Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 19701.3-2024 |
Surgical implants-Ultra-high molecular weight polyethylene-Part 3: Accelerated aging Chemical methods {译} 外科植入物-超高分子量聚乙烯-第3部分：加速老化方法 |
China National Standards erated |
 English PDF |
| GB/T 16605-2024 |
Regenerated cellulose silk fabrics {译} 再生纤维素丝织物 |
China National Standards erated |
English PDF |
| GB/T 21121-2024 |
Animal and vegetable oils and fats-Determination of oxidative stability (accelerated oxidation test) {译} 动植物油脂-氧化稳定性的测定（加速氧化测试） |
China National Standards erated |
English PDF |
| GB/T 44995-2024 |
Polypropylene packaging containers-Guidelines for the construction of preliminary screening test methods for adulterated recycled plastics {译} 聚丙烯包装容器-掺杂回收塑料初筛测试方法构建指南 |
China National Standards erated |
English PDF |
| GB/T 21001.4-2024 |
Refrigerated Display Cabinets - Part 4: Classification, Requirements and Test Conditions for Ice Cream Freezers {译} 制冷陈列柜-第4部分：冰淇淋冷冻柜分类、要求和试验条件 |
China National Standards erated |
English PDF |
| GB/T 42125.7-2024 |
Safety requirements for electrical equipment for measurement, control and laboratory use-Part 7: Safety requirements for hand-held and hand-operated probe assemblies for electrical measurement and testing {译} 测量、控制和实验室用电气设备的安全要求-第7部分：电工测量和试验用手持和手操探头组件的安全要求 |
China National Standards erated |
English PDF |
| GB/T 14728.2-2024 |
Two-arm operated walkers - Requirements and test methods - Part 2: Wheeled walkers {译} 双臂操作助行器-要求和试验方法-第2部分：轮式助行器 |
China National Standards erated |
English PDF |
| GB/T 14728.1-2024 |
Two-arm operated walkers - Requirements and test methods - Part 1: Frame walkers {译} 双臂操作助行器-要求和试验方法-第1部分：框式助行器 |
China National Standards erated |
English PDF |
| GB/T 44301-2024 |
Technical requirements for complete sets of equipment for the production of autoclaved aerated concrete {译} 蒸压加气混凝土生产成套装备技术要求 |
China National Standards erated |
English PDF |
| GB/T 44398-2024 |
Refrigerated hydrocarbon fluids-Dynamic measurement-Requirements and guidelines for calibration and installation of flow meters for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids {译} 冷冻烃类流体-动态测量-用于液化天然气（LNG）和其他冷冻烃类流体的流量计校准和安装的要求和指南 |
China National Standards erated |
English PDF |
| GB/T 44210-2024 |
Nanotechnology - Xenon lamp accelerated aging test method for transparent conductive film of nanosilver wire {译} 纳米技术-纳米银线透明导电薄膜氙灯加速老化试验方法 |
China National Standards erated |
English PDF |
| GB/T 30947-2024 |
Canned and refrigerated crab meat {译} 罐装冷藏蟹肉 |
China National Standards erated |
English PDF |
| GB/T 6829-2024 |
General safety requirements for residual current operated protective devices {译} 剩余电流动作保护电器的一般安全要求 |
China National Standards erated |
English PDF |
| GB 29753-2023 |
Road transportation Perishable food and biological products Safety requirements and test methods for refrigerated trucks {译} 道路运输 易腐食品与生物制品 冷藏车安全要求及试验方法 |
China National Standards erated |
English PDF |
| GB/T 28778-2023 |
Pilot operated safety valve {译} 先导式安全阀 |
China National Standards erated |
English PDF |
| GB/T 42911-2023 |
Carbon fiber reinforced composite materials accelerated moisture absorption and supersaturation adjustment method for sealed pressure vessels {译} 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法 |
China National Standards erated |
English PDF |
| GB/T 42542-2023 |
Fiber-reinforced composite materials, sealed pressure vessel, accelerated moisture absorption and supersaturated state adjustment method {译} 纤维增强复合材料 密封压力容器加速吸湿及过饱和状态调节方法 |
China National Standards erated |
English PDF |
| GB/T 26055-2022 |
Regenerated tungsten carbide powder {译} 再生碳化钨粉 |
China National Standards erated |
English PDF |
| GB/T 13477.21-2022 |
Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering {译} 建筑密封材料试验方法 第21部分：人工加速气候老化后颜色变化的测定 |
China National Standards erated |
English PDF |
| GB/T 41493.2-2022 |
Accelerated life test method for mixed metal oxide anodes for cathodic protection part 2: application in soil and natural water environment {译} 阴极保护用混合金属氧化物阳极的加速寿命试验方法 第2部分：应用于土壤和自然水环境中 |
China National Standards erated |
English PDF |
| GB/T 41493.1-2022 |
Accelerated life test method for mixed metal oxide anodes for cathodic protection part 1: application in concrete {译} 阴极保护用混合金属氧化物阳极的加速寿命试验方法 第1部分：应用于混凝土中 |
China National Standards erated |
English PDF |
| GB/T 42281-2022 |
Membrane Aerated Biofilm Reactor (MABR) Hollow Fiber Membrane Module {译} 膜曝气生物膜反应器（MABR）中空纤维膜组件 |
