Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mechanical properties tests {译} 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards gin |
 English PDF |
| GB/T 44148.3-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 3: Low temperature toughness nickel steel {译} 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards gin |
English PDF |
| GB/T 44148.2-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 2: Low alloy and alloy (molybdenum, chromium and chromium-molybdenum) steels with specified high temperature properties {译} 承压设备用钢锻件、轧制或锻制钢棒-第2部分：规定高温性能的低合金及合金（钼、铬和铬钼）钢 |
China National Standards gin |
English PDF |
| GB/T 44148.1-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 1: General requirements {译} 承压设备用钢锻件、轧制或锻制钢棒-第1部分：一般要求 |
China National Standards gin |
English PDF |
| GB/T 17692-2024 |
Test methods for net power of automobile engines and drive motors {译} 汽车发动机及驱动电机净功率测试方法 |
China National Standards gin |
English PDF |
| GB/T 19055-2024 |
Automobile engine reliability test methods {译} 汽车发动机可靠性试验方法 |
China National Standards gin |
English PDF |
| GB/T 15314-2024 |
Precision engineering measurement specifications {译} 精密工程测量规范 |
China National Standards gin |
English PDF |
| GB/T 18297-2024 |
Automobile engine performance test methods {译} 汽车发动机性能试验方法 |
China National Standards gin |
English PDF |
| GB/Z 44116-2024 |
Durability test methods for fuel cell engines and key components {译} 燃料电池发动机及关键部件耐久性试验方法 |
China National Standards gin |
English PDF |
| GB/T 19633.2-2024 |
Terminally sterilized medical device packaging - Part 2: Requirements for confirmation of molding, sealing and assembly processes {译} 最终灭菌医疗器械包装-第2部分：成型、密封和装配过程的确认的要求 |
China National Standards gin |
English PDF |
| GB/T 19633.1-2024 |
Terminally sterilized medical device packaging - Part 1: Requirements for materials, sterile barrier systems and packaging systems {译} 最终灭菌医疗器械包装-第1部分：材料、无菌屏障系统和包装系统的要求 |
China National Standards gin |
English PDF |
| GB/T 44075-2024 |
Nanotechnology-surface enhanced Raman solid-phase substrate uniformity measurement-Raman imaging analysis method {译} 纳米技术-表面增强拉曼固相基片均匀性测量-拉曼成像分析法 |
China National Standards gin |
English PDF |
| GB/T 44130.1-2024 |
Electric vehicle charging and swapping service information exchange - Part 1: General {译} 电动汽车充换电服务信息交换-第1部分:总则 |
China National Standards gin |
English PDF |
| GB/T 14408-2024 |
Low-alloy steel castings for general engineering and structural purposes {译} 一般工程与结构用低合金钢铸件 |
China National Standards gin |
English PDF |
| GB/T 25392-2024 |
Agricultural engineering - Electrical and electrical Sub-equipment - Environmental resistance test {译} 农业工程-电气和电子设备-耐环境试验 |
China National Standards gin |
English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards gin |
English PDF |
| GB/T 31268-2024 |
Restriction on excessive packaging of goods-General rules {译} 限制商品过度包装-通则 |
China National Standards gin |
English PDF |
| GB/T 43845-2024 |
Weak static magnetic field imaging measurement method based on scanning nitrogen-vacancy probe {译} 基于扫描氮-空位探针的微弱静磁场成像测量方法 |
China National Standards gin |
English PDF |
| GB/T 43886-2024 |
Imaging materials - Processed color photographs - Thermal stability measurement methods {译} 影像材料-已加工彩色照片-热稳定性测量方法 |
China National Standards gin |
English PDF |
| GB/T 43905.2-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 |
China National Standards gin |
English PDF |
| GB/T 43919-2024 |
Integration requirements for digital production workshops for civil aviation forgings {译} 民用航空锻件数字化生产车间集成要求 |
China National Standards gin |
English PDF |
| GB/T 43955-2024 |
Inspection, marking and packaging of pure and blended yarns of cotton and chemical fibers {译} 棉及化纤纯纺、混纺纱线检验、标志与包装 |
China National Standards gin |
English PDF |
| GB/T 43972-2024 |
Remote operation and maintenance of integrated circuit packaging equipment - state monitoring {译} 集成电路封装设备远程运维-状态监测 |
China National Standards gin |
English PDF |
| GB-23350-2021 |
Requirements for Restricting Excessive Packaging of Goods-Food and Cosmetics {译} 限制商品过度包装要求-食品和化妆品 |
China National Standards gin |
English PDF |
| GB/T 43831-2024 |
Inspection, marking and packaging of pure and blended cotton and chemical fiber fabrics {译} 棉及化纤纯纺、混纺本色布检验、标志与包装 |
China National Standards gin |
