Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43863-2024 |
Large-scale integrated circuits (LSI)-Package-printed Circuit Board Common Design Structure {译} 大规模集成电路（LSI）-封装-印制电路板共通设计结构 |
China National Standards printed |
 English PDF |
| GB/T 15651.7-2024 |
printed board assembly - Part 6: Evaluation requirements for voids in ball grid array (BGA) and land grid array (LGA) solder joints and test methods {译} 半导体器件-第5-7部分：光电子器件-光电二极管和光电晶体管 |
China National Standards printed |
English PDF |
| GB/T 43799-2024 |
Sectional specification for high-density interconnect printed boards {译} 高密度互连印制板分规范 |
China National Standards printed |
English PDF |
| GB/T 43059-2023 |
Flatness control requirements for printed boards and printed board assemblies {译} 印制板及印制板组装件的平整度控制要求 |
China National Standards printed |
English PDF |
| GB/T 4725-2022 |
Epoxide woven glass fabric copper-clad laminated sheets for printed circuits 印制电路用覆铜箔环氧玻纤布层压板 |
China National Standards printed |
English PDF |
| GB/T 4721-2021 |
General rules for rigid copper clad laminates for printed circuits 印制电路用刚性覆铜箔层压板通用规则 |
China National Standards printed |
English PDF |
| GB/T 5230-2020 |
Electrodeposited copper foil for printed board 印制板用电解铜箔 |
China National Standards printed |
English PDF |
| GB/T 39342-2020 |
Aerospace electronic products—General specification for printed circuit board 宇航电子产品 印制电路板总规范 |
China National Standards printed |
English PDF |
| GB/T 38342-2019 |
Aerospace electronic product—Assembling requirements of printed circuit board assembly 宇航电子产品 印制板组装件组装要求 |
China National Standards printed |
English PDF |
| GB/T 17760-2019 |
Inspection method for printed or dyed fabric surface defects 印染布布面疵点检验方法 |
China National Standards printed |
English PDF |
| GB/T 14515-2019 |
Sectional specification for single and double sided flexible printed board 单、双面挠性印制板分规范 |
China National Standards printed |
English PDF |
| GB/T 37232-2018 |
Specification for forensic examination of printed document 印刷文件鉴定技术规范 |
China National Standards printed |
English PDF |
| GB/T 36476-2018 |
General specification for metal base copper-clad laminates for printed circuits 印制电路用金属基覆铜箔层压板通用规范 |
China National Standards printed |
English PDF |
| GB/T 36504-2018 |
Guide for the analysis of the printed circuit board surface contamination—Auger electron spectroscopy 印刷线路板表面污染物分析 俄歇电子能谱 |
China National Standards printed |
English PDF |
| GB/T 5489-2018 |
printed circuit board draw 印制板制图 |
China National Standards printed |
English PDF |
| GB/T 34053.1-2017 |
Specifications of quality inspection for printed paper products—Part 1: Terms 纸质印刷产品印制质量检验规范 第1部分：术语 |
China National Standards printed |
English PDF |
| GB/T 4588.4-2017 |
Sectional specification for rigid multilayer printed boards 刚性多层印制板分规范 |
China National Standards printed |
English PDF |
| GB/T 16315-2017 |
Polymide woven glass fabric copper clad laminated sheets for printed circuits 印制电路用覆铜箔聚酰亚胺玻纤布层压板 |
China National Standards printed |
English PDF |
| GB/T 4724-2017 |
Composite base copper clad laminated sheets for printed circuits 印制电路用覆铜箔复合基层压板 |
China National Standards printed |
English PDF |
| GB/T 4723-2017 |
Phenolic celluloss paper copper clad laminated sheets for printed circuit 印制电路用覆铜箔酚醛纸层压板 |
China National Standards printed |
English PDF |
| GB/T 13557-2017 |
Test methods for copper-clad material for flexible printed circuits 印制电路用挠性覆铜箔材料试验方法 |
China National Standards printed |
English PDF |
| GB/T 12631-2017 |
