Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 22890.1-2024 |
Leather - Determination of water resistance of soft leather - Part 1: Repeated linear compression method (penetropyometer method) {译} 皮革-柔软皮革防水性能的测定-第1部分：反复线压缩法（透度计法） |
China National Standards linear |
 English PDF |
| GB/T 43610-2023 |
Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent growth direction of linear crystals {译} 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法 |
China National Standards linear |
English PDF |
| GB/T 43023-2023 |
Nonlinear Measurement Guidelines for RF Surface Acoustic Wave (SAW) Devices and Bulk Acoustic Wave (BAW) Devices {译} 射频声表面波（SAW）器件和体声波（BAW）器件的非线性测量指南 |
China National Standards linear |
English PDF |
| GB/T 21559.2-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 2: Static load ratings {译} 滚动轴承 直线运动滚动支承 第2部分：额定静载荷 |
China National Standards linear |
English PDF |
| GB/T 21559.1-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 1: Dynamic load ratings and rating life {译} 滚动轴承 直线运动滚动支承 第1部分：额定动载荷和额定寿命 |
China National Standards linear |
English PDF |
| GB/T 26958.61-2023 |
Geometric Product Specification (GPS) Filtering Part 61: linear Domain Filters Gaussian Filters {译} 产品几何技术规范（GPS） 滤波 第61部分：线性区域滤波器 高斯滤波器 |
China National Standards linear |
English PDF |
| GB/T 26958.60-2023 |
Geometric product specification (GPS) filtering - Part 60: linear domain filters - Basic concepts {译} 产品几何技术规范（GPS） 滤波 第60部分：线性区域滤波器 基本概念 |
China National Standards linear |
English PDF |
| GB/T 41932-2022 |
Plastics - Determination of fracture toughness (GIC and KIC) - linear elastic fracture mechanics (LEFM) method {译} 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 |
China National Standards linear |
English PDF |
| GB/T 41933-2022 |
Plastics - Determination of tension-tension fatigue crack growth - linear elastic fracture mechanics (LEFM) method {译} 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards linear |
English PDF |
| GB/T 24619-2021 |
Synchronous belt drives - Curvilinear profile systems G, H, R and S belts and pulleys 同步带传动 G、H、R、S齿型曲线齿同步带与带轮 |
China National Standards linear |
English PDF |
| GB/T 9966.16-2021 |
Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient 天然石材试验方法 第16部分：线性热膨胀系数的测定 |
China National Standards linear |
English PDF |
| GB/T 38762.1-2020 |
Geometrical product specifications (GPS)—Dimensional tolerancing—Part 1: linear sizes 产品几何技术规范（GPS） 尺寸公差 第1部分：线性尺寸 |
China National Standards linear |
English PDF |
| GB/T 38762.2-2020 |
Geometrical product specifications (GPS)—Dimensional tolerancing—Part 2: Dimensions other than linear or angular sizes 产品几何技术规范（GPS） 尺寸公差 第2部分：除线性、角度尺寸外的尺寸 |
China National Standards linear |
English PDF |
| GB/T 1800.2-2020 |
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表 |
China National Standards linear |
English PDF |
| GB/T 1800.1-2020 |
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础 |
China National Standards linear |
English PDF |
| GB/T 32383-2020 |
General technical specification for linear motor vehicles for urban rail transit 城市轨道交通直线电机车辆通用技术条件 |
China National Standards linear |
English PDF |
| GB/T 26958.21-2020 |
Geometrical product specifications (GPS)—Filtration—Part 21: linear profile filters: Gaussian filters 产品几何技术规范（GPS） 滤波 第21部分：线性轮廓滤波器 高斯滤波器 |
China National Standards linear |
English PDF |
| GB/T 36260.2-2018 |
Detection ability - Part 2: Method for determining the detection limit of linear calibration 检出能力-第2部分：线性校准情形检出限的确定方法 |
China National Standards linear |
English PDF |
| GB/T 33260.2-2018 |
