans under standard laboratory conditions-Part 4: Sound intensity method {译} 工业风机-标准实验室条件下风机声功率级的测定-第4部分：声强法 |
China National Standards conditions |
English PDF |
| GB-14102.1-2024 |
Fire shutters - Part 1: General technical conditions {译} 防火卷帘-第1部分：通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 19544-2024 |
Classification and general technical conditions of spinal orthotics {译} 脊柱矫形器的分类及通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 19960-2024 |
Wind power generation system - General technical conditions and test methods for wind turbines {译} 风能发电系统-风力发电机组通用技术条件和试验方法 |
China National Standards conditions |
English PDF |
| GB/T 20340.1-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 1: Design safety, test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第1部分：设计安全、试验方法和验收条件 |
China National Standards conditions |
English PDF |
| GB/T 20340.2-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 2: Application safety, test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第2部分：应用安全、试验方法和验收条件 |
China National Standards conditions |
English PDF |
| GB/T 20790-2024 |
Semi-feed combine harvesters - Technical conditions {译} 半喂入联合收割机-技术条件 |
China National Standards conditions |
English PDF |
| GB/T 4797.3-2024 |
Classification of environmental conditions - Natural environmental conditions - Part 3: Biological {译} 环境条件分类-自然环境条件-第3部分：生物 |
China National Standards conditions |
English PDF |
| GB/T 20625-2024 |
Special environmental conditions - terminology {译} 特殊环境条件-术语 |
China National Standards conditions |
English PDF |
| GB/T 5856-2024 |
Artificial board machinery-General technical conditions for hot presses {译} 人造板机械-热压机通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 18262-2024 |
Artificial board machinery-General technical conditions {译} 人造板机械-通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 31258-2024 |
General technical conditions for zip lines {译} 滑索通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43829-2024 |
Telecontrol equipment and systems-Part 2: Working conditions-Part 1: Power supply and electromagnetic compatibility {译} 农村粪污集中处理设施建设与管理规范 |
China National Standards conditions |
English PDF |
| GB/T 43766-2024 |
Technical conditions for safety test environment of intelligent networked vehicles-Part 1: Public roads {译} 智能网联汽车运行安全测试技术要求 |
China National Standards conditions |
English PDF |
| GB/T 43690-2024 |
General technical conditions for brushless DC torque motors {译} 成像衍射光学元件衍射效率的测量方法 |
China National Standards conditions |
English PDF |
| GB/T 37400.18-2023 |
General technical conditions for heavy machinery Part 18: Open gear transmission system {译} 重型机械通用技术条件 第18部分：开式齿轮传动系统 |
China National Standards conditions |
English PDF |
| GB/T 36558-2023 |
General technical conditions for electrochemical energy storage systems in power systems {译} 电力系统电化学储能系统通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 34877.2-2023 |
Industrial fans - Determination of fan sound power levels under standard laboratory conditions - Part 2: Reverberation chamber method {译} 工业风机 标准实验室条件下风机声功率级的测定 第2部分：混响室法 |
China National Standards conditions |
English PDF |
| GB/T 34877.1-2023 |
Industrial fans - Determination of fan sound power levels under standard laboratory conditions - Part 1: General requirements {译} 工业风机 标准实验室条件下风机声功率级的测定 第1部分：通用要求 |
China National Standards conditions |
English PDF |
| GB/T 30958-2023 |
Livestock and poultry slaughtering and processing equipment Technical conditions for pig slaughtering equipment {译} 畜禽屠宰加工设备 猪屠宰成套设备技术条件 |
China National Standards conditions |
English PDF |
| GB/T 16462.2-2023 |
Inspection conditions for CNC lathes and turning centers Part 2: Inspection of geometric accuracy of vertical machine tools {译} 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards conditions |
English PDF |
| GB/T 16462.1-2023 |
Inspection conditions for CNC lathes and turning centers Part 1: Inspection of geometric accuracy of horizontal machine tools {译} 数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验 |
China National Standards conditions |
English PDF |
| GB/T 10739-2023 |
Paper, paperboard and pulp Standard atmospheric conditions for specimen handling and testing {译} 纸、纸板和纸浆 试样处理和试验的标准大气条件 |
China National Standards conditions |
English PDF |
| GB/T 10067.101-2023 |
