Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43287-2023 |
Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译} 塑料 在实际野外条件海洋环境中塑料材料崩解度的测定 |
China National Standards degree |
 English PDF |
| GB/Z 42533-2023 |
Hydraulic transmission system Theoretical correlation method between the cleanliness of the system and the cleanliness of the components constituting the system and the degree of oil pollution {译} 液压传动 系统 系统清洁度与构成该系统的元件清洁度和油液污染度理论关联法 |
China National Standards degree |
English PDF |
| GB/T 42362-2023 |
Specification for evaluation of damage degree of groundwater aquifer damage in mining areas {译} 矿区地下水含水层破坏危害程度评价规范 |
China National Standards degree |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards degree |
English PDF |
| GB/T 4942-2021 |
degrees of protection provided by the integral design of rotating electrical machines (IP code)—Classification 旋转电机整体结构的防护等级（IP代码） 分级 |
China National Standards degree |
English PDF |
| GB/T 38890-2020 |
General specifications for 3-degree of freedom parallel robots 三自由度并联机器人通用技术条件 |
China National Standards degree |
English PDF |
| GB/T 38664.3-2020 |
Information technology—Big data—Government data opening and sharing— Part 3：Open degree evaluation 信息技术 大数据 政务数据开放共享 第3部分：开放程度评价 |
China National Standards degree |
English PDF |
| GB/T 12729.4-2020 |
Spices and condiments—Determination of degree of fineness of grinding（hand sieving method） 香辛料和调味品 磨碎细度的测定（手筛法） |
China National Standards degree |
English PDF |
| GB/T 39525-2020 |
Test method for the fastening degree of glass curtain wall panel 玻璃幕墙面板牢固度检测方法 |
China National Standards degree |
English PDF |
| GB/T 18251-2019 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds 聚烯烃管材、管件和混配料中颜料或炭黑分散度的测定 |
China National Standards degree |
English PDF |
| GB/T 37462-2019 |
Locking threads with 30 degree wedge ramp 30°楔形防松螺纹 |
China National Standards degree |
English PDF |
| GB/T 37406-2019 |
Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method 电子封装用球形二氧化硅微粉球形度的检测方法 颗粒动态光电投影法 |
China National Standards degree |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards degree |
English PDF |
| GB/T 5502-2018 |
Inspection of grain and oils—Determination of milling degree of rice 粮油检验 大米加工精度检验 |
China National Standards degree |
English PDF |
| GB/T 34917-2017 |
Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method 硬聚氯乙烯(PVC-U)制品凝胶化度的测定 转矩流变仪法 |
China National Standards degree |
English PDF |
| GB/T 19224-2017 |
Determination of the relative degree of oxidation in bituminous coal 烟煤相对氧化度测定方法 |
China National Standards degree |
English PDF |
| GB/T 4208-2017 |
degrees of protection provide by enclosure (IP code) 外壳防护等级（IP代码） |
China National Standards degree |
English PDF |
| GB/T 32777-2016 |
Test method of degree of dissolution and solution stability for pesticides 农药溶解程度和溶液稳定性测定方法 |
China National Standards degree |
English PDF |
| GB/T 32561.2-2016 |
Measuring method for chalcogenide infrared optical glass—Part 2: degree of striae 红外光学硫系玻璃测试方法 第2部分：条纹度 |
China National Standards degree |
English PDF |
| GB/T 32369-2015 |
Determination of the degree of cure for sealant 密封胶固化程度的测定 |
China National Standards degree |
English PDF |
| GB/T 32062-2015 |
In-situ test method for degradation ratio of vacuum degree of vacuum glazing—Photoelastic method 真空玻璃真空度衰减率现场检测方法 光弹法 |
China National Standards degree |
English PDF |
| GB/T 30789.5-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 5: Assessment of degree of flaking 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第5部分：剥落等级的评定 |
China National Standards degree |
English PDF |
| GB/T 30789.4-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 4: Assessment of degree of cracking 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第4部分：开裂等级的评定 |
China National Standards degree |
English PDF |
| GB/T 30789.8-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第8部分：划线或其它人造缺陷周边剥离和腐蚀等级的评定 |
China National Standards degree |
English PDF |
| GB/T 30789.7-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 7: Assessment of degree of chalking by velvet method 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第7部分：天鹅绒布法评定粉化等级 |
China National Standards degree |
English PDF |
| GB/T 30789.6-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 6: Assessment of degree of chalking by tape method 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第6部分：胶带法评定粉化等级 |
China National Standards degree |
English PDF |
| GB/T 30789.9-2014 |
Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects,and of intensity of uniform changes in appearance―Part 9: Assessment of degree of filiform corrosion 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第9部分：丝状腐蚀等级的评定 |
China National Standards degree |
English PDF |