English PDF |
| GB/T 20845-2024 |
Small boat- Inboard diesel engines - Engine-mounted fuel, lubricants and electrical components {译} 小艇-舷内柴油机-机装燃油、润滑油和电气部件 |
China National Standards gin |
English PDF |
| GB/T 43805-2024 |
Guidelines for the use of mail and express recycling packaging {译} 邮件快件循环包装使用指南 |
China National Standards gin |
English PDF |
| GB/T 8545-2024 |
Aluminium alloy forgings {译} 铝合金锻件 |
China National Standards gin |
English PDF |
| GB/T 31903-2024 |
Product marking, labeling and packaging of clothing interlinings {译} 服装衬布产品标记、标志与包装 |
China National Standards gin |
English PDF |
| GB/T 45003-2024 |
Occupational health and safety management - Mental health safety at work: managing social and psychological risks - Guidelines {译} 职业健康安全管理-工作中的心理健康安全：管理社会心理风险-指南 |
China National Standards gin |
English PDF |
| GB/T 43661-2024 |
Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc. {译} 表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜（ESPM，如SSRM和SCM）空间分辨的定义和校准 |
China National Standards gin |
English PDF |
| GB/T 11047.3-2024 |
Textiles-Detection and evaluation of fabric snagging properties-Part 3: Needle cloth roller method {译} 纺织品-织物勾丝性能的检测和评价-第3部分：针布滚筒法 |
China National Standards gin |
English PDF |
| GB/T 43796-2024 |
Remote operation and maintenance of integrated circuit packaging equipment-Data collection {译} 集成电路封装设备远程运维-数据采集 |
China National Standards gin |
English PDF |
| GB/T 19665-2024 |
General specifications for infrared imaging human surface temperature screening devices {译} 红外成像人体表面测温筛查仪通用规范 |
China National Standards gin |
English PDF |
| GB/T 42792-2024 |
General Technical Specifications for Aluminum Alloy Forgings for Aviation {译} 航空用铝合金管、棒、型材及线材通用技术规范 |
China National Standards gin |
English PDF |
| GB/T 43880.1-2024 |
General requirements for logistics drone cargo hanging control {译} 服务型制造-导则-第1部分：体系架构 |
China National Standards gin |
English PDF |
| GB/T 43724-2024 |
Direct-write imaging exposure equipment {译} 单体液晶测试方法 |
China National Standards gin |
English PDF |
| GB/T 43820-2024 |
Methods for measuring the diffraction efficiency of imaging diffractive optical elements {译} 纺织品-含相变材料的纺织品-蓄热和放热性能的测定 |
China National Standards gin |
English PDF |
| GB/T 19247.6-2024 |
Quality control methods for magnetic resonance imaging/spectroscopy {译} 印制板组装-第6部分:球栅阵列（BGA）和盘栅阵列（LGA）焊点空洞的评估要求及测试方法 |
China National Standards gin |
English PDF |
| GB/T 43538-2023 |
Quality technical requirements for integrated circuit metal packaging casing {译} 集成电路金属封装外壳质量技术要求 |
China National Standards gin |
English PDF |
| GB/T 43531-2023 |
Optical performance testing method for multi-view stitching panoramic imaging equipment {译} 多目拼接全景成像设备光学性能测试方法 |
China National Standards gin |
English PDF |
| GB/T 43480-2023 |
Non-destructive testing Phased array ultrasonic cylindrical imaging guided wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards gin |
English PDF |
| GB/T 43467-2023 |
A guide to organizing and managing business meetings {译} 商业会议组织管理指南 |
China National Standards gin |
English PDF |
| GB/T 43333-2023 |
Standards for debugging and acceptance of independent microgrids {译} 独立型微电网调试与验收规范 |
China National Standards gin |
English PDF |
| GB/T 35594-2023 |
Paper and cardboard for pharmaceutical packaging {译} 医药包装用纸和纸板 |
China National Standards gin |
English PDF |
| GB/T 31728-2023 |
Movable light fixture with charging device {译} 带充电装置的可移式灯具 |
China National Standards gin |
English PDF |
| GB/T 20064.1-2023 |
Reciprocating internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译} 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards gin |
English PDF |
| GB/T 1149.17-2023 |
Internal combustion engines - Piston rings - Part 17: Steel spiral spring oil rings {译} 内燃机 活塞环 第17部分：钢质螺旋撑簧油环 |
China National Standards gin |
English PDF |
| GB/T 1149.12-2023 |
Internal combustion engines - Piston rings - Part 12: Wedge steel rings {译} 内燃机 活塞环 第12部分：楔形钢环 |
China National Standards gin |
English PDF |
| GB/T 1149.11-2023 |
Internal combustion engines - Piston rings - Part 11: Wedge cast iron rings {译} 内燃机 活塞环 第11部分：楔形铸铁环 |
China National Standards gin |
English PDF |
| GB 43352-2023 |
Express packaging heavy metals and specific substance limits {译} 快递包装重金属与特定物质限量 |
China National Standards gin |
