Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44183-2024 |
Technical requirements and measurement methods for performance of mobile terminals supporting Beidou-space radio frequency performance {译} 支持北斗的移动终端性能技术要求及测量方法-空间射频性能 |
China National Standards measurement,and |
 English PDF |
| GB/T 44182-2024 |
Technical requirements and measurement methods for performance of mobile terminals supporting Beidou-electromagnetic compatibility performance {译} 支持北斗的移动终端性能技术要求及测量方法-电磁兼容性能 |
China National Standards measurement,and |
English PDF |
| GB/T 6113.106-2024 |
Specifications for radio disturbance and immunity measuring equipment and measurement methods - Part 1-6: Radio disturbance and immunity measuring equipment - EMC antenna calibration {译} 无线电骚扰和抗扰度测量设备和测量方法规范-第1-6部分:无线电骚扰和抗扰度测量设备-EMC天线校准 |
China National Standards measurement,and |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-Ultrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards measurement,and |
English PDF |
| GB/T 44088-2024 |
Technical requirements and test methods for the measurement module of the Beidou satellite navigation system {译} 北斗卫星导航系统测量型模块技术要求及测试方法 |
China National Standards measurement,and |
English PDF |
| GB/T 12674-2024 |
Measurement methods for mass parameters of automobiles, trailers and automobile trains {译} 汽车、挂车及汽车列车质量参数测量方法 |
China National Standards measurement,and |
English PDF |
| GB/Z 44005.1-2024 |
Nanotechnology - Clay nanomaterials - Part 1: Properties and measurement methods of layered clays {译} 纳米技术-黏土纳米材料-第1部分：层状黏土的特性及测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards measurement,and |
English PDF |
| GB/T 43916-2024 |
Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainty of capacitance diaphragm vacuum gauges {译} 真空技术-真空计-电容薄膜真空计的规范、校准和测量不确定度 |
China National Standards measurement,and |
English PDF |
| GB/T 44021.1-2024 |
Audio, video and related equipment - Power consumption measurement - Part 1: General Principles {译} 音视频及相关设备-功耗测量-第1部分：总则 |
China National Standards measurement,and |
English PDF |
| GB/T 44021.2-2024 |
Audio, video and related equipment - Power consumption measurement - Part 2: Test signals and media {译} 音视频及相关设备-功耗测量-第2部分：测试信号和媒介 |
China National Standards measurement,and |
English PDF |
| GB/T 44021.3-2024 |
Audio, video and related equipment - Power consumption measurement - Part 3: Television sets {译} 音视频及相关设备-功耗测量-第3部分：电视机 |
China National Standards measurement,and |
English PDF |
| GB/T 44021.4-2024 |
Audio, video and related equipment - Power consumption measurement - Part 4: Video recording equipment {译} 音视频及相关设备-功耗测量-第4部分：录像设备 |
China National Standards measurement,and |
English PDF |
| GB/T 44021.5-2024 |
Audio, video and related equipment - Power consumption measurement - Part 5: Set-top boxes (STBs) {译} 音视频及相关设备-功耗测量-第5部分：机顶盒（STB） |
China National Standards measurement,and |
English PDF |
| GB/T 44021.6-2024 |
Audio, video and related equipment - Power consumption measurement - Part 6: Audio equipment {译} 音视频及相关设备-功耗测量-第6部分：音频设备 |
China National Standards measurement,and |
English PDF |
| GB/T 31497-2024 |
Information technology - Security technology - Information security management - Monitoring, measurement, analysis and evaluation {译} 信息技术-安全技术-信息安全管理-监视、测量、分析和评价 |
China National Standards measurement,and |
English PDF |
| GB/T 43648-2024 |
Standing biomass model and carbon measurement parameters of major tree species {译} 主要树种立木生物量模型与碳计量参数 |
China National Standards measurement,and |
English PDF |
| GB/T 34961.4-2024 |
Information technology - Implementation and operation of user building cluster cabling - Part 4: Measurement of end-to-end (E2E) links, modular plug-terminated links (MPTLs) and direct-connect cabling {译} 信息技术-用户建筑群布缆的实现和操作-第4部分：端到端（E2E）链路、模块化插头端接链路（MPTLs）和直连布缆的测量 |
China National Standards measurement,and |
English PDF |
| GB/T 43784-2024 |
Performance characterization and measurement method of single photon source {译} 单光子源性能表征及测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 43785-2024 |
Performance characterization and measurement method of optical clock {译} 光钟性能表征及测量方法 |
China National Standards measurement,and |
English PDF |
| GB/Z 43684-2024 |
Nanotechnology - Description, measurement and dimensional quality parameters of gratings {译} 纳米技术-光栅的描述、测量和尺寸质量参数 |
China National Standards measurement,and |
English PDF |
| GB/T 42791-2024 |
Corrosion of Metals and Alloys - Electrochemical Guidelines for noise measurement corrosion test {译} 航空用铝合金锻件通用技术规范 |
China National Standards measurement,and |
English PDF |
| GB/T 43780-2024 |
Nanotechnology - Measurement methods for carrier mobility and sheet resistance of sub-nanometer graphene films {译} 制造装备智能化通用技术要求 |
China National Standards measurement,and |
English PDF |
| GB/T 43695-2024 |
Requirements and measurement methods for energy conversion efficiency of lithium-ion batteries and battery packs {译} 锂离子电池和电池组能源转换效率要求和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 43537-2023 |
Sound system equipment Headphones and personal music players Maximum sound pressure level measurement method {译} 声系统设备 耳机及个人音乐播放器 最大声压级测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 43517-2023 |
Ergonomics of the physical environment Assessment of the environment through environmental surveys (measurements of physical quantities and subjective human evaluations) {译} 物理环境的人类工效学 通过环境调查（物理量测量和人的主观评价）对环境进行评估 |
