Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43399-2023 |
Road Vehicles Liquefied Natural Gas (LNG) filling Connector 3.1MPa Connector {译} 道路车辆 液化天然气（LNG）加注连接器 3.1MPa连接器 |
China National Standards filling |
 English PDF |
| GB/T 43070-2023 |
General technical specifications for carton (box) forming, filling, inserting and sealing packaging machines {译} 纸箱（盒）成型充填插合封口包装机通用技术规范 |
China National Standards filling |
English PDF |
| GB/T 41733-2022 |
Determination of carbon residue in organic heat carrier Nitrogen filling method {译} 有机热载体残炭测定法 充氮法 |
China National Standards filling |
English PDF |
| GB/T 40361-2021 |
Beer, carbonated beverage cans filling production line—General technical specifications 啤酒、碳酸饮料易拉罐灌装生产线 通用技术规范 |
China National Standards filling |
English PDF |
| GB/T 40360-2021 |
Still beverage metal cans filling and sealing machine—General technical specifications 不含气饮料金属罐灌装封罐机 通用技术条件 |
China National Standards filling |
English PDF |
| GB/T 39997-2021 |
Thermoplastic pipework for underground installation at petrol filling stations 加油站埋地用热塑性塑料复合管道系统 |
China National Standards filling |
English PDF |
| GB/T 39834-2021 |
Technical requirement of fully mechanized bag filling mining with paste 综合机械化膏体袋式充填采煤技术要求 |
China National Standards filling |
English PDF |
| GB/T 41124-2021 |
General technical requirements for aseptic blowing-filling-capping bloc 无菌吹灌旋一体机通用技术要求 |
China National Standards filling |
English PDF |
| GB 50156-2021 |
Code for design and construction of filling station 汽车加油加气加氢站技术标准 |
China National Standards filling |
English PDF |
| GB/T 38463-2020 |
General specification for ultra-clean plastic bottle filling machine 超洁净塑料瓶灌装设备通用技术要求 |
China JB-Machinery Industry Standards filling |
English PDF |
| GB/T 38458-2020 |
Automatic rinsing-filling-capping monobloc for packaged (barreled) drinking water—General technical specification 包装饮用水（桶装）全自动冲洗灌装封盖机 通用技术规范 |
China JB-Machinery Industry Standards filling |
English PDF |
| GB/T 38404-2020 |
Hot filling-capping machine for fruit and vegetable juice (with pulps)—General technical specification 果蔬汁(含颗粒)饮料热灌装封盖机 通用技术规范 |
China JB-Machinery Industry Standards filling |
English PDF |
| GB/T 39338-2020 |
Technical requirements of solid-filling in fully-mechanized coal mining 综合机械化固体充填采煤技术要求 |
China National Standards filling |
English PDF |
| GB/T 39337-2020 |
Technical requirement of fully mechanized bag filling mining with superhigh-water material 综合机械化超高水材料袋式充填采煤技术要求 |
China National Standards filling |
English PDF |
| GB/T 39336-2020 |
Technical requirement of roadside bag filling for gob-side entry retaining with high-water material 沿空留巷高水材料巷旁袋式充填技术要求 |
China National Standards filling |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB/T 22380.2-2019 |
Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB/T 38429.2-2019 |
Explosion protected safety technique of automotive LPG filling stations—Part 2: Explosion protected components related to LPG dispensers and installation requirements 燃气加气站防爆安全技术 第2部分：与液化石油气(LPG)有关的防爆部件和安装要求 |
China National Standards filling |
English PDF |
| GB/T 38429.1-2019 |
Explosion protected safety technique of automotive LPG filling stations—Part 1: Explosion protected safety technique requirements for LPG dispensers 燃气加气站防爆安全技术 第1部分：液化石油气(LPG)加气机防爆要求 |
China National Standards filling |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB/T 22380.2-2019 |
Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB/T 51344-2019 |
Technical standard for anti-leakage retrofits of in-service fuel storage tanks in filling stations 加油站在役油罐防渗漏改造工程技术标准 |
China National Standards filling |
English PDF |
| GB/T 51312-2018 |
Design standard for ship LNG filling station 船舶液化天然气加注站设计标准 |
China National Standards filling |
English PDF |
| GB/T 36418-2018 |
Determination of volatile organic compounds for products with filling materials 絮用纤维制品有机挥发性物质的测定 |
China National Standards filling |
English PDF |
| GB/T 18364-2017 |
filling receptacle of LPG vehicle 汽车用液化石油气加气口 |
China National Standards filling |
English PDF |
| GB/T 14194-2017 |