English PDF |
| GB/T 43283-2023 |
Express recycling packaging box {译} 快递循环包装箱 |
China National Standards gin |
English PDF |
| GB/T 43373-2023 |
Space data and information transmission system Deep space measurement and control pseudo code ranging technical requirements {译} 空间数据与信息传输系统 深空测控伪码测距技术要求 |
China National Standards gin |
English PDF |
| GB/T 22619-2023 |
Bifenthrin original drug {译} 联苯菊酯原药 |
China National Standards gin |
English PDF |
| GB/T 43332-2023 |
Safety requirements for conductive charging and discharging of electric vehicles {译} 电动汽车传导充放电安全要求 |
China National Standards gin |
English PDF |
| GB/T 43413-2023 |
Non-destructive testing Infrared thermal imaging testing General rules for thermoelastic stress measurement methods {译} 无损检测 红外热成像检测 热弹性应力测量方法通则 |
China National Standards gin |
English PDF |
| GB/T 43409-2023 |
Metallographic examination of carbon steel and low alloy steel castings for general engineering and structural purposes {译} 一般工程与结构用碳钢及低合金钢铸件金相检验 |
China National Standards gin |
English PDF |
| GB/T 15548-2023 |
General technical conditions for three-phase synchronous generators driven by reciprocating internal combustion engines {译} 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards gin |
English PDF |
| GB/T 43297-2023 |
Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy {译} 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 |
China National Standards gin |
English PDF |
| GB/T 19042.6-2023 |
Evaluation and routine testing of medical imaging departments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in breast tomosynthesis imaging mode {译} 医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验 |
China National Standards gin |
English PDF |
| GB 43284-2023 |
Requirements for restricting excessive packaging of commodities Fresh edible agricultural products {译} 限制商品过度包装要求 生鲜食用农产品 |
China National Standards gin |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data {译} 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards gin |
English PDF |
| GB/T 9151-2023 |
Drilling Engineering Terminology {译} 钻探工程术语 |
China National Standards gin |
English PDF |
| GB/T 7184-2023 |
Reciprocating internal combustion engine vibration assessment method {译} 往复式内燃机 振动评定方法 |
China National Standards gin |
English PDF |
| GB/T 43201.5-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 5: Manufacturing Change Management {译} 工业自动化系统与集成 生产系统工程的标准化程序 第5部分：制造变更管理 |
China National Standards gin |
English PDF |
| GB/T 43201.4-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 4: Key Performance Indicators in the Production Planning Process {译} 工业自动化系统与集成 生产系统工程的标准化程序 第4部分：生产计划过程中的关键绩效指标 |
China National Standards gin |
English PDF |
| GB/T 43201.3-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 3: Information Flow in the Production Planning Process {译} 工业自动化系统与集成 生产系统工程的标准化程序 第3部分：生产计划过程中的信息流 |
China National Standards gin |
English PDF |
| GB/T 43201.2-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 2: Reference Process for Seamlessly Connecting Production Plans {译} 工业自动化系统与集成 生产系统工程的标准化程序 第2部分：无缝衔接生产计划的参考过程 |
China National Standards gin |
English PDF |
| GB/T 43198-2023 |
Polyethylene blow molded containers for food packaging {译} 食品包装用聚乙烯吹塑容器 |
China National Standards gin |
English PDF |
| GB/T 43191-2023 |
Electric vehicle AC charging pile on-site detector {译} 电动汽车交流充电桩现场检测仪 |
China National Standards gin |
English PDF |
| GB/T 43177-2023 |
Chlorantraniliprole original drug {译} 氯虫苯甲酰胺原药 |
China National Standards gin |
English PDF |
| GB/T 43133.1-2023 |
Transport packaging Reusable plastic turnover boxes Part 1: General requirements {译} 运输包装 可重复使用的塑料周转箱 第1部分：通用要求 |
China National Standards gin |
English PDF |
| GB/T 43109-2023 |
Stainless steel composite steel plates for shipbuilding and offshore engineering {译} 船舶及海洋工程用不锈钢复合钢板 |
China National Standards gin |
English PDF |
| GB/T 43070-2023 |
General technical specifications for carton (box) forming, filling, inserting and sealing packaging machines {译} 纸箱（盒）成型充填插合封口包装机通用技术规范 |
China National Standards gin |
English PDF |
| GB/T 43038-2023 |
Communication network credibility engineering {译} 通信网络可信性工程 |
China National Standards gin |
English PDF |
| GB/T 43033-2023 |
