Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44183-2024 |
Technical requirements and measurement methods for performance of mobile terminals supporting Beidou-space radio frequency performance {译} 支持北斗的移动终端性能技术要求及测量方法-空间射频性能 |
China National Standards method |
 English PDF |
| GB/T 44182-2024 |
Technical requirements and measurement methods for performance of mobile terminals supporting Beidou-electromagnetic compatibility performance {译} 支持北斗的移动终端性能技术要求及测量方法-电磁兼容性能 |
China National Standards method |
English PDF |
| GB/T 44165.6-2024 |
Detection methods for key chemical substances in consumer products-Part 6: Acrylamide {译} 消费品中重点化学物质检测方法-第6部分：丙烯酰胺 |
China National Standards method |
English PDF |
| GB/T 44165.5-2024 |
Detection methods for key chemical substances in consumer products-Part 5: Phenol {译} 消费品中重点化学物质检测方法-第5部分：苯酚 |
China National Standards method |
English PDF |
| GB/T 44165.4-2024 |
Detection methods for key chemical substances in consumer products-Part 4: 1,4-dichlorobenzene {译} 消费品中重点化学物质检测方法-第4部分：1,4-二氯苯 |
China National Standards method |
English PDF |
| GB/T 44165.3-2024 |
Detection methods for key chemical substances in consumer products-Part 3: Ethyl chloride {译} 消费品中重点化学物质检测方法-第3部分：氯代乙烷 |
China National Standards method |
English PDF |
| GB/T 44165.2-2024 |
Detection methods for key chemical substances in consumer products-Part 2: Styrene migration {译} 消费品中重点化学物质检测方法-第2部分：苯乙烯迁移量 |
China National Standards method |
English PDF |
| GB/T 44165.1-2024 |
Detection methods for key chemical substances in consumer products-Part 1: Short-chain chlorinated paraffins {译} 消费品中重点化学物质检测方法-第1部分：短链氯化石蜡 |
China National Standards method |
English PDF |
| GB/T 44156-2024 |
Performance requirements and test methods for rear traffic crossing warning system of passenger vehicles {译} 乘用车后方交通穿行提示系统性能要求及试验方法 |
China National Standards method |
English PDF |
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mechanical properties tests {译} 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards method |
English PDF |
| GB/T 44152-2024 |
Ultrasonic testing methods for seamless steel pipe ends {译} 无缝钢管管端超声检测方法 |
China National Standards method |
English PDF |
| GB/T 44149-2024 |
Fine ceramics-Determination of isoelectric point of ceramic powders-zeta potential method {译} 精细陶瓷-陶瓷粉体等电点的测定-zeta电位法 |
China National Standards method |
English PDF |
| GB/T 44147-2024 |
Performance test methods for liquid chromatography and atomic fluorescence spectrometry {译} 液相色谱与原子荧光光谱联用仪性能测试方法 |
China National Standards method |
English PDF |
| GB/T 44119-2024 |
Measurement method for antenna coefficient of radiated interference 1m method {译} 辐射骚扰1m法天线系数测量方法 |
China National Standards method |
English PDF |
| GB/Z 44070-2024 |
Hydraulic cylinders - Buckling load assessment methods {译} 液压缸-屈曲载荷评估方法 |
China National Standards method |
English PDF |
| GB/T 22459.9-2024 |
Refractory mud - Part 9: Test method for shear bond strength at room temperature {译} 耐火泥浆-第9部分：常温抗剪粘接强度试验方法 |
China National Standards method |
English PDF |
| GB/T 20290-2024 |
Household electric dishwashers - Performance test methods {译} 家用电动洗碗机-性能测试方法 |
China National Standards method |
English PDF |
| GB/T 18029.8-2024 |
Wheelchairs - Part 8: Requirements and test methods for static strength, impact strength and fatigue strength {译} 轮椅车-第8部分：静态强度、冲击强度及疲劳强度的要求和测试方法 |
China National Standards method |
English PDF |
| GB/T 17692-2024 |
Test methods for net power of automobile engines and drive motors {译} 汽车发动机及驱动电机净功率测试方法 |
China National Standards method |
English PDF |
| GB/T 7260.3-2024 |
Uninterruptible power supply systems (UPS) - Part 3: methods for determining performance and test requirements {译} 不间断电源系统（UPS）-第3部分：确定性能和试验要求的方法 |
China National Standards method |
English PDF |
| GB/T 6113.106-2024 |
Specifications for radio disturbance and immunity measuring equipment and measurement methods - Part 1-6: Radio disturbance and immunity measuring equipment - EMC antenna calibration {译} 无线电骚扰和抗扰度测量设备和测量方法规范-第1-6部分:无线电骚扰和抗扰度测量设备-EMC天线校准 |
China National Standards method |
English PDF |
| GB/T 5270-2024 |
Metallic coatings on metal substrates - Electrodeposited and chemically deposited layers - Review of adhesion strength test methods {译} 金属基体上的金属覆盖层-电沉积和化学沉积层-附着强度试验方法评述 |
China National Standards method |
English PDF |
| GB/T 5169.23-2024 |
Fire hazard tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame test method for polymer tubular materials {译} 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 |
China National Standards method |
English PDF |
| GB/Z 43996.1-2024 |
Fine bubble technology-Agricultural application-Part 1: Test method for evaluating the growth promotion effect of hydroponic lettuce {译} 微细气泡技术-农业应用-第1部分：评价水培生菜生长促进作用的测试方法 |
China National Standards method |
