Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 7260.3-2024 |
Uninterruptible power supply systems (UPS) - Part 3: Methods for determining performance and test requirements {译} 不间断电源系统(UPS)-第3部分:确定性能和试验要求的方法 |
China National Standards determining |
English PDF |
GB/Z 43963-2024 |
Guide to determining the values of electrical clearances, creepage distances and solid insulation requirements for equipment with rated voltages above 1000V to 2000V AC and above 1500V to 3000V DC {译} 确定额定电压在交流1000V以上至2000V,直流1500V以上至3000V间设备的电气间隙、爬电距离的数值以及对固体绝缘要求的指南 |
China National Standards determining |
English PDF |
GB/Z 44002-2024 |
Space environment - Methods for determining solar energy proton injection and peak flux {译} 空间环境-太阳能量质子注量和峰值通量的确定方法 |
China National Standards determining |
English PDF |
GB/T 18153-2024 |
Safety of machinery - Safety data for determining the temperature limit of accessible hot surfaces {译} 机械安全-用于确定可接触热表面温度限值的安全数据 |
China National Standards determining |
English PDF |
GB/T 28893-2024 |
Surface chemical analysis-Auger electron spectroscopy and X-ray photoelectron spectroscopy-methods for determining peak intensity and information required for reporting results {译} 表面化学分析-俄歇电子能谱和X射线光电子能谱-测定峰强度的方法和报告结果所需的信息 |
China National Standards determining |
English PDF |
GB/T 43388-2023 |
Guidelines for determining Serious Safety Performance Faults in Household Automotive Products {译} 家用汽车产品严重安全性能故障判断指南 |
China National Standards determining |
English PDF |
GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards determining |
English PDF |
GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-sectional images of layered materials {译} 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards determining |
English PDF |
GB/T 42553-2023 |
Electroacoustics - Method for determining free-field response corrections for sound level meters {译} 电声学 确定声级计自由场响应修正值的方法 |
China National Standards determining |
English PDF |
GB/T 12966-2022 |
The methods for determining aluminium and aluminium alloys conductivity using eddy current 铝及铝合金电导率涡流测试方法 |
China National Standards determining |
English PDF |
GB/Z 42285-2022 |
Road vehicles - Guidelines for determining the ASIL level of electrical and electronic systems {译} 道路车辆 电子电气系统ASIL等级确定方法指南 |
China National Standards determining |
English PDF |
GB/T 32877-2022 |
Specific test methods for determining losses and efficiency of frequency converter-fed a.c. motors {译} 变频器供电交流电动机确定损耗和效率的特定试验方法 |
China National Standards determining |
English PDF |
GB/T 21404-2022 |
Internal combustion engines - Methods of determining and measuring engine power - General requirements {译} 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards determining |
English PDF |
GB/T 40407-2021 |
X-ray powder diffraction analysis method for determining the phases in portland cement clinker 硅酸盐水泥熟料矿相X射线衍射分析方法 |
China National Standards determining |
English PDF |
GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards determining |
English PDF |
GB/T 19559-2021 |
Method of determining coalbed methane content 煤层气含量测定方法 |
China National Standards determining |
English PDF |
GB/T 40485-2021 |
Method of determining automatically the random reflectance of vitrinite in coal—Image analysis method 煤的镜质体随机反射率自动测定 图像分析法 |
China National Standards determining |
English PDF |
GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards determining |
English PDF |
GB/T 40294-2021 |
Methods for determining electrically excited synchronous machine quantities from tests 确定电励磁同步电机参数的试验方法 |
China National Standards determining |
English PDF |
GB/T 40260-2021 |
Test method for determining gas permeability of polymer membrane materials 高分子膜材料气体渗透性能测试方法 |
China National Standards determining |
English PDF |
GB/T 39826-2021 |
Fine ceramics—determining flexural bond strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards determining |
English PDF |
GB/T 39828-2021 |
Test method for determining elastic modulus of thick ceramic coating at elevated temperature 陶瓷厚涂层的高温弹性模量试验方法 |
China National Standards determining |
English PDF |
GB/T 41060-2021 |
Test method for determining frost resistance of cement mortar 水泥胶砂抗冻性试验方法 |
China National Standards determining |
English PDF |
GB/T 4214.10-2021 |
Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values 家用和类似用途电器噪声测试方法 确定和检验噪声明示值的程序 |