| GB/T 30789.3-2014 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 3: Assessment of degree of rusting 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第3部分：生锈等级的评定 |
China National Standards degree |
English PDF |
| GB/T 30789.2-2014 |
Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects ,and of intensity of uniform changes in appearance―Part 2: Assessment of degree of blistering 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识：第2部分：起泡等级的评定 |
China National Standards degree |
English PDF |
| GB/T 2391-2014 |
Reactive dyes―Determination of degree of fixation 反应染料 固色率的测定 |
China National Standards degree |
English PDF |
| GB/T 30556.7-2014 |
Electromagnetic compatibility―Installation and mitigation guidelines―degrees of protection provided by enclosures against electromagnetic disturbances (EM code) 电磁兼容 安装和减缓导则 外壳的电磁骚扰防护等级（EM编码） |
China National Standards degree |
English PDF |
| GB/T 2396-2013 |
Disperse dyes—Determination of degree of fixation—Thermosol dyeing process 分散染料 固色率的测定 热熔染色法 |
China National Standards degree |
English PDF |
| GB/T 30038-2013 |
Road vehicles - degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access 道路车辆 电气电子设备防护等级（IP代码） |
China National Standards degree |
English PDF |
| GB/T 29850-2013 |
Test method for measuring compensation degree of silicon materials used for photovoltaic applications 光伏电池用硅材料补偿度测量方法 |
China National Standards degree |
English PDF |
| GB/T 29537-2013 |
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards degree |
English PDF |
| GB/T 29305-2012 |
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials 新的和老化后的纤维素电气绝缘材料粘均聚合度的测量 |
China National Standards degree |
English PDF |
| GB/T 27944-2011 |
Dryseal pipe threads with the thread angle of 60 degrees 60°干密封管螺纹 |
China National Standards degree |
English PDF |
| GB/T 12716-2011 |
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads 60°密封管螺纹 |
China National Standards degree |
English PDF |
| GB/T 27592-2011 |
Reactive dyes - Determination of degree of fixation in pad dyeing 反应染料 轧染固色率的测定 |
China National Standards degree |
English PDF |
| GB/T 27508-2011 |
Method for determining the degree of jump and weave in 70mm、35mm and 16mm motion-picture projected images 70mm、35mm和16mm电影放映画面跳动和晃动等级测定方法 |
China National Standards degree |
English PDF |
| GB/T 5504-2011 |
Inspection of grain and oils - Determination of processing degree of wheat flour 粮油检验 小麦粉加工精度检验 |
China National Standards degree |
English PDF |
| GB/T 25257-2010 |
Optical functional films - Determination of warping degree 光学功能薄膜 翘曲度测定方法 |
China National Standards degree |
English PDF |
| GB/T 12008.6-2010 |
Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation 塑料 聚醚多元醇 第6部分：不饱和度的测定 |
China National Standards degree |
English PDF |
| GB/T 9065.5-2010 |
Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends 液压软管接头 第5部分：37°扩口端软管接头 |
China National Standards degree |
English PDF |
| GB/T 18443.2-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 2：Vacuum degree measurement 真空绝热深冷设备性能试验方法 第2部分：真空度测量 |
China National Standards degree |
English PDF |
| GB/T 12010.5-2010 |
Plastic - polyvinyl alcohol (PVAL) materials - Part 5: Determination for average polymerization degree 塑料 聚乙烯醇材料（PVAL） 第5部分：平均聚合度测定 |
China National Standards degree |
English PDF |
| GB 5413.30-2010 |
National Food Safety Standard-Milk and dairy products - Determination of the degree of impurity 食品安全国家标准 乳和乳制品杂质度的测定 |
China National Standards degree |
English PDF |
| GB/T 24236-2009 |
Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization 直接还原炉用铁矿石 还原指数、最终还原度和金属化率的测定 |
China National Standards degree |
English PDF |
| GB/T 24235-2009 |
Iron ores for shaft direct-reduction feedstocks - Determination of the low temperature reduction-disintegration index and degree of metallization 直接还原炉料用铁矿石 低温还原粉化率和金属化率的测定 气体直接还原法 |
China National Standards degree |
English PDF |
| GB/T 24189-2009 |
Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index 高炉用铁矿石 用最终还原度指数表示的还原性的测定 |
China National Standards degree |
English PDF |
| GB/T 5817-2009 |
Hazardous degree classification of workplace with dust 粉尘作业场所危害程度分级 |
China National Standards degree |
English PDF |
| GB 17465.3-2008 |
Appliance couplers for household and similar general purposes - Part 2: Appliance couplers with a degree of protection higher than IPX0 家用和类似用途器具耦合器 第2部分：防护等级高于IPX0的器具耦合器 |
China National Standards degree |
English PDF |
| GB/T 5507-2008 |
Inspection of grain and oils - Determination for fineness degree of flours 粮油检验 粉类粗细度测定 |
China National Standards degree |
English PDF |
| GB/T 5502-2008 |
Inspection of grain and oils - Determination of processing degree of rice and other grain kernels 粮油检验 米类加工精度检验 |
China National Standards degree |
English PDF |
| GB/T 13576.4-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分：公差 |
