Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 21109.2-2023 |
Functional safety of safety instrumented systems in the process industry - Part 2: Application guidelines for GB/T 21109.1-2022 {译} 过程工业领域安全仪表系统的功能安全 第2部分：GB/T 21109.1—2022的应用指南 |
China National Standards instrumented |
 English PDF |
| GB/T 21838.3-2022 |
Metallic materials - instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks {译} 金属材料 硬度和材料参数的仪器化压入试验 第3部分：标准块的标定 |
China National Standards instrumented |
English PDF |
| GB/T 21838.2-2022 |
Metallic materials - instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines {译} 金属材料 硬度和材料参数的仪器化压入试验 第2部分：试验机的检验和校准 |
China National Standards instrumented |
English PDF |
| GB/T 21109.1-2022 |
Functional safety of safety instrumented systems in the process industry - Part 1: Framework, definitions, system, hardware and application programming requirements {译} 过程工业领域安全仪表系统的功能安全 第1部分：框架、定义、系统、硬件和应用编程要求 |
China National Standards instrumented |
English PDF |
| GB/T 39635-2020 |
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test 金属材料 仪器化压入法测定压痕拉伸性能和残余应力 |
China National Standards instrumented |
English PDF |
| GB/T 21838.4-2020 |
Metallic materials—instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards instrumented |
English PDF |
| GB/T 21838.1-2019 |
Metallic materials—instrumented indentation test for hardness and materials parameters—Part 1:Test method 金属材料 硬度和材料参数的仪器化压入试验 第1部分：试验方法 |
China National Standards instrumented |
English PDF |
| GB/T 19748-2019 |
Metallic materials—Charpy V-notch pendulum impact test—instrumented test method 金属材料 夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards instrumented |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards instrumented |
English PDF |
| GB/T 32202-2015 |
Functional safety for safety instrumented system in oil and gas pipelines—Assessment code 油气管道安全仪表系统的功能安全 评估规范 |
China National Standards instrumented |
English PDF |
| GB/T 31228-2014 |
instrumented nanoindentation test―Terminology 仪器化纳米压入试验 术语 |
China National Standards instrumented |
English PDF |
| GB/T 50770-2013 |
Code for design of safety instrumented system in petrochemical engineering 石油化工安全仪表系统设计规范 |
China National Standards instrumented |
English PDF |
| GB/T 25898-2010 |
instrumented nanoindentation test - Indentation hardness and modulus of thin film 仪器化纳米压入试验方法 薄膜的压入硬度和弹性模量 |
China National Standards instrumented |
English PDF |
| GB/T 23467-2009 |
Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin 用假人评估轰燃条件下服装阻燃性能的测试方法 |
China National Standards instrumented |
English PDF |
| GB/T 22458-2008 |
General rules of instrumented nanoindentation test 仪器化纳米压入试验方法通则 |
China National Standards instrumented |
English PDF |
| GB/T 1043.1-2008 |
Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test 塑料 简支梁冲击性能的测定 第1部分：非仪器化冲击试验 |
China National Standards instrumented |
English PDF |
| GB/T 21838.3-2008 |
Metallic materials - instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards instrumented |
English PDF |
| GB/T 21838.2-2008 |
Metallic materials - instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准 |
China National Standards instrumented |
English PDF |
| GB/T 21838.4-2008 |
Metallic materials - instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压痕试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards instrumented |
English PDF |
| GB/T 21838.1-2008 |
Metallic materials - instrumented indentation test for hardness and materials parameters - Part 1: Test method 金属材料 硬度和材料参数的仪器化压痕试验 第1部分:试验方法 |
China National Standards instrumented |
English PDF |
| GB/T 21109.3-2007 |
Functional safety-Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels 过程工业领域安全仪表系统的功能安全 第3部分：确定要求的安全完整性等级的指南 |
China National Standards instrumented |
English PDF |
| GB/T 21109.2-2007 |
Functional safety-Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 过程工业领域安全仪表系统的功能安全 第2部分：GB/T 21109.1的应用指南 |
China National Standards instrumented |
English PDF |
| GB/T 21109.1-2007 |
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements 过程工业领域安全仪表系统的功能安全 第1部分：框架、定义、系统、硬件和软件要求 |
China National Standards instrumented |
English PDF |
| GB/T 19748-2005 |
Steel-Charpy V-notch pendulum impact test-instrumented test method 钢材夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards instrumented |
English PDF |
| Find out:24Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