China National Standards measurement,and |
English PDF |
| GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics {译} 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards measurement,and |
English PDF |
| GB/T 35065.2-2023 |
Wet natural gas flow measurement Part 2: Flowmeter test and evaluation methods {译} 湿天然气流量测量 第2部分：流量计测试和评价方法 |
China National Standards measurement,and |
English PDF |
| GB/T 20818.22-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 22: List of properties (LOPs) for electronic data exchange of valve body assemblies {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第22部分：阀体总成电子数据交换用属性列表(LOPs) |
China National Standards measurement,and |
English PDF |
| GB/T 20818.16-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 16: List of properties (LOPs) for electronic data exchange of density measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第16部分：密度测量设备电子数据交换用属性列表(LOPs) |
China National Standards measurement,and |
English PDF |
| GB/T 17626.39-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 39: Close range radiated field immunity test {译} 电磁兼容 试验和测量技术 第39部分：近距离辐射场抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: Power quality measurement methods {译} 电磁兼容 试验和测量技术 第30部分：电能质量测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.3-2023 |
Electromagnetic compatibility Testing and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test {译} 电磁兼容 试验和测量技术 第3部分：射频电磁场辐射抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/Z 43592.1-2023 |
Nanotechnology Magnetic nanomaterials Part 1: Characterization and measurement specifications of magnetic nanosuspensions {译} 纳米技术 磁性纳米材料 第1部分：磁性纳米悬浮液的特性和测量规范 |
China National Standards measurement,and |
English PDF |
| GB/Z 6113.404-2023 |
Specification for radio disturbance and immunity measuring equipment and measurement methods Part 4-4: Uncertainty, statistics and limit value modeling Statistics of complaints and limit value calculation model for the protection of radio services {译} 无线电骚扰和抗扰度测量设备和测量方法规范 第4-4部分：不确定度、统计学和限值建模 投诉的统计和保护无线电业务的限值计算模型 |
China National Standards measurement,and |
English PDF |
| GB/T 43373-2023 |
Space data and information transmission system Deep space measurement and control pseudo code ranging technical requirements {译} 空间数据与信息传输系统 深空测控伪码测距技术要求 |
China National Standards measurement,and |
English PDF |
| GB/T 30117.4-2023 |
Photobiosafety of lamps and lamp systems Part 4: Measurement methods {译} 灯和灯系统的光生物安全 第4部分：测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 13894-2023 |
Petroleum and liquid petroleum products Level measurement Manual methods {译} 石油和液体石油产品 液位测量 手工法 |
China National Standards measurement,and |
English PDF |
| GB/T 32592-2023 |
Rail transit current receiving system Requirements and verification for dynamic interaction measurement between pantograph and catenary {译} 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证 |
China National Standards measurement,and |
English PDF |
| GB/T 40853.2-2023 |
High frequency inductive components Electrical characteristics and measurement methods Part 2: Rated current of inductors for DC-DC converters {译} 高频感性元件 电特性及其测量方法 第2部分：DC-DC变换器用电感器额定电流 |
China National Standards measurement,and |
English PDF |
| GB/T 43248-2023 |
Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz {译} 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 22553-2023 |
Guidelines for assessing measurement uncertainty using estimates of repeatability, reproducibility and correctness {译} 利用重复性、再现性和正确度的估计值评定测量不确定度的指南 |
China National Standards measurement,and |
English PDF |
| GB/T 43024.2-2023 |
Measurement techniques for piezoelectric, dielectric and electrostatic oscillators Part 2: Phase jitter measurement methods {译} 压电、介电和静电振荡器的测量技术 第2部分:相位抖动测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 43023-2023 |
Nonlinear Measurement Guidelines for RF Surface Acoustic Wave (SAW) Devices and Bulk Acoustic Wave (BAW) Devices {译} 射频声表面波（SAW）器件和体声波（BAW）器件的非线性测量指南 |
China National Standards measurement,and |
English PDF |
| GB/T 42968.1-2023 |
Integrated circuits - Electromagnetic immunity measurements - Part 1: General conditions and definitions {译} 集成电路 电磁抗扰度测量 第1部分：通用条件和定义 |
China National Standards measurement,and |
English PDF |
| GB/T 40602.3-2023 |
Radio interference from antennas and receiving systems Part 3: Site measurements Compact site performance verification methods {译} 天线及接收系统的无线电干扰 第3部分：场地测量 紧缩场场地性能确认方法 |
China National Standards measurement,and |
English PDF |
| GB/T 12113-2023 |
Methods of measurement of touch current and protective conductor current {译} 接触电流和保护导体电流的测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42843.1-2023 |
Microbubble Technology Measurement Sampling and Sample Preparation Part 1: Ultrafine Bubble Water Dispersion System {译} 微细气泡技术 测量取样及样品制备 第1部分：超细气泡水分散体系 |
China National Standards measurement,and |
English PDF |
| GB/T 42732-2023 |
Nanotechnology Size distribution and concentration measurement of inorganic nanoparticles in aqueous phase Single particle inductively coupled plasma mass spectrometry {译} 纳米技术 水相中无机纳米颗粒的尺寸分布和浓度测量 单颗粒电感耦合等离子体质谱法 |
China National Standards measurement,and |
English PDF |