China National Standards erated |
English PDF |
| GB/T 13477.23-2022 |
Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering {译} 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 |
China National Standards erated |
English PDF |
| GB/Z 42085-2022 |
Pneumatics - Component reliability assessment based on accelerated life testing - General guidelines and procedures {译} 气动 基于加速寿命试验的元件可靠性评估 通用指南和程序 |
China National Standards erated |
English PDF |
| GB/T 15762-2020 |
Autoclaved aerated concrete slab "No. 1 Amendment" {译} 蒸压加气混凝土板《第1号修改单》 |
China National Standards erated |
English PDF |
| GB/T 24135-2022 |
Rubber or plastics coated fabrics - Accelerated aging test {译} 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards erated |
English PDF |
| GB/T 37770.1-2022 |
Refrigerated light hydrocarbon fluids - General requirements for automatic level gauges - Part 1: Automatic level gauges for offshore floating storage of liquefied natural gas {译} 冷冻轻烃流体 自动液位计的一般要求 第1部分: 海上浮式储存液化天然气自动液位计 |
China National Standards erated |
English PDF |
| GB/T 40475-2021 |
Technical requirements for lectotype of refrigerated and insulated vehicles 冷藏保温车选型技术要求 |
China National Standards erated |
English PDF |
| GB/T 40393-2021 |
Corrosion of metals and alloys—Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀敏感性加速腐蚀试验方法 |
China National Standards erated |
English PDF |
| GB/T 40363-2021 |
Rigid polyurethane cellular materials used for refrigerated containers and refrigerated trailers 冷藏集装箱和冷藏保温车用硬质聚氨酯泡沫塑料 |
China National Standards erated |
English PDF |
| GB/T 17906-2021 |
Fire emergency rescue equipment—General technical specifications for hydraulically operated rescue tools 消防应急救援装备 液压破拆工具通用技术条件 |
China National Standards erated |
English PDF |
| GB/T 4214.11-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electrically-operated food preparation appliances 家用和类似用途电器噪声测试方法 电动食品加工器具的特殊要求 |
China National Standards erated |
English PDF |
| GB/T 40278-2021 |
Paper and board—Accelerated ageing (exposure to light) 纸和纸板 加速老化（光照条件下） |
China National Standards erated |
English PDF |
| GB/T 40167-2021 |
Paper and board—Accelerated ageing (100 ℃) 纸和纸板 加速老化（100℃） |
China National Standards erated |
English PDF |
| GB/T 40166-2021 |
Paper and board—Accelerated ageing(exposure to nitrogen dioxide) 纸和纸板 加速老化（二氧化氮条件下） |
China National Standards erated |
English PDF |
| GB/T 40124-2021 |
Technical requirements and test methods of regenerated sulphuric acid 再生硫酸技术要求及试验方法 |
China National Standards erated |
English PDF |
| GB/T 3883.309-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 309: Particular requirements for transportable mitre saws 手持式、可移式电动工具和园林工具的安全 第309部分：可移式斜切锯的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.305-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 305: Particular requirements for transportable bench grinders 手持式、可移式电动工具和园林工具的安全 第305部分：可移式台式砂轮机的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.302-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 302: Particular requirements for transportable table saws 手持式、可移式电动工具和园林工具的安全 第302部分：可移式台锯的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.211-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws 手持式、可移式电动工具和园林工具的安全 第211部分：手持式往复锯的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.209-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders 手持式、可移式电动工具和园林工具的安全 第209部分：手持式攻丝机和套丝机的专用要求 |
China National Standards erated |
English PDF |
| GB/T 39912-2021 |
Science and technology program-generated scientific data archiving—Technical and management specification 科技计划形成的科学数据汇交 技术与管理规范 |
China National Standards erated |
English PDF |
| GB/T 39909-2021 |
Science and technology program-generated scientific data archiving—General data element 科技计划形成的科学数据汇交 通用数据元 |
China National Standards erated |
English PDF |
| GB/T 39908-2021 |
Science and technology program-generated scientific data archiving—General code set 科技计划形成的科学数据汇交 通用代码集 |
China National Standards erated |
English PDF |
| GB/T 30027-2021 |
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade VH 起重用钢制短环链 手动链式葫芦用高精度链 VH级 |
China National Standards erated |
English PDF |
| GB/T 30026-2021 |
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH 起重用钢制短环链 手动链式葫芦用高精度链 TH级 |
China National Standards erated |
English PDF |
| GB/T 19136-2021 |
Testing method of the accelerated storage stability at elevated temperature for pesticides 农药热储稳定性测定方法 |
