Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法 |
China National Standards method using the |
English PDF |
GB/T 42741-2023 |
Method for measuring electromagnetic parameters of solid materials using the free-space method {译} 固体材料使用自由空间法的电磁参数测量方法 |
China National Standards method using the |
English PDF |
GB/T 22459.2-2022 |
Refractory mortars—Part 2:Determination of consistency using the reciprocating flow table method 耐火泥浆 第2部分:稠度试验方法(跳桌法) |
China National Standards method using the |
English PDF |
GB/T 22459.1-2022 |
Refractory mortars—Part 1:Determination of consistency using the penetrating cone method 耐火泥浆 第1部分:稠度试验方法(锥入度法) |
China National Standards method using the |
English PDF |
GB/T 12966-2022 |
The methods for determining aluminium and aluminium alloys conductivity using eddy current 铝及铝合金电导率涡流测试方法 |
China National Standards method using the |
English PDF |
GB/T 22366-2022 |
Sensory analysis - Methodology - General guidelines for the determination of smell, taste and flavor perception thresholds using the three-point forced choice method (3-AFC) {译} 感官分析 方法学 采用三点强迫选择法(3-AFC)测定嗅觉、味觉和风味觉察阈值的一般导则 |
China National Standards method using the |
English PDF |
GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards method using the |
English PDF |
GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards method using the |
English PDF |
GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards method using the |
English PDF |
GB/T 39528-2020 |
Test method for determining the seismic drift causing the panels fallout from curtain wall system 建筑幕墙面板抗地震脱落检测方法 |
China National Standards method using the |
English PDF |
GB/T 37630-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acetate or triacetate with certain other fibres(method using hydrochloric acid) 纺织品 定量化学分析 醋酯纤维或三醋酯纤维与某些其他纤维的混合物(盐酸法) |
China National Standards method using the |
English PDF |
GB/T 37629-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acrylic with certain other fibres(method using formic acid and zinc chloride) 纺织品 定量化学分析 聚丙烯腈纤维与某些其他纤维的混合物(甲酸/氯化锌法) |
China National Standards method using the |
English PDF |
GB/T 11026.10-2019 |
Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy 电气绝缘材料 耐热性 第10部分:利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则 |
China National Standards method using the |
English PDF |
GB/T 27419-2018 |
Guide to the evaluation and expression of uncertainty in measurement—Supplement 1: Propagation of distributions using a Monte Carlo method 测量不确定度评定和表示 补充文件1: 基于蒙特卡洛方法的分布传播 |
China National Standards method using the |
English PDF |
GB/T 36060-2018 |
Process control and testing methods on the water-based adhesives using in hardcover book binding production 精装书籍用水基胶黏剂粘接过程控制要求及检验方法 |
China National Standards method using the |
English PDF |
GB/T 20485.42-2018 |
Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity 振动与冲击传感器校准方法 第42部分:高精度地震计的重力加速度法校准 |
China National Standards method using the |
English PDF |
GB/T 22319.11-2018 |
Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction 石英晶体元件参数的测量 第11部分:采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法 |
China National Standards method using the |
English PDF |
GB/T 13885-2017 |
Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc in feeds—Method using atomic absorption spectrometry 饲料中钙、铜、铁、镁、锰、钾、钠和锌含量的测定 原子吸收光谱法 |
China National Standards method using the |
English PDF |
GB/T 19587-2017 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards method using the |
English PDF |
GB/T 35392-2017 |
Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method 无损检测 电导率电磁(涡流)测定方法 |
China National Standards method using the |
English PDF |
GB/T 2910.25-2017 |
Textiles—Quantitative chemical analysis—Part 25:Mixtures of polyester and certain other fibres(method using trichloroacetic acid and chloroform) 纺织品 定量化学分析 第25部分:聚酯纤维与某些其他纤维的混合物(三氯乙酸/三氯甲烷法) |
China National Standards method using the |
English PDF |
GB/T 35257-2017 |