Basic technical conditions for electrothermal and electromagnetic treatment devices Part 101: General requirements for vacuum electrothermal and electromagnetic treatment devices {译} 电热和电磁处理装置基本技术条件 第101部分：真空电热和电磁处理装置的通用要求 |
China National Standards conditions |
English PDF |
| GB/T 10067.6-2023 |
Basic technical conditions for electrothermal and electromagnetic treatment devices Part 6: Industrial microwave heating devices {译} 电热和电磁处理装置基本技术条件 第6部分：工业微波加热装置 |
China National Standards conditions |
English PDF |
| GB/Z 17624.7-2023 |
Electromagnetic compatibility Overview Part 7: Power factor of single-phase systems under non-sinusoidal conditions {译} 电磁兼容 综述 第7部分：非正弦条件下单相系统的功率因数 |
China National Standards conditions |
English PDF |
| GB/Z 41305.7-2023 |
Environmental conditions Vibration and shock of electronic equipment Part 7: Transport by rotorcraft {译} 环境条件 电子设备振动和冲击 第7部分：利用旋翼飞机运输 |
China National Standards conditions |
English PDF |
| GB/T 9089.3-2023 |
Electrical installations under severe outdoor conditions Part 3: General requirements for equipment and accessories {译} 户外严酷条件下的电气设施 第3部分：设备及附件的一般要求 |
China National Standards conditions |
English PDF |
| GB/T 43298-2023 |
General technical conditions for vacuum drainage integrated equipment {译} 真空排水集成设备通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards conditions |
English PDF |
| GB/T 43287-2023 |
Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译} 塑料 在实际野外条件海洋环境中塑料材料崩解度的测定 |
China National Standards conditions |
English PDF |
| GB/T 23802-2023 |
Technical delivery conditions for corrosion-resistant alloy seamless pipes for casing, tubing, coupling blanks and accessory materials for the oil and gas industry {译} 石油天然气工业 套管、油管、接箍毛坯及附件材料用耐蚀合金无缝管交货技术条件 |
China National Standards conditions |
English PDF |
| GB/T 12940-2023 |
Silver graphite electrical contacts technical conditions {译} 银石墨电触头技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43411-2023 |
Electron beam selective melting additive manufacturing machine tools general technical conditions {译} 电子束选区熔化增材制造机床 通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43336-2023 |
General technical conditions for steering wheel control systems {译} 舵轮控制系统通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 26990-2023 |
Fuel cell electric vehicle on-board hydrogen system technical conditions {译} 燃料电池电动汽车 车载氢系统技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43346-2023 |
Technical conditions for starting and stopping the use of lead-acid batteries {译} 起停用铅酸蓄电池 技术条件 |
China National Standards conditions |
English PDF |
| GB/T 5008.1-2023 |
Lead-acid batteries for starting use Part 1: Technical conditions and test methods {译} 起动用铅酸蓄电池 第1部分：技术条件和试验方法 |
China National Standards conditions |
English PDF |
| GB/T 14713-2023 |
General technical conditions for rotary cutting machines {译} 旋切机通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 15548-2023 |
General technical conditions for three-phase synchronous generators driven by reciprocating internal combustion engines {译} 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards conditions |
English PDF |
| GB 43049-2023 |
Continuous casting machine safety technical conditions {译} 连铸机安全技术条件 |
China National Standards conditions |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data {译} 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards conditions |
English PDF |
| GB/T 43141-2023 |
Laser Additive Manufacturing Machine Tools General Technical conditions {译} 激光增材制造机床 通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 43117-2023 |
Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions {译} 玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定 |
China National Standards conditions |
English PDF |
| GB/T 43096-2023 |
Metal powders. Determination of external specific surface area by powder layer permeability test under steady flow conditions. {译} 金属粉末 稳态流动条件下粉末层透过性试验测定外比表面积 |
China National Standards conditions |
English PDF |
| GB/T 42968.1-2023 |
Integrated circuits - Electromagnetic immunity measurements - Part 1: General conditions and definitions {译} 集成电路 电磁抗扰度测量 第1部分：通用条件和定义 |
China National Standards conditions |
English PDF |
| GB/T 34667-2023 |
General technical conditions for electric balancing vehicles {译} 电动平衡车通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 23337-2023 |
Internal combustion engine intake and exhaust valves technical conditions {译} 内燃机 进、排气门 技术条件 |
China National Standards conditions |
English PDF |
| GB/T 23288-2023 |