Capability of detection—Part 2: Methodology in the linear calibration case 检出能力 第2部分：线性校准情形检出限的确定方法 |
China National Standards linear |
English PDF |
| GB/T 33260.5-2018 |
Capability of detection—Part 5: Methodology in the linear and nonlinear calibration cases 检出能力 第5部分：非线性校准情形检出限的确定方法 |
China National Standards linear |
English PDF |
| GB/T 36800.2-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料 热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定 |
China National Standards linear |
English PDF |
| GB/T 34898-2017 |
Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element 微机电系统（MEMS）技术 MEMS谐振敏感元件非线性振动测试方法 |
China National Standards linear |
English PDF |
| GB/T 16857.2-2017 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions 产品几何技术规范（GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机 |
China National Standards linear |
English PDF |
| GB/T 34520.3-2017 |
Test methods for continuous silicon carbide fiber—Part 3：linear density and density 连续碳化硅纤维测试方法 第3部分：线密度和密度 |
China National Standards linear |
English PDF |
| GB/T 34634-2017 |
Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument 产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择 |
China National Standards linear |
English PDF |
| GB/T 34115-2017 |
General specification for permanent magnet linear motor 永磁式直线电动机通用技术条件 |
China National Standards linear |
English PDF |
| GB/T 35465.2-2017 |
Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data 聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析 |
China National Standards linear |
English PDF |
| GB/T 3810.8-2016 |
Test methods of ceramic tiles—Part 8: Determination of linear thermal expansion 陶瓷砖试验方法 第8部分：线性热膨胀的测定 |
China National Standards linear |
English PDF |
| GB/T 29023.2-2016 |
Measurement and characterization of particles by acoustic method—Part 2: Guidelines for linear theory 超声法颗粒测量与表征 第2部分：线性理论准则 |
China National Standards linear |
English PDF |
| GB/T 32349-2015 |
Railway applications—Electric traction—Short-primary type linear induction motors (LIM) fed by power converters 轨道交通 电力牵引 变流器供电的短初级直线感应电动机 |
China National Standards linear |
English PDF |
| GB/T 16920-2015 |
Glass—Determination of coefficient of mean linear thermal expansion 玻璃 平均线热膨胀系数的测定 |
China National Standards linear |
English PDF |
| GB/T 32383-2015 |
linear motor vehicles for urban mass transit 城市轨道交通 直线电机车辆 |
China National Standards linear |
English PDF |
| GB/T 32322.2-2015 |
Rolling bearings—Profiled rail guides for linear motion rolling bearings—Part 2：Boundary dimensions and tolerances for series 4 and 5 滚动轴承 直线运动滚动支承成型导轨副 第2部分：4、5系列外形尺寸和公差 |
China National Standards linear |
English PDF |
| GB/T 32322.1-2015 |
Rolling bearings—Profiled rail guides for linear motion rolling bearings—Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 滚动轴承 直线运动滚动支承成型导轨副 第1部分：1、2、3系列外形尺寸和公差 |
China National Standards linear |
English PDF |
| GB/T 5594.3-2015 |
Test methods for properties of structure ceramic used in electronic components and device—Part 3: Test method for mean coefficient of linear expansion 电子元器件结构陶瓷材料性能测试方法 第3部分：平均线膨胀系数测试方法 |
China National Standards linear |
English PDF |
| GB/T 30371-2013 |
Standard of electron linear accelerator engineering for non-destructive testing 无损检测用电子直线加速器工程通用规范 |
China National Standards linear |
English PDF |
| GB/T 30086-2013 |
Determination of axial coefficient of linear expansion of plastics pipes for water supply 给水塑料管道轴向线膨胀系数试验方法 |
China National Standards linear |
English PDF |
| GB/T 7690.1-2013 |
Reinforcements - Test method for yarns - Part 1: Determination of linear density 增强材料 纱线试验方法 第1部分：线密度的测定 |