China National Standards erated |
English PDF |
| GB/T 41203-2021 |
Method for accelerated aging test of PV module encapsulating material 光伏组件封装材料加速老化试验方法 |
China National Standards erated |
English PDF |
| GB/T 15092.5-2021 |
Switches for appliances—Part 2:Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery 器具开关 第2部分：手持式、可移式电动工具和园林机器开关的特殊要求 |
China National Standards erated |
English PDF |
| GB/T 15762-2020 |
Autoclaved aerated concrete slabs 蒸压加气混凝土板 |
China National Standards erated |
English PDF |
| GB/T 11969-2020 |
Test methods of autoclaved aerated concrete 蒸压加气混凝土性能试验方法 |
China National Standards erated |
English PDF |
| GB/T 11968-2020 |
Autoclaved aerated concrete blocks 蒸压加气混凝土砌块 |
China National Standards erated |
English PDF |
| GB/T 31396.3-2020 |
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 3:Power-operated chucks with serrated jaws 机床 分离爪自定心卡盘尺寸和几何精度检验 第3部分：梳齿配合型动力卡盘 |
China National Standards erated |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards erated |
English PDF |
| GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 |
China National Standards erated |
English PDF |
| GB 26920.3-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 3: Refrigerated beverage vending machines 商用制冷器具能效限定值和能效等级 第3部分：制冷自动售货机 |
China National Standards erated |
English PDF |
| GB/T 37770.2-2019 |
Refrigerated light hydrocarbon fluids—General requirements for automatic level gauges—Part 2：Gauges in refrigerated-type shore tanks 冷冻轻烃流体 自动液位计的一般要求 第2部分：岸上冷冻型储罐用自动液位计 |
China National Standards erated |
English PDF |
| GB/T 37751.33-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with alu 家用和类似用途的剩余电流动作断路器 第3-3部分：具有连接外部未经处理铝导线的螺纹型接线端子和连接铜或铝导线的铝制螺纹型接线端子RCD的特殊要求 |
China National Standards erated |
English PDF |
| GB/T 37751.32-2019 |
：Residual current operated circuit-breakers for household and similar use—Part 3-2: Particular requirements for RCDs with flat quick-connect terminations 家用和类似用途的剩余电流动作断路器 第3-2部分：带扁平快速连接端头的RCD的特殊要求 |
China National Standards erated |
English PDF |
| GB/T 37751.31-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-1:Particular requirements for RCDs with screwless-type terminals for external copper conductors 家用和类似用途的剩余电流动作断路器 第3-1部分：具有连接外部铜导线的无螺纹型接线端子的RCD的特殊要求 |
China National Standards erated |
English PDF |
| GB/T 37751.2-2019 |
Residual current operated circuit-breakers for household and similar use—Part 2: Residual current devices (RCDs)—Vocabulary 家用和类似用途的剩余电流动作断路器 第2部分：剩余电流电器（RCD） 词汇 |
China National Standards erated |
English PDF |
| GB/T 37751.1-2019 |
Residual current operated circuit-breakers for household and similar use—Part 1: Outline of blocks and modules for residual current devices standard 家用和类似用途的剩余电流动作断路器 第1部分：剩余电流电器标准的独立模块和单元模块概述 |
China National Standards erated |
English PDF |
| GB/T 37597-2019 |
Electrically operated food preparation appliances—Methods for measuring the performance 电动食品加工器具 性能测试方法 |
China National Standards erated |
English PDF |
| GB/T 24964-2019 |
Refrigerated light hydrocarbon fluids—Measurement of cargoes on board LNG carriers 冷冻轻烃流体 液化天然气运输船上货物量的测量 |
China National Standards erated |
English PDF |
| GB/T 24959-2019 |
Refrigerated light hydrocarbon fluids—General requirements for temperature measurement system in cargo tanks of LNG carrier 冷冻轻烃流体 液化天然气运输船货舱内温度测量系统一般要求 |
China National Standards erated |
English PDF |
| GB/T 11026.10-2019 |
Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy 电气绝缘材料 耐热性 第10部分：利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则 |
China National Standards erated |
English PDF |
| GB/T 36896.4-2018 |
Light duty remotely operated vehicles—Part 4：Vdieo, lighting and pan&tilt unit 轻型有缆遥控水下机器人-第4部分：摄像、照明与云台 |
China National Standards erated |
English PDF |
| GB/T 36896.3-2018 |
Light duty remotely operated vehicles—Part 3:Tunnel thruster 轻型有缆遥控水下机器人-第3部分：导管螺旋桨推进器 |
China National Standards erated |
English PDF |
| GB/T 36896.2-2018 |
Light duty remotely operated vehicles—Part 2：Manipulators and hydraulic systems 轻型有缆遥控水下机器人-第2部分：机械手与液压系统 |
China National Standards erated |
English PDF |
| GB/T 36896.1-2018 |
Light duty remotely operated vehicles—Part 1：General provisions 轻型有缆遥控水下机器人-第1部分：总则 |
China National Standards erated |
English PDF |
| GB/T 3229-2018 |
Assembly tools for screws and nuts—Dimensions and torque testing of drive ends for hand and machine-operated screwdriver bits and connecting parts 螺栓螺母用装配工具-手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards erated |