General technical conditions for wooden urns {译} 木质骨灰盒通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 16739.2-2023 |
Business conditions for automobile maintenance industry Part 2: Comprehensive minor repair and special maintenance of automobiles {译} 汽车维修业经营业务条件 第2部分：汽车综合小修及专项维修业户 |
China National Standards conditions |
English PDF |
| GB/T 16739.1-2023 |
Business conditions for automobile repair industry Part 1: Complete automobile repair enterprises {译} 汽车维修业经营业务条件 第1部分：汽车整车维修企业 |
China National Standards conditions |
English PDF |
| GB/T 12974.2-2023 |
General technical conditions for AC elevator motors Part 2: Permanent magnet synchronous motors {译} 交流电梯电动机通用技术条件 第2部分：永磁同步电动机 |
China National Standards conditions |
English PDF |
| GB/T 12974.1-2023 |
General technical conditions for AC elevator motors Part 1: Three-phase asynchronous motors {译} 交流电梯电动机通用技术条件 第1部分：三相异步电动机 |
China National Standards conditions |
English PDF |
| GB/T 12758-2023 |
General technical conditions for urban rail transit signaling systems {译} 城市轨道交通信号系统通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 10058-2023 |
Elevator technical conditions {译} 电梯技术条件 |
China National Standards conditions |
English PDF |
| GB/T 42831-2023 |
General technical conditions for guided service robots {译} 导引服务机器人 通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 24748-2023 |
Reciprocating internal combustion engine flywheel technical conditions {译} 往复式内燃机 飞轮 技术条件 |
China National Standards conditions |
English PDF |
| GB/T 42868-2023 |
Technical conditions of ship's gray water reuse treatment device {译} 船舶中水回用处理装置技术条件 |
China National Standards conditions |
English PDF |
| GB/T 12918-2023 |
Technical conditions for oil tanker oil discharge monitoring system {译} 油船排油监控系统技术条件 |
China National Standards conditions |
English PDF |
| GB/T 10833-2023 |
Technical conditions of marine domestic sewage treatment system {译} 船用生活污水处理系统技术条件 |
China National Standards conditions |
English PDF |
| GB/T 17421.1-2023 |
General principles for inspection of machine tools Part 1: Geometric accuracy of machine tools under no-load or quasi-static conditions {译} 机床检验通则 第1部分：在无负荷或准静态条件下机床的几何精度 |
China National Standards conditions |
English PDF |
| GB/T 14092.2-2023 |
Environmental conditions for mechanical products - Part 2: Cold {译} 机械产品环境条件 第2部分：寒冷 |
China National Standards conditions |
English PDF |
| GB/T 14092.1-2023 |
Environmental conditions for mechanical products - Part 1: Damp heat {译} 机械产品环境条件 第1部分：湿热 |
China National Standards conditions |
English PDF |
| GB/T 42764-2023 |
Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements {译} 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 |
China National Standards conditions |
English PDF |
| GB/T 24747-2023 |
Organic heat transfer material safety technical conditions {译} 有机热载体安全技术条件 |
China National Standards conditions |
English PDF |
| GB/T 4798.4-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity levels Part 4: Stationary use in places without weather protection {译} 环境条件分类 环境参数组分类及其严酷程度分级 第4部分：无气候防护场所固定使用 |
China National Standards conditions |
English PDF |
| GB/T 4798.3-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 3: Stationary use in places with weather protection {译} 环境条件分类 环境参数组分类及其严酷程度分级 第3部分：有气候防护场所固定使用 |
China National Standards conditions |
English PDF |
| GB/T 9089.2-2023 |
Electrical installations under severe outdoor conditions - Part 2: General protection requirements {译} 户外严酷条件下的电气设施 第2部分：一般防护要求 |
China National Standards conditions |
English PDF |
| GB/T 42567.3-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters {译} 工业过程测量变送器试验的参比条件和程序 第3部分：温度变送器的特定程序 |
China National Standards conditions |
English PDF |
| GB/T 42567.2-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters {译} 工业过程测量变送器试验的参比条件和程序 第2部分：压力变送器的特定程序 |
China National Standards conditions |
English PDF |
| GB/T 42567.1-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters {译} 工业过程测量变送器试验的参比条件和程序 第1部分：所有类型变送器的通用程序 |
China National Standards conditions |
English PDF |
| GB/T 42613-2023 |
Plain bearings - Tests for bearing materials - Resistance to corrosion by lubricants under static conditions {译} 滑动轴承 轴承材料试验 静态条件下抗润滑剂腐蚀能力 |
China National Standards conditions |
English PDF |
| GB/T 24002.1-2023 |