China National Standards linear |
English PDF |
| GB/T 29820.1-2013 |
Assessment of uncertainty in calibration and use of flow measurement devices - Part 1: linear calibration relationships 流量测量装置校准和使用不确定度的评估 第1部分：线性校准关系 |
China National Standards linear |
English PDF |
| GB/T 29719-2013 |
Rolling bearings - linear motion rolling bearings - Vocabulary 滚动轴承 直线运动滚动支承 词汇 |
China National Standards linear |
English PDF |
| GB/T 19673.2-2013 |
Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions and tolerances for series 5 滚动轴承 套筒型直线球轴承附件 第2部分：5系列外形尺寸和公差 |
China National Standards linear |
English PDF |
| GB/T 19673.1-2013 |
Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1：Boundary dimensions and tolerances for series 1 and 3 滚动轴承 套筒型直线球轴承附件 第1部分：1、3系列外形尺寸和公差 |
China National Standards linear |
English PDF |
| GB/T 29016-2012 |
linear filling machine with high viscosity fluid 直线式粘流体灌装机 |
China National Standards linear |
English PDF |
| GB/T 6495.10-2012 |
Photovoltaic devices - Part 10：Methods of linearity measurement 光伏器件 第10部分：线性特性测量方法 |
China National Standards linear |
English PDF |
| GB/T 29256.5-2012 |
Textiles - Woven fabrics - Construction - Methods of analysis - Part 5: Determination of linear density of yarn removed from fabric 纺织品 机织物结构分析方法 第5部分：织物中拆下纱线线密度的测定 |
China National Standards linear |
English PDF |
| GB/T 16940-2012 |
Rolling bearings - Sleeve type linear ball bearings - Boundary dimensions and tolerances 滚动轴承 套筒型直线球轴承 外形尺寸和公差 |
China National Standards linear |
English PDF |
| GB/T 28857-2012 |
Direct-current linear variable differential transformer (DC-DC LVDT)displacement transducers 直流差动变压器式位移传感器 |
China National Standards linear |
English PDF |
| GB/T 27558-2011 |
Rolling bearings - linear motion rolling bearings - Classification 滚动轴承 直线运动滚动支承 分类 |
China National Standards linear |
English PDF |
| GB/T 27557-2011 |
Rolling bearings - linear motion rolling bearings - Identification code 滚动轴承 直线运动滚动支承 代号方法 |
China National Standards linear |
English PDF |
| GB/Z 26958.29-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 29: linear profile filters：Spline wavelets 产品几何技术规范(GPS) 滤波 第29部分：线性轮廓滤波器 样条小波 |
China National Standards linear |
English PDF |
| GB/Z 26958.22-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 22: linear profile filters : Spline filters 产品几何技术规范(GPS) 滤波 第22部分：线性轮廓滤波器 样条滤波器 |
China National Standards linear |
English PDF |
| GB/Z 26958.20-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 20: linear profile filters: Basic concepts 产品几何技术规范(GPS) 滤波 第20部分：线性轮廓滤波器 基本概念 |
China National Standards linear |
English PDF |
| GB/T 27408-2010 |
Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship 实验室质量控制 非标准测试方法的有效性评价 线性关系 |
China National Standards linear |
English PDF |
| GB/T 7962.16-2010 |
Test methods of colourless optical glass - Part 16: linear thermal expansion coefficient，transformation temperature and yield point temperature 无色光学玻璃测试方法 第16部分：线膨胀系数、转变温度和弛垂温度 |
China National Standards linear |
English PDF |
| GB/T 26228.1-2010 |
Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 1: linear symbols 信息技术 自动识别与数据采集技术 条码检测仪一致性规范 第1部分：一维条码 |
China National Standards linear |
English PDF |
| GB/T 26074-2010 |
Germanium monocrystal-measurement of resistivity-DC linear four-point probe 锗单晶电阻率直流四探针测量方法 |
China National Standards linear |
English PDF |
| GB/T 18400.4-2010 |
Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards linear |
English PDF |
| GB/T 25144-2010 |
Determination of coefficient of mean linear thermal expansion for vitreous and porcelain enamels 搪玻璃釉平均线热膨胀系数的测定方法 |
