Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7260.3-2024 |
Uninterruptible power supply systems (UPS) - Part 3: Methods for determining performance and test requirements {译} 不间断电源系统（UPS）-第3部分：确定性能和试验要求的方法 |
China National Standards mining |
 English PDF |
| GB-14585-2024 |
Technical regulations for radiation environment management of radioactive waste from uranium mining and metallurgy {译} 铀矿冶放射性废物辐射环境管理技术规定 |
China National Standards mining |
English PDF |
| GB-31335-2024 |
Energy consumption limit per unit product for iron ore mining and ore dressing {译} 铁矿开采和选矿单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB-32032-2024 |
Energy consumption limit per unit product for gold mining, smelting and gold refining {译} 金矿开采、选冶和金精炼单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB/Z 43963-2024 |
Guide to determining the values of electrical clearances, creepage distances and solid insulation requirements for equipment with rated voltages above 1000V to 2000V AC and above 1500V to 3000V DC {译} 确定额定电压在交流1000V以上至2000V，直流1500V以上至3000V间设备的电气间隙、爬电距离的数值以及对固体绝缘要求的指南 |
China National Standards mining |
English PDF |
| GB/Z 44002-2024 |
Space environment - Methods for determining solar energy proton injection and peak flux {译} 空间环境-太阳能量质子注量和峰值通量的确定方法 |
China National Standards mining |
English PDF |
| GB/T 18153-2024 |
Safety of machinery - Safety data for determining the temperature limit of accessible hot surfaces {译} 机械安全-用于确定可接触热表面温度限值的安全数据 |
China National Standards mining |
English PDF |
| GB/T 28893-2024 |
Surface chemical analysis-Auger electron spectroscopy and X-ray photoelectron spectroscopy-methods for determining peak intensity and information required for reporting results {译} 表面化学分析-俄歇电子能谱和X射线光电子能谱-测定峰强度的方法和报告结果所需的信息 |
China National Standards mining |
English PDF |
| GB/T 21008-2023 |
Safety requirements for underground mining aerial ropeways {译} 地下矿用架空索道 安全要求 |
China National Standards mining |
English PDF |
| GB/T 7679.3-2023 |
mining Machinery Terminology Part 3: Lifting Equipment {译} 矿山机械术语 第3部分：提升设备 |
China National Standards mining |
English PDF |
| GB/T 43388-2023 |
Guidelines for Determining Serious Safety Performance Faults in Household Automotive Products {译} 家用汽车产品严重安全性能故障判断指南 |
China National Standards mining |
English PDF |
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards mining |
English PDF |
| GB 43069-2023 |
Safety technical requirements for mining cables {译} 矿用电缆安全技术要求 |
China National Standards mining |
English PDF |
| GB/T 7679.1-2023 |
mining Machinery Terminology Part 1: Extraction Equipment {译} 矿山机械术语 第1部分：采掘设备 |
China National Standards mining |
English PDF |
| GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-sectional images of layered materials {译} 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards mining |
English PDF |
| GB/T 42553-2023 |
Electroacoustics - Method for determining free-field response corrections for sound level meters {译} 电声学 确定声级计自由场响应修正值的方法 |
China National Standards mining |
English PDF |
| GB/T 42362-2023 |
Specification for evaluation of damage degree of groundwater aquifer damage in mining areas {译} 矿区地下水含水层破坏危害程度评价规范 |
China National Standards mining |
English PDF |
| GB/T 25523-2022 |
mining Machinery Front Shovel Excavator Safety Requirements {译} 矿用机械正铲式挖掘机 安全要求 |
China National Standards mining |
English PDF |
| GB/T 12966-2022 |
The methods for determining aluminium and aluminium alloys conductivity using eddy current 铝及铝合金电导率涡流测试方法 |
China National Standards mining |
English PDF |
| GB/T 42082-2022 |
mining rock drilling rigs and anchor drilling rigs Safety requirements {译} 矿用岩石钻机和锚固钻机 安全要求 |
China National Standards mining |
English PDF |
| GB/Z 42285-2022 |
Road vehicles - Guidelines for determining the ASIL level of electrical and electronic systems {译} 道路车辆 电子电气系统ASIL等级确定方法指南 |
China National Standards mining |
English PDF |
| GB/T 42251-2022 |
Technical Regulations for Ecological Restoration in mining Subsidence Area {译} 采矿沉陷区生态修复技术规程 |
China National Standards mining |
English PDF |
| GB/T 32877-2022 |