Environmental management system - Application of GB/T 24001 Guidelines for managing environmental aspects and responding to environmental conditions for environmental subject areas - Part 1: General principles {译} 环境管理体系 针对环境主题领域应用 GB/T 24001管理环境因素和应对环境状况的指南 第1部分：通则 |
China National Standards conditions |
English PDF |
| GB/T 42368-2023 |
Method for Determination of Explosive Limits of Combustible Gas (Steam) under High Temperature and High Pressure conditions {译} 高温高压条件下可燃气体（蒸气）爆炸极限测定方法 |
China National Standards conditions |
English PDF |
| GB/T 10592-2023 |
High and low temperature test chamber technical conditions {译} 高低温试验箱技术条件 |
China National Standards conditions |
English PDF |
| GB/T 27874-2023 |
Technical conditions and evaluation methods for the use of marine energy-saving products {译} 船舶节能产品使用技术条件及评定方法 |
China National Standards conditions |
English PDF |
| GB/T 42393-2023 |
Method for drawing regional wind damage distribution map of power grid under high altitude micro-topography and micro-meteorological conditions {译} 高海拔微地形微气象条件下电网区域风害分布图绘制方法 |
China National Standards conditions |
English PDF |
| GB/Z 28820.4-2022 |
Long-term radiation aging of polymers - Part 4: Effect of different temperatures and dose rates under radiation conditions {译} 聚合物长期辐射老化 第4部分：辐射条件下不同温度和剂量率的影响 |
China National Standards conditions |
English PDF |
| GB/T 19608.2-2022 |
Classification of special environmental conditions Part 2: hot and dry desert {译} 特殊环境条件分级 第2部分：干热沙漠 |
China National Standards conditions |
English PDF |
| GB/T 19608.1-2022 |
Classification for special environmental conditions Part 1: Dry heat {译} 特殊环境条件分级 第1部分：干热 |
China National Standards conditions |
English PDF |
| GB/T 1040.2-2022 |
Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译} 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards conditions |
English PDF |
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions {译} 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards conditions |
English PDF |
| GB/T 41376-2022 |
General technical conditions for beer machinery {译} 啤酒机械通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 5336-2022 |
Auto body repair technical conditions {译} 汽车车身修理技术条件 |
China National Standards conditions |
English PDF |
| GB/T 23336-2022 |
General technical conditions for semi-trailers {译} 半挂车通用技术条件 |
China National Standards conditions |
English PDF |
| GB/Z 41305.2-2022 |
Environmental conditions - vibration and shock of electronic equipment - Part 2: storage and handling of equipment {译} 环境条件 电子设备振动和冲击 第2部分：设备的贮存和搬运 |
China National Standards conditions |
English PDF |
| GB/T 24114.1-2022 |
Mechanical and electrical equipment - digital control system for sewing machinery - Part 1: General technical conditions {译} 机械电气设备 缝制机械数字控制系统 第1部分：通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 18743.2-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 |
China National Standards conditions |
English PDF |
| GB/T 18380.34-2022 |
Fire tests of electric and optical cables under fire conditions - Part 34: vertical flame spread test for vertically mounted bunched wires and cables, class B {译} 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards conditions |
English PDF |
| GB/T 18380.33-2022 |
Fire tests of electric and optical cables under fire conditions - Part 33: vertical flame spread test for vertically mounted bunched wires and cables, class A {译} 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards conditions |
English PDF |
| GB/T 18380.32-2022 |
Fire tests of electric and optical cables under fire conditions - Part 32: vertical flame spread test for vertically mounted bunched wires and cables, class A, f / R {译} 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards conditions |
English PDF |
| GB/T 41415-2022 |
Textiles - Determination of dimensional change rate under dry, wet and hot conditions {译} 纺织品 干湿热条件下尺寸变化率的测定 |
China National Standards conditions |
English PDF |
| GB/T 18380.36-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards conditions |
English PDF |
| GB/T 18380.35-2022 |
Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards conditions |
English PDF |
| GB/T 18380.31-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards conditions |
English PDF |
| GB/T 18380.13-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落（物）/微粒的试验方法 |
China National Standards conditions |
English PDF |
| GB/T 18380.12-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame 电缆和光缆在火焰条件下的燃烧试验 第12部分：单根绝缘电线电缆火焰垂直蔓延试验 1 kW 预混合型火焰试验方法 |