English PDF |
| GB/T 37220-2018 |
Rubber hose assemblies with large diameter—Accelerated fatigue test 大型橡胶软管组合件-加速疲劳试验 |
China National Standards erated |
English PDF |
| GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分：噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards erated |
English PDF |
| GB/T 36361-2018 |
Accelerated life test method for LED LED加速寿命试验方法 |
China National Standards erated |
English PDF |
| GB/T 36790-2018 |
Plastics—Polyamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards erated |
English PDF |
| GB/T 21651-2018 |
Regenerated zinc and zinc alloy ingots 再生锌及锌合金锭 |
China National Standards erated |
English PDF |
| GB/T 13145-2018 |
Specification and management requirements of the stacking yard for refrigerated containers 冷藏集装箱堆场技术管理要求 |
China National Standards erated |
English PDF |
| GB/T 7251.3-2017 |
Low-voltage switchgear and controlgear assemblies—Part 3: Distribution boards intended to be operated by ordinary persons（DBO） 低压成套开关设备和控制设备 第3部分: 由一般人员操作的配电板（DBO） |
China National Standards erated |
English PDF |
| GB/T 6829-2017 |
General requirements for residual current operated protective devices 剩余电流动作保护电器（RCD）的一般要求 |
China National Standards erated |
English PDF |
| GB/T 34986-2017 |
Methods for product accelerated testing 产品加速试验方法 |
China National Standards erated |
English PDF |
| GB/T 34724-2017 |
Accelerated method of determining corrosion rate of metal in contact with preservative treated wood 接触防腐木材的金属腐蚀速率加速测定方法 |
China National Standards erated |
English PDF |
| GB/T 21451.3-2017 |
Petroleum and liquid petroleum products—Measurement of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第3部分：带压罐（非冷冻）中的液位测量 |
China National Standards erated |
English PDF |
| GB/T 21451.6-2017 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第6部分：带压罐（非冷冻）中的温度测量 |
China National Standards erated |
English PDF |
| GB/T 34587-2017 |
Technical requirements for steel refrigerated container repair 钢质冷藏集装箱修理技术要求 |
China National Standards erated |
English PDF |
| GB/T 34580-2017 |
Standard test method for measurement of lubricant generated insoluble color bodies in in-service turbine oils—Membrane patch colorimetry 运行涡轮机油中不溶有色物质的测定方法 膜片比色法 |
China National Standards erated |
English PDF |
| GB/T 10942-2017 |
Refrigerated bulk milk tanks 散装乳冷藏罐 |
China National Standards erated |
English PDF |
| GB/T 34366-2017 |
Light conveyor belts—Determination of the electrostatic field generated by a running light conveyor belt 轻型输送带 轻型输送带运转产生的静电场的测定 |
China National Standards erated |
English PDF |
| GB/T 34179-2017 |
Photovoltaic glass—Accelerated aging test method under multi-factor coupling conditions 光伏玻璃 多因素耦合环境加速老化试验方法 |
China National Standards erated |
English PDF |
| GB/T 3883.403-2017 |
Safety of motor-operated hand-held, transportable and garden tools―Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers 手持式、可移式电动工具和园林工具的安全 第4部分：步行式和手持式草坪修整机、草坪修边机的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.201-2017 |
Safety of motor-operated hand-held,transportable and garden tools―Part 2: Particular requirements for drills and impact drills 手持式、可移式电动工具和园林工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3883.306-2017 |
Safety of motor-operated hand-held,transportable and garden tools―Part 3: Particular requirements for transportable diamond drills with liquid systems 手持式、可移式电动工具和园林工具的安全 第3部分：可移式带液源金刚石钻的专用要求 |
China National Standards erated |
English PDF |
| GB/T 33977-2017 |
Methods to quantify the steady state, power-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations 高压成套开关设备和高压/低压预装式变电站产生的稳态、工频电磁场的量化方法 |
China National Standards erated |
English PDF |
| GB/T 3787-2017 |
Technical safety code for management, operation, inspection and maintenance of hand-held motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards erated |
English PDF |
| GB/T 33720-2017 |
Accelerated test method of luminous flux depreciation for LED lighting products LED照明产品光通量衰减加速试验方法 |
China National Standards erated |
English PDF |
| GB/T 14536.19-2017 |
Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves, including mechanical requirements 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 |
China National Standards erated |
English PDF |
| GB/T 35720-2017 |
Motorized operated damper for household and similar use 家用和类似用途电动风门 |
China National Standards erated |
English PDF |
| GB/T 35157-2017 |