English PDF |
| GB/T 19055-2024 |
Automobile engine reliability test methods {译} 汽车发动机可靠性试验方法 |
China National Standards method |
English PDF |
| GB/T 44027.2-2024 |
Determination method of carbon materials - Part 2: Determination of expansion rate {译} 炭材料测定方法-第2部分：膨胀率的测定 |
China National Standards method |
English PDF |
| GB/T 13305-2024 |
Determination method of α-phase content in stainless steel {译} 不锈钢中α-相含量测定法 |
China National Standards method |
English PDF |
| GB/T 44037-2024 |
Test methods for coke dissolution rate and post-dissolution strength {译} 焦炭溶损率及溶损后强度试验方法 |
China National Standards method |
English PDF |
| GB/T 44077.41-2024 |
Transparent display devices - Part 41: Test methods - Optical properties {译} 透明显示器件-第41部分：测试方法-光学性能 |
China National Standards method |
English PDF |
| GB/T 44073-2024 |
Microwave darkroom site confirmation method {译} 微波暗室场地确认方法 |
China National Standards method |
English PDF |
| GB/T 32307-2024 |
Spacecraft magnetic evaluation and control methods {译} 航天器磁性评估和控制方法 |
China National Standards method |
English PDF |
| GB/T 43941.2-2024 |
Technical requirements and test methods for high-speed modems in satellite-to-ground data transmission-Part 2: Demodulator {译} 星地数据传输中高速调制解调器技术要求和测试方法-第2部分:解调器 |
China National Standards method |
English PDF |
| GB/T 13181-2024 |
Solid scintillator performance measurement method {译} 固体闪烁体性能测量方法 |
China National Standards method |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-Ultrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards method |
English PDF |
| GB/T 44053-2024 |
Hydraulic transmission-Test methods for water separation performance of oil purifiers {译} 液压传动-净油机水分离性能的试验方法 |
China National Standards method |
English PDF |
| GB/T 44035-2024 |
Image materials-Color photos-Evaluation methods for outdoor image stability {译} 影像材料-彩色照片-户外影像稳定性的评价方法 |
China National Standards method |
English PDF |
| GB/T 44049-2024 |
Construction machinery-test and calculation methods for basic data of operating energy consumption {译} 工程机械-运行能耗基础数据测试与计算方法 |
China National Standards method |
English PDF |
| GB/T 44088-2024 |
Technical requirements and test methods for the measurement module of the Beidou satellite navigation system {译} 北斗卫星导航系统测量型模块技术要求及测试方法 |
China National Standards method |
English PDF |
| GB/T 44087-2024 |
Technical requirements and test methods for BeiDou-3 regional short message communication user terminals {译} 北斗三号区域短报文通信用户终端技术要求与测试方法 |
China National Standards method |
English PDF |
| GB/Z 44048-2024 |
Wind power generation system-numerical field calibration method for power performance test of wind turbines {译} 风能发电系统-风力发电机组功率性能测试的数值场标定方法 |
China National Standards method |
English PDF |
| GB/T 44125.2-2024 |
Railway applications - Braking performance calculation (parking, deceleration and static braking) Part 2: Step-by-step calculation method {译} 铁路应用-制动性能计算（停车、减速和静态制动）第2部分：分步计算法 |
China National Standards method |
English PDF |
| GB/T 44125.1-2024 |
Railway applications - Braking performance calculation (parking, deceleration and static braking) Part 1: Average calculation method {译} 铁路应用-制动性能计算（停车、减速和静态制动）第1部分：平均计算法 |
China National Standards method |
English PDF |
| GB/T 44031-2024 |
Manganese ore - Chemical analysis methods - General {译} 锰矿石-化学分析方法-通则 |
China National Standards method |
English PDF |
| GB/T 10322.3-2024 |
Iron ore - Experimental method for checking sampling precision {译} 铁矿石-校核取样精密度的实验方法 |
China National Standards method |
English PDF |
| GB/T 44034-2024 |
Iron ore - Sampling method of ore pulp {译} 铁矿石-矿浆的取样方法 |
China National Standards method |
English PDF |
| GB/T 18297-2024 |
Automobile engine performance test methods {译} 汽车发动机性能试验方法 |
China National Standards method |
English PDF |
| GB/Z 44116-2024 |
Durability test methods for fuel cell engines and key components {译} 燃料电池发动机及关键部件耐久性试验方法 |
China National Standards method |
English PDF |
| GB/T 44083.4-2024 |
Road vehicles - methods and rules for evaluating the usability of child restraint systems and their installation in vehicle fixing systems - Part 4: Booster seats and booster cushions {译} 道路车辆-儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则-第4部分：增高椅和增高垫 |
China National Standards method |
English PDF |
| GB/T 44083.3-2024 |
Road vehicles - methods and rules for evaluating the usability of child restraint systems and their installation in vehicle fixing systems - Part 3: Riding and daily maintenance of child occupants in child restraint systems {译} 道路车辆-儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则-第3部分：儿童约束系统中儿童乘员的搭乘及日常维护 |
China National Standards method |
English PDF |
| GB/T 44083.2-2024 |