China National Standards determining |
English PDF |
GB/T 38498-2020 |
Evaluation method for determining metal corrosion of disinfectant 消毒剂金属腐蚀性评价方法 |
China National Standards determining |
English PDF |
GB/T 39688-2020 |
Testing method for determining density of ceramic coatings 陶瓷涂层密度的测试方法 |
China National Standards determining |
English PDF |
GB/T 39686-2020 |
Test method for determining elastic modulus and strength of thick ceramic coatings 陶瓷厚涂层的弹性模量与强度试验方法 |
China National Standards determining |
English PDF |
GB/T 39685-2020 |
Test method for determining bonding strength of ceramic coatings 陶瓷覆层结合强度试验方法 |
China National Standards determining |
English PDF |
GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第4部分:应用仿真技术评估特定任务的测量不确定度 |
China National Standards determining |
English PDF |
GB/T 24635.1-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第1部分:概要和计量特性 |
China National Standards determining |
English PDF |
GB/T 39528-2020 |
Test method for determining the seismic drift causing the panels fallout from curtain wall system 建筑幕墙面板抗地震脱落检测方法 |
China National Standards determining |
English PDF |
GB/T 39427-2020 |
Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source 无损检测 工业Ir192伽玛射线源尺寸测定方法 |
China National Standards determining |
English PDF |
GB/T 39421-2020 |
Methods for determining the static gel strength of cement formulations 水泥浆静胶凝强度测定方法 |
China National Standards determining |
English PDF |
GB/T 1741-2020 |
Test method for determining the resistance of paints film to mold 漆膜耐霉菌性测定法 |
China National Standards determining |
English PDF |
GB/T 37983-2019 |
Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation 晶体材料X射线衍射仪旋转定向测试方法 |
China National Standards determining |
English PDF |
GB/T 37977.23-2019 |
Electrostatics—Part 2-3:Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation 静电学 第2-3部分:防静电固体平面材料电阻和电阻率的测试方法 |
China National Standards determining |
English PDF |
GB/T 37835-2019 |
Process for determining solar irradiances 太阳辐照度确定过程一般要求 |
China National Standards determining |
English PDF |
GB/T 36260.2-2018 |
Detection ability - Part 2: Method for determining the detection limit of linear calibration 检出能力-第2部分:线性校准情形检出限的确定方法 |
China National Standards determining |
English PDF |
GB/T 25442-2018 |
Standard methods for determining losses and efficiency of rotation electrical machines from tests(excluding machines for traction vehicles) 旋转电机(牵引电机除外)确定损耗和效率的试验方法 |
China National Standards determining |
English PDF |
GB/T 1557-2018 |
Test method for determining interstitial oxygen content in silicon by infrared absorption 硅晶体中间隙氧含量的红外吸收测量方法 |
China National Standards determining |
English PDF |
GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards determining |
English PDF |
GB/T 34862-2017 |
Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors 确定三相低压笼型感应电动机等值电路参数的试验方法 |
China National Standards determining |
English PDF |
GB/T 34861-2017 |
Specific methods for determining separate losses of large machines from tests 确定大电机各项损耗的专用试验方法 |
China National Standards determining |
English PDF |
GB/T 34724-2017 |
Accelerated method of determining corrosion rate of metal in contact with preservative treated wood 接触防腐木材的金属腐蚀速率加速测定方法 |
China National Standards determining |
English PDF |
GB/T 34726-2017 |
Method of determining corrosion rate of metal in contact with wood preservative 木材防腐剂对金属的腐蚀速率测定方法 |
China National Standards determining |
English PDF |
GB/T 27204-2017 |
Confromity assessment—Guidelines for determining the duration of management system certification audits 合格评定 确定管理体系认证审核时间指南 |
China National Standards determining |
English PDF |
GB/T 34338-2017 |
Test methods for determining mechanical properties of sealing glass for vacuum glazing 真空玻璃用熔封玻璃力学性能试验方法 |
China National Standards determining |
English PDF |
GB/T 34641-2017 |
Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination 无损检测 直接热中子照相检测的像质测定方法 |
China National Standards determining |
English PDF |
GB/T 34210-2017 |
Test method for determining the orientation of sapphire single crystal 蓝宝石单晶晶向测定方法 |
China National Standards determining |
English PDF |
GB/T 35392-2017 |
Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method 无损检测 电导率电磁(涡流)测定方法 |
China National Standards determining |
English PDF |