Rules for filling of compressed gas cylinders 压缩气体气瓶充装规定 |
China National Standards filling |
English PDF |
| GB/T 34526-2017 |
Rules for filling of gas mixture cylinder 混合气体气瓶充装规定 |
China National Standards filling |
English PDF |
| GB/T 34528-2017 |
Regulation for filling of cylinder bundle 气瓶集束装置充装规定 |
China National Standards filling |
English PDF |
| GB/T 18363-2017 |
filling receptacle of CNG vehicle 汽车用压缩天然气加气口 |
China National Standards filling |
English PDF |
| GB/T 5742-2017 |
filling connection for drinking water tanks on ships 船用饮水舱注入接头 |
China National Standards filling |
English PDF |
| GB/T 33753-2017 |
General specification for rotary automatic filling-capping machine for high viscosity fluid 回转式全自动粘流体灌装封盖机通用技术要求 |
China National Standards filling |
English PDF |
| GB/T 2662-2017 |
Clothes with fillings 棉服装 |
China National Standards filling |
English PDF |
| GB/T 3836.7-2017 |
Explosive atmospheres—Part 7: Equipment protection by powder filling “q” 爆炸性环境 第7部分：由充砂型“q”保护的设备 |
China National Standards filling |
English PDF |
| GB/T 22380.1-2017 |
Explosion protected safety technique of the petrol filling station—Part 1: Explosion protected safety technique requirements for fuel filling dispenser 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求 |
China National Standards filling |
English PDF |
| GB/T 33472-2016 |
General specification for carbonated beverages filling-capping machine 含气饮料灌装封盖机通用技术要求 |
China National Standards filling |
English PDF |
| GB/T 33467-2016 |
General specification for automatic blowing-filling-capping bloc 全自动吹瓶灌装旋盖一体机通用技术要求 |
China National Standards filling |
English PDF |
| GB/T 30639-2014 |
General technical specification of automatic metal canned sauce(syrup) filling and sealing machine 全自动金属罐浓酱（浆）灌装封罐机通用技术条件 |
China National Standards filling |
English PDF |
| GB/T 30638-2014 |
Jelly cup filling and sealing machine 杯装果冻包装机 |
China National Standards filling |
English PDF |
| GB 30736-2014 |
The limitation on infilling components of sea reclamation and enclosure project 围填海工程填充物质成分限值 |
China National Standards filling |
English PDF |
| GB/T 30400-2013 |
Safety and hygiene requirements of filling materials in toys 玩具填充物安全和卫生要求 |
China National Standards filling |
English PDF |
| GB/T 30209-2013 |
Aircraft―Gravity filling orifices 飞机 重力加油口 |
China National Standards filling |
English PDF |
| GB/T 30058-2013 |
Rules for record filling and enquiry of international multi-model transportation documents 国际多式联运单据备案与查询规则 |
China National Standards filling |
English PDF |
| GB/T 29018-2012 |
Soft tube filling and sealing machine 软管灌装封尾机 |
China National Standards filling |
English PDF |
| GB/T 29016-2012 |
Linear filling machine with high viscosity fluid 直线式粘流体灌装机 |
China National Standards filling |
English PDF |
| GB 50156-2012 |
Code for design and construction of filling station 汽车加油加气站设计与施工规范 |
China National Standards filling |
English PDF |
| GB 28052-2011 |
Regulation for filling of non-refillable steel welded cylinder 非重复充装焊接钢瓶充装规定 |
China National Standards filling |
English PDF |
| GB 28051-2011 |
Regulation for filling of welded insulated cylinder 焊接绝热气瓶充装规定 |
China National Standards filling |
English PDF |
| GB/T 27738-2011 |
Automatic gravimetric filling instruments 重力式自动装料衡器 |
China National Standards filling |
English PDF |
| GB 27550-2011 |
Safety specification for filling station of gas cylinders 气瓶充装站安全技术条件 |
China National Standards filling |
English PDF |
| GB/T 28025-2011 |
Determination of the residual chlorine in products with filling materials - Water extraction method 絮用纤维制品余氯测试方法 水萃取法 |
China National Standards filling |
English PDF |
| GB/T 28024-2011 |
Determination of sensory odours for products with filling materials 絮用纤维制品异味的测定 |
China National Standards filling |
English PDF |
| GB/T 28023-2011 |
Determination of the antimicrobial agent residues for products with filling materials 絮用纤维制品抗菌整理剂残留量的测定 |
China National Standards filling |
English PDF |
| GB/T 26995-2011 |
General specification for rinsing-filling-capping machine of plastic bottle 塑料瓶冲洗灌装旋盖机通用技术条件 |