Textiles—Quantitative chemical analysis—Mixtures of chitosan and certain other fibers(method using acetic acid) 纺织品 定量化学分析 壳聚糖纤维与某些其他纤维的混合物 (乙酸法) |
China National Standards method using the |
English PDF |
GB/T 24131.2-2017 |
Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit 生橡胶 挥发分含量的测定 第2部分:带红外线干燥单元的自动分析仪加热失重法 |
China National Standards method using the |
English PDF |
GB/T 32696-2016 |
Photography—Determination of residual thiosulfate and other related chemicals in processed photographic materials—Methods using iodine-amylose,methylene blue and silver sulfide 摄影 已加工过的摄影材料上残留的硫代硫酸盐和其它相关的化学品的测定方法 碘直链淀粉、亚甲基蓝和硫化银法 |
China National Standards method using the |
English PDF |
GB/T 20236-2015 |
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight 非金属材料的聚光加速户外暴露试验方法 |
China National Standards method using the |
English PDF |
GB/T 32088-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus 汽车非金属部件及材料氙灯加速老化试验方法 |
China National Standards method using the |
English PDF |
GB/T 31884-2015 |
Automatic detection system of tire/pavement noise using the on-board sound intensity method 车载式轮胎路面噪声自动测试系统 |
China National Standards method using the |
English PDF |
GB/T 31881-2015 |
Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus 汽车非金属部件及材料紫外加速老化试验方法 |
China National Standards method using the |
English PDF |
GB/T 5275.7-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow controllers 气体分析 动态体积法制备校准用混合气体 第7部分:热式质量流量控制器 |
China National Standards method using the |
English PDF |
GB/T 10870-2014 |
The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle 蒸气压缩循环冷水(热泵)机组性能试验方法 |
China National Standards method using the |
English PDF |
GB/T 11026.8-2014 |
Electrical insulating materials―Thermal endurance properties―Part 8: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method 电气绝缘材料 耐热性 第8部分:用固定时限法确定绝缘材料的耐热指数(TI和RTE) |
China National Standards method using the |
English PDF |
GB/T 3923.2-2013 |
Textiles - Tensile properties of fabrics - Part 2 :Determination of maximum force using the grab method 纺织品 织物拉伸性能 第2部分:断裂强力的测定(抓样法) |
China National Standards method using the |
English PDF |
GB/T 3923.1-2013 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method 纺织品 织物拉伸性能 第1部分:断裂强力和断裂伸长率的测定(条样法) |
China National Standards method using the |
English PDF |
GB/T 30011-2013 |
Measure method for new energy using rate on ship - The ship with gas/oil mixed fuel engine 船舶新能源使用比例测定方法 天然气/燃油混合燃料动力船舶 |
China National Standards method using the |
English PDF |
GB/T 29088-2012 |
Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method 金属和合金的腐蚀 双环电化学动电位再活化测量方法 |
China National Standards method using the |
English PDF |
GB/T 3681-2011 |
Plastics methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors 塑料 自然日光气候老化、玻璃过滤后日光气候老化和菲涅耳镜加速日光气候老化的暴露试验方法 |
China National Standards method using the |
English PDF |
GB/T 27760-2011 |
Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps 利用Si(111)晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法 |
China National Standards method using the |
English PDF |
GB/T 24853-2010 |
General pasting method for wheat or rye flour or starch - Using the rapid visco analyzer 小麦、黑麦及其粉类和淀粉糊化特性测定 快速粘度仪法 |
China National Standards method using the |
English PDF |
GB/T 24522-2009 |
Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法 |
China National Standards method using the |
English PDF |
GB/T 2910.7-2009 |
Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) 纺织品 定量化学分析 第7部分:聚酰胺纤维与某些其他纤维混合物(甲酸法) |
China National Standards method using the |
English PDF |
GB/T 2910.4-2009 |
Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibers (method using hypochlorite) 纺织品 定量化学分析 第4部分:某些蛋白质纤维与某些其他纤维的混合物(次氯酸盐法) |
China National Standards method using the |
English PDF |
GB/T 2910.3-2009 |
Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) 纺织品 定量化学分析 第3部分:醋酯纤维与某些其他纤维的混合物(丙酮法) |
China National Standards method using the |
English PDF |
GB/T 2910.24-2009 |
Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane) 纺织品 定量化学分析 第24部分:聚酯纤维与某些其他纤维的混合物(苯酚/四氯乙烷法) |
