Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 43482-2023 |
Hydraulic transmissions hoses and hose assemblies Methods of collecting fluid samples for analysis of cleanliness {译} 液压传动 软管和软管总成 收集流体样本分析清洁度的方法 |
China National Standards hoses |
 English PDF |
| GB/T 3683-2023 |
Specification for rubber hoses and hose assemblies, wire braid reinforced hydraulic types suitable for oil-based or water-based fluids {译} 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 |
China National Standards hoses |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards hoses |
English PDF |
| GB/T 10544-2022 |
Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝缠绕增强外覆橡胶液压型 规范 |
China National Standards hoses |
English PDF |
| GB/T 24146-2022 |
Rubber hoses and hose assemblies for use in oil burners—Specification 用于油燃烧器的橡胶软管和软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards hoses |
English PDF |
| GB/T 5568-2022 |
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection {译} 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards hoses |
English PDF |
| GB/T 40120-2021 |
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods 农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法 |
China National Standards hoses |
English PDF |
| GB/T 2351-2021 |
Fluid power systems and components-Outside diameters of tubes and inside diameters of hoses 流体传动系统及元件 硬管外径和软管内径 |
China National Standards hoses |
English PDF |
| GB/T 39890-2021 |
Shoulder abduction orthoses with upright 支条式肩外展矫形器 |
China National Standards hoses |
English PDF |
| GB/T 39886-2021 |
Hyper-extension spinal orthoses 脊柱过伸矫形器 |
China National Standards hoses |
English PDF |
| GB/T 39871-2021 |
Cervicothoracic orthoses 颈胸矫形器 |
China National Standards hoses |
English PDF |
| GB/T 39868-2021 |
Ankle foot orthoses 踝足矫形器 |
China National Standards hoses |
English PDF |
| GB/T 41178-2021 |
Prosthetics and orthotics—Soft orthoses—Uses,functions,classification and description 假肢和矫形器 软性矫形器 用途、功能、分类和描述 |
China National Standards hoses |
English PDF |
| GB/T 41179-2021 |
Prosthetics and orthotics—Foot orthoses—Uses,functions,classification and description 假肢和矫形器 足矫形器 用途、功能、分类和描述 |
China National Standards hoses |
English PDF |
| GB/T 41172-2021 |
Antispasmodic ankle foot orthoses 抗痉挛踝足矫形器 |
China National Standards hoses |
English PDF |
| GB/T 41183-2021 |
Antispasmodic wrist orthoses 抗痉挛腕矫形器 |
China National Standards hoses |
English PDF |
| GB/T 40838-2021 |
Wrist orthoses 腕矫形器 |
China National Standards hoses |
English PDF |
| GB/T 39327-2020 |
Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 |
China National Standards hoses |
English PDF |
| GB/T 39313-2020 |
Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范 |
China National Standards hoses |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards hoses |
English PDF |
| GB/T 39309-2020 |
Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards hoses |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards hoses |
English PDF |
| GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 14905-2020 |
Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards hoses |
English PDF |
| GB/T 37997-2019 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送烃类、溶剂和化学品用多层热塑性塑料（非硫化）软管及软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 15329-2019 |
Rubber hoses and hose assemblies—Textile-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的织物增强液压型 规范 |
China National Standards hoses |
English PDF |
| GB/T 9576-2019 |
Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards hoses |
English PDF |
| GB/T 37112-2018 |
Cervical orthoses 颈部矫形器 |
China National Standards hoses |
English PDF |
| GB/T 37221-2018 |
Self-floating rubber hoses and hose assemblies for dredging applications 自浮式排泥橡胶软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 34410-2017 |
Classification and general technology of upper limb orthoses 上肢矫形器的分类及通用技术条件 |
China National Standards hoses |
English PDF |
| GB/T 5565.2-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 |
China National Standards hoses |
English PDF |
| GB/T 9574-2017 |
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards hoses |
English PDF |
| GB/T 5565.3-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 |
China National Standards hoses |
English PDF |
| GB/T 5565.1-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 |
China National Standards hoses |
English PDF |
| GB/T 18948-2017 |
Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards hoses |
English PDF |
| GB/T 33380-2016 |
Rubber hoses with large diameter—Tensile test 大型橡胶软管组合件 拉伸试验 |
China National Standards hoses |
English PDF |
| GB/T 33381-2016 |
Rubber hoses for automotive turbochargers－Specification 汽车涡轮增压器用橡胶软管 规范 |
China National Standards hoses |
English PDF |
| GB/T 33382-2016 |