| GB/T 20818.15-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 15: List of properties (LOPs) for electronic data exchange of level measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第15部分：物位测量设备电子数据交换用属性列表(LOPs) |
China National Standards measurement,and |
English PDF |
| GB/T 20818.14-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 14: List of properties (LOP) for electronic data exchange of temperature measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第14部分：温度测量设备电子数据交换用属性列表(LOP) |
China National Standards measurement,and |
English PDF |
| GB/T 20818.13-2023 |
Industrial process measurement and control. Data structures and elements in process equipment catalogs. Part 13: List of properties (LOP) for electronic data exchange of pressure measuring equipment. {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第13部分：压力测量设备电子数据交换用属性列表（LOP） |
China National Standards measurement,and |
English PDF |
| GB/T 42887-2023 |
Digital camera measurement of shooting lag, shutter lag, shooting speed and startup time {译} 数码照相机 拍摄时滞、快门时滞、拍摄速度和开机时间的测量 |
China National Standards measurement,and |
English PDF |
| GB/T 10593.2-2023 |
Measurement methods for environmental parameters of electrical and electronic products Part 2: Salt spray {译} 电工电子产品环境参数测量方法 第2部分：盐雾 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.11-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 11: Immunity tests for voltage dips, short interruptions and voltage changes for equipment with input current less than or equal to 16 A per phase {译} 电磁兼容 试验和测量技术 第11部分：对每相输入电流小于或等于16 A设备的电压暂降、短时中断和电压变化抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/T 42646-2023 |
Layout and measurement method of spaceborne laser altimeter site calibration detector {译} 星载激光测高仪场地定标探测器布设与测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 6683.3-2023 |
Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods {译} 石油及相关产品 测量方法与结果精密度 第3部分：试验方法已发布精密度数据的监测和验证 |
China National Standards measurement,and |
English PDF |
| GB/T 30256-2023 |
Energy Savings measurement and Verification Technical Requirements Motor System {译} 节能量测量和验证技术要求 电机系统 |
China National Standards measurement,and |
English PDF |
| GB/T 42687-2023 |
Ships and marine technology - Marine cranes - Noise requirements and measurement methods {译} 船舶与海洋技术 船用起重机 噪声要求与测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42567.3-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters {译} 工业过程测量变送器试验的参比条件和程序 第3部分：温度变送器的特定程序 |
China National Standards measurement,and |
English PDF |
| GB/T 42567.2-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters {译} 工业过程测量变送器试验的参比条件和程序 第2部分：压力变送器的特定程序 |
China National Standards measurement,and |
English PDF |
| GB/T 42567.1-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters {译} 工业过程测量变送器试验的参比条件和程序 第1部分：所有类型变送器的通用程序 |
China National Standards measurement,and |
English PDF |
| GB/T 16732-2023 |
Units of measurement and symbols for building heating, ventilation, air conditioning and purification equipment {译} 建筑供暖通风空调净化设备 计量单位及符号 |
China National Standards measurement,and |
English PDF |
| GB/T 8190.4-2023 |
Reciprocating internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses {译} 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态和瞬态试验循环 |
China National Standards measurement,and |
English PDF |
| GB/T 8190.1-2023 |
Reciprocating internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions {译} 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量系统 |
China National Standards measurement,and |
English PDF |
| GB/T 41232.3-2023 |
Nanofabrication Key Control Properties Nanoscale Energy Storage Part 3: Measurement of Contact Resistivity and Coating Resistivity of Nanomaterials {译} 纳米制造 关键控制特性 纳米储能 第3部分：纳米材料接触电阻率和涂层电阻率的测试 |
China National Standards measurement,and |
English PDF |
| GB/T 42749.3-2023 |
Information Technology IT Enablement Services Business Process Outsourcing (ITES-BPO) Life Cycle Processes Part 3: Measurement Framework (MF) and Organizational Maturity Model (OMM) {译} 信息技术 IT赋能服务业务过程外包（ITES-BPO）生存周期过程 第3部分：度量框架（MF）和组织成熟度模型(OMM) |
China National Standards measurement,and |
English PDF |
| GB/T 15879.604-2023 |
Mechanical standardization of semiconductor devices - Part 6-4: General rules for drawing outline drawings of surface mount semiconductor device packages - Dimensional measurement methods for ball array (BGA) packages {译} 半导体器件的机械标准化 第6-4部分：表面安装半导体器件封装外形图绘制的一般规则 焊球阵列（BGA）封装的尺寸测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42588-2023 |
Systems and software engineering Functional size measurement NESMA method {译} 系统与软件工程 功能规模测量 NESMA方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42566-2023 |
Systems and Software Engineering Functional Size Measurement MkII Function Point Analysis Method {译} 系统与软件工程 功能规模测量 MkII功能点分析方法 |
China National Standards measurement,and |
English PDF |
| GB/Z 17626.33-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 33: Measurement methods for high power transient parameters {译} 电磁兼容 试验和测量技术 第33部分：高功率瞬态参数测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 33521.31-2023 |
Mechanical vibrations - Ground-induced structure-borne noise and ground-borne vibrations from rail systems - Part 31: Guidelines for field measurements for the assessment of human exposure in buildings {译} 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第31部分：建筑物内人体暴露评价的现场测量指南 |