Resinous agglomerated stone slab 树脂型合成石板材 |
China National Standards erated |
English PDF |
| GB/T 22794-2017 |
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses 家用和类似用途的不带和带过电流保护的F型和B型剩余电流动作断路器 |
China National Standards erated |
English PDF |
| GB/T 35464-2017 |
Agglomerated stone test methods—Determination of resistance to ageing by salt mist 合成石材试验方法 盐雾老化测试 |
China National Standards erated |
English PDF |
| GB/T 35165-2017 |
Terminology and classification for agglomerated stone 合成石材术语和分类 |
China National Standards erated |
English PDF |
| GB/T 19889.18-2017 |
Acoustics—Measurement of sound insulation in buildings and of building elements—Part 18: Laboratory measurement of sound generated by rainfall on building elements 声学 建筑和建筑构件隔声测量 第18部分：建筑构件雨噪声隔声的实验室测量 |
China National Standards erated |
English PDF |
| GB/T 13955-2017 |
Installation and operation of residual current operated protective devices 剩余电流动作保护装置安装和运行 |
China National Standards erated |
English PDF |
| GB/T 35160.4-2017 |
Test methods for agglomerated stone—Part 4：Determination of abrasion resistance 合成石材试验方法 第4部分：耐磨性的测定 |
China National Standards erated |
English PDF |
| GB/T 35160.6-2017 |
Test methods for agglomerated stone—Part 6：Determination of impact resistance 合成石材试验方法 第6部分：耐冲击性的测定 |
China National Standards erated |
English PDF |
| GB/T 17215.9311-2017 |
Electricity metering equipment—Dependability—Part 311:Accelerated reliability testing—Elevated temperature and humidity 电测量设备 可信性 第311部分：温度和湿度加速可靠性试验 |
China National Standards erated |
English PDF |
| GB/T 35160.3-2017 |
Test methods for agglomerated stone—Part 3：Determination of compressive strength 合成石材试验方法 第3部分：压缩强度的测定 |
China National Standards erated |
English PDF |
| GB/T 35160.2-2017 |
Test methods for agglomerated stone—Part 2：Determination of flexural strength 合成石材试验方法 第2部分：弯曲强度的测定 |
China National Standards erated |
English PDF |
| GB/T 35160.1-2017 |
Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption 合成石材试验方法 第1部分：密度和吸水率的测定 |
China National Standards erated |
English PDF |
| GB/T 35160.5-2017 |
Test methods for agglomerated stone—Part 5：Determination of thermal shock 合成石材试验方法 第5部分：热激变性能的测定 |
China National Standards erated |
English PDF |
| GB/T 33025-2016 |
Evaluation method for adulterated oleoresin 松脂掺杂评估方法 |
China National Standards erated |
English PDF |
| GB/T 22387-2016 |
Residual current operated relay 剩余电流动作继电器 |
China National Standards erated |
English PDF |
| GB/T 32891.1-2016 |
Rotating electrical machines—Efficiency classes (IE code)—Part 1: Line operated AC motors 旋转电机 效率分级（IE代码） 第1部分：电网供电的交流电动机 |
China National Standards erated |
English PDF |
| GB/T 32753-2016 |
Test methods for degummed ramie string(unseperated fibers) 苎麻精干麻硬条（并丝）率试验方法 |
China National Standards erated |
English PDF |
| GB/T 32710.3-2016 |
Safety requirements for environmental testing and conditioning equipment—Part 3: Refrigerated baths 环境试验仪器及设备安全规范 第3部分：低温恒温槽 |
China National Standards erated |
English PDF |
| GB/T 32710.2-2016 |
Safety requirements for environmental testing and conditioning equipment—Part 2: Refrigerated circulators 环境试验仪器及设备安全规范 第2部分：低温恒温循环装置 |
China National Standards erated |
English PDF |
| GB/T 32710.8-2016 |
Safety requirements for environmental testing and conditioning equipment—Part 8: Refrigerated incubators 环境试验仪器及设备安全规范 第8部分：生化培养箱 |
China National Standards erated |
English PDF |
| GB/Z 22202-2016 |
Reliability test method of residual current operated circuit-breakers for household and similar uses 家用和类似用途的剩余电流动作断路器可靠性试验方法 |
China National Standards erated |
English PDF |
| GB/T 32577-2016 |
Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure 轨道交通有人环境中电子和电气设备产生的磁场强度测量方法 |
China National Standards erated |
English PDF |
| GB/T 2775-2016 |
Capacitors and resistors for use in electronic equipment—Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components 电子设备用电容器和电阻器 轴端、轴套和单孔轴套安装及轴控电子元件的优选尺寸 |
China National Standards erated |
English PDF |
| GB/T 32466-2015 |
Accelerated stress testing procedures for electric and electronic products—Guidance for highly accelerated stress screen 电工电子产品加速应力试验规程 高加速应力筛选导则 |
China National Standards erated |
English PDF |
| GB 26920.2-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 2: Commercial refrigerated cabinets with self-contained condensing unit 商用制冷器具能效限定值和能效等级 第2部分：自携冷凝机组商用冷柜 |
China National Standards erated |
English PDF |
| GB/T 17213.8-2015 |
