China National Standards

China creep GB Standards List


  •  China "creep" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 2039-2024 Metallic materials-Uniaxial tensile creep test method {译}
    金属材料-单轴拉伸蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/Z 43963-2024 Guide to determining the values ​​of electrical clearances, creepage distances and solid insulation requirements for equipment with rated voltages above 1000V to 2000V AC and above 1500V to 3000V DC {译}
    确定额定电压在交流1000V以上至2000V,直流1500V以上至3000V间设备的电气间隙、爬电距离的数值以及对固体绝缘要求的指南
    China National Standards
    creep

    English PDF
    GB/T 43491-2023 Steel wire rope - creep test method {译}
    钢丝绳 蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 43117-2023 Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions {译}
    玻璃纤维增强热固性塑料(GRP)管 湿态或干态条件下环蠕变性能的测定
    China National Standards
    creep

    English PDF
    GB/T 43103-2023 Metal Materials creep-Fatigue Damage Assessment and Life Prediction Method {译}
    金属材料 蠕变-疲劳损伤评定与寿命预测方法
    China National Standards
    creep

    English PDF
    GB/T 42903-2023 Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates {译}
    金属材料 蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法
    China National Standards
    creep

    English PDF
    GB/T 22077-2023 Test method for creep of overhead conductors {译}
    架空导线蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 5073-2022 Refractory materials - Pressure creep test method {译}
    耐火材料 压蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 42279-2022 Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load {译}
    硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变
    China National Standards
    creep

    English PDF
    GB/T 11546.2-2022 Plastics - Determination of creep properties - Part 2: Three-point bending creep {译}
    塑料 蠕变性能的测定 第2部分:三点弯曲蠕变
    China National Standards
    creep

    English PDF
    GB/T 41111-2021 Rods for gas welding of non-alloy and creep-resisting steels
    气焊用非合金钢及热强钢填充丝
    China National Standards
    creep

    English PDF
    GB/T 41061-2021 Test methods for creep properties of fiber reinforced plastics
    纤维增强塑料蠕变性能试验方法
    China National Standards
    creep

    English PDF
    GB/T 20671.5-2020 Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials
    非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松弛率试验方法
    China National Standards
    creep

    English PDF
    GB/T 38822-2020 Metallic materials—creep-fatigue test method
    金属材料 蠕变-疲劳试验方法
    China National Standards
    creep

    English PDF
    GB/T 39279-2020 Wire electrodes, wires,rods and deposits for gas shielded arc welding of creep-resisting steels
    气体保护电弧焊用热强钢实心焊丝
    China National Standards
    creep

    English PDF
    GB/T 37564-2019 Test method of creep performance for dipped cords
    浸胶帘线蠕变性能试验方法
    China National Standards
    creep

    English PDF
    GB/Z 37754-2019 Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters
    关于确定不超过2mm距离的电气间隙和爬电距离的指南 对影响参数进行研究的试验结果
    China National Standards
    creep

    English PDF
    GB/T 17493-2018 Tubular cored electrodes for creep-resisting steels
    热强钢药芯焊丝
    China National Standards
    creep

    English PDF
    GB/T 16825.2-2018 Verification of static uniaxial testing machines—Part 2: Tension creep testing machines—Verification of the applied force
    静力单轴试验机的检验 第2部分:拉力蠕变试验机 施加力的检验
    China National Standards
    creep

    English PDF
    GB/T 12470-2018 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels
    埋弧焊用热强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求
    China National Standards
    creep

    English PDF
    GB/T 14745-2017 Test method of creep properties for package cushioning material
    包装用缓冲材料蠕变特性试验方法
    China National Standards
    creep

    English PDF
    GB/T 4194-2017 creep testing, high temperature treatment and metallographic examination of the tungsten wire
    钨丝蠕变试验、高温处理及金相检查方法
    China National Standards
    creep