China National Standards measurement,and |
English PDF |
| GB/T 42403-2023 |
Lasers and laser-related equipment - Measurement methods for laser spectral characteristics {译} 激光器和激光相关设备 激光光谱特性测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 18779.3-2023 |
Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment - Part 3: Guidance on reaching consensus on the expression of measurement uncertainty {译} 产品几何技术规范（GPS） 工件与测量设备的测量检验 第3部分：关于测量不确定度表述达成共识的指南 |
China National Standards measurement,and |
English PDF |
| GB/T 18779.2-2023 |
Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification {译} 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分：GPS测量、测量设备校准和产品验证中的测量不确定度评估指南 |
China National Standards measurement,and |
English PDF |
| GB/T 42381.8-2023 |
Data Quality Part 8: Information and Data Quality: Concepts and Measurement {译} 数据质量 第8部分：信息和数据质量：概念和测量 |
China National Standards measurement,and |
English PDF |
| GB/T 42158-2023 |
Micro-Electro-Mechanical Systems (MEMS) Technology-Description and Measurement Methods of Micro-grooves and Pyramidal Needle Structures {译} 微机电系统（MEMS）技术 微沟槽和棱锥式针结构的描述和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42469-2023 |
Nanotechnology -- Antimicrobial silver nanoparticles -- General principles of properties and methods of measurement {译} 纳米技术 抗菌银纳米颗粒 特性及测量方法通则 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.12-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 12: Ring wave immunity test {译} 电磁兼容 试验和测量技术 第12部分：振铃波抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/T 42486-2023 |
Hair fiber length measurement method Random whisker image method {译} 毛型纤维长度测量法 随机须丛影像法 |
China National Standards measurement,and |
English PDF |
| GB/T 42125.14-2023 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes {译} 测量、控制和实验室用电气设备的安全要求 第14部分：实验室用分析和其他目的自动和半自动设备的特殊要求 |
China National Standards measurement,and |
English PDF |
| GB/T 42449-2023 |
Systems and software engineering Functional size measurement IFPUG method {译} 系统与软件工程 功能规模测量 IFPUG方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42452-2023 |
Systems and Software Engineering Functional Size Measurement COSMIC Method {译} 系统与软件工程 功能规模测量 COSMIC方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42448-2023 |
System and software engineering Functional scale measurement FiSMA1.1 method {译} 系统与软件工程 功能规模测量 FiSMA1.1方法 |
China National Standards measurement,and |
English PDF |
| GB/T 19889.7-2022 |
Acoustics - Measurement of sound insulation of buildings and building components - Part 7: In situ measurement of impact sound insulation {译} 声学 建筑和建筑构件隔声测量 第7部分：撞击声隔声的现场测量 |
China National Standards measurement,and |
English PDF |
| GB/T 41448-2022 |
Geographic information observation and measurement {译} 地理信息 观测与测量 |
China National Standards measurement,and |
English PDF |
| GB/T 41467-2022 |
measurement and calculation of spot color gradation in printing technology {译} 印刷技术 专色阶调值的测量与计算 |
China National Standards measurement,and |
English PDF |
| GB/T 7966-2022 |
Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements 声学 超声功率测量 辐射力天平法及其要求 |
China National Standards measurement,and |
English PDF |
| GB/T 3222.2-2022 |
Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels 声学 环境噪声的描述、测量与评价 第2部分：声压级测定 |
China National Standards measurement,and |
English PDF |
| GB/T 3222.1-2022 |
Acoustics—Description, measurement and assessment of environmental noise—Part 1: Basic quantities and assessment procedures 声学 环境噪声的描述、测量与评价 第1部分：基本参量与评价方法 |
China National Standards measurement,and |
English PDF |
| GB/T 19889.2-2022 |
Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2 : Determination and application of measurement uncertainties 声学 建筑和建筑构件隔声测量 第2部分：测量不确定度评定和应用 |
China National Standards measurement,and |
English PDF |
| GB/T 8446.2-2022 |
Heat sinks for power semiconductor devices—Part 2: Measurement methods of thermal resistance and inlet-outlet fluid pressure drop 电力半导体器件用散热器 第2部分：热阻和流阻测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 41311.1-2022 |
Acoustics - Describe the quantity of underwater noise from ships and methods of measurement - Part 1: Requirements for precision measurements in deep water for comparison purposes {译} 声学 描述船舶水下噪声的量及其测量方法 第1部分：用于比对目的的深水精密测量要求 |
China National Standards measurement,and |
English PDF |
| GB/Z 17215.669-2022 |
Electrical measurement data exchange - DLMS/COSEM components - Part 69: Mapping between common information model message sets (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols {译} 电测量数据交换 DLMS/COSEM组件 第69部分：公共信息模型消息集（IEC 61968-9）与DLMS/COSEM（IEC 62056）数据模型和协议间的映射 |
China National Standards measurement,and |
English PDF |
| GB/T 6113.402-2022 |
Specifications for radio disturbance and immunity measuring equipment and methods of measurement - Part 4-2: Uncertainty, statistics and limit value modeling Uncertainties of measuring equipment and facilities {译} 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分：不确定度、统计学和限值建模 测量设备和设施的不确定度 |
China National Standards measurement,and |
English PDF |
| GB/T 42287-2022 |
High Voltage Test Techniques Electromagnetic and Acoustic Methods for Partial Discharge Measurements {译} 高电压试验技术 电磁和声学法测量局部放电 |
China National Standards measurement,and |
English PDF |
| GB/T 41914.2-2022 |