China National Standards method using the |
English PDF |
GB/T 2910.21-2009 |
Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibers, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibers (method using cyclohexanone) 纺织品 定量化学分析 第21部分:含氯纤维、某些改性聚丙烯腈纤维、某些弹性纤维、醋酯纤维、三醋酯纤维与某些其他纤维的混合物(环己酮法) |
China National Standards method using the |
English PDF |
GB/T 2910.20-2009 |
Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and some other fibers (method of using dimethylacetamide) 纺织品 定量化学分析 第20部分:聚氨酯弹性纤维与某些其他纤维的混合物(二甲基乙酰胺法) |
China National Standards method using the |
English PDF |
GB/T 2910.17-2009 |
Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibers (homopolymers of vinyl chloride) and certain other fibers (method using sulfuric acid) 纺织品 定量化学分析 第17部分:含氯纤维(氯乙烯均聚物)与某些其他纤维的混合物(硫酸法) |
China National Standards method using the |
English PDF |
GB/T 2910.16-2009 |
Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene and certain other fibres (method using xylene) 纺织品 定量化学分析 第16部分:聚丙烯纤维与某些其他纤维的混合物(二甲苯法) |
China National Standards method using the |
English PDF |
GB/T 2910.13-2009 |
Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibers and certain other fibers(method using carbon disulfide /acetone) 纺织品 定量化学分析 第13部分:某些含氯纤维与某些其他纤维的混合物(二硫化碳/丙酮法) |
China National Standards method using the |
English PDF |
GB/T 2910.12-2009 |
Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic,certain modacrylic,certain chlorofibres,certain elastanes and certain other fibres (method using dimethylformamide ) 纺织品 定量化学分析 第12部分:聚丙烯腈纤维、某些改性聚丙烯腈纤维、某些含氯纤维或某些弹性纤维与某些其他纤维的混合物(二甲基甲酰胺法) |
China National Standards method using the |
English PDF |
GB/T 2910.10-2009 |
Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) 纺织品 定量化学分析 第10部分:三醋酯纤维或聚乳酸纤维与某些其他纤维的混合物(二氯甲烷法) |
China National Standards method using the |
English PDF |
GB/T 23912-2009 |
Non-destructive testing - Practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves 无损检测 液浸式超声纵波脉冲反射检测方法 |
China National Standards method using the |
English PDF |
GB/T 22838.16-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage 卷烟和滤棒物理性能的测定 第16部分:卷烟 端部掉落烟丝的测定 旋转笼法 |
China National Standards method using the |
English PDF |
GB/T 22906.3-2008 |
Testing of cores - Part 3: Determination of moisture content using the oven drying method 纸芯的测定 第3部分:水分含量的测定(烘箱干燥法) |
China National Standards method using the |
English PDF |
GB/T 22459.2-2008 |
Refractory mortars - Part 2: Determination of consistency using the reciprocating flow table method 耐火泥浆 第2部分:稠度试验方法(跳桌法) |
China National Standards method using the |
English PDF |
GB/T 22459.1-2008 |
Refractory mortars - Part 1: Determination of consistency using the penetrating cone method 耐火泥浆 第1部分:稠度试验方法(锥入度法) |
China National Standards method using the |
English PDF |
GB/T 139-2008 |
Standard method for using the ferrous sulfat (fricke) dosimeter to measure absorbed dose in water 使用硫酸亚铁剂量计测量水中吸收剂量的标准方法 |
China National Standards method using the |
English PDF |
GB/T 5535.1-2008 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Part 1: Method using diethyl ether extraction 动植物油脂 不皂化物测定 第1部分:乙醚提取法 |
China National Standards method using the |
English PDF |
GB/T 15247-2008 |
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method 微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法 |
China National Standards method using the |
English PDF |
GB/T 22293-2008 |
Ginger and its oleoresins - Determination of the main pungent components (gingerols and shogaols)- Method using high-performance liquid chromatography 姜及其油树脂 主要刺激成分测定 HPLC法 |
China National Standards method using the |
English PDF |
GB/T 13773.2-2008 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method 纺织品 织物及其制品的接缝拉伸性能 第2部分:抓样法接缝强力的测定 |
China National Standards method using the |
English PDF |
GB/T 13773.1-2008 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method 纺织品 织物及其制品的接缝拉伸性能 第1部分:条样法接缝强力的测定 |
China National Standards method using the |
English PDF |