Road vehicles - methods and rules for evaluating the usability of child restraint systems and their installation in vehicle fixing systems - Part 2: Child restraint systems fixed with vehicle seat belts {译} 道路车辆-儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则-第2部分：用车辆安全带固定儿童约束系统 |
China National Standards method |
English PDF |
| GB/T 44042-2024 |
method for measuring underwater radiated noise of ships {译} 船舶水下辐射噪声测量方法 |
China National Standards method |
English PDF |
| GB/T 7939.2-2024 |
Hydraulic transmission connection - Test method - Part 2: Quick-change connector {译} 液压传动连接-试验方法-第2部分：快换接头 |
China National Standards method |
English PDF |
| GB/T 44067.1-2024 |
Industrial Internet platform - Technical requirements and test methods - Part 1: General {译} 工业互联网平台-技术要求及测试方法-第1部分：总则 |
China National Standards method |
English PDF |
| GB/T 44067.2-2024 |
Industrial Internet platform - Technical requirements and test methods - Part 2: Industrial PaaS platform {译} 工业互联网平台-技术要求及测试方法-第2部分：工业PaaS平台 |
China National Standards method |
English PDF |
| GB/T 44067.3-2024 |
Industrial Internet platform - Technical requirements and test methods - Part 3: Industrial DaaS platform {译} 工业互联网平台-技术要求及测试方法-第3部分：工业DaaS平台 |
China National Standards method |
English PDF |
| GB/T 44027.1-2024 |
Carbon material determination methods - Part 1: Determination of first discharge specific capacity, first coulomb efficiency, and retention rate of discharge capacity at different rates {译} 炭材料测定方法-第1部分：首次放电比容量、首次库仑效率、不同倍率放电容量保持率的测定 |
China National Standards method |
English PDF |
| GB/T 41666.7-2024 |
Plastic pipe systems for trenchless repair of underground non-pressure drainage networks - Part 7: Spiral winding lining method {译} 地下无压排水管网非开挖修复用塑料管道系统-第7部分：螺旋缠绕内衬法 |
China National Standards method |
English PDF |
| GB/T 44128-2024 |
Road vehicles - Braking start pressure of pneumatic brake systems of heavy commercial trains - Roller brake test bench measurement method {译} 道路车辆-重型商用列车气压制动系统制动开始压力-滚筒制动试验台测量方法 |
China National Standards method |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards method |
English PDF |
| GB/T 44084-2024 |
Heavy commercial vehicle steering center area swing test and transition test method {译} 重型商用车转向中心区摇摆试验和过渡试验方法 |
China National Standards method |
English PDF |
| GB/T 44043-2024 |
Passenger cars - Free steering characteristics - Steering release open-loop test method {译} 乘用车-自由转向特性-转向释放开环试验方法 |
China National Standards method |
English PDF |
| GB/T 44032-2024 |
Identification methods for iron ore and iron-containing materials {译} 铁矿石与含铁物料的鉴别方法 |
China National Standards method |
English PDF |
| GB/T 44030-2024 |
Metallic materials-High temperature compression test methods {译} 金属材料-高温压缩试验方法 |
China National Standards method |
English PDF |
| GB/T 44040-2024 |
Measurement methods for external noise of heavy-duty vehicles in multi-operating conditions {译} 重型汽车多工况行驶车外噪声测量方法 |
China National Standards method |
English PDF |
| GB/T 19514-2024 |
Measurement methods for the volume of luggage compartments of passenger cars {译} 乘用车行李舱容积的测量方法 |
China National Standards method |
English PDF |
| GB/T 12674-2024 |
Measurement methods for mass parameters of automobiles, trailers and automobile trains {译} 汽车、挂车及汽车列车质量参数测量方法 |
China National Standards method |
English PDF |
| GB/T 44076-2024 |
Nanotechnology-Test methods for electrical properties of carbon nanotubes {译} 纳米技术-碳纳米管电学特性测试方法 |
China National Standards method |
English PDF |
| GB/T 3654.10-2024 |
Determination of ferroniobium-aluminum content-EDTA titration method {译} 铌铁-铝含量的测定-EDTA滴定法 |
China National Standards method |
English PDF |
| GB/T 34877.4-2024 |
Industrial fans-Determination of sound power level of fans under standard laboratory conditions-Part 4: Sound intensity method {译} 工业风机-标准实验室条件下风机声功率级的测定-第4部分：声强法 |
China National Standards method |
English PDF |
| GB/T 2039-2024 |
Metallic materials-Uniaxial tensile creep test method {译} 金属材料-单轴拉伸蠕变试验方法 |
China National Standards method |
English PDF |
| GB/T 44038-2024 |
Vehicle reversing warning sound requirements and test methods {译} 车辆倒车提示音要求及试验方法 |
China National Standards method |
English PDF |
| GB/T 18449.1-2024 |
Metallic materials-Knoop hardness test-Part 1:-Test method {译} 金属材料-努氏硬度试验-第1部分:-试验方法 |
China National Standards method |
English PDF |
| GB/T 4340.1-2024 |
Metallic materials-Vickers hardness test-Part 1:-Test method {译} 金属材料-维氏硬度试验-第1部分:-试验方法 |
China National Standards method |
English PDF |
| GB/T 44075-2024 |
Nanotechnology-surface enhanced Raman solid-phase substrate uniformity measurement-Raman imaging analysis method {译} 纳米技术-表面增强拉曼固相基片均匀性测量-拉曼成像分析法 |
China National Standards method |
English PDF |
| GB/T 3653.1-2024 |
Determination of boron iron-boron content-alkali titration method- {译} 硼铁-硼含量的测定-碱量滴定法- |
China National Standards method |
English PDF |
| GB/T 44033-2024 |
Calculation methods for utilization of iron ore tailings {译} 铁矿尾矿利用率计算方法 |