Coding specification for distributed energy supply engineering identification system {译} 分布式供能工程标识系统编码规范 |
China National Standards gin |
English PDF |
| GB/T 39003.3-2023 |
Engineering data exchange format for industrial automation systems engineering Automation markup language Part 3: Geometry and kinematics {译} 工业自动化系统工程用工程数据交换格式 自动化标记语言 第3部分：几何学和运动学 |
China National Standards gin |
English PDF |
| GB/T 39003.2-2023 |
Engineering data exchange format for industrial automation system engineering Automation markup language Part 2: Semantics library {译} 工业自动化系统工程用工程数据交换格式 自动化标记语言 第2部分：语义学库 |
China National Standards gin |
English PDF |
| GB/T 38775.8-2023 |
Wireless charging systems for electric vehicles Part 8: Special requirements for commercial vehicle applications {译} 电动汽车无线充电系统 第8部分：商用车应用特殊要求 |
China National Standards gin |
English PDF |
| GB/T 34480-2023 |
High strength and high toughness Al-Zn-Mg-Cu series aluminum alloy forgings {译} 高强高韧型Al-Zn-Mg-Cu系铝合金锻件 |
China National Standards gin |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards gin |
English PDF |
| GB/T 23337-2023 |
Internal combustion engine intake and exhaust valves technical conditions {译} 内燃机 进、排气门 技术条件 |
China National Standards gin |
English PDF |
| GB/T 20787-2023 |
Reciprocating internal combustion engines—Measurement methods for structure-borne noise {译} 往复式内燃机 结构噪声测量方法 |
China National Standards gin |
English PDF |
| GB/T 20234.4-2023 |
Connecting devices for conductive charging of electric vehicles Part 4: High-power DC charging interface {译} 电动汽车传导充电用连接装置 第4部分：大功率直流充电接口 |
China National Standards gin |
English PDF |
| GB/T 20234.3-2023 |
Connecting devices for conductive charging of electric vehicles Part 3: DC charging interface {译} 电动汽车传导充电用连接装置 第3部分：直流充电接口 |
China National Standards gin |
English PDF |
| GB/T 20234.1-2023 |
Connection devices for conductive charging of electric vehicles Part 1: General requirements {译} 电动汽车传导充电用连接装置 第1部分：通用要求 |
China National Standards gin |
English PDF |
| GB/T 18487.1-2023 |
Electric vehicle conductive charging systems Part 1: General requirements {译} 电动汽车传导充电系统 第1部分：通用要求 |
China National Standards gin |
English PDF |
| GB/T 15371-2023 |
Reciprocating internal combustion engine - Evaluation method for torsional vibration of crankshaft shafting {译} 往复式内燃机 曲轴轴系扭转振动评定方法 |
China National Standards gin |
English PDF |
| GB/T 14097-2023 |
Reciprocating internal combustion engines Noise limits {译} 往复式内燃机 噪声限值 |
China National Standards gin |
English PDF |
| GB/T 12451-2023 |
Book cataloging-in-print data {译} 图书在版编目数据 |
China National Standards gin |
English PDF |
| GB/T 10346-2023 |
Liquor inspection rules and markings, packaging, transportation and storage {译} 白酒检验规则和标志、包装、运输、贮存 |
China National Standards gin |
English PDF |
| GB/T 42861-2023 |
General specifications for bulging blind rivets {译} 鼓包型抽芯铆钉通用规范 |
China National Standards gin |
English PDF |
| GB/T 42849-2023 |
Bulging head blind rivets {译} 凸头鼓包型抽芯铆钉 |
China National Standards gin |
English PDF |
| GB/T 22648-2023 |
Aluminum-plastic composite hose, aluminum foil for battery soft packaging {译} 铝塑复合软管、电池软包用铝箔 |
China National Standards gin |
English PDF |
| GB/T 8180-2023 |
Packaging, marking, transportation and storage of titanium and titanium alloy processed products {译} 钛及钛合金加工产品的包装、标志、运输和贮存 |
China National Standards gin |
English PDF |
| GB/T 42899-2023 |
Test method for weldability of marine engineering structural steel {译} 海洋工程结构钢可焊性试验方法 |
China National Standards gin |
English PDF |
| GB/T 42678-2023 |
Hot rolled steel for oil and gas engineering {译} 石油天然气工程用热轧型钢 |
China National Standards gin |
English PDF |
| GB/T 24748-2023 |
Reciprocating internal combustion engine flywheel technical conditions {译} 往复式内燃机 飞轮 技术条件 |
China National Standards gin |
English PDF |
| GB/T 42799-2023 |
Ship and Marine Technology Navigation and Shallow Water Engineering Vessels Anchor Winch {译} 船舶与海洋技术 航行及浅水工程船 起锚绞车 |
China National Standards gin |
English PDF |
| GB/T 42886-2023 |
Microscope Digital Imaging Display Microscope Imaging performance information provided to the user {译} 显微镜 数字成像显示显微镜 提供给用户的成像性能信息 |
China National Standards gin |
English PDF |
| GB/T 42894-2023 |
Emergency medicine packaging requirements {译} 应急药材包装要求 |
China National Standards gin |