GB/T 35214-2017 |
Standard method for determining fixation times of inorganic waterborne wood preservatives 无机水载型木材防腐剂固着时间的确定方法 |
China National Standards determining |
English PDF |
GB/T 33298-2016 |
Standard test method for determining cetane number of diesel fuels—Airflow regulation 柴油十六烷值的测定 风量调节法 |
China National Standards determining |
English PDF |
GB/T 33210-2016 |
Non-destructive testing—Test method for determining residual stresses by electromagnetic technology 无损检测 残余应力的电磁检测方法 |
China National Standards determining |
English PDF |
GB/T 33043-2016 |
Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber 人造板甲醛释放量测定大气候箱法 |
China National Standards determining |
English PDF |
GB/T 32877-2016 |
Specific test methods for determining losses and efficiency of converter-fed AC induction motors 变频器供电交流感应电动机确定损耗和效率的特定试验方法 |
China National Standards determining |
English PDF |
GB/T 32650-2016 |
determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry(ICP-MS) 电感耦合等离子质谱法检测石英砂中痕量元素 |
China National Standards determining |
English PDF |
GB/Z 32490-2016 |
Surface chemical analysis—X-ray photoelectron spectroscopy—Procedures for determining backgrounds 表面化学分析 X射线光电子能谱 确定本底的程序 |
China National Standards determining |
English PDF |
GB/T 32553-2016 |
Fluorspar—Method of determining the precision of sampling and sample preparation 萤石 取样和制样精密度的试验方法 |
China National Standards determining |
English PDF |
GB/T 31984-2015 |
Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA) 光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法(TGA) |
China National Standards determining |
English PDF |
GB/T 30820-2014 |
Nondestructive testing—Practice for determining the impedance of absolute eddy-current probes 无损检测 绝对式涡流探头阻抗测定方法 |
China National Standards determining |
English PDF |
GB/T 29905-2013 |
Laboratory method of determining the leachability of wood preservatives 木材防腐剂流失率试验方法 |
China National Standards determining |
English PDF |
GB/T 29896-2013 |
Method of determining the leachability of wood preservatives from treated wood in soil contact 接触土壤防腐木材的防腐剂流失率测定方法 |
China National Standards determining |
English PDF |
GB/T 29649-2013 |
determining the biobased content of biobased materials - Liquid scintillation counters(LSC)method 生物基材料中生物基含量测定 液闪计数器法 |
China National Standards determining |
English PDF |
GB/T 28753-2012 |
determining of coalbed gas content - Heating desorption 煤层气含量测定 加温解吸法 |
China National Standards determining |
English PDF |
GB/T 27581-2011 |
Electromagnetic interference shielding Film - Electroless copper plating solution - Method of determining concentration of Ni2+ and Cu2+ 电磁屏蔽膜 化学镀铜溶液 镍离子和铜离子含量测定方法 |
China National Standards determining |
English PDF |
GB/T 27508-2011 |
Method for determining the degree of jump and weave in 70mm、35mm and 16mm motion-picture projected images 70mm、35mm和16mm电影放映画面跳动和晃动等级测定方法 |
China National Standards determining |
English PDF |
GB/T 26140-2010 |
Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction 无损检测 测量残余应力的中子衍射方法 |
China National Standards determining |
English PDF |
GB/T 25962-2010 |
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions 高速条件下汽车轮毂轴承润滑脂漏失量测定法 |
China National Standards determining |
English PDF |
GB/T 25442-2010 |
Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles) 旋转电机(牵引电机除外)确定损耗和效率的试验方法 |
China National Standards determining |
English PDF |
GB/T 12162.4-2010 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards determining |
English PDF |
GB/T 1033.3-2010 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method 塑料 非泡沫塑料密度的测定 第3部分:气体比重瓶法 |
China National Standards determining |
English PDF |
GB/T 1033.2-2010 |
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method 塑料 非泡沫塑料密度的测定 第2部分:密度梯度柱法 |
China National Standards determining |
English PDF |