China National Standards linear |
English PDF |
| GB/T 22554-2010 |
linear calibration using reference materials 基于标准样品的线性校准 |
China National Standards linear |
English PDF |
| GB/Z 24638-2009 |
Geometrical product specifications (GPS) - linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii 产品几何技术规范（GPS) 线性和角度尺寸与公差标注+/-极限规范 台阶尺寸、距离、角度尺寸和半径 |
China National Standards linear |
English PDF |
| GB/T 24619-2009 |
Curvilinear toothed synchronous belt drives 曲线齿同步带传动 |
China National Standards linear |
English PDF |
| GB/T 14141-2009 |
Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array 硅外延层、扩散层和离子注入层薄层电阻的测定 直排四探针法 |
China National Standards linear |
English PDF |
| GB/T 4743-2009 |
Textiles - Yarn from packages - Determination of linear density(mass per unit length) by the skein methord 纺织品 卷装纱 绞纱法线密度的测定 |
China National Standards linear |
English PDF |
| GB/T 23325-2009 |
Textiles - Determination of surfactant - linear alkylbenzene sulfonates 纺织品 表面活性剂的测定 线性烷基苯磺酸盐 |
China National Standards linear |
English PDF |
| GB/T 2900.85-2009 |
Electrotechnical terminology - Mathematics - General concepts and linear algebra 电工术语 数学 一般概念和线性代数 |
China National Standards linear |
English PDF |
| GB/T 8447-2008 |
Industrial linear alkylbenzene sulfonic acid 工业直链烷基苯磺酸 |
China National Standards linear |
English PDF |
| GB/T 22453-2008 |
Non-linear optical borate crystal devices measuring method 硼酸盐非线性光学单晶元件质量测试方法 |
China National Standards linear |
English PDF |
| GB/T 22452-2008 |
General technical condition of non-linear optical borate crystal devices 硼酸盐非线性光学单晶元件通用技术条件 |
China National Standards linear |
English PDF |
| GB/T 16535-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique 精细陶瓷线热膨胀系数试验方法 顶杆法 |
China National Standards linear |
English PDF |
| GB/T 16256-2008 |
Textile fibres - Test method for linear density - Vibroscope method 纺织纤维 线密度试验方法 振动仪法 |
China National Standards linear |
English PDF |
| GB/T 1036-2008 |
Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer 塑料 -30℃～30℃线膨胀系数的测定 石英膨胀计法 |
China National Standards linear |
English PDF |
| GB/T 14343-2008 |
Testing method for linear density of man-made filament yarns 化学纤维 长丝线密度试验方法 |
China National Standards linear |
English PDF |
| GB/T 14335-2008 |
Testing method for linear density of man-made staple fibres 化学纤维 短纤维线密度试验方法 |
China National Standards linear |
English PDF |
| GB/T 17686-2008 |
Cotton fibre - Determination of linear density - Array method 棉纤维 线密度试验方法 排列法 |
China National Standards linear |
English PDF |
| GB/T 21559.2-2008 |
Rolling bearings - linear motion rolling bearings - Part 2: Static load ratings 滚动轴承 直线运动滚动支承 第2部分: 额定静载荷 |
China National Standards linear |
English PDF |
| GB/T 21559.1-2008 |
Rolling bearings - linear motion rolling bearings - Part 1: Dynamic load ratings and rating life 滚动轴承 直线运动滚动支承 第1部分：额定动载荷和额定寿命 |
China National Standards linear |
English PDF |
| GB/T 6100-2007 |
Test method for linear density of cotton fibres - Cut middles method 棉纤维线密度试验方法 中段称重法 |
China National Standards linear |
English PDF |
| GB/T 21006-2007 |
Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - linearity of intensity scale 表面化学分析 X射线光电子能谱仪和俄歇电子能谱仪 强度标的线性 |
China National Standards linear |
English PDF |
| GB/T 20957.4-2007 |
Test conditions for precision machining centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards linear |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards linear |
English PDF |
| GB/T 20639-2006 |
Artificial pollution testing of non-linear resistor type gapped arresters 有间隙阀式避雷器人工污秽试验 |