China National Standards method |
English PDF |
| GB/T 44028-2024 |
Calculation methods for utilization of iron ore waste rock {译} 铁矿废石利用率计算方法 |
China National Standards method |
English PDF |
| GB/T 44123-2024 |
Test methods for automobile hydraulic brake systems {译} 汽车液压制动系统试验方法 |
China National Standards method |
English PDF |
| GB/T 18802.331-2024 |
Low voltage surge protector components - Part 331: Performance requirements and test methods for metal oxide varistors (MOVs) {译} 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 |
China National Standards method |
English PDF |
| GB/T 609-2018 |
Chemical reagents - General method for determination of total nitrogen {译} 化学试剂-总氮量测定通用方法 |
China National Standards method |
English PDF |
| GB/Z 43996.2-2024 |
Microbubble technology - Agricultural applications - Part 2: Test method for evaluating the germination promotion effect on barley seeds {译} 微细气泡技术-农业应用-第2部分：评价大麦种子发芽促进作用的测试方法 |
China National Standards method |
English PDF |
| GB/Z 43998-2024 |
Nanotechnology - methods for measuring the concentration of nanoscale carbon black and amorphous silica in the air of mixed dust manufacturing environments {译} 纳米技术-混合粉尘制造环境空气中纳米级炭黑和无定形二氧化硅浓度的测量方法 |
China National Standards method |
English PDF |
| GB/Z 44002-2024 |
Space environment - methods for determining solar energy proton injection and peak flux {译} 空间环境-太阳能量质子注量和峰值通量的确定方法 |
China National Standards method |
English PDF |
| GB/Z 44005.1-2024 |
Nanotechnology - Clay nanomaterials - Part 1: Properties and measurement methods of layered clays {译} 纳米技术-黏土纳米材料-第1部分：层状黏土的特性及测量方法 |
China National Standards method |
English PDF |
| GB/T 11066.12-2024 |
methods for chemical analysis of gold - Part 12: - Determination of silver, copper, iron, lead, bismuth, antimony, magnesium, nickel, manganese, palladium, chromium, platinum, rhodium, titanium, zinc, arsenic, tin, silicon, cobalt, calcium, potassium, lithium, sodium, tellurium, vanadium, zirconium, cadmium, molybdenum, rhenium, and aluminum content - Inductively coupled plasma atomic emission spectrometry {译} 金化学分析方法-第12-部分：-银、铜、铁、铅、铋、锑、镁、镍、锰、钯、铬、铂、铑、钛、锌、砷、锡、硅、钴、钙、钾、锂、钠、碲、钒、锆、镉、钼、铼、铝含量的测定-电感耦合等离子体原子发射光谱法 |
China National Standards method |
English PDF |
| GB/T 11420-2024 |
Enamel products and porcelain glazes - Gloss test method {译} 搪瓷制品和瓷釉-光泽度测试方法 |
China National Standards method |
English PDF |
| GB/T 12690.12-2024 |
Non-rare earth impurities in rare earth metals and their oxides - Chemical analysis methods - Part 12: Determination of thorium and uranium content - Inductively coupled plasma mass spectrometry {译} 稀土金属及其氧化物中非稀土杂质-化学分析方法-第12部分：钍、铀量的测定-电感耦合等离子体质谱法 |
China National Standards method |
English PDF |
| GB/T 12705.2-2024 |
Textiles - Test method for anti-drilling down - Part 2: Box transfer method {译} 纺织品-防钻绒性试验方法-第2部分：转箱法 |
China National Standards method |
English PDF |
| GB/T 12959-2024 |
method for determination of heat of hydration of cement {译} 水泥水化热测定方法 |
China National Standards method |
English PDF |
| GB/T 1361-2024 |
General principles and general provisions for iron ore analysis methods {译} 铁矿石分析方法总则及一般规定 |
China National Standards method |
English PDF |
| GB/T 13748.20-2024 |
Chemical analysis methods for magnesium and magnesium alloys-Part 20: Determination of element content-Inductively coupled plasma atomic emission spectrometry {译} 镁及镁合金化学分析方法-第20部分：元素含量的测定-电感耦合等离子体原子发射光谱法 |
China National Standards method |
English PDF |
| GB/T 13929-2024 |
Water ring vacuum pumps and water ring compressors-Test methods {译} 水环真空泵和水环压缩机-试验方法 |
China National Standards method |
English PDF |
| GB/T 13930-2024 |
Water ring vacuum pumps and water ring compressors-methods for determination of gas volume {译} 水环真空泵和水环压缩机-气量测定方法 |
China National Standards method |
English PDF |
| GB/T 14207-2024 |
Test method for water absorption of sandwich structures or cores {译} 夹层结构或芯子吸水性试验方法 |
China National Standards method |
English PDF |
| GB/T 16477.1-2024 |
Chemical analysis methods for rare earth ferrosilicon alloys and magnesium ferrosilicon alloys-Part 1: Determination of total rare earth content and fifteen rare earth elements {译} 稀土硅铁合金及镁硅铁合金化学分析方法-第1部分：稀土总量、十五个稀土元素含量的测定 |
China National Standards method |
English PDF |
| GB/T 16659-2024 |
Determination method of mercury in coal {译} 煤中汞的测定方法 |
China National Standards method |
English PDF |
| GB/T 17737.119-2024 |
Coaxial communication cables - Part 1-119: Electrical test methods - Radio frequency power of coaxial cables and cable assemblies {译} 同轴通信电缆-第1-119部分：电气试验方法-同轴电缆及电缆组件的射频功率 |
China National Standards method |
English PDF |
| GB/T 18336.4-2024 |
Network security technology - Information technology security assessment criteria - Part 4: Normative framework for assessment methods and activities {译} 网络安全技术-信息技术安全评估准则-第4部分：评估方法和活动的规范框架 |