GB/T 12966-2008 |
The method for determining aluminum alloys conductivity using eddy current 铝合金电导率涡流测试方法 |
China National Standards method using the |
English PDF |
GB/T 21870-2008 |
Medical gloves made from natural rubber latex - Determination of water-extractable protein using the modified Lowry method 天然胶乳医用手套水抽提蛋白质的测定 改进Lowry法 |
China National Standards method using the |
English PDF |
GB/T 22838.17-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 17: Cigarettes - Determination of loss of tobacco from the ends - Method using a vibro-bench 卷烟和滤棒物理性能的测定 第17部分:卷烟 端部掉落烟丝的测定 振动法 |
China National Standards method using the |
English PDF |
GB/T 17248.6-2007 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity 声学 机器和设备发射的噪声 声强法现场测定工作位置和其它指定位置发射声压级的工程法 |
China National Standards method using the |
English PDF |
GB/T 21198.2-2007 |
Determination of precious metals in precious metals jewellery alloys - Method using ICP spectrometry - Part 2:Platinum jewellery alloys - Determination of platinum - method using the intensity ratios of all minor constituents with reference to platinum 贵金属合金首饰中贵金属含量的测定 ICP光谱法 第2部分:铂合金首饰 铂含量的测定 采用所有微量元素与铂强度比值法 |
China National Standards method using the |
English PDF |
GB/T 18778.3-2006 |
Geometrical Product Specifications(GPS) - Surface texture: Profile method - Surface having stratified functional properties - Part 3: Height characterization using the material probability curve 产品几何技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第3部分: 用概率支承率曲线表征高度特性 |
China National Standards method using the |
English PDF |
GB/T 20249-2006 |
Acoustics - Definitions and measurement methods for the transmitted fields of focusing ultrasonic transducers 声学 聚焦超声换能器发射场特性的定义与测量方法 |
China National Standards method using the |
English PDF |
GB/T 20379-2006 |
Starch derivatives - Determination of the composition of glucose syrups,fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography 淀粉衍生物 葡萄糖浆、果糖浆和氢化葡萄糖浆成分的测定 高效液相色谱法 |
China National Standards method using the |
English PDF |
GB/T 20082-2006 |
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope 液压传动 液体污染 采用光学显微镜测定颗粒污染度的方法 |
China National Standards method using the |
English PDF |
GB/T 19587-2004 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards method using the |
English PDF |
GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards method using the |
English PDF |
GB/T 13885-2003 |
Animal feeding stuffs--Determination of thecontents of calcium,copper,iron,magnesium,manganese,potassium,sodium and zinc--Method using atomic absorption spectrometry 动物饲料中钙、铜、铁、镁、锰、钾、钠和锌含量的测定 原子吸收光谱法 |
China National Standards method using the |
English PDF |
GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards method using the |
English PDF |
GB/T 18105-2000 |
Method for determination of the processing degree of rice and other grain kernels using iso-color-phase differential staining(IDS) 米类加工精度异色相差分染色检验法(IDS法) |
China National Standards method using the |
English PDF |
GB/T 9405-1995 |
Performance and test methods of the third order digital multiplex equipment operating at 34368 kbit/s and using positive justification 34368kbit/s 正码速调整三次群数字复用设备技术要求和测试方法 |
China National Standards method using the |
English PDF |
GB/T 7254-1995 |
Performanceand methods of the second order digital multiplex equipment operating at 8448 kbit/s and using positive justification 8448 kbit/s正码速调整二次群数字复用设备技术要求和测试方法 |
China National Standards method using the |
English PDF |
GB/T 11324-1995 |
Performance and test methods of the fourth order digital multiplex equimpent operatingat 139264 kbit/s and using positive justification 139264kbit/s正码速调整四次群数字复用设备技术要求和测试方法 |
China National Standards method using the |
English PDF |
GB/T 11114-1989 |
Method for detecting dislocationsof synthetic quartz crystal using X-ray topographic technique 人造石英晶体位错的X 射线形貌检测方法 |
China National Standards method using the |
English PDF |
Find out:79Items | To Page of: First -Previous-Next -Last | 1 |