China National Standards filling |
English PDF |
| GB/T 26994-2011 |
Plastic cup forming filling sealing machine 塑杯成型灌装封切机 |
China National Standards filling |
English PDF |
| GB/T 26993-2011 |
filling and packaging machine for milk powder 奶粉定量充填包装机 |
China National Standards filling |
English PDF |
| GB/T 26700-2011 |
Rigid polyurethane（PUR）cellular plastics used for doors filling 门体填充用硬质聚氨酯泡沫塑料 |
China National Standards filling |
English PDF |
| GB/T 25986-2010 |
filling device of natural gas vehicles 汽车用液化天然气加注装置 |
China National Standards filling |
English PDF |
| GB 22380.3-2010 |
Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB 22380.2-2010 |
Explosion protected safety technique of the petrol filling station - Part 2: Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards filling |
English PDF |
| GB/T 17313-2009 |
General specification of bag forming, filling and sealing machine 袋成型-充填-封口机通用技术条件 |
China National Standards filling |
English PDF |
| GB/T 24571-2009 |
Aseptic PET bottles cold-filling line PET瓶无菌冷灌装生产线 |
China National Standards filling |
English PDF |
| GB/T 24570-2009 |
Aseptic bag forming-filling-sealing machine 无菌袋成型灌装封口机 |
China National Standards filling |
English PDF |
| GB 14193-2009 |
Rules for filling of liquefied gas cylinders 液化气体气瓶充装规定 |
China National Standards filling |
English PDF |
| GB 13591-2009 |
Rules for the filling of dissolved acetylene cylinders 溶解乙炔气瓶充装规定 |
China National Standards filling |
English PDF |
| GB/T 13465.7-2009 |
Test method of the rates of body weight gain and porefilling of impermeable graphite 不透性石墨增重率和填孔率试验方法 |
China National Standards filling |
English PDF |
| GB/T 23485-2009 |
The disposal of sludge from municipal wastewater treatment plant - Quality of sludge for co-landfilling 城镇污水处理厂污泥处置 混合填埋用泥质 |
China National Standards filling |
English PDF |
| GB/T 23154-2008 |
Safety requirements and test methods of filling materials in toys for import and export 进出口玩具填充材料安全要求及测试方法 |
China National Standards filling |
English PDF |
| GB 22380.1-2008 |
Explosion protected safety technique of the petrol filling station - Part 1: Explosion protected safety technique requirements for fuel filling dispenser 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求 |
China National Standards filling |
English PDF |
| GB/T 2951.51-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component 电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率 |
China National Standards filling |
English PDF |
| GB/T 21270-2007 |
filling of foods 食品馅料 |
China National Standards filling |
English PDF |
| GB 20952-2007 |
Emission standard of air pollutant for gasoline filling stations 加油站大气污染物排放标准 |
China National Standards filling |
English PDF |
| GB 18383-2007 |
General technical requirements for products with filling materials 絮用纤维制品通用技术要求 |
China National Standards filling |
English PDF |
| GB 14194-2006 |
Rules for filling of permanent gas cylinders 永久气体气瓶充装规定 |
China National Standards filling |
English PDF |
| GB/T 18364.2-2005 |
filling receptacle of LPG vehicle-Part 2:Insert 汽车用液化石油气加气口 第2部分:快插式 |
China National Standards filling |
English PDF |
| GB 3836.7-2004 |
Electrical apparatus for explosive gas atmospheres--Part 7:Powder filling“q” 爆炸性气体环境用电气设备 第7部分:充砂型“q” |
China National Standards filling |
English PDF |
| GB/T 18678-2002 |
Equipment for crop protection--Agriculture spray--Nominal capacity of spray tank and diameter of filling 植物保护机械 农业喷雾机(器)药液箱额定容量和加液孔直径 |
China National Standards filling |
English PDF |
| GB/T 18364.1-2001 |
filling receptacle of LPG vehicle(Spird) 汽车用液化石油气加气口(螺旋式) |
China National Standards filling |
English PDF |
| GB/T 18363-2001 |
filling receptacle of CNG vehicle 汽车用压缩天然气加气口 |
China National Standards filling |
English PDF |
| GB/T 5742-1999 |
filling connection for drinking water tanks on ships 船用饮水舱注入接头 |
China National Standards filling |
English PDF |
| GB 6951-1986 |
Safe surface voltage of light fuel oil in tank filling operation 轻质油品装油安全油面电位值 |
China National Standards filling |
English PDF |
| Find out:80Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