English PDF |
| GB/T 42658.4-2023 |
Surface Chemical Analysis Sample Handling, Preparation and Setup Guide Part 4: Reporting information on the origin, preparation, handling and set-up of nanoobjects prior to surface analysis {译} 表面化学分析 样品处理、制备和安装指南 第4部分: 报告表面分析前纳米物体相关的来历、制备、处理和安装信息 |
China National Standards gin |
English PDF |
| GB/T 42550-2023 |
Resource utilization of agricultural waste Disposal and recycling of agricultural production materials packaging waste {译} 农业废弃物资源化利用 农业生产资料包装废弃物处置和回收利用 |
China National Standards gin |
English PDF |
| GB/T 1151-2023 |
Internal combustion engine main bearing bush and connecting rod bearing bush technical specification {译} 内燃机 主轴瓦及连杆轴瓦 技术条件 |
China National Standards gin |
English PDF |
| GB/T 17343-2023 |
Packaging container metal square drum {译} 包装容器 金属方桶 |
China National Standards gin |
English PDF |
| GB/T 28055-2023 |
Technical specifications for hot-pressurized plugging of steel pipelines {译} 钢质管道带压封堵技术规范 |
China National Standards gin |
English PDF |
| GB/T 20078-2023 |
Copper and Copper Alloys Forgings {译} 铜和铜合金 锻件 |
China National Standards gin |
English PDF |
| GB/T 15663.2-2023 |
Coal mine technical terminology Part 2: Shaft and roadway engineering {译} 煤矿科技术语 第2部分：井巷工程 |
China National Standards gin |
English PDF |
| GB/T 42545-2023 |
General requirements for the whole life cycle of corrosion control of rubber lining engineering in nuclear power plants {译} 核电厂橡胶衬里工程腐蚀控制全生命周期通用要求 |
China National Standards gin |
English PDF |
| GB/T 2497-2023 |
Marine Diesel Engine Charge Air Cooler {译} 船用柴油机增压空气冷却器 |
China National Standards gin |
English PDF |
| GB/T 42560-2023 |
System and software engineering development operation and maintenance integration capability maturity model {译} 系统与软件工程 开发运维一体化 能力成熟度模型 |
China National Standards gin |
English PDF |
| GB/T 42537-2023 |
Specifications for heat treatment of oversized steel forgings {译} 特大型锻钢件的热处理规范 |
China National Standards gin |
English PDF |
| GB/T 42602-2023 |
Forging specification for large steel forgings {译} 大型锻钢件的锻造规范 |
China National Standards gin |
English PDF |
| GB/T 8190.4-2023 |
Reciprocating internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses {译} 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态和瞬态试验循环 |
China National Standards gin |
English PDF |
| GB/T 8190.1-2023 |
Reciprocating internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions {译} 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量系统 |
China National Standards gin |
English PDF |
| GB/T 42782-2023 |
Digital Collaborative Engineering Collaborative Design Requirements {译} 数字化协同工程 协同设计要求 |
China National Standards gin |
English PDF |
| GB/T 4937.31-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 31: Flammability of plastic encapsulated devices (internal origin) {译} 半导体器件 机械和气候试验方法 第31部分：塑封器件的易燃性（内部引起的） |
China National Standards gin |
English PDF |
| GB/T 42588-2023 |
Systems and software engineering Functional size measurement NESMA method {译} 系统与软件工程 功能规模测量 NESMA方法 |
China National Standards gin |
English PDF |
| GB/T 42566-2023 |
Systems and Software Engineering Functional Size Measurement MkII Function Point Analysis Method {译} 系统与软件工程 功能规模测量 MkII功能点分析方法 |
China National Standards gin |
English PDF |
| GB/T 42306-2023 |
Cork pellets and cork flour classification, properties and packaging {译} 软木粒和软木粉 分类、性质和包装 |
China National Standards gin |
English PDF |
| GB/T 42503-2023 |
Cold chain logistics service specification for agricultural product origin {译} 农产品产地冷链物流服务规范 |
China National Standards gin |
English PDF |
| GB/T 42482-2023 |
Technical specifications for packaging, storage and cold chain transportation of fresh white fungus {译} 生鲜银耳包装、贮存与冷链运输技术规范 |
China National Standards gin |
English PDF |
| GB/T 24002.1-2023 |
Environmental management system - Application of GB/T 24001 Guidelines for managing environmental aspects and responding to environmental conditions for environmental subject areas - Part 1: General principles {译} 环境管理体系 针对环境主题领域应用 GB/T 24001管理环境因素和应对环境状况的指南 第1部分：通则 |
China National Standards gin |
English PDF |
| GB/T 42390-2023 |
Express packaging classification and code {译} 快递包装分类与代码 |
China National Standards gin |
English PDF |
| GB/T 42328-2023 |