GB/T 23561.16-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining slake durability index of rock 煤和岩石物理力学性质测定方法 第16部分:岩石耐崩解性指数测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.15-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 15: Method for determining the swelling stress of rock 煤和岩石物理力学性质测定方法 第15部分:岩石膨胀应力测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.14-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 14: Method for determining the swelling ratio of rock 煤和岩石物理力学性质测定方法 第14部分:岩石膨胀率测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.13-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 13: Methods for determining point load strength index of coal and rock 煤和岩石物理力学性质测定方法 第13部分:煤和岩石点载荷强度指数测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.12-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 12: Method for determining coal hardiness coefficient 煤和岩石物理力学性质测定方法 第12部分:煤的坚固性系数测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.11-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 11: Methods for determining shear strength of coal and rock 煤和岩石物理力学性质测定方法 第11部分:煤和岩石抗剪强度测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.10-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 10: Methods for determining tensile strength of coal and rock 煤和岩石物理力学性质测定方法 第10部分:煤和岩石抗拉强度测定方法 |
China National Standards determining |
English PDF |
GB 12476.9-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers 可燃性粉尘环境用电气设备 第9部分:试验方法 粉尘层电阻率的测定方法 |
China National Standards determining |
English PDF |
GB 12476.8-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust 可燃性粉尘环境用电气设备 第8部分: 试验方法 确定粉尘最低点燃温度的方法 |
China National Standards determining |
English PDF |
GB 12476.10-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures 可燃性粉尘环境用电气设备 第10部分:试验方法 粉尘与空气混合物最小点燃能量的测定方法 |
China National Standards determining |
English PDF |
GB/T 9858-2009 |
Method for determining the folding endurance of photographic film and film base 片基与胶片耐折度的测定方法 |
China National Standards determining |
English PDF |
GB/T 12683-2009 |
Method for determining the tensile properties of photographic film and film base 片基与胶片拉伸性能的测定方法 |
China National Standards determining |
English PDF |
GB/T 24635.3-2009 |
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第3部分:应用已校准工件或标准件 |
China National Standards determining |
English PDF |
GB/T 1555-2009 |
Testing methods for determining the orientation of a semiconductor single crystal 半导体单晶晶向测定方法 |
China National Standards determining |
English PDF |
GB/T 3860-2009 |
Guidelines for determining the subjects and selecting the descriptors 文献主题标引规则 |
China National Standards determining |
English PDF |
GB/T 24127-2009 |
Testing method for determining algal resistance of plastics 塑料抗藻性能试验方法 |
China National Standards determining |
English PDF |
GB/T 2910.15-2009 |
Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) 纺织品 定量化学分析 第15部分:黄麻与某些动物纤维的混合物(含氮量法) |
China National Standards determining |
English PDF |
GB/T 23561.9-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第9部分:煤和岩石三轴强度及变形参数测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.8-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第8部分:煤和岩石变形参数测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.7-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient 煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法 |
China National Standards determining |
English PDF |
GB/T 23561.6-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock 煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.5-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock 煤和岩石物理力学性质测定方法 第5部分:煤和岩石吸水性测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.4-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock 煤和岩石物理力学性质测定方法 第4部分:煤和岩石孔隙率计算方法 |
China National Standards determining |
English PDF |
GB/T 23561.3-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock 煤和岩石物理力学性质测定方法 第3部分:煤和岩石块体密度测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.2-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 2: Methods for determining the true density of coal and rock 煤和岩石物理力学性质测定方法 第2部分:煤和岩石真密度测定方法 |
China National Standards determining |
English PDF |
GB/T 23561.1-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 1: General requirements for sampling 煤和岩石物理力学性质测定方法 第1部分:采样一般规定 |
China National Standards determining |
English PDF |
GB/T 23256-2009 |
Petroleum liquids - Automatic pipeline sampling - Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids 石油液体管线自动取样 测定石油液体中水含量的自动取样器性能的统计学评估 |
China National Standards determining |
English PDF |
GB/T 23250-2009 |
The direct method of determining coalbed gas content in the mine 煤层瓦斯含量井下直接测定方法 |
China National Standards determining |
English PDF |
GB/T 22689-2008 |
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges 测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法 |