China National Standards method |
English PDF |
| GB/T 18910.63-2024 |
Liquid crystal display devices - Part 6-3: Test methods for liquid crystal display modules - Active matrix liquid crystal display =Motion artifacts of display modules {译} 液晶显示器件-第6-3部分：液晶显示模块测试方法-有源矩阵液晶显示模块运动伪像 |
China National Standards method |
English PDF |
| GB/T 19960-2024 |
Wind power generation system - General technical conditions and test methods for wind turbines {译} 风能发电系统-风力发电机组通用技术条件和试验方法 |
China National Standards method |
English PDF |
| GB/T 20183.1-2024 |
Plant protection machinery - Spraying equipment - Part 1: Test method for sprayer nozzles {译} 植物保护机械-喷雾设备-第1部分：喷雾机喷头试验方法 |
China National Standards method |
English PDF |
| GB/T 20183.2-2024 |
Plant protection machinery - Spraying equipment - Part 2: Test method for evaluating the horizontal lateral distribution of hydraulic sprayers {译} 植物保护机械-喷雾设备-第2部分：评价液力喷雾机水平横向分布的试验方法 |
China National Standards method |
English PDF |
| GB/T 20183.3-2024 |
Plant protection machinery - Spraying equipment - Part 3: Test method for evaluating the performance of the liquid dosage adjustment system per unit area {译} 植物保护机械-喷雾设备-第3部分：评价单位面积施药液量调节系统性能的试验方法 |
China National Standards method |
English PDF |
| GB/T 20340.1-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 1: Design safety, test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第1部分：设计安全、试验方法和验收条件 |
China National Standards method |
English PDF |
| GB/T 20340.2-2024 |
Agricultural trailers and towed equipment - Drawbar jacks - Part 2: Application safety, test methods and acceptance conditions {译} 农用挂车和被牵引设备-牵引杆千斤顶-第2部分：应用安全、试验方法和验收条件 |
China National Standards method |
English PDF |
| GB/T 20871.61-2024 |
Organic light-emitting diode display devices - Part 6-1: Test methods for optical and optoelectronic parameters {译} 有机发光二极管显示器件-第6-1部分：光学和光电参数测试方法 |
China National Standards method |
English PDF |
| GB/T 223.60-2024 |
Steel and alloys - Determination of silicon content - Gravimetric method {译} 钢铁及合金-硅含量的测定-重量法 |
China National Standards method |
English PDF |
| GB/T 23561.11-2024 |
methods for determination of physical and mechanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock {译} 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法 |
China National Standards method |
English PDF |
| GB/T 23561.1-2024 |
methods for determination of physical and mechanical properties of coal and rock - Part 1: General provisions for sampling {译} 煤和岩石物理力学性质测定方法-第1部分：采样一般规定 |
China National Standards method |
English PDF |
| GB/T 28629-2024 |
Chemical analysis methods for free silicon dioxide in cement clinker {译} 水泥熟料中游离二氧化硅化学分析方法 |
China National Standards method |
English PDF |
| GB/T 2910.11-2024 |
Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibers with certain other fibers (sulfuric acid method) {译} 纺织品-定量化学分析-第11部分：某些纤维素纤维与某些其他纤维的混合物（硫酸法） |
China National Standards method |
English PDF |
| GB/T 30177.2-2024 |
Filter performance test method-Part 2 Part: Vacuum filter {译} 过滤机性能测试方法-第2部分：真空过滤机 |
China National Standards method |
English PDF |
| GB/T 30270-2024 |
Network security technology-Information technology security assessment method {译} 网络安全技术-信息技术安全评估方法 |
China National Standards method |
English PDF |
| GB/T 31211.2-2024 |
Non-destructive testing-ultrasonic guided wave testing-Part 2: Magnetostriction method {译} 无损检测-超声导波检测-第2部分：磁致伸缩法 |
China National Standards method |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: Ultrasonic testing by time-of-flight diffraction {译} 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards method |
English PDF |
| GB/T 38001.51-2024 |
Flexible display devices - Part 5-1: Optical performance test method {译} 柔性显示器件-第5-1部分：光学性能测试方法 |
China National Standards method |
English PDF |
| GB/T 38001.52-2024 |
Flexible display devices - Part 5-2: Optical performance test method for non-portable curved display devices {译} 柔性显示器件-第5-2部分：非便携式曲面显示器件光学性能测试方法 |
China National Standards method |
English PDF |
| GB/T 38001.53-2024 |
Flexible display devices - Part 5-3: Visual evaluation method {译} 柔性显示器件-第5-3部分：目视评价方法 |
China National Standards method |
English PDF |
| GB/T 40344.3-2024 |
Vacuum technology - Standard methods for measuring the performance of vacuum pumps - Part 3: Specific parameters for mechanical booster pumps {译} 真空技术-真空泵性能测量标准方法-第3部分：机械增压泵的特定参数 |
China National Standards method |
English PDF |
| GB/T 4074.1-2024 |
Test methods for winding wires - Part 1: General provisions {译} 绕组线试验方法-第1部分：一般规定 |
China National Standards method |
English PDF |
| GB/T 4074.2-2024 |
Test methods for winding wires - Part 2: Dimensional measurements {译} 绕组线试验方法-第2部分：尺寸测量 |
China National Standards method |
English PDF |
| GB/T 4074.3-2024 |