Technical requirements for marine diesel engine desulfurization device {译} 船用柴油机脱硫装置技术要求 |
China National Standards gin |
English PDF |
| GB/T 42404-2023 |
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Timing and synchronization for time-sensitive applications in bridging local area networks {译} 信息技术 系统间远程通信和信息交换 局域网和城域网 桥接局域网用时间敏感应用的定时和同步 |
China National Standards gin |
English PDF |
| GB/T 42449-2023 |
Systems and software engineering Functional size measurement IFPUG method {译} 系统与软件工程 功能规模测量 IFPUG方法 |
China National Standards gin |
English PDF |
| GB/T 42452-2023 |
Systems and Software Engineering Functional Size Measurement COSMIC Method {译} 系统与软件工程 功能规模测量 COSMIC方法 |
China National Standards gin |
English PDF |
| GB/T 42448-2023 |
System and software engineering Functional scale measurement FiSMA1.1 method {译} 系统与软件工程 功能规模测量 FiSMA1.1方法 |
China National Standards gin |
English PDF |
| GB 18436-2022 |
Engine Logbook and Clock Record Book {译} 轮机日志和车钟记录簿 |
China National Standards gin |
English PDF |
| GB/Z 28820.4-2022 |
Long-term radiation aging of polymers - Part 4: Effect of different temperatures and dose rates under radiation conditions {译} 聚合物长期辐射老化 第4部分：辐射条件下不同温度和剂量率的影响 |
China National Standards gin |
English PDF |
| GB/T 18455-2022 |
packaging recycling symbol {译} 包装回收标志 |
China National Standards gin |
English PDF |
| GB/T 23156-2022 |
Packaging Packaging and the Environment Terminology {译} 包装 包装与环境 术语 |
China National Standards gin |
English PDF |
| GB/T 41589-2022 |
In-cable control and protection device (IC-CPD) for mode 2 charging of electric vehicles {译} 电动汽车模式2充电的缆上控制与保护装置（IC-CPD） |
China National Standards gin |
English PDF |
| GB/T 8719-2022 |
General regulations on packaging, marking, storage, transportation and quality certificate of carbon materials and their products {译} 炭素材料及其制品的包装、标志、储存、运输和质量证明书的一般规定 |
China National Standards gin |
English PDF |
| GB/T 25366-2022 |
Diesel engine electric control common rail system Common rail pipe assembly {译} 柴油机电控共轨系统 共轨管总成 |
China National Standards gin |
English PDF |
| GB/T 18244-2022 |
Aging test method for building waterproof materials {译} 建筑防水材料老化试验方法 |
China National Standards gin |
English PDF |
| GB/T 41578-2022 |
Technical requirements and test methods for information security of electric vehicle charging system {译} 电动汽车充电系统信息安全技术要求及试验方法 |
China National Standards gin |
English PDF |
| GB/T 41624-2022 |
Seeds (seedlings) of Chinese herbal medicines Panax notoginseng {译} 中药材种子（种苗） 三七 |
China National Standards gin |
English PDF |
| GB/T 41517-2022 |
Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with internal combustion engines - Theoretical calculation of the total airflow demand {译} 船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算 |
China National Standards gin |
English PDF |
| GB 23350-2021 |
Restrictions on Excessive Packaging Requirements for Products Food and Cosmetics {译} 限制商品过度包装要求 食品和化妆品 |
China National Standards gin |
English PDF |
| GB/T 26429-2022 |
Code for equipment engineering supervision {译} 设备工程监理规范 |
China National Standards gin |
English PDF |
| GB/T 41437-2022 |
Determination of naringin and dinaammonium benzoate in finger painting pigments HPLC method {译} 指画颜料中苦味剂柚皮苷和苯甲酸地那铵含量的测定 高效液相色谱法 |
China National Standards gin |
English PDF |
| GB/Z 41399-2022 |
Nondestructive Testing Instrument Industrial X-ray digital imaging system {译} 无损检测仪器 工业X射线数字成像系统 |
China National Standards gin |
English PDF |
| GB/T 22055-2022 |
Connection dimensions of microscope imaging components {译} 显微镜 成像部件的连接尺寸 |
China National Standards gin |
English PDF |
| GB/T 41552-2022 |
Technical specification for ecological planting under Panax notoginseng forest {译} 三七林下生态种植技术规程 |
China National Standards gin |
English PDF |
| GB/T 41485-2022 |
Nuclear instrument geophysical density logging tool {译} 核仪器仪表 地球物理密度测井仪 |
China National Standards gin |
English PDF |
| GB/T 41482-2022 |
Millimeter wave holographic imaging human body safety inspection equipment {译} 毫米波全息成像人体安全检查设备 |
China National Standards gin |
English PDF |
| GB/T 41423-2022 |
Calculation of long-term luminous flux and radiation flux maintenance rate of LED packaging {译} LED封装 长期光通量和辐射通量维持率的推算 |
China National Standards gin |
English PDF |
| GB/T 41406-2022 |