Inner armoured rubber hoses and hose assemblies for conveying dredging soil 内铠装输泥橡胶软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 1186-2016 |
Rubber hoses,textile-reinforced,for compressed air－Specification 压缩空气用织物增强橡胶软管 规范 |
China National Standards hoses |
English PDF |
| GB/T 32476-2016 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 32474-2016 |
Rubber hoses and hose assemblies for petroleum drilling well control equipments 石油钻井井控设备用橡胶软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 2550-2016 |
Gas welding equipment—Rubber hoses for welding, cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 |
China National Standards hoses |
English PDF |
| GB/T 30659-2014 |
External limb prostheses and external orthoses―Requirements and test methods 假肢和矫形器 要求和试验方法 |
China National Standards hoses |
English PDF |
| GB/T 30658-2014 |
Prostheses and orthoses―Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation 假肢和矫形器 开具下肢假肢处方考虑的因素 |
China National Standards hoses |
English PDF |
| GB/T 30657-2014 |
Prostheses and orthoses―Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth 假肢和矫形器 描述下肢截肢或先天性下肢缺失患者活动量考虑的因素 |
China National Standards hoses |
English PDF |
| GB 10543-2014 |
Rubber hoses and hose assemblies for aircraft ground fuelling and defueling―Specification 飞机地面加油和排油用橡胶软管及软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 18425-2014 |
Rubber hoses and hose assemblies for steam―Test methods 蒸汽橡胶软管和软管组合件 试验方法 |
China National Standards hoses |
English PDF |
| GB/T 9572-2013 |
Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 |
China National Standards hoses |
English PDF |
| GB/T 5568-2013 |
Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards hoses |
English PDF |
| GB/T 5567-2013 |
Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 |
China National Standards hoses |
English PDF |
| GB/T 5563-2013 |
Rubber and plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 |
China National Standards hoses |
English PDF |
| GB/T 18422-2013 |
Rubber and plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 |
China National Standards hoses |
English PDF |
| GB/T 10544-2013 |
Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝缠绕增强外覆橡胶液压型 规范 |
China National Standards hoses |
English PDF |
| GB 29993-2013 |
Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 |
China National Standards hoses |
English PDF |
| GB/T 9576-2013 |
Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards hoses |
English PDF |
| GB/T 9575-2013 |
Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 |
China National Standards hoses |
English PDF |
| GB/T 9573-2013 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 |
China National Standards hoses |
English PDF |
| GB/T 18423-2013 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards hoses |
English PDF |
| GB/T 16591-2013 |
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification 输送无水氨用橡胶软管及软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 10546-2013 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa - Specification 在 2.5MPa及以下压力下输送液态或气态液化石油气（LPG）和天然气的橡胶软管及软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 28605-2012 |
Rubber and plastics tubing and hoses and hose assemblies for drinking water 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 7528-2011 |
Rubber and plastics hoses and hose assemblies - Vocabulary 橡胶和塑料软管及软管组合件 术语 |
China National Standards hoses |
English PDF |
| GB/T 14904-2011 |
Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 |
China National Standards hoses |
English PDF |
| GB/T 3683-2011 |
Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 |
China National Standards hoses |
English PDF |
| GB/T 24431-2009 |
Equipment and facilities in the prostheses and orthoses fitting units 假肢、矫形器装配机构设施设备 |
China National Standards hoses |
English PDF |
| GB/T 24146-2009 |
Rubber hoses and hose assemblies for use in oil burners - Specification 用于油燃烧器的橡胶软管和软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 24145-2009 |
Rubber hoses and hose assemblies for rotary drilling and vibration application - Specification 旋转钻探和减震用橡胶软管和软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB/T 24144-2009 |
Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies 消防软管 橡胶和塑料吸引软管和软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 24141.2-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards hoses |
English PDF |
| GB/T 24141.1-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分：柴油燃料 |
China National Standards hoses |
English PDF |
| GB/T 24134-2009 |
Rubber and plastics hoses - Assessment of ozone resistance under static conditions 橡胶和塑料软管 静态条件下耐臭氧性能的评价 |
China National Standards hoses |
English PDF |
| GB/T 24126-2009 |
Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel 橡胶和塑料软管及软管组合件 采购者、组装者、安装者和操作者使用指南 |
China National Standards hoses |
English PDF |
| GB/T 18948-2009 |
Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards hoses |
English PDF |
| GB/T 15908-2009 |
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification 塑料软管及软管组合件 液压用织物增强型 规范 |
China National Standards hoses |
English PDF |
| GB/T 14905-2009 |
Rubber and plastics hoses - Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards hoses |
English PDF |
| GB/T 14191.1-2009 |
Prosthetics and orthotics-vocabulary - Part 1: General terms for external limb prostheses and external orthoses 假肢学和矫形器学术语 第1部分：体外肢体假肢和体外矫形器的基本术语 |
China National Standards hoses |
English PDF |
| GB/T 14652.2-2009 |
Small craft - Non-fire-resistant fuel hoses 小艇 非耐火燃油软管 |
China National Standards hoses |
English PDF |
| GB/T 14652.1-2009 |
Small craft - Fire-resistant fuel hoses 小艇 耐火燃油软管 |
China National Standards hoses |
English PDF |
| GB/T 15907-2008 |
Rubber and plastics hoses - Method of test for flammability 橡胶和塑料软管 可燃性试验方法 |
China National Standards hoses |
English PDF |
| GB/T 12721-2007 |
Rubber hoses - Determination of abrasion resistance of the outer cover 橡胶软管 外覆层耐磨耗性能的测定 |
China National Standards hoses |
English PDF |
| GB/T 1186-2007 |
Rubber hoses,textile-reinforced,for compressed air-Specification 压缩空气用织物增强橡胶软管 |
China National Standards hoses |
English PDF |
| GB/T 5565-2006 |
Rubber or plastics hoses tubing - Bending tests 橡胶或塑料增强软管和非增强软管 弯曲试验 |
China National Standards hoses |
English PDF |
| GB/T 5564-2006 |
Rubber and plastics hoses - Subambient temperature flexibility tests 橡胶及塑料软管 低温曲挠试验 |
China National Standards hoses |
English PDF |
| GB 20689-2006 |
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases(LPGs) - Specification 分配液化石油气（LPGs)用橡胶软管及软管组合件规范 |
China National Standards hoses |
English PDF |
| GB/T 20462.2-2006 |
Thermoplastic tubing and hoses for automotive use―Part 2：Petroleum-based-fuel applications 汽车用热塑性非增强软管和软管 第2部分： 石油基燃油用 |
China National Standards hoses |
English PDF |
| GB/T 20462.1-2006 |
Thermoplastic tubing and hoses for automotive use―Part 1： Non-fuel applications 汽车用热塑性非增强软管和软管 第1部分: 非燃油用 |
China National Standards hoses |
English PDF |
| GB/T 20461-2006 |
Rubber hoses and hose assemblies for automobile power-steering systems ―Specification 汽车动力转向系统用橡胶软管和软管组合件 规范 |
China National Standards hoses |
English PDF |
| GB 20414-2006 |
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles―Specification 机动车用液化石油气的橡胶软管和软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards hoses |
English PDF |
| GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards hoses |
English PDF |
| GB/T 20023-2005 |
Rubber and/or plastics hoses and hoses assemblies for airless paint spraying 无气喷涂用橡胶和/或塑料软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 2351-2005 |
Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses 液压气动系统用硬管外径和软管内径 |
China National Standards hoses |
English PDF |
| GB/T 19544-2004 |
Classification and general technology of spinal orthoses 脊柱矫形器的分类及通用技术条件 |
China National Standards hoses |
English PDF |
| GB/T 5566-2003 |
Rubber or plastics hoses--Test method for crush resistance 橡胶或塑料软管 耐压扁试验方法 |
China National Standards hoses |
English PDF |
| GB/T 15329.1-2003 |
Rubber hosesand hose assemblies--Textile-reinforced hydraulic types--Specification--Part 1: Oil-based fluid applications 橡胶软管及软管组合件 织物增强液压型 第1部分:油基流体用 |
China National Standards hoses |
English PDF |
| GB 7542-2003 |
Rubber brake hoses for railway locomotive and car 铁路机车车辆制动用橡胶软管 |
China National Standards hoses |
English PDF |
| GB/T 19090-2003 |
Rubber hoses and hose assemblies for underground mining--Textile-reinforced air and water type 矿用输送空气和水的织物增强橡胶软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 18950-2003 |
Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions 橡胶和塑料软管 静态下耐紫外线性能测定 |
China National Standards hoses |
English PDF |
| GB/T 18949-2003 |
Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions 橡胶和塑料软管 动态条件下耐臭氧性能的评定 |
China National Standards hoses |
English PDF |
| GB/T 18947-2003 |
Rubber hoses and hose assemblies for underground mining--Wire-reinforced hydraulic type 矿用钢丝增强液压软管及软管组合件 |
China National Standards hoses |
English PDF |
| GB/T 18615-2002 |
Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses 波纹金属软管用非合金钢和不锈钢接头 |
China National Standards hoses |
English PDF |
| GB/T 9574-2001 |
Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure 橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率 |
China National Standards hoses |
English PDF |
| GB/T 7129-2001 |
Rubber or plastics hoses--Determinationof volumetric expansion 橡胶或塑料软管 容积膨胀的测定 |
China National Standards hoses |
English PDF |
| GB/T 18424-2001 |
Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance 橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定 |
China National Standards hoses |
English PDF |
| Find out:105Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