China National Standards conditions |
English PDF |
| GB/T 18380.11-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第11部分：单根绝缘电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards conditions |
English PDF |
| GB/T 17951-2022 |
General technical conditions of hard magnetic materials 硬磁材料一般技术条件 |
China National Standards conditions |
English PDF |
| GB/T 42284.5-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 5: Chemical loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第5部分：化学负荷 |
China National Standards conditions |
English PDF |
| GB/T 42284.4-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 4: Climatic loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第4部分：气候负荷 |
China National Standards conditions |
English PDF |
| GB/T 42284.3-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 3: Mechanical loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第3部分：机械负荷 |
China National Standards conditions |
English PDF |
| GB/T 42284.1-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 1: General provisions {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第1部分：一般规定 |
China National Standards conditions |
English PDF |
| GB/T 42164-2022 |
Leather - Chemical tests - Determination of hexavalent chromium content under heat aging conditions {译} 皮革 化学试验 热老化条件下六价铬含量的测定 |
China National Standards conditions |
English PDF |
| GB/T 13957-2022 |
Technical conditions of basic series of large three-phase asynchronous motors {译} 大型三相异步电动机基本系列技术条件 |
China National Standards conditions |
English PDF |
| GB/T 42141-2022 |
Design criteria for radiation protection of nuclear island buildings under accident conditions in pressurized water reactor nuclear power plants {译} 压水堆核电厂事故工况核岛厂房辐射防护设计准则 |
China National Standards conditions |
English PDF |
| GB/T 42267-2022 |
Determination of compression set of flexible porous polymeric materials under wet conditions {译} 柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定 |
China National Standards conditions |
English PDF |
| GB/T 20626.3-2022 |
Special environmental conditions High altitude electrical and electronic products - Part 3: Protection requirements for lightning, pollution and condensation {译} 特殊环境条件 高原电工电子产品 第3部分：雷电、污秽、凝露的防护要求 |
China National Standards conditions |
English PDF |
| GB/T 22359.1-2022 |
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with built-in power supply - Part 1: General requirements for EMC under typical electromagnetic environmental conditions {译} 土方机械与建筑施工机械 内置电源机器的电磁兼容性（EMC） 第1部分：典型电磁环境条件下的EMC一般要求 |
China National Standards conditions |
English PDF |
| GB/T 40471-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of sheep and goat slaughtering equipment 畜禽屠宰加工设备 羊屠宰成套设备技术条件 |
China National Standards conditions |
English PDF |
| GB/T 40470-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of poultry slaughtering equipment 畜禽屠宰加工设备 禽屠宰成套设备技术条件 |
China National Standards conditions |
English PDF |
| GB/T 40469-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of cattle slaughtering equipment 畜禽屠宰加工设备 牛屠宰成套设备技术条件 |
China National Standards conditions |
English PDF |
| GB/T 40399-2021 |
General technical conditions for precast concrete part of prefabricated construction 装配式混凝土建筑用预制部品通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 33863.9-2021 |
OPC unified architecture—Part 9: Alarms and conditions OPC统一架构 第9部分：报警和条件 |
China National Standards conditions |
English PDF |
| GB/T 40277-2021 |
Paper,board and pulps—Measurement of diffuse blue reflectance factor(ISO brightness)—Indoor daylight conditions 纸、纸板和纸浆 蓝光漫反射因数（ISO亮度）的测定 室内日光条件 |
China National Standards conditions |
English PDF |
| GB/T 40118-2021 |
Plain bearings—Testing under conditions of hydrodynamic and mixed lubrication in test rigs 滑动轴承 流体动压和混合润滑条件台架试验 |
China National Standards conditions |
English PDF |
| GB/T 4798.2-2021 |
Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 2:Transportation and handling 环境条件分类 环境参数组分类及其严酷程度分级 第2部分：运输和装卸 |
China National Standards conditions |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards conditions |
English PDF |
| GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards conditions |
English PDF |
| GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards conditions |
English PDF |
| GB/T 12786-2021 |
General technical conditions for automatic internal combustion engine power stations 自动化内燃机电站通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 17651.2-2021 |