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8-1部分：噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards erated |
English PDF |
| GB/T 17213.16-2015 |
Industrial-process control valves—Part 8-4: Noise considerations—Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分：噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards erated |
English PDF |
| GB/T 20236-2015 |
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight 非金属材料的聚光加速户外暴露试验方法 |
China National Standards erated |
English PDF |
| GB/T 32088-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus 汽车非金属部件及材料氙灯加速老化试验方法 |
China National Standards erated |
English PDF |
| GB/T 21001.3-2015 |
Refrigerated display cabinets—Part 3：Test rating 制冷陈列柜 第3部分：试验评定 |
China National Standards erated |
English PDF |
| GB/T 21001.2-2015 |
Refrigerated display cabinets—Part 2: Classification, requirements and test conditions 制冷陈列柜 第2部分：分类、要求和试验条件 |
China National Standards erated |
English PDF |
| GB/T 21001.1-2015 |
Refrigerated display cabinets—Part 1: Vocabulary 制冷陈列柜 第1部分：术语 |
China National Standards erated |
English PDF |
| GB/T 11604-2015 |
Testing procedure of radio interference generated by high voltage equipment 高压电气设备无线电干扰测试方法 |
China National Standards erated |
English PDF |
| GB/T 31881-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus 汽车非金属部件及材料紫外加速老化试验方法 |
China National Standards erated |
English PDF |
| GB/Z 31477-2015 |
Process management for avionics-defining and performing highly accelerated tests in aerospace systems-application guide 航空电子过程管理 航空电子产品高加速试验定义和应用指南 |
China National Standards erated |
English PDF |
| GB/T 31510-2015 |
Economic operation of refrigerated display cabinet systems with remote refrigerant compressor condensing units 远置式压缩冷凝机组冷藏陈列柜系统经济运行 |
China National Standards erated |
English PDF |
| GB/T 31396.2-2015 |
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 2: Power-operated chucks with tongue and groove type jaws 机床 分离爪自定心卡盘尺寸和几何精度检验 第2部分：键、槽配合型动力卡盘 |
China National Standards erated |
English PDF |
| GB/T 31396.1-2015 |
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 1: Manually operated chucks with tongue and groove type jaws 机床 分离爪自定心卡盘尺寸和几何精度检验 第1部分：键、槽配合型手动卡盘 |
China National Standards erated |
English PDF |
| GB/T 3512-2014 |
Rubber, vulcanized or thermoplastic―Accelerated ageing and heat resistance tests 硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验 |
China National Standards erated |
English PDF |
| GB 3883.1-2014 |
Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools―Part 1：General requirements 手持式、可移式电动工具和园林工具的安全 第1部分：通用要求 |
China National Standards erated |
English PDF |
| GB 16917.1-2014 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)—Part 1: General rules 家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第1部分: 一般规则 |
China National Standards erated |
English PDF |
| GB 16916.1-2014 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB)―Part 1: General rules 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第1部分: 一般规则 |
China National Standards erated |
English PDF |
| GB 50990-2014 |
Code for design of autoclaved aerated concrete plant 加气混凝土工厂设计规范 |
China National Standards erated |
English PDF |
| GB/T 30027-2013 |
Short link chains for lifting purposes - Grade VH,fine tolerance for manually operated chain hoists 起重用短环链 VH级手动链式葫芦用高精度链 |
China National Standards erated |
English PDF |
| GB/T 30026-2013 |
Short link chains for lifting purposes - Grade TH,fine tolerance for manually operated chain hoists 起重用短环链 TH级手动链式葫芦用高精度链 |
China National Standards erated |
English PDF |
| GB/T 3390.5-2013 |
Hand operated socket wrenches - Inspection,packaging and marking 手动套筒扳手 检验规则、包装与标志 |
China National Standards erated |
English PDF |
| GB/T 3390.4-2013 |
Hand operated socket wrenches - Attachments 手动套筒扳手 连接附件 |
China National Standards erated |
English PDF |
| GB/T 3390.3-2013 |
Hand operated socket wrenches - Driving parts 手动套筒扳手 传动附件 |
China National Standards erated |
English PDF |
| GB/T 3390.2-2013 |
Hand operated socket wrenches - Driving squares 手动套筒扳手 传动方榫和方孔 |
China National Standards erated |
English PDF |
| GB/T 3390.1-2013 |
Hand operated socket wrenches - Socket 手动套筒扳手 套筒 |
China National Standards erated |
English PDF |
| GB 29753-2013 |
Road transportation - Perishable food and biological product of refrigerated van - Security requirement and test methods 道路运输 食品与生物制品冷藏车 安全要求及试验方法 |
China National Standards erated |