Specific test methods for determining losses and efficiency of frequency converter-fed a.c. motors {译} 变频器供电交流电动机确定损耗和效率的特定试验方法 |
China National Standards mining |
English PDF |
| GB/T 21404-2022 |
Internal combustion engines - Methods of determining and measuring engine power - General requirements {译} 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards mining |
English PDF |
| GB/T 41862-2022 |
Earthmoving and mining Machinery Autonomous and Semi-Autonomous Machine Systems Safety {译} 土方及矿山机械 自主和半自主机器系统安全 |
China National Standards mining |
English PDF |
| GB/T 40407-2021 |
X-ray powder diffraction analysis method for determining the phases in portland cement clinker 硅酸盐水泥熟料矿相X射线衍射分析方法 |
China National Standards mining |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards mining |
English PDF |
| GB/T 19559-2021 |
Method of determining coalbed methane content 煤层气含量测定方法 |
China National Standards mining |
English PDF |
| GB/T 40485-2021 |
Method of determining automatically the random reflectance of vitrinite in coal—Image analysis method 煤的镜质体随机反射率自动测定 图像分析法 |
China National Standards mining |
English PDF |
| GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards mining |
English PDF |
| GB/T 40294-2021 |
Methods for determining electrically excited synchronous machine quantities from tests 确定电励磁同步电机参数的试验方法 |
China National Standards mining |
English PDF |
| GB/T 40260-2021 |
Test method for determining gas permeability of polymer membrane materials 高分子膜材料气体渗透性能测试方法 |
China National Standards mining |
English PDF |
| GB/T 12719-2021 |
Exploration specification of hydrogeology and engineering geology in mining areas 矿区水文地质工程地质勘查规范 |
China National Standards mining |
English PDF |
| GB/T 39826-2021 |
Fine ceramics—Determining flexural bond strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards mining |
English PDF |
| GB/T 39834-2021 |
Technical requirement of fully mechanized bag filling mining with paste 综合机械化膏体袋式充填采煤技术要求 |
China National Standards mining |
English PDF |
| GB/T 39828-2021 |
Test method for determining elastic modulus of thick ceramic coating at elevated temperature 陶瓷厚涂层的高温弹性模量试验方法 |
China National Standards mining |
English PDF |
| GB/T 41044-2021 |
Guidelines for coalbed methane extraction in coal mining areas 煤矿区煤层气抽采指南 |
China National Standards mining |
English PDF |
| GB/T 10762-2021 |
Method of mass measurements for industrial and mining electric locomotive 工矿电机车质量测量方法 |
China National Standards mining |
English PDF |
| GB/T 41060-2021 |
Test method for determining frost resistance of cement mortar 水泥胶砂抗冻性试验方法 |
China National Standards mining |
English PDF |
| GB/T 4214.10-2021 |
Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values 家用和类似用途电器噪声测试方法 确定和检验噪声明示值的程序 |
China National Standards mining |
English PDF |
| GB/T 40736-2021 |
Mobile freight ropeway used in mining—Safety specifications 矿用移动式货运索道 安全规范 |
China National Standards mining |
English PDF |
| GB/T 4652-2021 |
Loader for underground mining—Testing method 地下矿用装岩机和装载机 试验方法 |
China National Standards mining |
English PDF |
| GB/T 25285.2-2021 |
Explosive atmospheres—Explosion prevention and protection—Part 2:Basic concepts and methodology for mining 爆炸性环境 爆炸预防和防护 第2部分：矿山爆炸预防和防护的基本原则和方法 |
China National Standards mining |
English PDF |
| GB/T 50532-2021 |
Coal industry design code of repairing facilities for electro-mechanical equipment of mining district 煤炭工业矿区机电设备修理设施设计标准 |
China National Standards mining |
English PDF |
| GB 23727-2020 |
Regulations for radiation protection and radiation environment protection in uranium mining and milling 铀矿冶辐射防护和辐射环境保护规定 |
China National Standards mining |
English PDF |
| GB/T 38498-2020 |
Evaluation method for determining metal corrosion of disinfectant 消毒剂金属腐蚀性评价方法 |
China National Standards mining |
English PDF |
| GB/T 39688-2020 |
Testing method for determining density of ceramic coatings 陶瓷涂层密度的测试方法 |
China National Standards mining |
English PDF |
| GB/T 39686-2020 |
Test method for determining elastic modulus and strength of thick ceramic coatings 陶瓷厚涂层的弹性模量与强度试验方法 |
China National Standards mining |
English PDF |
| GB/T 39685-2020 |