Measurement of smoke density of cables or optical fiber cables burning under defined conditions - Part 2: Test procedure and requirements 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分：试验程序和要求 |
China National Standards conditions |
English PDF |
| GB/T 17651.1-2021 |
Measurement of smoke density of cables or optical fiber cables burning under defined conditions-Part 1:Test apparatus 电缆或光缆在特定条件下燃烧的烟密度测定 第1部分：试验装置 |
China National Standards conditions |
English PDF |
| GB/T 17215.211-2021 |
Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 11：Metering equipment 电测量设备（交流） 通用要求、试验和试验条件 第11部分：测量设备 |
China National Standards conditions |
English PDF |
| GB/T 18400.10-2021 |
Test conditions for machining centres—Part 10：Evaluation of thermal distortions 加工中心检验条件 第10部分：热变形的评定 |
China National Standards conditions |
English PDF |
| GB/T 17215.221-2021 |
Electricity metering equipment(a. c. ) -- General requirements, tests and test conditions -- Part 21: Tariff and load control equipment 电测量设备（交流） 通用要求、试验和试验条件 第21部分：费率和负荷控制设备 |
China National Standards conditions |
English PDF |
| GB/T 4797.9-2021 |
Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use 环境条件分类 自然环境条件 贮存、运输和使用过程中测得的冲击和振动数据 |
China National Standards conditions |
English PDF |
| GB/T 22473.1-2021 |
Batteries used for energy storage -- Part 1: Photovoltaic off-grid application technical conditions 储能用蓄电池? 第1部分：光伏离网应用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 5289.2-2021 |
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle—Part 2：Machines with movable column and fixed table 卧式铣镗床精度检验条件 第2部分：带移动立柱和固定工作台的机床 |
China National Standards conditions |
English PDF |
| GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards conditions |
English PDF |
| GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards conditions |
English PDF |
| GB/T 40806-2021 |
Airborne noise emitted by machine tools—Operating conditions for metal-cutting machines 机床发射空气传播噪声 金属切削机床的操作条件 |
China National Standards conditions |
English PDF |
| GB/T 40860-2021 |
Analysis requirements for design extension conditions of pressurized water reactor nuclear power plants 压水堆核电厂设计扩展工况分析要求 |
China National Standards conditions |
English PDF |
| GB/T 40742.1-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 1:Basic concept and measurement—Symbol,terminology,measuring conditions and procedures 产品几何技术规范（GPS） 几何精度的检测与验证 第1部分：基本概念和测量基础 符号、术语、测量条件和程序 |
China National Standards conditions |
English PDF |
| GB/T 17215.231-2021 |
Electricity metering equipment(AC)—General requirements, tests and test conditions—Part 31:Product safety requirements and tests 电测量设备（交流） 通用要求、试验和试验条件 第31部分：产品安全要求和试验 |
China National Standards conditions |
English PDF |
| GB/T 3836.33-2021 |
Explosive atmospheres—Part 33：Equipment in adverse service conditions 爆炸性环境 第33部分：严酷工作条件用设备 |
China National Standards conditions |
English PDF |
| GB/T 40578-2021 |
Measurement methods for noise emitted by light-duty vehicles in multiple driving mode conditions 轻型汽车多工况行驶车外噪声测量方法 |
China National Standards conditions |
English PDF |
| GB/T 40673-2021 |
Timekeeping instruments—conditions for carrying out checks on radioluminescent deposits 计时仪器 辐射发光涂层检验条件 |
China National Standards conditions |
English PDF |
| GB/T 9089.1-2021 |
Electrical installations for outdoor sites under heavy conditions—Part 1: Vocabulary 户外严酷条件下的电气设施 第1部分：术语 |
China National Standards conditions |
English PDF |
| GB/T 39006-2020 |
Requirements and test methods of special climate conditions reliability for industrial robots 工业机器人特殊气候环境可靠性要求和测试方法 |
China National Standards conditions |
English PDF |
| GB/T 5097-2020 |
Non-destructive testing—Penetrant testing and magnetic particle testing—Viewing conditions 无损检测 渗透检测和磁粉检测 观察条件 |
China National Standards conditions |
English PDF |
| GB/T 24328.8-2020 |
Tissue paper and tissue products—Part 8: Determination of optical properties—Measurement of brightness and colour—D65/10°（outdoor daylight conditions) 卫生纸及其制品 第8部分：光学性能的测定 亮度和颜色的测定 D65/10°（室外日光条件） |
China National Standards conditions |
English PDF |
| GB/T 38761-2020 |
Geometrical product specifications (GPS)—Characteristics and conditions—Definitions 产品几何技术规范（GPS） 特征和条件 定义 |
China National Standards conditions |
English PDF |
| GB/T 39673.51-2020 |