English PDF |
| GB/T 29309-2012 |
Accelerated stress testing procedures for electric and electronic products - Guidance for highly accelerated life test 电工电子产品加速应力试验规程 高加速寿命试验导则 |
China National Standards erated |
English PDF |
| GB/T 2424.10-2012 |
Environmental testing - General guidance of accelerated testing for atmospheric corrosion 环境试验 大气腐蚀加速试验的通用导则 |
China National Standards erated |
English PDF |
| GB/T 18029.24-2012 |
Wheelchairs - Part 24：Requirements and test methods for user-operated stair climbing devices 轮椅车 第24部分：乘坐者操纵的爬楼梯装置的要求和测试方法 |
China National Standards erated |
English PDF |
| GB 3883.9-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分：攻丝机的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.8-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分：电剪刀和电冲剪的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.7-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for hammers 手持式电动工具的安全 第2部分：锤类工具的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.6-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for drills and impact drills 手持式电动工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.4-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分：非盘式砂光机和抛光机的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.2-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分：螺丝刀和冲击扳手的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.21-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for band saws 手持式电动工具的安全 第2部分：带锯的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.20-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for strapping tools 手持式电动工具的安全 第2部分：捆扎机的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.19-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for drain cleaners 手持式电动工具的安全 第2部分：管道疏通机的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.12-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for concrete vibrators 手持式电动工具的安全 第2部分：混凝土振动器的专用要求 |
China National Standards erated |
English PDF |
| GB 3883.11-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分：往复锯(曲线锯、刀锯)的专用要求 |
China National Standards erated |
English PDF |
| GB/T 28778-2012 |
Pilot-operated safety valves 先导式安全阀 |
China National Standards erated |
English PDF |
| GB/T 4937.4-2012 |
Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) 半导体器件 机械和气候试验方法 第4部分：强加速稳态湿热试验（HAST） |
China National Standards erated |
English PDF |
| GB/T 28851-2012 |
Specifications for refrigerated incubators 生化培养箱技术条件 |
China National Standards erated |
English PDF |
| GB/T 2423.50-2012 |
Environmental testing - Part 2: Test methods - Test Cy: Damp heat，steady state，accelerated test primarily intended for components 环境试验 第2部分：试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验 |
China National Standards erated |
English PDF |
| GB/T 28416-2012 |
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying 人工大气中的腐蚀试验 交替暴露在腐蚀性气体、中性盐雾及干燥环境中的加速腐蚀试验 |
China National Standards erated |
English PDF |
| GB 26920.1-2011 |
The maximum allowable values of energy performance and energy efficiency grades of commercial refrigerating appliances - Part 1：Refrigerated display cabinets with remote condensing unit 商用制冷器具能效限定值及能效等级 第1部分：远置冷凝机组冷藏陈列柜 |
China National Standards erated |
English PDF |
| GB/T 26950.1-2011 |
Explosive - proof industrial trucks - Part 1: Battery-operated industrial trucks 防爆工业车辆 第1部分：蓄电池工业车辆 |
China National Standards erated |
English PDF |
| GB/T 26809-2011 |
Thermostatic baths and circulators - Refrigerated circulators 恒温槽与恒温循环装置 低温恒温循环装置 |
China National Standards erated |
English PDF |
| GB/T 26808-2011 |
Thermostatic baths and circulators - Refrigerated baths 恒温槽与恒温循环装置 低温恒温槽 |
China National Standards erated |
English PDF |
| GB 26148-2010 |
Safety specification for the use of manually operated high pressure waterjet equipment 高压水射流清洗作业安全规范 |
China National Standards erated |
English PDF |
| GB/T 25873-2010 |
Round-headed cabbage - Guide to cold storage and refrigerated transport 结球甘蓝 冷藏和冷藏运输指南 |
China National Standards erated |
English PDF |
| GB/T 25871-2010 |
Lettuce - Guide to precooling and refrigerated transport 结球生菜 预冷和冷藏运输指南 |
China National Standards erated |
English PDF |
| GB/T 25870-2010 |
Melons - Cold storage and refrigerated transport 甜瓜 冷藏和冷藏运输 |
China National Standards erated |
English PDF |
| GB/T 25868-2010 |
Early potatoes - Guide to cold cooling and refrigerated transport 早熟马铃薯 预冷和冷藏运输指南 |
China National Standards erated |