Test method for determining bonding strength of ceramic coatings 陶瓷覆层结合强度试验方法 |
China National Standards mining |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards mining |
English PDF |
| GB/T 24635.1-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第1部分：概要和计量特性 |
China National Standards mining |
English PDF |
| GB/T 39528-2020 |
Test method for determining the seismic drift causing the panels fallout from curtain wall system 建筑幕墙面板抗地震脱落检测方法 |
China National Standards mining |
English PDF |
| GB/T 39427-2020 |
Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source 无损检测 工业Ir192伽玛射线源尺寸测定方法 |
China National Standards mining |
English PDF |
| GB/T 39338-2020 |
Technical requirements of solid-filling in fully-mechanized coal mining 综合机械化固体充填采煤技术要求 |
China National Standards mining |
English PDF |
| GB/T 39337-2020 |
Technical requirement of fully mechanized bag filling mining with superhigh-water material 综合机械化超高水材料袋式充填采煤技术要求 |
China National Standards mining |
English PDF |
| GB/T 39421-2020 |
Methods for determining the static gel strength of cement formulations 水泥浆静胶凝强度测定方法 |
China National Standards mining |
English PDF |
| GB/T 1741-2020 |
Test method for determining the resistance of paints film to mold 漆膜耐霉菌性测定法 |
China National Standards mining |
English PDF |
| GB/T 37983-2019 |
Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation 晶体材料X射线衍射仪旋转定向测试方法 |
China National Standards mining |
English PDF |
| GB/T 37977.23-2019 |
Electrostatics—Part 2-3：Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation 静电学 第2-3部分：防静电固体平面材料电阻和电阻率的测试方法 |
China National Standards mining |
English PDF |
| GB/T 37923-2019 |
Trackless mining truck for open-pit mines—Safety requirements 露天矿用无轨运矿车 安全要求 |
China National Standards mining |
English PDF |
| GB/T 37835-2019 |
Process for determining solar irradiances 太阳辐照度确定过程一般要求 |
China National Standards mining |
English PDF |
| GB/T 37815-2019 |
General specification for intelligent dust fall system in fully-mechanized mining and top coal caving mining face 综采综放工作面智能降尘系统技术条件 |
China National Standards mining |
English PDF |
| GB/T 37814-2019 |
Technical specification for remote power supply system in fully-mechanized mining and top coal caving mining face 综采综放工作面远距离供电系统技术规范 |
China National Standards mining |
English PDF |
| GB/T 37812-2019 |
General matching specification for fully-mechanized top coal caving mining face in deeply inclined coal seam 大倾角综放工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37811-2019 |
General matching specification for fully-mechanized top coal caving mining longwall face 综采放顶煤工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37810-2019 |
General matching specification for large cutting height mining face 大采高综采工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37809-2019 |
General matching specification for fully-mechanized coal mining face in deeply inclined coal seam 大倾角综采工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37808-2019 |
Design specification for conventional power supply system in fully-mechanized mining and top coal caving mining face 综采综放工作面常规供电系统设计规范 |
China National Standards mining |
English PDF |
| GB/T 37806-2019 |
General matching specification for fully-mechanized mining face in thin seam 薄煤层综采工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37611-2019 |
General specification for advance support system in fully-mechanized mining and top coal caving mining face 综采综放工作面超前支护系统技术条件 |
China National Standards mining |
English PDF |
| GB/T 25217.7-2019 |
Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress 冲击地压测定、监测与防治方法 第7部分：采动应力监测方法 |
China National Standards mining |
English PDF |
| GB/T 25217.12-2019 |
Methods for test, monitoring and prevention of rock burst—Part 12: Prevention method of protective seam mining 冲击地压测定、监测与防治方法 第12部分：开采保护层防治方法 |
China National Standards mining |
English PDF |
| GB/T 37771-2019 |
General matching guideline for fully-mechanized mining face 煤矿综采工作面总体配套导则 |
China National Standards mining |
English PDF |
| GB/T 37768-2019 |
General matching specification for fully-mechanized mining face in medium-thickness coal seam 中厚煤层综采工作面总体配套技术条件 |