Home and building electronic systems (HBES) and building automation and control systems (BACS) —Part 51: EMC requirements, conditions and test set-up 住宅和楼宇电子系统（HBES）及楼宇自动化和控制系统（BACS） 第51部分：EMC要求、条件和测试布置 |
China National Standards conditions |
English PDF |
| GB/T 20996.3-2020 |
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3: Dynamic conditions 采用电网换相换流器的高压直流系统的性能 第3部分：动态 |
China National Standards conditions |
English PDF |
| GB/T 20996.1-2020 |
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 1: Steady-state conditions 采用电网换相换流器的高压直流系统的性能 第1部分：稳态 |
China National Standards conditions |
English PDF |
| GB/T 39548-2020 |
Determination of retention rate on thermal resistance of vacuum insulation panels(VIP) in hygrothermal conditions 真空绝热板湿热条件下热阻保留率的测定 |
China National Standards conditions |
English PDF |
| GB/T 39613-2020 |
Specifications for quality inspection and acceptance of geographic conditions monitoring achievements 地理国情监测成果质量检查与验收 |
China National Standards conditions |
English PDF |
| GB/T 39275-2020 |
Power electronics systems and equipment—Operation conditions and characteristics of active infeed converter (AIC) applications 电力电子系统和设备 有源馈电变流器（AIC）应用的运行条件和特性 |
China National Standards conditions |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards conditions |
English PDF |
| GB/T 26218.4-2019 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4: Insulators for d.c. systems 污秽条件下使用的高压绝缘子的选择和尺寸确定 第4部分：直流系统用绝缘子 |
China National Standards conditions |
English PDF |
| GB/T 4797.4-2019 |
Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and temperature 环境条件分类 自然环境条件 太阳辐射与温度 |
China National Standards conditions |
English PDF |
| GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards conditions |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards conditions |
English PDF |
| GB/T 26218.4-2019 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4: Insulators for d.c. systems 污秽条件下使用的高压绝缘子的选择和尺寸确定 第4部分：直流系统用绝缘子 |
China National Standards conditions |
English PDF |
| GB/T 4797.4-2019 |
Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and temperature 环境条件分类 自然环境条件 太阳辐射与温度 |
China National Standards conditions |
English PDF |
| GB/T 4798.1-2019 |
Classification of environmental conditions—Classification of groups of environmental parameters and their severities Part1:—Storage 环境条件分类 环境参数组分类及其严酷程度分级 第1部分：贮存 |
China National Standards conditions |
English PDF |
| GB/T 37707-2019 |
Thermal spraying—Components with thermally sprayed coatings—Technical supply conditions 热喷涂 热喷涂零件 技术供应条件 |
China National Standards conditions |
English PDF |
| GB/T 37562-2019 |
Technical conditions of pressurized water electrolysis system for hydrogen production 压力型水电解制氢系统技术条件 |
China National Standards conditions |
English PDF |
| GB/T 37509-2019 |
Technical conditions for carrying cooking oil containers 食用油运载容器技术条件 |
China National Standards conditions |
English PDF |
| GB/T 37303.1-2019 |
Ships and marine technology—Manoeuvring of ships—Part 1:General concepts, quantities and test conditions 船舶和海上技术 船舶操纵性 第1部分：基本概念、量与试验条件 |
China National Standards conditions |
English PDF |
| GB/T 36999-2018 |
Requirements on environmental conditions of wave energy power station 海洋波浪能电站环境条件要求 |
China National Standards conditions |
English PDF |
| GB/T 21413.1-2018 |
Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules 轨道交通-机车车辆电气设备-第1部分：一般使用条件和通用规则 |
China National Standards conditions |
English PDF |
| GB/T 7403.1-2018 |
Lead-acid traction batteries—Part 1：Technical conditions 牵引用铅酸蓄电池-第1部分：技术条件 |
China National Standards conditions |
English PDF |
| GB 18285-2018 |
Limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions 汽油车污染物排放限值及测量方法（双怠速法及简易工况法） |
China National Standards conditions |
English PDF |
| GB/T 19071.1-2018 |
Wind turbines—Asynchronous generator—Part 1: Technical conditions 风力发电机组 异步发电机 第1部分：技术条件 |
China National Standards conditions |
English PDF |
| GB/T 4797.1-2018 |
Classification of environmental conditions—Environmental conditions appearing in nature—Temperature and humidity 环境条件分类 自然环境条件 温度和湿度 |
China National Standards conditions |
English PDF |
| GB/T 25389.1-2018 |
Wind turbines—Permanent magnet synchronous generator—Part 1: Technical conditions 风力发电机组 永磁同步发电机 第1部分：技术条件 |
China National Standards conditions |
English PDF |
| GB/T 34560.3-2018 |
Structural steels—Part 3: Technical delivery conditions for fine grain structural steels 结构钢 第3部分：细晶粒结构钢交货技术条件 |