English PDF |
| GB/T 25867-2010 |
Root vegetables - Cold storage and refrigerated transport 根菜类 冷藏和冷藏运输 |
China National Standards erated |
English PDF |
| GB/T 25962-2010 |
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions 高速条件下汽车轮毂轴承润滑脂漏失量测定法 |
China National Standards erated |
English PDF |
| GB/T 21412.8-2010 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems 石油天然气工业 水下生产系统的设计和操作 第8部分：水下生产系统的水下机器人（ROV）接口 |
China National Standards erated |
English PDF |
| GB/T 24964-2010 |
Refrigerated light hydrocarbon fluids - Liquefied natural gas - Procedure for custody transfer on board ship 冷冻轻烃流体 液化天然气 船上贸易交接程序 |
China National Standards erated |
English PDF |
| GB/T 24962-2010 |
Refrigerated hydrocarbon liquids - Static measurement - Calculation procedure 冷冻烃类流体 静态测量 计算方法 |
China National Standards erated |
English PDF |
| GB/T 24961-2010 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Float-type level gauges 冷冻轻烃流体 液化气储罐内液位的测量 浮子式液位计 |
China National Standards erated |
English PDF |
| GB/T 24960-2010 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Electrical capacitance gauges 冷冻轻烃流体 液化气储罐内液位的测量 电容液位计 |
China National Standards erated |
English PDF |
| GB/T 24959-2010 |
Refrigerated light hydrocarbon fluids - Measurement of temperature in tanks containing liquefied gases - Resistance thermometers and thermocouples 冷冻轻烃流体 液化气储罐内温度的测量 电阻温度计和热电偶 |
China National Standards erated |
English PDF |
| GB/T 24958.1-2010 |
Refrigerated light hydrocarbon fluids - Calibration of spherical tanks in ships - Part 1: Stereo photogrammetry 冷冻轻烃流体 船上球形储罐的校准 第1部分：立体照相测量法 |
China National Standards erated |
English PDF |
| GB/T 24957-2010 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement 冷冻轻烃流体 船上膜式储罐和独立棱柱形储罐的校准 物理测量法 |
China National Standards erated |
English PDF |
| GB/T 18689-2009 |
Agricultural irrigation equipment－ Manually operated small plastics valves 农业灌溉设备 小型手动塑料阀 |
China National Standards erated |
English PDF |
| GB/T 24616-2009 |
Packaging,labeling,transport and storage for refrigerated foods in logistics 冷藏食品物流包装、标志、运输和储存 |
China National Standards erated |
English PDF |
| GB/T 24195-2009 |
Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions 金属和合金的腐蚀 酸性盐雾、“干燥”和“湿润”条件下的循环加速腐蚀试验 |
China National Standards erated |
English PDF |
| GB/T 24135-2009 |
Rubber or plastics coated fabrics - Accelerated ageing tests 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards erated |
English PDF |
| GB 3883.18-2009 |
Safety of hand held motor-operated electric tools - Part 2: Particular requirements for tile saws 手持式电动工具的安全 第二部分：石材切割机的专用要求 |
China National Standards erated |
English PDF |
| GB 13960.4-2009 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers 可移式电动工具的安全 第二部分：平刨和厚度刨的专用要求 |
China National Standards erated |
English PDF |
| GB 13960.10-2009 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders 可移式电动工具的安全 第二部分：单轴立式木铣的专用要求 |
China National Standards erated |
English PDF |
| GB/T 3228-2009 |
Assembly tools for screws and nuts-machine-operated square drive sockets (“impact”) - Dimensions 螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸 |
China National Standards erated |
English PDF |
| GB/T 21412.9-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely operated tool (ROT) intervention systems 石油天然气工业 水下生产系统的设计与操作 第9部分：遥控操作工具 （ROT） 维修系统 |
China National Standards erated |
English PDF |
| GB/T 17846-2009 |
Small craft - Electrically operated direct-current bilge pumps 小艇 直流电动舱底泵 |
China National Standards erated |
English PDF |
| GB/T 23291-2009 |
Machine tools - Test conditions for self-centring，manually-operated chucks with one-piece jaws 机床 整体爪手动自定心卡盘检验条件 |
China National Standards erated |
English PDF |
| GB 15762-2008 |
Autoclaved aerated concrete slabs 蒸压加气混凝土板 |
China National Standards erated |
English PDF |
| GB/T 18029.23-2008 |
Wheelchairs - Part 23: Requirements and test methods for attendant-operated stair-climbing devices 轮椅车 第23部分：护理者操作的爬楼梯装置的要求和测试方法 |
China National Standards erated |
English PDF |
| GB 14536.21-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated oil valves, including mechanical requirements 家用和类似用途电自动控制器 电动油阀的特殊要求, 包括机械要求 |
China National Standards erated |
English PDF |
| GB 14536.13-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated door locks 家用和类似用途电自动控制器 电动门锁的特殊要求 |
China National Standards erated |
English PDF |
| Find out:280Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