China National Standards mining |
English PDF |
| GB/T 37574-2019 |
Methods of investigation and assesment for water resources environment investigation in mining subsidence area 采煤塌陷区水资源环境调查与评价方法 |
China National Standards mining |
English PDF |
| GB/T 51339-2018 |
Non-coal mine mining terminology standard 非煤矿山采矿术语标准 |
China National Standards mining |
English PDF |
| GB/T 36260.2-2018 |
Detection ability - Part 2: Method for determining the detection limit of linear calibration 检出能力-第2部分：线性校准情形检出限的确定方法 |
China National Standards mining |
English PDF |
| GB/T 36231.2-2018 |
mining machinery—Graphical symbols—Part 2: Mineral filter processing equipment 矿山机械 图形符号 第2部分：矿物选别加工处理设备 |
China National Standards mining |
English PDF |
| GB/T 36231.1-2018 |
mining machinery—Graphical symbols—Part1:Mining equipment of mineral 矿山机械 图形符号 第1部分：矿物开采设备 |
China National Standards mining |
English PDF |
| GB/T 25442-2018 |
Standard methods for determining losses and efficiency of rotation electrical machines from tests（excluding machines for traction vehicles） 旋转电机（牵引电机除外）确定损耗和效率的试验方法 |
China National Standards mining |
English PDF |
| GB/T 1557-2018 |
Test method for determining interstitial oxygen content in silicon by infrared absorption 硅晶体中间隙氧含量的红外吸收测量方法 |
China National Standards mining |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards mining |
English PDF |
| GB/T 34862-2017 |
Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors 确定三相低压笼型感应电动机等值电路参数的试验方法 |
China National Standards mining |
English PDF |
| GB/T 34861-2017 |
Specific methods for determining separate losses of large machines from tests 确定大电机各项损耗的专用试验方法 |
China National Standards mining |
English PDF |
| GB/T 34850-2017 |
Weighing instruments for mining car in motion 动态（矿用）轻轨衡 |
China National Standards mining |
English PDF |
| GB/T 34724-2017 |
Accelerated method of determining corrosion rate of metal in contact with preservative treated wood 接触防腐木材的金属腐蚀速率加速测定方法 |
China National Standards mining |
English PDF |
| GB/T 34726-2017 |
Method of determining corrosion rate of metal in contact with wood preservative 木材防腐剂对金属的腐蚀速率测定方法 |
China National Standards mining |
English PDF |
| GB/T 27204-2017 |
Confromity assessment—Guidelines for determining the duration of management system certification audits 合格评定 确定管理体系认证审核时间指南 |
China National Standards mining |
English PDF |
| GB/T 34338-2017 |
Test methods for determining mechanical properties of sealing glass for vacuum glazing 真空玻璃用熔封玻璃力学性能试验方法 |
China National Standards mining |
English PDF |
| GB/T 34608-2017 |
Water saving enterprises—Iron ore mining and mineral processing industry 节水型企业 铁矿采选行业 |
China National Standards mining |
English PDF |
| GB/T 14445-2017 |
Carbide products for coal mining tools 煤炭采掘工具用硬质合金制品 |
China National Standards mining |
English PDF |
| GB/T 34641-2017 |
Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination 无损检测 直接热中子照相检测的像质测定方法 |
China National Standards mining |
English PDF |
| GB/T 34167-2017 |
Gold mining industry terminology 黄金矿业术语 |
China National Standards mining |
English PDF |
| GB/T 34210-2017 |
Test method for determining the orientation of sapphire single crystal 蓝宝石单晶晶向测定方法 |
China National Standards mining |
English PDF |
| GB/T 10604-2017 |
Electric mining rope shovel 矿用机械正铲式挖掘机 |
China National Standards mining |
English PDF |
| GB/T 33933.2-2017 |
Natural stone mining equipments—Safety requirements—Part 2: Diamond wire saws 天然石开采设备 安全要求 第2部分：金刚石串珠锯 |
China National Standards mining |
English PDF |
| GB/T 33932-2017 |
Forklift loaders for natural stone mining—Safety requirements 天然石开采叉装车 安全要求 |
China National Standards mining |
English PDF |
| GB/T 33933.3-2017 |
Natural stone mining equipments—Safety requirements—Part 3: Arm type sawing machine 天然石开采设备 安全要求 第3部分：臂式锯切机 |
China National Standards mining |
English PDF |
| GB/T 33933.1-2017 |
Natural stone mining equipments—Safety requirements—Part 1:Disk sawing machine 天然石开采设备 安全要求 第1部分：圆盘式锯切机 |
China National Standards mining |
English PDF |
| GB/T 33921-2017 |