China National Standards conditions |
English PDF |
| GB/T 11048-2018 |
Textiles－Physiological effects－Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) 纺织品 生理舒适性 稳态条件下热阻和湿阻的测定(蒸发热板法) |
China National Standards conditions |
English PDF |
| GB/T 36028.1-2018 |
Shore-to-ship power supply system technical conditions—Part 1: High voltage connection 靠港船舶岸电系统技术条件 第1部分：高压供电 |
China National Standards conditions |
English PDF |
| GB/T 36028.2-2018 |
Shore-to-ship power supply system technical conditions—Part 2: Low voltage connection 靠港船舶岸电系统技术条件 第2部分：低压供电 |
China National Standards conditions |
English PDF |
| GB/T 35853.5-2018 |
List of aerospace equivalent terms—Part 5:Environmental and operating conditions for aircraft equipment 航空航天等效术语表 第5部分：飞行器设备环境和工作条件 |
China National Standards conditions |
English PDF |
| GB/T 25102.8-2017 |
Electroacoustics—Hearing aids—Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions 电声学 助听器 第8部分：模拟实际工作条件下的助听器性能测量方法 |
China National Standards conditions |
English PDF |
| GB/T 7289-2017 |
Electric components—Reliability—Reference conditions for failure rates and stress models for conversion 电学元器件 可靠性 失效率的基准条件和失效率转换的应力模型 |
China National Standards conditions |
English PDF |
| GB/T 34877.3-2017 |
Industrial fans—Determination of fan sound power levels under standardized laboratory conditions—Part3:Enveloping surface methods 工业风机 标准实验室条件下风机声功率级的测定 第3部分：包络面法 |
China National Standards conditions |
English PDF |
| GB/T 34880.2-2017 |
Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine 五轴联动加工中心检验条件 第2部分：立式机床精度检验 |
China National Standards conditions |
English PDF |
| GB/T 34880.1-2017 |
Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine 五轴联动加工中心检验条件 第1部分：卧式机床精度检验 |
China National Standards conditions |
English PDF |
| GB/T 15966-2017 |
Primary parameters and general technical conditions for hydrologic instruments 水文仪器基本参数及通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 34560.4-2017 |
Structural steels—Part 4：Technical delivery conditions for high yield strength quenched and tempered structural steel plates 结构钢 第4部分：淬火加回火高屈服强度结构钢板交货技术条件 |
China National Standards conditions |
English PDF |
| GB/T 34560.6-2017 |
Structural steels—Part 6: Technical delivery conditions for seismic-improved structural steels for building 结构钢 第6部分：抗震型建筑结构钢交货技术条件 |
China National Standards conditions |
English PDF |
| GB/T 34560.2-2017 |
Structural steels—Part 2: Technical delivery conditions for structural steels for general purposes 结构钢 第2部分：一般用途结构钢交货技术条件 |
China National Standards conditions |
English PDF |
| GB/T 14048.13-2017 |
Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards conditions |
English PDF |
| GB/T 34369-2017 |
General technical conditions for electrical control device of passenger ropeway 客运索道电气装置通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 19362.2-2017 |
Test conditions for bridge-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines 龙门铣床检验条件 精度检验 第2部分：龙门移动式铣床 |
China National Standards conditions |
English PDF |
| GB/T 17587.3-2017 |
Ball screws—Part 3:Acceptance conditions and acceptance tests 滚珠丝杠副 第3部分：验收条件和验收检验 |
China National Standards conditions |
English PDF |
| GB/T 34179-2017 |
Photovoltaic glass—Accelerated aging test method under multi-factor coupling conditions 光伏玻璃 多因素耦合环境加速老化试验方法 |
China National Standards conditions |
English PDF |
| GB/T 34026-2017 |
General technical conditions for tensioning device of passenger ropeway 客运索道张紧装置通用技术条件 |
China National Standards conditions |
English PDF |
| GB/T 26804.7-2017 |
Industrial control computer system—Function module—Part 7: General technical conditions and evaluation methods for video capture module 工业控制计算机系统 功能模块模板 第7部分：视频采集模块通用技术条件及评定方法 |
China National Standards conditions |
English PDF |
| GB/T 18271.2-2017 |
Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分：参比条件下的试验 |
China National Standards conditions |
English PDF |
| GB/Z 33902-2017 |
Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards conditions |
English PDF |
| GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 |
China National Standards conditions |
English PDF |
| GB/T 16462.2-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards conditions |
English PDF |
| GB/T 16462.5-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分：进给率、速度和插补精度检验 |
China National Standards conditions |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