General technical requirements for automatic packaging production line of bagged instant noodles {译} 袋装方便面全自动包装生产线 通用技术要求 |
China National Standards gin |
English PDF |
| GB/T 21355-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems 无损检测 基于存储磷光成像板的工业计算机射线照相检测 系统分类 |
China National Standards gin |
English PDF |
| GB/T 26642-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays 无损检测 基于存储磷光成像板的工业计算机射线照相检测 金属材料X射线和伽玛射线检测总则 |
China National Standards gin |
English PDF |
| GB/T 26116-2022 |
Internal combustion engine coaxial pumps—Testing method 内燃机共轴泵 试验方法 |
China National Standards gin |
English PDF |
| GB/T 10992-2022 |
Engineering electrostatic copiers 工程图纸静电复印机 |
China National Standards gin |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards gin |
English PDF |
| GB/T 41161-2022 |
Reciprocating internal combustion engines—Measurement method for combustion noise 往复式内燃机 燃烧噪声测量方法 |
China National Standards gin |
English PDF |
| GB/T 41347-2022 |
Test method for rub resistance of flexible packaging materials {译} 柔性包装材料耐揉搓性能的测试方法 |
China National Standards gin |
English PDF |
| GB/T 41323-2022 |
Corrosion Control Engineering Life Cycle Terminology {译} 腐蚀控制工程全生命周期 术语 |
China National Standards gin |
English PDF |
| GB/T 41378-2022 |
Plastics Blow-molded polypropylene containers for liquid food packaging {译} 塑料 液态食品包装用吹塑聚丙烯容器 |
China National Standards gin |
English PDF |
| GB/T 41242-2022 |
E-commerce logistics recyclable packaging management specification {译} 电子商务物流可循环包装管理规范 |
China National Standards gin |
English PDF |
| GB/T 25160-2022 |
Packaging Cardboard Folding Carton Structural Dimensions {译} 包装 卡纸板折叠纸盒结构尺寸 |
China National Standards gin |
English PDF |
| GB/T 42164-2022 |
Leather - Chemical tests - Determination of hexavalent chromium content under heat aging conditions {译} 皮革 化学试验 热老化条件下六价铬含量的测定 |
China National Standards gin |
English PDF |
| GB/T 8750-2022 |
Gold-based bonding wire and ribbon for semiconductor packaging {译} 半导体封装用金基键合丝、带 |
China National Standards gin |
English PDF |
| GB/T 24554-2022 |
Fuel cell engine performance test method {译} 燃料电池发动机性能试验方法 |
China National Standards gin |
English PDF |
| GB/T 42146-2022 |
Government website webpage electronic file packaging requirements {译} 政府网站网页电子文件封装要求 |
China National Standards gin |
English PDF |
| GB/T 2820.8-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets {译} 往复式内燃机驱动的交流发电机组 第8部分：对小功率发电机组的要求和试验 |
China National Standards gin |
English PDF |
| GB/T 2820.1-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 1: Purpose, rating and performance {译} 往复式内燃机驱动的交流发电机组 第1部分：用途、定额和性能 |
China National Standards gin |
English PDF |
| GB/T 42236.1-2022 |
Centralized charging facilities for electric bicycles Part 1: Technical specifications {译} 电动自行车集中充电设施 第1部分：技术规范 |
China National Standards gin |
English PDF |
| GB/T 42206-2022 |
General technical requirements for bagged dried noodle packaging production line {译} 袋装挂面包装生产线通用技术要求 |
China National Standards gin |
English PDF |
| GB/T 42204-2022 |
Clinical medical equipment communication specification Imaging equipment {译} 临床医疗设备通信规范 影像设备 |
China National Standards gin |
English PDF |
| GB/T 41925-2022 |
Classification of Urban Underground Space and Underground Engineering {译} 城市地下空间与地下工程分类 |
China National Standards gin |
English PDF |
| GB/T 42208-2022 |
Nanotechnology - Size measurement of nanoparticles in multiphase systems - Transmission electron microscopy imaging {译} 纳米技术 多相体系中纳米颗粒粒径测量 透射电镜图像法 |
China National Standards gin |
English PDF |
| GB/T 42010-2022 |
Quality requirements for packaging containers and milk powder cans {译} 包装容器 奶粉罐质量要求 |
China National Standards gin |
English PDF |
| GB/T 42089-2022 |
Child-resistant packaging - Requirements and test methods for non-reclosable packaging for non-drug products {译} 防止儿童开启包装 非药品用不可再封口包装的要求与试验方法 |
China National Standards gin |
English PDF |
| GB/T 42091-2022 |
Specification for smelting and ingot casting of vacuum steel ingots for large steel forgings {译} 大型锻钢件用真空钢锭的冶炼与铸锭规范 |
China National Standards gin |
English PDF |
| GB 29743.1-2022 |
Coolant for Motor Vehicles Part 1: Engine Coolant for Fuel Vehicles {译} 机动车冷却液 第1部分：燃油汽车发动机冷却液 |
China National Standards gin |
English PDF |
| GB/T 42012-2022 |
Information Security Technology - Instant Messaging Service Data Security Requirements {译} 信息安全技术 即时通信服务数据安全要求 |