China National Standards determining |
English PDF |
GB/T 9861-2008 |
Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion 成像材料 照相胶片和相纸 照相乳剂湿抗划伤的测量方法 |
China National Standards determining |
English PDF |
GB/T 13332-2008 |
Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces 土方机械 液压挖掘机和挖掘装载机 挖掘力的测定方法 |
China National Standards determining |
English PDF |
GB/T 15247-2008 |
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method 微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法 |
China National Standards determining |
English PDF |
GB/T 13305-2008 |
Micrographic method for determining area content of the α-phases in stainless steels 不锈钢中α-相面积含量金相测定法 |
China National Standards determining |
English PDF |
GB/T 6948-2008 |
Method of determining microscopically the reflectance of vitrinite in coal 煤的镜质体反射率显微镜测定方法 |
China National Standards determining |
English PDF |
GB/T 15590-2008 |
Method of determining microlithotype composition 显微煤岩类型测定方法 |
China National Standards determining |
English PDF |
GB/T 1033.1-2008 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 |
China National Standards determining |
English PDF |
GB/T 19559-2008 |
Method of determining coalbed gas content 煤层气含量测定方法 |
China National Standards determining |
English PDF |
GB/T 16935.5-2008 |
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2mm 低压系统内设备的绝缘配合 第5部分:不超过2mm的电气间隙和爬电距离的确定方法 |
China National Standards determining |
English PDF |
GB/T 749-2008 |
Test method for determining capability of resisting sulfate corrode of cement 水泥抗硫酸盐侵蚀试验方法 |
China National Standards determining |
English PDF |
GB/T 2951.13-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验 |
China National Standards determining |
English PDF |
GB/T 2951.11-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验 |
China National Standards determining |
English PDF |
GB/T 12966-2008 |
The method for determining aluminum alloys conductivity using eddy current 铝合金电导率涡流测试方法 |
China National Standards determining |
English PDF |
GB/T 10628-2008 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures 气体分析 校准混合气组成的测定和校验 比较法 |
China National Standards determining |
English PDF |
GB/T 18876.3-2008 |
Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis - Part 3: Determining the carbides rating in steels by automatic image analysis and stereology 应用自动图像分析测定钢和其它金属中金相组织、夹杂物含量和级别的标准试验方法 第3部分 钢中碳化物级别的图像分析与体视学测定 |
China National Standards determining |
English PDF |
GB/T 21865-2008 |
Standard test methods for determining average grain size using semiautomatic and automatic image analysis 用半自动和自动图象分析法测量平均粒度的标准测试方法 |
China National Standards determining |
English PDF |
GB/T 5018-2008 |
Standard test method for determining corrosion preventive properties of lubricating greases 润滑脂防腐蚀性试验法 |
China National Standards determining |
English PDF |
GB/T 21353-2008 |
Test method for determining the resistance of paint film to algae 漆膜抗藻性测定法 |
China National Standards determining |
English PDF |
GB/T 1741-2007 |
Test method for determining the resistance of paints film to mold 漆膜耐霉菌性测定法 |
China National Standards determining |
English PDF |
GB/T 20671.11-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards determining |
English PDF |
GB/T 18876.2-2006 |
Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis - Part 2: Determining the inclusion ratings of steels by automatic image analysis and stereology 应用自动图像分析测定钢和其它金属中金相组织、夹杂物含量和级别的标准试验方法 第2部分:钢中夹杂物级别的图像分析与体视学测定 |
China National Standards determining |
English PDF |
GB/T 1557-2006 |
The method of determining interstitial oxygen content in silicon by infrared absorption 硅晶体中间隙氧含量的红外吸收测量方法 |
China National Standards determining |
English PDF |
GB/T 20137-2006 |
Method for determining losses and efficiency of three-phase cage induction motors 三相笼型异步电动机损耗和效率的确定方法 |
China National Standards determining |
English PDF |
GB/T 20102-2006 |
Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法 |
China National Standards determining |
English PDF |
GB/T 19744-2005 |
determining of plane-strain crack-arrest fracture toughness,K Ia,for ferritic Steels 铁素体钢平面应变止裂韧度 K Ia 试验方法 |
China National Standards determining |
English PDF |
GB/T 12162.3-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of en 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第3部分:场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定 |