Underground rubber-tyred mining machines—Performance requirements and test procedures for brake systems 地下轮胎式采矿车辆 制动系统的性能要求和试验方法 |
China National Standards mining |
English PDF |
| GB/T 33815-2017 |
Technical specification for wastewater treatment of iron ore mining and mineral processing enterprises 铁矿石采选企业污水处理技术规范 |
China National Standards mining |
English PDF |
| GB/T 35392-2017 |
Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method 无损检测 电导率电磁（涡流）测定方法 |
China National Standards mining |
English PDF |
| GB/T 8286-2017 |
mining flameproof movable substations 矿用隔爆型移动变电站 |
China National Standards mining |
English PDF |
| GB/T 35193-2017 |
Earth-moving machinery—Non-road mechanical drive mining dumpers—Test methods 土方机械 非公路机械传动矿用自卸车 试验方法 |
China National Standards mining |
English PDF |
| GB/T 35214-2017 |
Standard method for determining fixation times of inorganic waterborne wood preservatives 无机水载型木材防腐剂固着时间的确定方法 |
China National Standards mining |
English PDF |
| GB/T 35196-2017 |
Earth-moving machinery—Non-road electrical drive mining dumpers—Technical specifications 土方机械 非公路电传动矿用自卸车 技术条件 |
China National Standards mining |
English PDF |
| GB/T 35197-2017 |
Earth-moving machinery—Non-road electrical drive mining dumpers—Test methods 土方机械 非公路电传动矿用自卸车 试验方法 |
China National Standards mining |
English PDF |
| GB/T 35347-2017 |
Power-driven vehicle safety technology examining-testing station 机动车安全技术检测站 |
China National Standards mining |
English PDF |
| GB/T 35195-2017 |
Earth-moving machinery—Non-road mechanical drive mining dumpers—Technical specifications 土方机械 非公路机械传动矿用自卸车 技术条件 |
China National Standards mining |
English PDF |
| GB/T 33298-2016 |
Standard test method for determining cetane number of diesel fuels—Airflow regulation 柴油十六烷值的测定 风量调节法 |
China National Standards mining |
English PDF |
| GB/T 33210-2016 |
Non-destructive testing—Test method for determining residual stresses by electromagnetic technology 无损检测 残余应力的电磁检测方法 |
China National Standards mining |
English PDF |
| GB/T 33043-2016 |
Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber 人造板甲醛释放量测定大气候箱法 |
China National Standards mining |
English PDF |
| GB/T 32877-2016 |
Specific test methods for determining losses and efficiency of converter-fed AC induction motors 变频器供电交流感应电动机确定损耗和效率的特定试验方法 |
China National Standards mining |
English PDF |
| GB/T 32650-2016 |
Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry(ICP-MS) 电感耦合等离子质谱法检测石英砂中痕量元素 |
China National Standards mining |
English PDF |
| GB/T 51169-2016 |
Standard for mining machine of coal mine 煤炭工业矿井采掘设备配备标准 |
China National Standards mining |
English PDF |
| GB/Z 32490-2016 |
Surface chemical analysis—X-ray photoelectron spectroscopy—Procedures for determining backgrounds 表面化学分析 X射线光电子能谱 确定本底的程序 |
China National Standards mining |
English PDF |
| GB/T 32553-2016 |
Fluorspar—Method of determining the precision of sampling and sample preparation 萤石 取样和制样精密度的试验方法 |
China National Standards mining |
English PDF |
| GB 32032-2015 |
The norm of energy consumption per unit products of gold mining 金矿开采单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB/T 31984-2015 |
Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA) 光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法（TGA） |
China National Standards mining |
English PDF |
| GB/T 7679.8-2015 |
mining machinery terminology—Part 8：Calcining equipment 矿山机械术语 第8部分：焙烧设备 |
China National Standards mining |
English PDF |
| GB 31336-2014 |
The norm of energy consumption per unit product of iron ore underground mining 铁矿地下开采单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB 31335-2014 |
The norm of the energy consumption per unit product of iron ore surface mining 铁矿露天开采单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB/T 31256-2014 |
Conveyor belts―Specification for rubber-or plastics-covered conveyor belts of textile construction for underground mining 输送带 具有橡胶或塑料覆盖层的地下采矿用织物芯输送带规范 |
China National Standards mining |
English PDF |
| GB/T 30820-2014 |
Nondestructive testing—Practice for determining the impedance of absolute eddy-current probes 无损检测 绝对式涡流探头阻抗测定方法 |
China National Standards mining |
English PDF |
| GB/T 18376.2-2014 |
Grades of cemented carbide―Part 2: Grades of cemented carbide for geological and mining tools 硬质合金牌号 第2部分：地质、矿山工具用硬质合金牌号 |
China National Standards mining |
English PDF |
| GB 50970-2014 |
Code for design of open-pit mining engineering in decoration stone mine 装饰石材矿山露天开采工程设计规范 |
China National Standards mining |
English PDF |
| GB/T 29998-2013 |
Benefit calculation to determine the mining and processing of low-grade ore of copper mine 铜矿山低品位矿石可采选效益计算方法 |
China National Standards mining |
English PDF |
| GB/T 29905-2013 |
Laboratory method of determining the leachability of wood preservatives 木材防腐剂流失率试验方法 |
China National Standards mining |
English PDF |
| GB/T 29896-2013 |
Method of determining the leachability of wood preservatives from treated wood in soil contact 接触土壤防腐木材的防腐剂流失率测定方法 |
China National Standards mining |
English PDF |
| GB/T 29649-2013 |
Determining the biobased content of biobased materials - Liquid scintillation counters（LSC）method 生物基材料中生物基含量测定 液闪计数器法 |
China National Standards mining |
English PDF |
| GB/T 29521-2013 |
Safety specification for underground mining of tungsten mine 钨矿山地下开采安全生产规范 |
China National Standards mining |
English PDF |
| GB 29445-2012 |
The norm of the energy consumption per unit product of coal surface mining 煤炭露天开采单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB 29444-2012 |
The norm of the energy consumption per unit product of coal underground mining 煤炭井工开采单位产品能源消耗限额 |
China National Standards mining |
English PDF |
| GB 50859-2013 |
Standard method of measurement for mining works 矿山工程工程量计算规范 |
China National Standards mining |
English PDF |
| GB/T 28753-2012 |
Determining of coalbed gas content - Heating desorption 煤层气含量测定 加温解吸法 |
China National Standards mining |
English PDF |
| GB/T 28397-2012 |
Evaluation indexes and computation of circular economy for coal mining area 煤炭矿区循环经济评价指标及计算方法 |
China National Standards mining |
English PDF |
| GB 50771-2012 |
Code for design of nonferrous metal mining 有色金属采矿设计规范 |
China National Standards mining |
English PDF |
| GB/T 27581-2011 |
Electromagnetic interference shielding Film - Electroless copper plating solution - Method of determining concentration of Ni2+ and Cu2+ 电磁屏蔽膜 化学镀铜溶液 镍离子和铜离子含量测定方法 |
China National Standards mining |
English PDF |
| GB/T 27508-2011 |
Method for determining the degree of jump and weave in 70mm、35mm and 16mm motion-picture projected images 70mm、35mm和16mm电影放映画面跳动和晃动等级测定方法 |
China National Standards mining |
English PDF |
| GB/T 26140-2010 |
Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction 无损检测 测量残余应力的中子衍射方法 |
China National Standards mining |
English PDF |
| GB/T 25962-2010 |
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions 高速条件下汽车轮毂轴承润滑脂漏失量测定法 |
China National Standards mining |
English PDF |
| GB/T 50658-2011 |
Standard for preparing design document of construction project of electromechanical equipment repair plant in mining area of coal industry 煤炭工业矿区机电设备修理厂工程建设项目设计文件编制标准 |
China National Standards mining |
English PDF |
| GB/T 50657-2011 |
Standard of drawing-making for surface mining coal 煤炭露天采矿制图标准 |
China National Standards mining |
English PDF |
| GB/T 50651-2011 |
Preparation standard for general planning on mining area of coal industry 煤炭工业矿区总体规划文件编制标准 |
China National Standards mining |
English PDF |
| GB/T 25706-2010 |
Code of designations for mining machinery products 矿山机械产品型号编制方法 |
China National Standards mining |
English PDF |
| GB 25523-2010 |
Mechanical mining shovel - Safety requirements 矿用机械正铲式挖掘机 安全要求 |
China National Standards mining |
English PDF |
| GB 25517.2-2010 |
mining machinery - Safety signs - Part 2: Symbols for hazard pictorial 矿山机械 安全标志 第2部分：危险图示符号 |
China National Standards mining |
English PDF |
| GB 25517.1-2010 |
mining machinery - Safety signs - Part 1:General principles 矿山机械 安全标志 第1部分：通则 |
China National Standards mining |
English PDF |
| GB/T 10599-2010 |
Multi-rope mining friction hoist 多绳摩擦式提升机 |
China National Standards mining |
English PDF |
| GB 25285.2-2010 |
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining 爆炸性环境 爆炸预防和防护 第2部分：矿山爆炸预防和防护的基本原则和方法 |
China National Standards mining |
English PDF |
| GB/T 25442-2010 |
Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles) 旋转电机（牵引电机除外）确定损耗和效率的试验方法 |
China National Standards mining |
English PDF |
| GB/T 12162.4-2010 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分：低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards mining |
English PDF |
| GB/T 1033.3-2010 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method 塑料 非泡沫塑料密度的测定 第3部分：气体比重瓶法 |
China National Standards mining |
English PDF |
| GB/T 1033.2-2010 |
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method 塑料 非泡沫塑料密度的测定 第2部分：密度梯度柱法 |
China National Standards mining |
English PDF |
| GB/T 23561.16-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining slake durability index of rock 煤和岩石物理力学性质测定方法 第16部分：岩石耐崩解性指数测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.15-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 15: Method for determining the swelling stress of rock 煤和岩石物理力学性质测定方法 第15部分：岩石膨胀应力测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.14-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 14: Method for determining the swelling ratio of rock 煤和岩石物理力学性质测定方法 第14部分：岩石膨胀率测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.13-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 13: Methods for determining point load strength index of coal and rock 煤和岩石物理力学性质测定方法 第13部分：煤和岩石点载荷强度指数测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.12-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 12: Method for determining coal hardiness coefficient 煤和岩石物理力学性质测定方法 第12部分：煤的坚固性系数测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.11-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 11: Methods for determining shear strength of coal and rock 煤和岩石物理力学性质测定方法 第11部分：煤和岩石抗剪强度测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.10-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 10: Methods for determining tensile strength of coal and rock 煤和岩石物理力学性质测定方法 第10部分：煤和岩石抗拉强度测定方法 |
China National Standards mining |
English PDF |
| GB 12476.9-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers 可燃性粉尘环境用电气设备 第9部分：试验方法 粉尘层电阻率的测定方法 |
China National Standards mining |
English PDF |
| GB 12476.8-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust 可燃性粉尘环境用电气设备 第8部分： 试验方法 确定粉尘最低点燃温度的方法 |
China National Standards mining |
English PDF |
| GB 12476.10-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures 可燃性粉尘环境用电气设备 第10部分：试验方法 粉尘与空气混合物最小点燃能量的测定方法 |
China National Standards mining |
English PDF |
| GB/T 50593-2010 |
Standard for drawings undarground mining 煤炭矿井制图标准 |
China National Standards mining |
English PDF |
| GB/T 50564-2010 |
mining drawing standard for metal and nonmetal mines 金属非金属矿山采矿制图标准 |
China National Standards mining |
English PDF |
| GB/T 9858-2009 |
Method for determining the folding endurance of photographic film and film base 片基与胶片耐折度的测定方法 |
China National Standards mining |
English PDF |
| GB/T 12683-2009 |
Method for determining the tensile properties of photographic film and film base 片基与胶片拉伸性能的测定方法 |
China National Standards mining |
English PDF |
| GB 50521-2009 |
Code for design of uranium mining and metallurgy engineering in nuclear industry 核工业铀矿冶工程设计规范 |
China National Standards mining |
English PDF |
| GB/T 24635.3-2009 |
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards 产品几何技术规范（GPS) 坐标测量机（CMM） 确定测量不确定度的技术 第3部分：应用已校准工件或标准件 |
China National Standards mining |
English PDF |
| GB 16413-2009 |
Inspecting specification of glass fiber reinforced plastic product safety property for coal mining 煤矿井下用玻璃钢制品安全性能检验规范 |
China National Standards mining |
English PDF |
| GB/T 1555-2009 |
Testing methods for determining the orientation of a semiconductor single crystal 半导体单晶晶向测定方法 |
China National Standards mining |
English PDF |
| GB/T 24503-2009 |
mining-Drive sprocket for chains (round link) 矿用圆环链驱动链轮 |
China National Standards mining |
English PDF |
| GB/T 12718-2009 |
High-tensile steel chains ( round link ) for mining 矿用高强度圆环链 |
China National Standards mining |
English PDF |
| GB/T 3860-2009 |
Guidelines for determining the subjects and selecting the descriptors 文献主题标引规则 |
China National Standards mining |
English PDF |
| GB 50536-2009 |
Code for design of coal mine full-mechanized mining district 煤矿综采采区设计规范 |
China National Standards mining |
English PDF |
| GB 50532-2009 |
Coal industry design code of repairing facilities for electro-mechanical equipment of mining district 煤炭工业矿区机电设备修理设施设计规范 |
China National Standards mining |
English PDF |
| GB/T 24127-2009 |
Testing method for determining algal resistance of plastics 塑料抗藻性能试验方法 |
China National Standards mining |
English PDF |
| GB/T 2910.15-2009 |
Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) 纺织品 定量化学分析 第15部分：黄麻与某些动物纤维的混合物（含氮量法） |
China National Standards mining |
English PDF |
| GB 23727-2009 |
Regulations for radiation and environment protection in uranium mining and milling 铀矿冶辐射防护和环境保护规定 |
China National Standards mining |
English PDF |
| GB/T 23561.9-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第9部分：煤和岩石三轴强度及变形参数测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.8-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第8部分：煤和岩石变形参数测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.7-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient 煤和岩石物理力学性质测定方法 第7部分：单轴抗压强度测定及软化系数计算方法 |
China National Standards mining |
English PDF |
| GB/T 23561.6-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock 煤和岩石物理力学性质测定方法 第6部分：煤和岩石含水率测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.5-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock 煤和岩石物理力学性质测定方法 第5部分：煤和岩石吸水性测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.4-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock 煤和岩石物理力学性质测定方法 第4部分：煤和岩石孔隙率计算方法 |
China National Standards mining |
English PDF |
| GB/T 23561.3-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock 煤和岩石物理力学性质测定方法 第3部分：煤和岩石块体密度测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.2-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 2: Methods for determining the true density of coal and rock 煤和岩石物理力学性质测定方法 第2部分：煤和岩石真密度测定方法 |
China National Standards mining |
English PDF |
| GB/T 23561.1-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 1: General requirements for sampling 煤和岩石物理力学性质测定方法 第1部分：采样一般规定 |
China National Standards mining |
English PDF |
| GB/T 23256-2009 |
Petroleum liquids - Automatic pipeline sampling - Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids 石油液体管线自动取样 测定石油液体中水含量的自动取样器性能的统计学评估 |
China National Standards mining |
English PDF |
| GB/T 23250-2009 |
The direct method of determining coalbed gas content in the mine 煤层瓦斯含量井下直接测定方法 |
China National Standards mining |
English PDF |
| GB/T 22689-2008 |
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges 测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法 |
China National Standards mining |
English PDF |
| GB 50465-2008 |
Code for general planning of mining area of coal industry 煤炭工业矿区总体规划规范 |
China National Standards mining |
English PDF |
| GB/T 5590-2008 |
Low voltage explosion protection electromagnetic starter for mining 矿用防爆低压电磁起动器 |
China National Standards mining |
English PDF |
| GB/T 9861-2008 |
Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion 成像材料 照相胶片和相纸 照相乳剂湿抗划伤的测量方法 |
China National Standards mining |
English PDF |
| GB/T 15663.7-2008 |
Terms relating to coal mining - Part 7: Mining subsidence & special coal mining 煤矿科技术语 第7部分：开采沉陷与特殊采煤 |
China National Standards mining |
English PDF |
| GB/T 15663.5-2008 |
Terms relating to coal mining - Part 5: Hoisting and transport 煤矿科技术语 第5部分：提升运输 |
China National Standards mining |
English PDF |
| GB/T 15663.4-2008 |
Terms relating to coal mining - Part 4: surface mining 煤矿科技术语 第4部分：露天开采 |
China National Standards mining |
English PDF |
| GB/T 15663.2-2008 |
Terms relating to coal mining - Part 2: Shafting and drifting engineering 煤矿科技术语 第2部分：井巷工程 |
China National Standards mining |
English PDF |
| GB/T 13332-2008 |
Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces 土方机械 液压挖掘机和挖掘装载机 挖掘力的测定方法 |
China National Standards mining |
English PDF |
| Find out:283Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