Test methods for winding wires - Part 3: Mechanical properties {译} 绕组线试验方法-第3部分：机械性能 |
China National Standards method |
English PDF |
| GB/T 4074.4-2024 |
Test methods for winding wires - Part 4: Chemical properties {译} 绕组线试验方法-第4部分：化学性能 |
China National Standards method |
English PDF |
| GB/T 4074.5-2024 |
Test methods for winding wires - Part 5: Electrical properties {译} 绕组线试验方法-第5部分：电性能 |
China National Standards method |
English PDF |
| GB/T 4074.6-2024 |
Test methods for winding wires - Part 6: Thermal properties {译} 绕组线试验方法-第6部分：热性能 |
China National Standards method |
English PDF |
| GB/T 4103.18-2024 |
methods for chemical analysis of lead and lead alloys - Part 18: Determination of silver, copper, bismuth, arsenic, antimony, tin, zinc, iron, cadmium, nickel, magnesium, aluminum, calcium, selenium and tellurium content - Inductively coupled plasma mass spectrometry {译} 铅及铅合金化学分析方法-第18部分：银、铜、铋、砷、锑、锡、锌、铁、镉、镍、镁、铝、钙、硒和碲含量的测定-电感耦合等离子体质谱法 |
China National Standards method |
English PDF |
| GB/T 42513.6-2024 |
Chemical analysis methods for nickel alloys-Part 6: Determination of molybdenum content-Inductively coupled plasma atomic emission spectrometry {译} 镍合金化学分析方法-第6部分：钼含量的测定-电感耦合等离子体原子发射光谱法 |
China National Standards method |
English PDF |
| GB/T 42513.7-2024 |
Chemical analysis methods for nickel alloys-Part 7: Determination of cobalt, chromium, copper, iron and manganese content-Flame atomic absorption spectrometry {译} 镍合金化学分析方法-第7部分：钴、铬、铜、铁和锰含量的测定-火焰原子吸收光谱法 |
China National Standards method |
English PDF |
| GB/T 4331-2024 |
Agricultural trailers-Test methods {译} 农用挂车-试验方法 |
China National Standards method |
English PDF |
| GB/T 43590.504-2024 |
Laser display devices-Part 5-4: Optical test methods for colored speckle {译} 激光显示器件-第5-4部分：彩色散斑的光学测试方法 |
China National Standards method |
English PDF |
| GB/T 43845-2024 |
Weak static magnetic field imaging measurement method based on scanning nitrogen-vacancy probe {译} 基于扫描氮-空位探针的微弱静磁场成像测量方法 |
China National Standards method |
English PDF |
| GB/T 43848-2024 |
Network Security Technology-Software Product Open Source Code Security Assessment =Price method {译} 网络安全技术-软件产品开源代码安全评价方法 |
China National Standards method |
English PDF |
| GB/T 43849-2024 |
Basic Environmental Test methods for Underwater Robot Complete Machines and Components-Hydrostatic Pressure Test Method {译} 水下机器人整机及零部件基本环境试验方法-水静压力试验方法 |
China National Standards method |
English PDF |
| GB/T 43853-2024 |
High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc method {译} 激光修复层高温摩擦磨损性能试验-球-盘法 |
China National Standards method |
English PDF |
| GB/T 43859-2024 |
Water Activity Meter Performance Determination method {译} 水分活度仪性能测定方法 |
China National Standards method |
English PDF |
| GB/T 43860.1210-2024 |
Touch and Interactive Display-Part 12-10: Touch Display Test method-Touch and Electrical Performance {译} 触摸和交互显示-第12-10部分：触摸显示测试方法-触摸和电性能 |
China National Standards method |
English PDF |
| GB/T 43860.1220-2024 |
Touch and Interactive Display-Part 12-20: Touch Display Test method-Multi-touch Performance {译} 触摸和交互显示-第12-20-部分：触摸显示测试方法-多点触摸性能 |
China National Standards method |
English PDF |
| GB/T 43861-2024 |
General Rules for Microwave Plasma Atomic Emission Spectroscopy methods {译} 微波等离子体原子发射光谱方法通则 |
China National Standards method |
English PDF |
| GB/T 43865-2024 |
General rules for direct sampling mercury analysis method {译} 直接进样测汞分析方法通则 |
China National Standards method |
English PDF |
| GB/T 43866-2024 |
Inspection method for the equipment rate of energy metering instruments in enterprises {译} 企业能源计量器具配备率检查方法 |
China National Standards method |
English PDF |
| GB/T 43870.1-2024 |
Measurement method of Curie temperature of magnetic materials - Part 1: permanent magnetic materials {译} 磁性材料居里温度的测量方法-第1部分：永磁材料 |
China National Standards method |
English PDF |
| GB/T 43870.2-2024 |
Measurement method of Curie temperature of magnetic materials - Part 2: soft magnetic materials {译} 磁性材料居里温度的测量方法-第2部分：软磁材料 |
China National Standards method |
English PDF |
| GB/T 43872-2024 |
Test method for cement chloride ion curing rate {译} 水泥氯离子固化率检测方法 |
China National Standards method |
English PDF |
| GB/T 43873-2024 |
Test method for upper and lower limit temperature of ultra-thin glass annealing {译} 超薄玻璃退火上下限温度试验方法 |
China National Standards method |
English PDF |
| GB/T 43874-2024 |
Test method for compression performance of glass materials and products {译} 玻璃材料及制品压缩性能试验方法 |
China National Standards method |
English PDF |
| GB/T 43875-2024 |
Determination method of total chromium in cement raw materials {译} 水泥原材料中总铬的测定方法 |
China National Standards method |
English PDF |
| GB/T 43876-2024 |
Determination method of cement paste viscosity {译} 水泥净浆黏度测定方法 |
China National Standards method |
English PDF |
| GB/T 43877-2024 |