Microbubble technology General rules for the use and measurement of microbubbles Part 2: Classification of microbubble properties {译} 微细气泡技术 微细气泡使用和测量通则 第2部分：微细气泡属性分类 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.19-2022 |
Electromagnetic compatibility-Testing and measurement techniques-Part 19: 2kHz~150kHz differential mode conducted disturbance and communication signal immunity test of AC power port {译} 电磁兼容 试验和测量技术 第19部分：交流电源端口2kHz~150kHz差模传导骚扰和通信信号抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/T 42148-2022 |
Rail Transit Ground Devices DC Protection measurement and Control Devices {译} 轨道交通 地面装置 直流保护测控装置 |
China National Standards measurement,and |
English PDF |
| GB/T 42140-2022 |
Information technology; Cloud computing; Cloud operating system performance testing indicators and measurement methods {译} 信息技术 云计算 云操作系统性能测试指标和度量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 42257-2022 |
Chromium-erbium co-doped yttrium-scandium-gallium garnet crystal optical and laser performance measurement method {译} 铬铒共掺钇钪镓石榴石晶体光学及激光性能测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 9253-2022 |
Oil and Gas Industry Machining, measurement and Inspection of Casing, Tubing and Line Pipe Threads {译} 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards measurement,and |
English PDF |
| GB/T 28784.5-2022 |
Mechanical vibration - Measurement of vibration in ships - Part 5: Guidelines for the measurement, evaluation and reporting of vibration for the habitability of passenger and merchant ships {译} 机械振动 船舶振动测量 第5部分：客船和商船适居性振动测量、评价和报告准则 |
China National Standards measurement,and |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards measurement,and |
English PDF |
| GB/T 41914.1-2022 |
Fine bubble technology - General rules for the use and measurement of fine bubbles - Part 1: Terminology {译} 微细气泡技术 微细气泡使用和测量通则 第1部分：术语 |
China National Standards measurement,and |
English PDF |
| GB/T 42125.10-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric strength test equipment {译} 测量、控制和实验室用电气设备的安全要求 第10部分：绝缘电阻测量和介电强度试验设备的特殊要求 |
China National Standards measurement,and |
English PDF |
| GB/T 28827.7-2022 |
Information technology services - Operation and maintenance - Part 7: Specifications for cost measurement {译} 信息技术服务 运行维护 第7部分：成本度量规范 |
China National Standards measurement,and |
English PDF |
| GB/T 41640-2022 |
Critical current measurement Second-generation high-temperature superconducting long tape critical current and its uniformity along the length direction {译} 临界电流测量 第二代高温超导长带临界电流及其沿长度方向均匀性测量 |
China National Standards measurement,and |
English PDF |
| GB/T 41866.4-2022 |
Systems and software engineering—Information technology project performance benchmarking measurement framework—Part 4: Data collection and maintenance {译} 系统与软件工程 信息技术项目绩效基准度量框架 第4部分：数据收集和维护 |
China National Standards measurement,and |
English PDF |
| GB/T 18268.32-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第32部分：安全相关系统和预期执行安全相关功能（功能安全）设备的抗扰度要求 特定电磁环境的工业应用 |
China National Standards measurement,and |
English PDF |
| GB/T 18268.31-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第31部分：安全相关系统和预期执行安全相关功能（功能安全）设备的抗扰度要求 一般工业应用 |
China National Standards measurement,and |
English PDF |
| GB/T 3656-2022 |
Throwing measurement method of coercive force of electromagnetic pure iron and soft magnetic alloy {译} 电磁纯铁及软磁合金矫顽力的抛移测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 8190.6-2022 |
Reciprocating internal combustion engines - Emission measurements - Part 6: Measurement results and test reports {译} 往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
China National Standards measurement,and |
English PDF |
| GB 14023-2022 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers {译} 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 18779.1-2022 |
Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1: Rules for Passing or Failing Verification According to Specifications {译} 产品几何技术规范(GPS) 工件与测量设备的测量检验 第1部分：按规范验证合格或不合格的判定规则 |
China National Standards measurement,and |
English PDF |
| GB/T 41971-2022 |
Agriculture and Forestry Tractor Dynamic Noise Measurement {译} 农林拖拉机 动态噪声测量 |
China National Standards measurement,and |
English PDF |
| GB/T 41850.8-2022 |
Mechanical vibration - measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems {译} 机械振动 机器振动的测量和评价 第8部分:往复式压缩机系统 |
China National Standards measurement,and |
English PDF |
| GB/T 40523.1-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 1: General principles 船舶与海上技术 船体和螺旋桨性能变化测量 第1部分：总则 |
China National Standards measurement,and |
English PDF |
| GB/T 40523.3-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 3: Alternative methods 船舶与海上技术 船体和螺旋桨性能变化测量 第3部分：替代方法 |
China National Standards measurement,and |
English PDF |
| GB/T 40523.2-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 2: Default method 船舶与海上技术 船体和螺旋桨性能变化测量 第2部分：默认方法 |
China National Standards measurement,and |
English PDF |
| GB/T 40299-2021 |
Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing 金属和合金的腐蚀 腐蚀试验电化学测量方法适用惯例 |
China National Standards measurement,and |
English PDF |
| GB/T 40296-2021 |
Practical superconducting wires—Twist pitch measurement method of Nb-Ti and Nb3Sn composite superconductors 实用超导线 铌-钛（Nb-Ti）与铌三锡（Nb3Sn）复合超导体的扭距测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 33521.32-2021 |
Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分：大地的动态性能测量 |
China National Standards measurement,and |
English PDF |
| GB/T 20728-2021 |
Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters 封闭管道中流体流量的测量 科里奥利流量计的选型、安装和使用指南 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.31-2021 |
Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength 光纤试验方法规范 第31部分：机械性能的测量方法和试验程序 抗张强度 |
China National Standards measurement,and |
English PDF |
| GB/T 18703-2021 |
Mechanical vibration and shock—Hand-arm vibration—measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 机械振动与冲击 手传振动 手套掌部振动传递率的测量与评价 |
China National Standards measurement,and |
English PDF |
| GB/T 40277-2021 |
Paper,board and pulps—Measurement of diffuse blue reflectance factor(ISO brightness)—Indoor daylight conditions 纸、纸板和纸浆 蓝光漫反射因数（ISO亮度）的测定 室内日光条件 |
China National Standards measurement,and |
English PDF |
| GB/T 40095-2021 |
Technical specifications for measurement and control device in smart substation 智能变电站测控装置技术规范 |
China National Standards measurement,and |
English PDF |
| GB/T 31838.7-2021 |
Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率 |
China National Standards measurement,and |
English PDF |
| GB/T 17934.1-2021 |
Graphic technology-Process control for the production of half-tone colour separations，proof and production prints-Part 1:Parameters and measurement methods 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第1部分：参数与测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.47-2021 |
Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss 光纤试验方法规范 第47部分：传输特性的测量方法和试验程序 宏弯损耗 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.42-2021 |
Specifications for optical fibre test methods—Part 42:Measurement methods and test procedures for transmission characteristics—Chromatic dispersion 光纤试验方法规范 第42部分：传输特性的测量方法和试验程序 波长色散 |
China National Standards measurement,and |
English PDF |
| GB/T 25000.20-2021 |
Systems and software engineering -- Systems and software quality requirements and evaluation (SQuaRE) -- Part 20: Quality measurement framework 系统与软件工程 系统与软件质量要求和评价（SQuaRE） 第 20 部分：质量测量框架 |
China National Standards measurement,and |
English PDF |
| GB/T 19346.3-2021 |
Methods of measurement of amorphous and nanocrystalline alloys-Part 3:AC magnetic properties of Fe-based amorphous strip using a single sheet specimen 非晶纳米晶合金测试方法 第3部分：铁基非晶单片试样交流磁性能 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.54-2021 |
Specifications for optical fibre test methods—Part 54:Measurement methods and test procedures for environmental characteristics—Gamma irradiation 光纤试验方法规范 第54部分：环境性能的测量方法和试验程序 伽玛辐照 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.45-2021 |
Specifications for optical fibre test methods—Part 45:Measurement methods and test procedures for transmission characteristics—Mode field diameter 光纤试验方法规范 第45部分：传输特性的测量方法和试验程序 模场直径 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.43-2021 |
Specifications for optical fibre test methods—Part 43: Measurement methods and test procedures for transmission characteristics—Numerical aperture 光纤试验方法规范 第43部分：传输特性的测量方法和试验程序 数值孔径 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.41-2021 |
Specifications for optical fibre test methods-Part 41:Measurement methods and test procedures for transmission characteristics-Bandwidth 光纤试验方法规范 第41部分：传输特性的测量方法和试验程序 带宽 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.34-2021 |
Specifications for optical fibre test methods—Part 34:Measurement methods and test procedures for mechanical characteristics—Fibre curl 光纤试验方法规范 第34部分：机械性能的测量方法和试验程序 光纤翘曲 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.30-2021 |
Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.20-2021 |
Specifications for optical fibre test methods-Part 20:Measurement methods and test procedures for dimensions- Fibre geometry 光纤试验方法规范 第20部分：尺寸参数的测量方法和试验程序 光纤几何参数 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.10-2021 |
Specifications for optical fibre test methods-Part 10:Measurement methods and test procedures-General and guidance 光纤试验方法规范 第10部分：测量方法和试验程序 总则 |
China National Standards measurement,and |
English PDF |
| GB/T 17651.2-2021 |
Measurement of smoke density of cables or optical fiber cables burning under defined conditions - Part 2: Test procedure and requirements 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分：试验程序和要求 |
China National Standards measurement,and |
English PDF |
| GB/T 17650.2-2021 |
Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity 取自电缆或光缆的材料燃烧时释出气体的试验方法 第2部分：酸度（用pH测量）和电导率的测定 |
China National Standards measurement,and |
English PDF |
| GB/T 19702-2021 |
In vitro diagnostic medical devices -- Measurement of quantities in samples of biological origin -- Requirements for content and presentation of reference measurement procedures 体外诊断医疗器械 生物源性样品中量的测量 参考测量程序的表述和内容的要求 |
China National Standards measurement,and |
English PDF |
| GB/T 3488.3-2021 |
Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals 硬质合金 显微组织的金相测定 第3部分：Ti（C,N）和WC立方碳化物基硬质合金显微组织的金相测定 |
China National Standards measurement,and |
English PDF |
| GB/T 39853.2-2021 |
Power quality measurement in power supply systems—Part 2: Functional tests and uncertainty requirements 供电系统中的电能质量测量 第2部分：功能试验和不确定度要求 |
China National Standards measurement,and |
English PDF |
| GB/T 39843-2021 |
Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films 电子学特性测量 大面积超导膜的局域临界电流密度及其分布 |
China National Standards measurement,and |
English PDF |
| GB/T 39777-2021 |
Technical requirements of measurement and verification of energy savings—Industrial boiler system 节能量测量和验证技术要求 工业锅炉系统 |
China National Standards measurement,and |
English PDF |
| GB/T 20833.4-2021 |
Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index 旋转电机 绕组绝缘 第4部分：绝缘电阻和极化指数测量 |
China National Standards measurement,and |
English PDF |
| GB/T 7308.2-2021 |
Plain bearings—Thin-walled half bearings with or without flange—Part 2:Measurement of wall thickness and flange thickness 滑动轴承 有法兰或无法兰薄壁轴瓦 第2部分:轴瓦壁厚和法兰厚度测量 |
China National Standards measurement,and |
English PDF |
| GB/T 17743-2021 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰特性的限值和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 6113.104-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分：无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards measurement,and |
English PDF |
| GB/T 14598.118-2021 |
Measuring relays and protection equipment -- Part 118: Synchrophasor for power systems -- Measurements 量度继电器和保护装置 第118部分：电力系统同步相量 测量 |
China National Standards measurement,and |
English PDF |
| GB/T 41105.3-2021 |
Non-destructive testing -- measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method 无损检测? X射线管电压的测量和评价 第3部分：能谱法 |
China National Standards measurement,and |
English PDF |
| GB/T 41105.2-2021 |
Non-destructive testing -- measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method 无损检测? X射线管电压的测量和评价 第2部分：厚板滤波法稳定性核查 |
China National Standards measurement,and |
English PDF |
| GB/T 41105.1-2021 |
Non-destructive testing—measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method 无损检测 X射线管电压的测量和评价 第1部分：分压法 |
China National Standards measurement,and |
English PDF |
| GB/T 29004-2021 |
Rice transplanter -- Evaluation index and measurement methods for fuel consumption 水稻插秧机 燃油消耗量指标及测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 10762-2021 |
Method of mass measurements for industrial and mining electric locomotive 工矿电机车质量测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 20076-2021 |
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 17626.31-2021 |
Electromagnetic compatibility—Testing and measurement techniques—Part 31：AC mains ports broadband conducted disturbance immunity test 电磁兼容 试验和测量技术 第31部分：交流电源端口宽带传导骚扰抗扰度试验 |
China National Standards measurement,and |
English PDF |
| GB/T 7777-2021 |
measurement and evaluation of mechanical vibration of displacement compressors 容积式压缩机机械振动测量与评价 |
China National Standards measurement,and |
English PDF |
| GB/T 15040-2021 |
Working standard lamps for the measurement of luminous flux 工作测光标准灯泡 |
China National Standards measurement,and |
English PDF |
| GB/T 21021.4-2021 |
Intermodulation level measurement for passive RF and microwave devices -- Part 4: Measurement of passive intermodulation in coaxial cables 无源射频和微波元器件的互调电平测量 第4部分：同轴电缆的无源互调测量 |
China National Standards measurement,and |
English PDF |
| GB/T 21021.3-2021 |
Intermodulation level measurement for passive RF and microwave devices -- Part 3: Measurement of passive intermodulation in coaxial connectors 无源射频和微波元器件的互调电平测量 第3部分：同轴连接器的无源互调测量 |
China National Standards measurement,and |
English PDF |
| GB/T 21021.2-2021 |
Intermodulation level measurement for passive RF and microwave devices -- Part 2: Measurement of passive intermodulation in coaxial cable assemblies 无源射频和微波元器件的互调电平测量 第2部分：同轴电缆组件的无源互调测量 |
China National Standards measurement,and |
English PDF |
| GB/T 21021.1-2021 |
Intermodulation level measurement for passive RF and microwave devices—Part 1: General requirements and measuring methods 无源射频和微波元器件的互调电平测量 第1部分：一般要求和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 40602.1-2021 |
Antennas and reception systems for radio interference—Part 1: Basic measurement—Method for far field measuring in microwave anechoic chamber 天线及接收系统的无线电干扰 第1部分：基础测量 天线方向图的室内远场测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 40602.2-2021 |
Antennas and reception systems for radio interference—Part 2:Basic measurement—Method for near field measuring high gain antenna pattern in microwave anechoic chamber 天线及接收系统的无线电干扰 第2部分：基础测量 高增益天线方向图室内平面近场测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 40593-2021 |
Guidelines for parameters measurement and modeling of synchronous generator governing system 同步发电机调速系统参数实测及建模导则 |
China National Standards measurement,and |
English PDF |
| GB/T 6683.1-2021 |
Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test 石油及相关产品 测量方法与结果精密度 第1部分：试验方法精密度数据的确定 |
China National Standards measurement,and |
English PDF |
| GB/T 40810.2-2021 |
Geometrical product specifications (GPS)—Online measurement in process—Part 2：Online verifications of geometric features（form and position） 产品几何技术规范（GPS） 生产过程在线测量 第2部分：几何特征（形位）的在线检测与验证 |
China National Standards measurement,and |
English PDF |
| GB/T 40810.1-2021 |
Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture) 产品几何技术规范（GPS） 生产过程在线测量 第1部分：几何特征（尺寸、表面结构）的在线检测与验证 |
China National Standards measurement,and |
English PDF |
| GB/T 40742.1-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 1:Basic concept and measurement—Symbol,terminology,measuring conditions and procedures 产品几何技术规范（GPS） 几何精度的检测与验证 第1部分：基本概念和测量基础 符号、术语、测量条件和程序 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.49-2021 |
Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission characteristics—Differential mode delay 光纤试验方法规范 第49部分：传输特性的测量方法和试验程序 微分模时延 |
China National Standards measurement,and |
English PDF |
| GB/T 15972.32-2021 |
Specifications for optical fibre test methods—Part 32： Measurement methods and test procedures for mechanical characteristics—Coating strippability 光纤试验方法规范 第32部分：机械性能的测量方法和试验程序 涂覆层可剥性 |
China National Standards measurement,and |
English PDF |
| GB/T 39532-2020 |
Guidance for measurement and verification of energy performance 能源绩效测量和验证指南 |
China National Standards measurement,and |
English PDF |
| GB/T 24474.2-2020 |
Measurement of ride quality—Part 2: Escalators and moving walks 乘运质量测量 第2部分：自动扶梯和自动人行道 |
China National Standards measurement,and |
English PDF |
| GB/T 20818.12-2020 |
Industrial-process measurement and control—Data structures and elements in process equipment catalogues—Part 12：Lists of properties (LOPs) for flow measuring equipment for electronic data exchange 工业过程测量和控制 过程设备目录中的数据结构和元素 第12部分：流量测量设备电子数据交换用属性列表（LOPs） |
China National Standards measurement,and |
English PDF |
| GB/T 20818.21-2020 |
Industrial-process measurement and control—Data structures and elements in process equipment catalogues—Part 21: List of properties (LOP) for automated valves for electronic data exchange—Generic structures 工业过程测量和控制 过程设备目录中的数据结构和元素 第21部分：自动阀电子数据交换用属性列表(LOP) 通用结构 |
China National Standards measurement,and |
English PDF |
| GB/T 24328.11-2020 |
Tissue paper and tissue products—Part 11: Determination of optical properties—Measurement of brightness and colour—C/2°(indoor daylight) illuminant 卫生纸及其制品 第11部分：光学性能的测定 亮度和颜色的测定 C/2°（室内日光条件） |
China National Standards measurement,and |
English PDF |
| GB/T 24328.8-2020 |
Tissue paper and tissue products—Part 8: Determination of optical properties—Measurement of brightness and colour—D65/10°（outdoor daylight conditions) 卫生纸及其制品 第8部分：光学性能的测定 亮度和颜色的测定 D65/10°（室外日光条件） |
China National Standards measurement,and |
English PDF |
| GB/T 38852.1-2020 |
Industrial-process measurement, control and automation—Evaluation of system properties for the purpose of system assessment—Part 1: Terminology and basic concepts 工业过程测量控制和自动化 系统评估中系统特性的评定 第1部分：术语和基本概念 |
China National Standards measurement,and |
English PDF |
| GB/T 38852.2-2020 |
Industrial-process measurement, control and automation—Evaluation of system properties for the purpose of system assessment—Part 2: Assessment methodology 工业过程测量控制和自动化 系统评估中系统特性的评定 第2部分：评估方法学 |
China National Standards measurement,and |
English PDF |
| GB/T 12967.1-2020 |
Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定 |
China National Standards measurement,and |
English PDF |
| GB/T 38889-2020 |
Antennas and reception systems for radio interference—Antenna measurement—Vehicle antennas and system 天线及接收系统的无线电干扰 天线测量 车载天线及系统 |
China National Standards measurement,and |
English PDF |
| GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 38777-2020 |
Technical requirements and methods of measurement for digital terrestrial television external receiving module 地面数字电视外接模块式接收终端技术要求和测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 28239-2020 |
Limits and measurement methods for non-road diesel engine specific fuel consumption 非道路用柴油机燃料消耗率限值及试验方法 |
China National Standards measurement,and |
English PDF |
| GB/T 38617-2020 |
Industrial-process measurement and control instruments terminology—Level measuring instruments terminology 工业自动化仪表术语 物位仪表术语 |
China National Standards measurement,and |
English PDF |
| GB/T 38677-2020 |
Gas analysis—Measurement procedure and result—Technical requirements for calibration 气体分析 测量过程及结果 校准技术要求 |
China National Standards measurement,and |
English PDF |
| GB/T 10068-2020 |
Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards measurement,and |
English PDF |
| GB/T 39643-2020 |
Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences 产品几何技术规范（GPS） 长度测量中温度影响引入的系统误差和测量不确定度来源 |
China National Standards measurement,and |
English PDF |
| GB/T 39640-2020 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure 家用电器及类似器具电磁场相对于人体曝露的测量方法 |
China National Standards measurement,and |
English PDF |
| GB/T 39635-2020 |
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test 金属材料 仪器化压入法测定压痕拉伸性能和残余应力 |
China National Standards measurement,and |
English PDF |
| GB/T 39627-2020 |
Technical specification of intelligent measurement and control devices for smart hydropower plant 智能水电厂智能测控装置技术规范 |
China National Standards measurement,and |
English PDF |
| GB/T 39585-2020 |
Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system 光电测量 配光测试系统的性能要求和检测方法 |
China National Standards measurement,and |
English PDF |
| GB/T 33523.71-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 71: Software measurement standards 产品几何技术规范（GPS） 表面结构 区域法 第71部分：软件测量标准 |
China National Standards measurement,and |
English PDF |
| GB/T 18779.6-2020 |
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces 产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则 |
China National Standards measurement,and |
English PDF |
| GB/T 18779.5-2020 |
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 |
China National Standards measurement,and |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