China National Standards linear |
English PDF |
| GB/T 20673-2006 |
Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures 硬质泡沫塑料 低于环境温度的线膨胀系数的测定 |
China National Standards linear |
English PDF |
| GB/T 3810.8-2006 |
Test methods of ceramic tiles Part 8: Determination of linear thermal expansion 陶瓷砖试验方法 第8部分:线性热膨胀的测定 |
China National Standards linear |
English PDF |
| GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分：定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards linear |
English PDF |
| GB/T 2572-2005 |
Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion 纤维增强塑料平均线膨胀系数试验方法 |
China National Standards linear |
English PDF |
| GB/T 2822-2005 |
Standard linear dimensions 标准尺寸 |
China National Standards linear |
English PDF |
| GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards linear |
English PDF |
| GB/T 18500.2-2001 |
Semiconductor devices--Integrated circuits--Part 4:Interface integrated circuits--Section 2:Blank detail specification for linear analogue-to-digital converters(ADC) 半导体器件 集成电路 第4部分:接口集成电路 第二篇:线性模拟/数字转换器(ADC)空白详细规范 |
China National Standards linear |
English PDF |
| GB/T 18500.1-2001 |
Semiconductor devices--Integrated circuits--Part 4:Interface integrated circuits--Section 1:Blank detail specification for linear digital-to-analogue converters(DAC) 半导体器件 集成电路 第4部分:接口集成电路 第一篇:线性数字/模拟转换器(DAC)空白详细规范 |
China National Standards linear |
English PDF |
| GB/T 1804-2000 |
General tolerances--Tolerances for linear and angular dimensions without individual tolerance indications 一般公差 未注公差的线性和角度尺寸的公差 |
China National Standards linear |
English PDF |
| GB/T 17550.4-2000 |
Identification cards--Optical memory cards--linear recording method--Part 4:Logical data structures 识别卡 光记忆卡 线性记录方法 第4部分:逻辑数据结构 |
China National Standards linear |
English PDF |
| GB/T 17550.3-1998 |
Identification cards--Optical memory cards--linear recording method--Part 3:Optical properties and characteristics 识别卡 光记忆卡 线性记录方法 第3部分:光属性和特性 |
China National Standards linear |
English PDF |
| GB/T 17550.2-1998 |
Identification cards--Optical memory cards--linear recording method--Part 2:Dimensions and location of the accessible optical area 识别卡 光记忆卡 线性记录方法 第2部分:可访问光区域的尺寸和位置 |
China National Standards linear |
English PDF |
| GB/T 17550.1-1998 |
Identification cards--Optical memory cards--linear recording method--Part 1:Physical characteristics 识别卡 光记忆卡 线性记录方法 第1部分:物理特性 |
China National Standards linear |
English PDF |
| GB/T 16920-1997 |
Glass--Determination of coefficient of mean linear thermal expansion 玻璃 平均线热膨胀系数的测定 |
China National Standards linear |
English PDF |
| GB/T 6342-1996 |
Cellular plastics and rubbers--Determination of linear dimensions 泡沫塑料与橡胶 线性尺寸的测定 |
China National Standards linear |
English PDF |
| GB/T 14235.4-1993 |
Testing method for linear contraction of pattern materials in investment casting 熔模铸造模料 线收缩率测定方法 |
China National Standards linear |
English PDF |
| GB/T 7017-1986 |
Method of measurement of non-linearity in resistors 电阻器非线性测量方法 |
China National Standards linear |
English PDF |
| GB/T 2689.4-1981 |
Life test and acceleration life test--Optimal linear deflection-free--Evaluation of Weibull distributions 寿命试验和加速寿命试验的最好线性无偏估计法(用于威布尔分布) |
China National Standards linear |
English PDF |
| GB/T 2689.3-1981 |
Life test and acceleration life test--Simple linear deflection-free--Evaluation ofWeibull distributions 寿命试验和加速寿命试验的简单线性无偏估计法(用于威布尔分布) |
China National Standards linear |
English PDF |
| Find out:100Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