Iron ore - determination method of assimilation performance {译} 铁矿石-同化性能测定方法 |
China National Standards method |
English PDF |
| GB/T 43881-2024 |
Test method for thermal expansion coefficient of low expansion glass line - laser interferometry {译} 低膨胀玻璃线热膨胀系数试验方法-激光干涉法 |
China National Standards method |
English PDF |
| GB/T 43883-2024 |
Microbeam analysis - analytical electron microscopy - determination method of the number density of nanoparticles in metals {译} 微束分析-分析电子显微术-金属中纳米颗粒数密度的测定方法 |
China National Standards method |
English PDF |
| GB/T 43886-2024 |
Imaging materials - Processed color photographs - Thermal stability measurement methods {译} 影像材料-已加工彩色照片-热稳定性测量方法 |
China National Standards method |
English PDF |
| GB/T 43888-2024 |
Ultrasonic testing method for rails {译} 钢轨超声检测方法 |
China National Standards method |
English PDF |
| GB/T 43891-2024 |
Non-metallic chemical equipment - Test method for heat transfer coefficient and flow resistance performance of impermeable graphite heat exchangers {译} 非金属化工设备-不透性石墨换热器传热系数和流阻性能测试方法 |
China National Standards method |
English PDF |
| GB/T 43892-2024 |
Spectral transmittance test method for quartz glass {译} 石英玻璃光谱透射比试验方法 |
China National Standards method |
English PDF |
| GB/T 43894.1-2024 |
Evaluation of near-edge geometry of semiconductor wafers - Part 1: High radial second derivative method (ZDD) {译} 半导体晶片近边缘几何形态评价-第1部分：高度径向二阶导数法（ZDD） |
China National Standards method |
English PDF |
| GB/T 43896-2024 |
Metallic materials - Ultra-high cycle fatigue - Ultrasonic fatigue test methods {译} 金属材料-超高周疲劳-超声疲劳试验方法 |
China National Standards method |
English PDF |
| GB/T 43899-2024 |
Pig iron - Determination of multi-element content - Spark discharge atomic emission spectrometry (conventional method) {译} 生铁-多元素含量的测定-火花放电原子发射光谱法（常规法） |
China National Standards method |
English PDF |
| GB/T 43900-2024 |
Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components {译} 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards method |
English PDF |
| GB/T 43905.1-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分：电弧焊中烟尘排放速率的测定和分析用烟尘的收集 |
China National Standards method |
English PDF |
| GB/T 43905.2-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 |
China National Standards method |
English PDF |
| GB/T 43905.3-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定 |
China National Standards method |
English PDF |
| GB/T 43905.4-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 4: Emission limits of welding fumes from welding materials {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第4部分：焊接材料焊接烟尘排放限值 |
China National Standards method |
English PDF |
| GB/T 43905.5-2024 |
Laboratory methods for sampling fumes and gases in welding and related processes - Part 5: Based on pyrolysis-gas chromatography-mass spectrometry Identification of thermal degradation products of organic materials in welding or cutting by the method {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第5部分：基于热解-气相色谱-质谱法的焊接或切割中有机材料热降解物的识别 |
China National Standards method |
English PDF |
| GB/T 43905.6-2024 |
Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分：电阻点焊中烟尘和气体的定量化测定 |
China National Standards method |
English PDF |
| GB/T 43911-2024 |
Evaluation methods for uncertainty in boiler thermal performance tests {译} 锅炉热工性能试验不确定度的评定方法 |
China National Standards method |
English PDF |
| GB/T 43915-2024 |
Test methods for nano-geometric standard samples {译} 纳米几何量标准样板测试方法 |
China National Standards method |
English PDF |
| GB/T 43925-2024 |
Full-size tensile stress corrosion test method for casing and oil pipes {译} 套管和油管全尺寸拉伸应力腐蚀试验方法 |
China National Standards method |
English PDF |
| GB/T 43938.1-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards method |
English PDF |
| GB/T 43938.2-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards method |
English PDF |
| GB/T 43939-2024 |
General test method for quartz flexible accelerometer servo circuit for aerospace {译} 宇航用石英挠性加速度计伺服电路通用测试方法 |
China National Standards method |
English PDF |
| GB/T 43940-2024 |
Test method for 4Mb/s digital time-division command/response multiplexed data bus {译} 4Mb/s数字式时分制指令/响应型多路传输数据总线测试方法 |
China National Standards method |
English PDF |
| GB/T 43941.1-2024 |
Technical requirements and test methods for high-speed modems in satellite-to-ground data transmission-Part 1: Modulator- {译} 星地数据传输中高速调制解调器技术要求和测试方法-第1部分:调制器- |
China National Standards method |
English PDF |
| GB/T 43942-2024 |
Risk assessment method for intelligent ships {译} 智能船舶风险评估方法 |
China National Standards method |
English PDF |
| GB/T 43944-2024 |
Ship interior materials =Measuring method for weighted sound insulation index of materials {译} 船舶内装材料计权隔声指数测量方法 |
China National Standards method |
English PDF |
| GB/T 43966-2024 |