China National Standards degree |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards degree |
English PDF |
| GB/T 13576.2-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分：直径与螺距系列 |
China National Standards degree |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards degree |
English PDF |
| GB/T 12729.4-2008 |
Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method 香辛料和调味品 磨碎细度的测定(手筛法) |
China National Standards degree |
English PDF |
| GB/T 22091.1-2008 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads 55°密封管螺纹量规 第1部分：用于检验圆柱内螺纹与圆锥外螺纹 |
China National Standards degree |
English PDF |
| GB/T 11047-2008 |
Textiles - Evaluation for the snagging degree of fabrics - Mace test method 纺织品 织物勾丝性能评定 钉锤法 |
China National Standards degree |
English PDF |
| GB 4208-2008 |
degrees of protection provided by enclosure(IP code) 外壳防护等级(IP代码) |
China National Standards degree |
English PDF |
| GB/T 21266-2007 |
Determination of total capsaicinoid content and representation of pungency degree in capsicum and its products 辣椒及辣椒制品中辣椒素类物质测定及辣度表示方法 |
China National Standards degree |
English PDF |
| GB/T 21265-2007 |
Pungency degree sensory evaluation method for capsicum 辣椒辣度的感官评价方法 |
China National Standards degree |
English PDF |
| GB/T 4942.1-2006 |
degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 旋转电机整体结构的防护等级（IP代码）-分级 |
China National Standards degree |
English PDF |
| GB/T 20138-2006 |
degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 电器设备外壳对外界机械碰撞的防护等级（IK代码） |
China National Standards degree |
English PDF |
| GB/T 10922-2006 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹量规 |
China National Standards degree |
English PDF |
| GB/T 19896-2005 |
degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards degree |
English PDF |
| GB/T 19811-2005 |
Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 |
China National Standards degree |
English PDF |
| GB/T 3332-2004 |
Pulps--Determination of beatingdegree(Schopper-Riegler method) 纸浆 打浆度的测定(肖伯尔-瑞格勒法) |
China National Standards degree |
English PDF |
| GB/T 6864-2003 |
Codes for degree of the People’s Republic of China 中华人民共和国学位代码 |
China National Standards degree |
English PDF |
| GB/T 19224-2003 |
Determining the relative degree of oxidation inbituminous coal 烟煤相对氧化度测定方法 |
China National Standards degree |
English PDF |
| GB/T 7760-2003 |
Rubber，vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method 硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法 |
China National Standards degree |
English PDF |
| GB/T 18474-2001 |
Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 |
China National Standards degree |
English PDF |
| GB/T 7307-2001 |
Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹 |
China National Standards degree |
English PDF |
| GB/T 7306.2-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards degree |
English PDF |
| GB/T 7306.1-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards degree |
English PDF |
| GB/T 18105-2000 |
Method for determination of the processing degree of rice and other grain kernels using iso-color-phase differential staining(IDS) 米类加工精度异色相差分染色检验法(IDS法) |
China National Standards degree |
English PDF |
| GB/T 17650.2-1998 |
Test on gases evolved during combustion of materials from cables--Part 2:Determination of degree of acidity of gases by measuring pH and conductivity 取自电缆或光缆的材料燃烧时释出气体的试验方法 第2部分:用测量pH值和电导率来测定气体的酸度 |
China National Standards degree |
English PDF |
| GB/T 2678.3-1995 |
Pulps--Determination of chlorine consumption (degree of delignification) 纸浆氯耗量(脱木素程度)的测定 |
China National Standards degree |
English PDF |
| GB/T 12005.6-1989 |
Determination of hydrolysis degree ofpartly hydrolysis polyacrylamide 部分水解聚丙烯酰胺水解度测定方法 |
China National Standards degree |
English PDF |
| GB/T 7288.2-1987 |
Equipment reliability testing--Preferred test conditions--Equipment for stationary use in weather protected locations--High degree of simulation 设备可靠性试验 推荐的试验条件 固定使用在有气候防护场所设备 精模拟 |
China National Standards degree |
English PDF |
| GB/T 7288.1-1987 |
Equipment reliability testing--Preferred test conditions indoor portable equipment--Low degree ofsimulation 设备可靠性试验 推荐的试验条件 室内便携设备 粗模拟 |
China National Standards degree |
English PDF |
| GB/T 954-1986 |
120 degree countersunk head rivets 120°沉头铆钉 |
China National Standards degree |
English PDF |
| GB/T 874-1986 |
120 degree countersunk head semi-tubular rivets 120°沉头半空心铆钉 |
China National Standards degree |
English PDF |
| GB/T 1012-1986 |
120 degree oval countersunk rivets 120°半沉头铆钉 |
China National Standards degree |
English PDF |
| GB/T 5888-1986 |
Testing method of degree of polymerization oframie cellulose 苎麻纤维素聚合度测定方法 |
China National Standards degree |
English PDF |
| Find out:87Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