China National Standards gin |
English PDF |
| GB/T 41916-2022 |
Design Guidelines for Barcode Labels of Emergency Supplies Packaging Units {译} 应急物资包装单元条码标签设计指南 |
China National Standards gin |
English PDF |
| GB/T 41662-2022 |
CdZnTe Polycrystalline Materials for High Energy Ray Detection and Imaging Materials {译} 高能射线探测及成像材料用碲锌镉多晶 |
China National Standards gin |
English PDF |
| GB/T 19946-2022 |
Packaging 1D and 2D barcodes for shipping, shipping and receiving labels {译} 包装 用于发货、运输和收货标签的一维条码和二维条码 |
China National Standards gin |
English PDF |
| GB/T 24797.2-2022 |
Films for rubber packaging - Part 2: Natural rubber {译} 橡胶包装用薄膜 第2部分：天然橡胶 |
China National Standards gin |
English PDF |
| GB/T 41698-2022 |
Detection method of exogenous virus in biological products of duck origin {译} 鸭源生物制品外源病毒检测方法 |
China National Standards gin |
English PDF |
| GB/T 2102-2022 |
Acceptance, packaging, marking and quality certificate of steel pipes {译} 钢管的验收、包装、标志和质量证明书 |
China National Standards gin |
English PDF |
| GB/T 41844-2022 |
Specifications for the prevention and control of human-originated contamination of DNA testing products {译} DNA检验用产品人源性污染防控规范 |
China National Standards gin |
English PDF |
| GB/T 41726-2022 |
Identification and detection method of ginseng monomeric saponins {译} 人参单体皂苷鉴定及检测方法 |
China National Standards gin |
English PDF |
| GB/T 11047.2-2022 |
Textiles - Testing and evaluation of snagging properties of fabrics - Part 2: Rolling box method {译} 纺织品 织物勾丝性能的检测和评价 第2部分：滚箱法 |
China National Standards gin |
English PDF |
| GB/T 41817-2022 |
Information Security Technology Personal Information Security Engineering Guidelines {译} 信息安全技术 个人信息安全工程指南 |
China National Standards gin |
English PDF |
| GB/T 19910-2022 |
Technical requirements for repairing electronic control system of automobile engine {译} 汽车发动机电子控制系统修理技术要求 |
China National Standards gin |
English PDF |
| GB/T 41717-2022 |
Terminology of aging management and life management in nuclear power plants {译} 核电厂老化管理与寿命管理术语 |
China National Standards gin |
English PDF |
| GB/T 42067-2022 |
Water-soluble biodegradable medical fabric packaging film bag {译} 水溶性生物降解医用织物包装膜袋 |
China National Standards gin |
English PDF |
| GB/T 712-2022 |
Structural steel for ships and ocean engineering {译} 船舶及海洋工程用结构钢 |
China National Standards gin |
English PDF |
| GB/T 41905-2022 |
Software and System Engineering Software Testing Tool Capabilities {译} 软件与系统工程 软件测试工具能力 |
China National Standards gin |
English PDF |
| GB/T 41866.4-2022 |
Systems and software engineering—Information technology project performance benchmarking measurement framework—Part 4: Data collection and maintenance {译} 系统与软件工程 信息技术项目绩效基准度量框架 第4部分：数据收集和维护 |
China National Standards gin |
English PDF |
| GB/T 41866.3-2022 |
Systems and software engineering - Performance benchmarking framework for information technology projects - Part 3: Reporting {译} 系统与软件工程 信息技术项目绩效基准度量框架 第3部分：报告编制 |
China National Standards gin |
English PDF |
| GB/T 41866.2-2022 |
Systems and software engineering—Information technology project performance benchmarking framework—Part 2: Benchmarking requirements {译} 系统与软件工程 信息技术项目绩效基准度量框架 第2部分：基准度量要求 |
China National Standards gin |
English PDF |
| GB/T 41866.1-2022 |
Systems and software engineering - Performance benchmarking framework for information technology projects - Part 1: Concepts and definitions {译} 系统与软件工程 信息技术项目绩效基准度量框架 第1部分：概念和定义 |
China National Standards gin |
English PDF |
| GB/T 8566-2022 |
Systems and Software Engineering Software Life Cycle Processes {译} 系统与软件工程 软件生存周期过程 |
China National Standards gin |
English PDF |
| GB/T 42005.2-2022 |
Rail transit - Energy storage trams - Part 2: Ground charging systems {译} 轨道交通 储能式电车 第2部分：地面充电系统 |
China National Standards gin |
English PDF |
| GB/T 37141.1-2022 |
Guidelines for Ultraviolet Imaging Inspection of Electrical Equipment in High Altitude Areas Part 1: Substations {译} 高海拔地区电气设备紫外线成像检测导则 第1部分：变电站 |
China National Standards gin |
English PDF |
| GB/T 41682-2022 |
Determination of headspace gas content in food plastic packaging containers - sensor method {译} 食品塑料包装容器中顶空气体含量的测定 传感器法 |
China National Standards gin |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