General rules for high performance liquid chromatography - quadrupole inductively coupled plasma mass spectrometry combined method {译} 高效液相色谱-四极杆电感耦合等离子体质谱联用法通则 |
China National Standards method |
English PDF |
| GB/T 43967-2024 |
Space environment - single particle effect pulse laser test method for semiconductor devices for aerospace use {译} 空间环境-宇航用半导体器件单粒子效应脉冲激光试验方法 |
China National Standards method |
English PDF |
| GB/T 43968-2024 |
General rules for high performance liquid chromatography - atomic fluorescence spectrometer combined analysis methods {译} 高效液相色谱-原子荧光光谱仪联用分析方法通则 |
China National Standards method |
English PDF |
| GB/T 43970-2024 |
General rules for chemical vapor generation - atomic fluorescence spectrometry analysis methods {译} 化学蒸气发生-原子荧光光谱分析方法通则 |
China National Standards method |
English PDF |
| GB/T 43979-2024 |
Indoor LED display light comfort evaluation method {译} 室内LED显示屏光舒适度评价方法 |
China National Standards method |
English PDF |
| GB/T 43997.1-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 1: Single Channel method {译} 地表温度热红外遥感反演-第1部分：单通道法 |
China National Standards method |
English PDF |
| GB/T 43997.2-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 2: Split Window method {译} 地表温度热红外遥感反演-第2部分：分裂窗法 |
China National Standards method |
English PDF |
| GB/T 44003-2024 |
Mechanical Property Measurement - Test method for Delamination Strength of REBCO Coated Conductors (Copper Plating) {译} 力学性能测量-REBCO涂层导体（镀铜）脱层强度测试方法 |
China National Standards method |
English PDF |
| GB/T 44004-2024 |
Nanotechnology - Test methods for Characterization of Organic Transistors and Materials {译} 纳米技术-有机晶体管和材料表征试验方法 |
China National Standards method |
English PDF |
| GB/T 44006-2024 |
Infrared Image Temperature Representation Rules - RGB method {译} 红外图像温度表示规则-RGB法 |
China National Standards method |
English PDF |
| GB/T 44007-2024 |
Nanotechnology - Determination of Hydrogen Storage in Nanoporous Materials - Gas Adsorption method {译} 纳米技术-纳米多孔材料储氢量测定-气体吸附法 |
China National Standards method |
English PDF |
| GB/T 5121.8-2024 |
Chemical analysis methods for copper and copper alloys - Part 8: Determination of oxygen, nitrogen and hydrogen content {译} 铜及铜合金化学分析方法-第8部分：氧、氮、氢含量的测定 |
China National Standards method |
English PDF |
| GB/T 5484-2024 |
Chemical analysis methods for gypsum {译} 石膏化学分析方法 |
China National Standards method |
English PDF |
| GB/T 5762-2024 |
Chemical analysis methods for limestone, quicklime and slaked lime for building materials {译} 建材用石灰石、生石灰和熟石灰化学分析方法 |
China National Standards method |
English PDF |
| GB/T 6519-2024 |
Ultrasonic Inspection methods for Deformed Aluminum and Magnesium Alloy Products {译} 变形铝、镁合金产品超声波检验方法 |
China National Standards method |
English PDF |
| GB/T 6498-2024 |
Test method for Micronaire of Cotton Fiber {译} 棉纤维马克隆值试验方法 |
China National Standards method |
English PDF |
| GB/T 13777-2024 |
Test method for Maturity of Cotton Fiber-Microscopy {译} 棉纤维成熟度试验方法-显微镜法 |
China National Standards method |
English PDF |
| GB/T 23561.8-2024 |
methods for determination of physical and mechanical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock {译} 煤和岩石物理力学性质测定方法-第8部分：煤和岩石变形参数测定方法 |
China National Standards method |
English PDF |
| GB/T 1464-2024 |
Test method for sandwich structure or core density {译} 夹层结构或芯子密度试验方法 |
China National Standards method |
English PDF |
| GB/T 5275.1-2024 |
Gas analysis - Preparation of calibration gas mixtures by dynamic method - Part 1: General requirements {译} 气体分析-动态法制备校准用混合气体-第1部分：通用要求 |
China National Standards method |
English PDF |
| GB/T 7939.1-2024 |
Hydraulic transmission connections - Test methods - Part 1: Pipe joints {译} 液压传动连接-试验方法-第1部分：管接头 |
China National Standards method |
English PDF |
| GB/T 24926-2024 |
All-terrain vehicle braking performance requirements and test methods {译} 全地形车制动性能要求及试验方法 |
China National Standards method |
English PDF |
| GB/T 18003-2024 |
Artificial board machinery-Equipment model compilation method {译} 人造板机械-设备型号编制方法 |
China National Standards method |
English PDF |
| GB/T 43651-2024 |
Smart city infrastructure-quality evaluation methods and operation and maintenance requirements for thermal power station infrastructure {译} 智慧城市基础设施-火电站基础设施质量评价方法和运营维护要求 |
China National Standards method |
English PDF |
| GB/T 28893-2024 |
Surface chemical analysis-Auger electron spectroscopy and X-ray photoelectron spectroscopy-methods for determining peak intensity and information required for reporting results {译} 表面化学分析-俄歇电子能谱和X射线光电子能谱-测定峰强度的方法和报告结果所需的信息 |
China National Standards method |
English PDF |
| GB/T 43731-2024 |
General requirements for confirmation and validation of biological sample processing methods in biological sample banks {译} 生物样本库中生物样本处理方法的确认和验证通用要求 |
China National Standards method |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