China National Standards determining |
English PDF |
GB/T 12162.2-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第2部分:辐射防护用的能量范围为 8keV~1.3MeV 和 4MeV~9MeV 的参考辐射的剂量测定 |
China National Standards determining |
English PDF |
GB/T 755.2-2003 |
Methods for determininglosses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles) 旋转电机(牵引电机除外)确定损耗和效率的试验方法 |
China National Standards determining |
English PDF |
GB/T 19224-2003 |
determining the relative degree of oxidation inbituminous coal 烟煤相对氧化度测定方法 |
China National Standards determining |
English PDF |
GB/T 18876.1-2002 |
Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis--Part 1:Determining the inclusion or second-phase constituent content of steels and other metals by automatic 应用自动图像分析测定钢和其他金属中金相组织、夹杂物含量和级别的标准试验方法 第1部分:钢和其他金属中夹杂物或第二相组织含量的图像分析与体视学测定 |
China National Standards determining |
English PDF |
GB/T 18717.2-2002 |
Ergonomic design for the safety of machinery--Part 2:Principles for determining the dimensions required for openings for access of parts of the body into machinery 用于机械安全的人类工效学设计 第2部分:人体局部进入机械的开口尺寸确定原则 |
China National Standards determining |
English PDF |
GB/T 18717.1-2002 |
Ergonomic design for the safety of machinery--Part 1:Principles for determining the dimensions required for openings for whole-body access into machinery 用于机械安全的人类工效学设计 第1部分:全身进入机械的开口尺寸确定原则 |
China National Standards determining |
English PDF |
GB/T 12162.1-2000 |
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法 |
China National Standards determining |
English PDF |
GB/T 18006.2-1999 |
Test method for determining the degradability of single use and degradable lunch container and drinking set 一次性可降解餐饮具降解性能试验方法 |
China National Standards determining |
English PDF |
GB/T 17632-1998 |
Geotextiles and geotextile-related products--Test method for determining the resistance to liquids of acids and bases 土工布及其有关产品 抗酸、碱液性能的试验方法 |
China National Standards determining |
English PDF |
GB/T 17631-1998 |
Geotextiles and geotextile-related products--Test method for determining the resistance to oxidation 土工布及其有关产品 抗氧化性能的试验方法 |
China National Standards determining |
English PDF |
GB/T 15457-1995 |
Method for determining lubrication of photographic film and film base 胶片与片基润滑度测定方法 |
China National Standards determining |
English PDF |
GB/T 15059-1994 |
Method for determining the water expansion and shrinkage of photographic film base 片基膨胀率和收缩率的测定方法 |
China National Standards determining |
English PDF |
GB/T 14573.4-1993 |
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 4:Methods for stated values for batches of machines 声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第四部分:成批机器标牌值的确定和检验方法 |
China National Standards determining |
English PDF |
GB/T 14573.3-1993 |
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 3:Simple (transition) method for determining and verifying labelled values for batches of machines 声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第三部分:成批机器标牌值的确定和检验简易(过渡)法 |
China National Standards determining |
English PDF |
GB/T 14573.2-1993 |
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 2:Methods for stated values for individual machines 声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第二部分:单台机器标牌值的确定和检验方法 |
China National Standards determining |
English PDF |
GB/T 14573.1-1993 |
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 1:General considerations and definitions 声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第一部分:概述与定义 |
China National Standards determining |
English PDF |
GB/T 12373-1990 |
Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas 居住区大气中气态污染物液体吸收法的标准采样装置 |
China National Standards determining |
English PDF |
GB/T 9863-1988 |
Method for determining the speed of colour reversal camera films 彩色反转照相胶片感光度测定方法 |
China National Standards determining |
English PDF |
GB/T 9862-1988 |
Method for determining the speed and average gradient of black-and-white aerial camera films 黑白航空照相胶片感光度和平均斜率测定方法 |
China National Standards determining |
English PDF |
GB/T 6843-1986 |
Method for determining the coating melting point of photographic materials 感光材料涂层熔点测定方法 |
China National Standards determining |
English PDF |
Find out:147Items | To Page of: First -Previous-Next -Last | 1 |