    English PDF
    GB/T 32983-2016 Thermal insulating products for building applications—Determination of compressive creep
    建筑用绝热制品 压缩蠕变性能的测定
    China National Standards
    creep

    English PDF
    GB/T 32682-2016 Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT)
    塑料 聚乙烯环境应力开裂(ESC)的测定 全缺口蠕变试验(FNCT)
    China National Standards
    creep

    English PDF
    GB/T 32350.1-2015 Railway applications—Insulation coordination—Part 1: Basic requirements—Clearances and creepage distances for all electrical and electronic equipment
    轨道交通 绝缘配合 第1部分:基本要求 电工电子设备的电气间隙和爬电距离
    China National Standards
    creep

    English PDF
    GB/T 31291-2014 Standard for evaluation of duration of load and creep effects of wood and wood-based products
    木材和木基产品的荷载持续时间效应和蠕变性能评定
    China National Standards
    creep

    English PDF
    GB/T 30710-2014 Standard test method for creep relaxation of laminated composite gasket materials
    层压复合垫片材料蠕变松弛率试验方法
    China National Standards
    creep

    English PDF
    GB/T 4518-2013 Household sewing machine—Determination of creep of one ply of material over another
    家用缝纫机 缝料层潜移量测试方法
    China National Standards
    creep

    English PDF
    GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
    热强钢焊条
    China National Standards
    creep

    English PDF
    GB/T 2039-2012 Metallic materials - Uniaxial creep testing method in tension
    金属材料 单轴拉伸蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 11546.1-2008 Plastic - Determination of creep behaviour - Part 1: Tensile creep
    塑料 蠕变性能的测定 第1部分:拉伸蠕变
    China National Standards
    creep

    English PDF
    GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2mm
    低压系统内设备的绝缘配合 第5部分:不超过2mm的电气间隙和爬电距离的确定方法
    China National Standards
    creep

    English PDF
    GB/T 22077-2008 Overhead electrical conductors-creep test procedures for stranded conductors
    架空导线蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 20671.5-2006 Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials
    非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法
    China National Standards
    creep

    English PDF
    GB/T 20672-2006 Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions
    硬质泡沫塑料 在规定负荷和温度条件下压缩蠕变的测定
    China National Standards
    creep

    English PDF
    GB/T 16825.2-2005 Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied force
    静力单轴试验机的检验 第2部分:拉力蠕变试验机施加力的检验
    China National Standards
    creep

    English PDF
    GB/T 5073-2005 Refractory Products-Test method of creep in Compression
    耐火材料 压蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 19242-2003 Rubber,vulcanized--Determination of creep in compression or shear
    硫化橡胶 在压缩或剪切状态下蠕变的测定
    China National Standards
    creep

    English PDF
    GB/T 18042-2000 Thermoplastics pipes--Determination of creep ratio
    热塑性塑料管材蠕变比率的试验方法
    China National Standards
    creep

    English PDF
    GB/T 17637-1998 Geotextiles and geotextile-related products--Determination of the tensile creep and creep rupture behaviour
    土工布及其有关产品 拉伸蠕变和拉伸蠕变断裂性能的测定
    China National Standards
    creep

    English PDF
    GB/T 15048-1994 Cellular plastics,rigid--Determination of compressive creep
    硬质泡沫塑料压缩蠕变试验方法
    China National Standards
    creep

    English PDF
    GB/T 14745-1993 Packaging--Cushioning materials--Testmethod for creep properties
    包装 缓冲材料 蠕变特性试验方法
    China National Standards
    creep

    English PDF
    GB/T 7750-1987 Test method of creep properties of adhesive in shear by tension loading (metal to metal)
    胶粘剂拉伸剪切蠕变性能试验方法 (金属对金属)
    China National Standards
    creep

    English PDF
    GB/T 4194-1984 creep testing,high temperature treatment and metallographic examination of the tungsten wires
    钨丝蠕变试验、高温处理及金相检查方法
    China National Standards
    creep

    English PDF

    Find out:44Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards