Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 1243-2024 |
Short pitch precision roller chains, bushing chains, accessories and sprockets for transmission {译} 传动用短节距精密滚子链、套筒链、附件和链轮 |
China National Standards pitch |
 English PDF |
| GB/T 43536.2-2023 |
Three-dimensional integrated circuits Part 2: Calibration requirements for fine-pitch stacked chips {译} 三维集成电路 第2部分：微间距叠层芯片的校准要求 |
China National Standards pitch |
English PDF |
| GB/T 40296-2021 |
Practical superconducting wires—Twist pitch measurement method of Nb-Ti and Nb3Sn composite superconductors 实用超导线 铌-钛（Nb-Ti）与铌三锡（Nb3Sn）复合超导体的扭距测量方法 |
China National Standards pitch |
English PDF |
| GB/T 11362-2021 |
Synchronous belt drives—Calculation of power rating and drive center distance with belts pitch codes MXL,XXL,XL,L,H,XH and XXH 同步带传动 节距型号MXL，XXL，XL，L，H，XH和XXH梯形齿同步带额定功率和传动中心距计算 |
China National Standards pitch |
English PDF |
| GB/T 41000-2021 |
General requirement of polycarbonate (PC) drinking water pitcher 聚碳酸酯（PC）饮水罐质量通则 |
China National Standards pitch |
English PDF |
| GB/T 39522-2020 |
Metric series wires for the pitch diameters of screw threads 螺纹中径米制系列量针 |
China National Standards pitch |
English PDF |
| GB/T 38772-2020 |
pitch from coal liquefaction 煤液化沥青 |
China National Standards pitch |
English PDF |
| GB/T 70.6-2020 |
Hexagon socket head cap screws－Fine pitch thread 内六角圆柱头螺钉 细牙螺纹 |
China National Standards pitch |
English PDF |
| GB/T 32.3-2020 |
Hexagon bolts with wire holes on head—Fine pitch thread 六角头头部带孔螺栓 细牙 |
China National Standards pitch |
English PDF |
| GB/T 38396-2019 |
pitch products of coal carbonization—Determination of mesophase content—Microscopical analysis by reflected light 焦化沥青类产品 中间相含量的测定 光反射显微分析方法 |
China National Standards pitch |
English PDF |
| GB/T 2293-2019 |
The method of quinoline-insolube for pitch products of coal carbonization 焦化沥青类产品喹啉不溶物试验方法 |
China National Standards pitch |
English PDF |
| GB/T 2293-2019 |
The method of quinoline-insolube for pitch products of coal carbonization 焦化沥青类产品喹啉不溶物试验方法 |
China National Standards pitch |
English PDF |
| GB/T 11361-2018 |
Synchronous belt drives—Trapezoidal toothed pulleys with pitch code MXL,XXL,XL,L,H,XH and XXH 同步带传动-节距型号MXL、XXL、XL、L、H、XH和XXH梯形齿带轮 |
China National Standards pitch |
English PDF |
| GB/T 35074-2018 |
Impregnating coal pitch 焦化浸渍剂沥青 |
China National Standards pitch |
English PDF |
| GB/T 2291-2016 |
Method for preparation of coal tar pitch specimens 煤沥青实验室试样的制备方法 |
China National Standards pitch |
English PDF |
| GB/T 889.2-2016 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1—Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6187.2-2016 |
Prevailing torque type all-metal hexagon nuts with flange, style 2—Fine pitch thread 2型全金属六角法兰面锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6185.2-2016 |
Prevailing torque type all-metal hexagon nuts,style 2—Fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6183.2-2016 |
Prevailing torque type hexagon nuts with flange(with non-metallic insert), style 2—Fine pitch thread 2型非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6177.2-2016 |
Hexagon nuts with flange,style 2—Fine pitch thread 2型六角法兰面螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6176-2016 |
Hexagon nuts,style2—Fine pitch thread 2型六角螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6171-2016 |
Hexagon regular nuts（style1）with metric fine pitch thread 六角标准螺母（1型） 细牙 |
China National Standards pitch |
English PDF |
| GB/T 5786-2016 |
Hexagon head bolts—Fine pitch thread—Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards pitch |
English PDF |
| GB/T 5785-2016 |
Hexagon head bolts—Fine pitch thread 六角头螺栓 细牙 |
China National Standards pitch |
English PDF |
| GB/T 16674.2-2016 |
Hexagon bolts with flange—Fine pitch thread—Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards pitch |
English PDF |
| GB/T 6173-2015 |
Hexagon thin nuts—Fine pitch thread 六角薄螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 32077-2015 |
Wind turbine generator system pitch system 风力发电机组 变桨距系统 |
China National Standards pitch |
English PDF |
| GB/T 26930.9-2014 |
Carbonaceous materials used in the production of aluminium―pitch for electrodes―Part 9：Determination of sulful content by the bomb method 原铝生产用炭素材料 煤沥青 第9部分：氧弹燃烧法测定硫含量 |
China National Standards pitch |
English PDF |
| GB/T 26930.8-2014 |
Carbonaceous materials used in the production of aluminium—pitch for electrodes—Part 8：Determination of coking value 原铝生产用炭素材料 煤沥青 第8部分：结焦值的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.7-2014 |
Carbonaceous materials used in the production of aluminium—pitch for electrodes—Part 7：Determination of softening point(Mettler softening point method) 原铝生产用炭素材料 煤沥青 第7部分：软化点的测定（Mettler法） |
China National Standards pitch |
English PDF |
| GB/T 26930.6-2014 |
Carbonaceous materials used in the production of aluminium—pitch for electrodes—Part 6：Determination of ash 原铝生产用炭素材料 煤沥青 第6部分：灰分的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.13-2014 |
Carbonaceous materials used in the production of aluminium―pitch for electrodes―Part 13：Determination of C/H ratio in the quinoline-insoluble fraction 原铝生产用炭素材料 煤沥青 第13部分：喹啉不溶物中C/H原子比的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.12-2014 |
Carbonaceous materials used in the production of aluminium―pitch for electrodes―Part 12：Determination of volatile matter content 原铝生产用炭素材料 煤沥青 第12部分：挥发物含量的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.11-2014 |
Carbonaceous materials used in the production of aluminium―pitch for electrodes―Part 11：Determination of dynamic viscosity 原铝生产用炭素材料 煤沥青 第11部分：动态粘度的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.10-2014 |
Carbonaceous materials used in the production of aluminium―pitch for electrodes―Part 10：Determination of sulful content by an instrumental method 原铝生产用炭素材料 煤沥青 第10部分：仪器法测定硫含量 |
China National Standards pitch |
English PDF |
| GB/T 30368-2013 |
Ships and marine technology—Propeller pitch indicators 船舶和海上技术 螺旋桨螺距指示器 |
China National Standards pitch |
English PDF |
| GB/T 11616-2013 |
Synchronous belt dirves—Belts with pitch codes—MXL , XXL , XL , L , H, XH and XXH—Synchronous belt dimensions 同步带传动 节距型号MXL、XXL、XL、L、H、XH和XXH 同步带尺寸 |
China National Standards pitch |
English PDF |
| GB/T 29913.1-2013 |
Bearing steel for wind power equipment - Part 1: Yawing and variable pitch bearing steel 风力发电设备用轴承钢 第1部分：偏航、变桨轴承用钢 |
China National Standards pitch |
English PDF |
| GB/T 29717-2013 |
Rolling bearings - Wind power generators yaw and pitch bearings 滚动轴承 风力发电机组偏航、变桨轴承 |
China National Standards pitch |
English PDF |
| GB/T 2290-2012 |
Coal tar pitch 煤沥青 |
China National Standards pitch |
English PDF |
| GB/T 28775-2012 |
Synchronous belt drives - Metric pitch - Trapezoidal toothed synchronous pulleys 同步带传动 米制节距 梯形齿同步带轮 |
China National Standards pitch |
English PDF |
| GB/T 28774-2012 |
Synchronous belt drives - Metric pitch - Trapezoidal toothed synchronous belts 同步带传动 米制节距 梯形齿同步带 |
China National Standards pitch |
English PDF |
| GB/T 28272-2012 |
Metric screw threads with extra fine pitch - Series and basic dimensions 米制超细牙螺纹 系列和基本尺寸 |
China National Standards pitch |
English PDF |
| GB/T 28271-2012 |
Metric screw threads with extra fine pitch - Tolerances 米制超细牙螺纹 公差 |
China National Standards pitch |
English PDF |
| GB/T 26930.5-2011 |
Carbonaceous materials for the production of primary aluminium - pitch for electrodes - Part 5：Determination of content of toluene-insoluble material 原铝生产用炭素材料 煤沥青 第5部分：甲苯不溶物含量的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.4-2011 |
Carbonaceous materials for the production of primary aluminium - pitch for electrodes - Part 4：Determination of content of quinoline-insoluble material 原铝生产用炭素材料 煤沥青 第4部分：喹啉不溶物含量的测定 |
China National Standards pitch |
English PDF |
| GB/T 26930.3-2011 |
Carbonaceous materials for the production of primary aluminium - pitch for electrodes - Part 3：Determination of density - Pyknometric method 原铝生产用炭素材料 煤沥青 第3部分：密度的测定 比重瓶法 |
China National Standards pitch |
English PDF |
| GB/T 26930.2-2011 |
Carbonaceous materials for the production of primary aluminium - pitch for electrodes - Part 2：Determination of softening point by the ring and ball method 原铝生产用炭素材料 煤沥青 第2部分：软化点的测定 环球法 |
China National Standards pitch |
English PDF |
| GB/T 26930.1-2011 |
Carbonaceous materials for the production of primary aluminium - pitch for electrodes - Part 1：Determination of water content - Azeotropic distillation(Dean and Stark) method 原铝生产用炭素材料 煤沥青 第1部分：水分含量的测定 共沸蒸馏法 |
China National Standards pitch |
English PDF |
| GB/T 26297.5-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 5: pitch for electrodes 铝用炭素材料取样方法 第5部分：煤沥青 |
China National Standards pitch |
English PDF |
| GB/T 902.4-2010 |
Threaded studs with flange （pitch）and stud with internal thread for short-cycle drawn arc stud welding 短周期电弧螺柱焊用焊接螺柱 |
China National Standards pitch |
English PDF |
| GB/T 26090-2010 |
Gear circular pitch measuring instrument 齿轮齿距测量仪 |
China National Standards pitch |
English PDF |
| GB/T 24348.1-2009 |
Textile machinery and accessories - Reeds - Part 1: Dimensions and designation of pitch bound reeds 纺织机械与附件 筘 第1部分：胶粘线扎筘的尺寸和标记 |
China National Standards pitch |
English PDF |
| GB/T 8727-2008 |
Method for determination of coking value of coal pitch products 煤沥青类产品结焦值的测定方法 |
China National Standards pitch |
English PDF |
| GB/T 5269-2008 |
Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors 传动与输送用双节距精密滚子链、附件和链轮 |
China National Standards pitch |
English PDF |
| GB/T 14316-2008 |
PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacement termination 间距1.27mm绝缘刺破型端接式聚氯乙烯绝缘带状电缆 |
China National Standards pitch |
English PDF |
| GB/T 2293-2008 |
pitch products of coal carbonization - Determination of quinoline-insoluble 焦化沥青类产品喹啉不溶物试验方法 |
China National Standards pitch |
English PDF |
| GB/T 21479.2-2008 |
Ships and marine technology-Propulsion plants for ships - Part 2:Vocabulary for controllable-pitch propeller plants 船舶与海上技术 船用推进装置 第2部分: 可调螺距螺旋桨装置词汇 |
China National Standards pitch |
English PDF |
| GB/T 1243-2006 |
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets 传动用短节距精密滚子链、套筒链、附件和链轮 |
China National Standards pitch |
English PDF |
| GB/T 16674.2-2004 |
Hexagon bolts with flange with metric fine pitch thread--Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards pitch |
English PDF |
| GB/T 8458-2003 |
Textile machinery and accessories--pitches of knitting machine needles 纺织机械与附件 针织机针距 |
China National Standards pitch |
English PDF |
| GB/T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert)，style 1，with fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread 全金属六角法兰面锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts，style 2，with fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6183.2-2000 |
Prevailing torque type hexagon nutswith flange(with non-metallic insert) with fine pitch thread 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6177.2-2000 |
Hexagon nuts with flange--Fine pitch thread 六角法兰面螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6176-2000 |
Hexagon nuts，style 2，with fine pitch thread 2型六角螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 6171-2000 |
Hexagon nuts，style 1，with fine pitch thread 1型六角螺母 细牙 |
China National Standards pitch |
English PDF |
| GB/T 5786-2000 |
Hexagon head bolts with fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards pitch |
English PDF |
| GB/T 5785-2000 |
Hexagon head bolts with fine pitch thread 六角头螺栓 细牙 |
China National Standards pitch |
English PDF |
| GB/T 3098.4-2000 |
Mechanical properties of fasteners--Nuts--Fine pitch thread 紧固件机械性能 螺母 细牙螺纹 |
China National Standards pitch |
English PDF |
| GB/T 17516.2-1998 |
V-and ribbed belts drive--Dynamic test to determine pitch zone location--Part 2:V-ribbedbelts V带和多楔带传动 测定节面位置的动态试验方法 第2部分:多楔带 |
China National Standards pitch |
English PDF |
| GB/T 17516.1-1998 |
V-and ribbedbelts drive--Dynamic test to determine pitch zone location--Part 1:V-belts V带和多楔带传动 测定节面位置的动态试验方法 第1部分:V带 |
China National Standards pitch |
English PDF |
| GB/T 15828-1995 |
V-and ribbed belt--Dynamic test to determine--pitch zone location V带和多楔带传动 节线位置的动态测定 |
China National Standards pitch |
English PDF |
| GB/T 13411-1992 |
Technical requirements for marine controllable pitch propellers 船用可调螺距螺旋桨技术条件 |
China National Standards pitch |
English PDF |
| GB/T 2363-1990 |
Accuracy of fine-pitch involute cylindrical gears 小模数渐开线圆柱齿轮精度 |
China National Standards pitch |
English PDF |
| GB/T 2362-1990 |
Basic rack tooth profile of fine-pitch involute cylindrical gears 小模数渐开线圆柱齿轮基本齿廓 |
China National Standards pitch |
English PDF |
| GB/T 10227-1988 |
Accuracy of fine-pitch cylindrical worm and wormwheel 小模数圆柱蜗杆、蜗轮精度 |
China National Standards pitch |
English PDF |
| GB/T 10226-1988 |
Basic rack tooth profile of fine-pitch cylindrical worm 小模数圆柱蜗杆基本齿廓 |
China National Standards pitch |
English PDF |
| GB/T 10225-1988 |
Accuracy of fine-pitch bevel gears 小模数锥齿轮精度 |
China National Standards pitch |
English PDF |
| GB/T 10224-1988 |
Basic rack tooth profile of fine-pitch bevel gears 小模数锥齿轮基本齿廓 |
China National Standards pitch |
English PDF |
| GB/T 9459-1988 |
Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B 六角开槽薄螺母 细牙 A和B级 |
China National Standards pitch |
English PDF |
| GB/T 9458-1988 |
Hexagon slotted and castle nuts，style 2--Fine pitch thread--Product grades A and B 2 型六角开槽螺母 细牙 A和B级 |
China National Standards pitch |
English PDF |
| GB/T 9457-1988 |
Hexagon slotted and castle nuts，style l--Fine pitch thread--Product grades A and B 1 型六角开槽螺母 细牙 A和B级 |
China National Standards pitch |
English PDF |
| GB/T 808-1988 |
Small hexagon thin nuts--Fine pitch thread 小六角特扁细牙螺母 |
China National Standards pitch |
English PDF |
| GB/T 32.3-1988 |
Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B 六角头头部带孔螺栓 细牙 A和B级 |
China National Standards pitch |
English PDF |
| GB/T 31.3-1988 |
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B 六角头螺杆带孔螺栓 细牙 A和B级 |
China National Standards pitch |
English PDF |
| GB/T 2291-1980 |
Method for preparation of coal tar pitchs specimens 煤沥青试验室试样的制备方法 |
China National Standards pitch |
English PDF |
| Find out:88Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