Test method for resistance of conductors of printed boards 印制板导线电阻测试方法 |
China National Standards printed |
English PDF |
| GB/T 4722-2017 |
Test methods for rigid copper clad laminates for printed circuits board 印制电路用刚性覆铜箔层压板试验方法 |
China National Standards printed |
English PDF |
| GB/T 16261-2017 |
General specification for printed circuit boards 印制板总规范 |
China National Standards printed |
English PDF |
| GB/T 33772.1-2017 |
Quality assessment systems—Part 1: Registration and analysis of defects on printed board assemblies 质量评定体系 第1部分：印制板组件上缺陷的统计和分析 |
China National Standards printed |
English PDF |
| GB/T 13556-2017 |
Copper-clad polyester film laminates for flexible printed circuits 挠性印制电路用聚酯薄膜覆铜板 |
China National Standards printed |
English PDF |
| GB/T 13555-2017 |
Copper-clad polyimide film laminates for flexible printed circuits 挠性印制电路用聚酰亚胺薄膜覆铜板 |
China National Standards printed |
English PDF |
| GB/T 34053.5-2017 |
Specifications of quality inspection for printed paper products—Part 5: Newspaper 纸质印刷产品印制质量检验规范 第5部分：报纸 |
China National Standards printed |
English PDF |
| GB/T 34053.4-2017 |
Specifications of quality inspection for printed paper products—Part 4: Primary and secondary school textbooks 纸质印刷产品印制质量检验规范 第4部分：中小学教科书 |
China National Standards printed |
English PDF |
| GB/T 14708-2017 |
Adhesive coated polyester film for flexible printed circuits 挠性印制电路用涂胶聚酯薄膜 |
China National Standards printed |
English PDF |
| GB/T 34053.3-2017 |
Specifications of quality inspection for printed paper products—Part 3: Books and periodicals 纸质印刷产品印制质量检验规范 第3部分：图书期刊 |
China National Standards printed |
English PDF |
| GB/T 14709-2017 |
Adhesive coated polyimide film for flexible printed circuits 挠性印制电路用涂胶聚酰亚胺薄膜 |
China National Standards printed |
English PDF |
| GB/T 34053.2-2017 |
Specifications of quality inspection for printed paper products—Part 2: Sampling and judging rules 纸质印刷产品印制质量检验规范 第2部分：抽样判定规则 |
China National Standards printed |
English PDF |
| GB/T 411-2017 |
printed and dyed cotton fabric 棉印染布 |
China National Standards printed |
English PDF |
| GB/T 14311-2017 |
Corduroy printed and dyed cotton fabric 灯芯绒棉印染布 |
China National Standards printed |
English PDF |
| GB/T 34919-2017 |
Code of practice for examination of printed documents in forensics 法庭科学打印文件检验技术规程 |
China National Standards printed |
English PDF |
| GB/T 34053.6-2017 |
Specifications of quality inspection for printed paper products—Part 6: Folding carton 纸质印刷产品印制质量检验规范 第6部分：折叠纸盒 |
China National Standards printed |
English PDF |
| GB/T 33016-2016 |
Test methods for bongding sheet for multilayer printed boards 多层印制板用粘结片试验方法 |
China National Standards printed |
English PDF |
| GB/T 33015-2016 |
General rules for bonding sheet for multilayer printed boards 多层印制板用粘结片通用规则 |
China National Standards printed |
English PDF |
| GB/T 15157.2-2015 |
Connectors for frequencies below 3 MHz for use with printed boards—Part 2：Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm with common mounting features 印制板用频率低于3 MHz的连接器 第2部分：有质量评定的具有通用安装特征基本网格2.54 mm的印制板用两件式连接器详细规范 |
China National Standards printed |
English PDF |
| GB/T 31988-2015 |
Aluminium base copper clad laminate for printed circuits 印制电路用铝基覆铜箔层压板 |
China National Standards printed |
English PDF |
| GB 51127-2015 |
Code for design of printed circuit board plant 印制电路板工厂设计规范 |
China National Standards printed |
English PDF |
| GB/T 31471-2015 |
General specification for metal foil for printed circuits 印制电路用金属箔通用规范 |
China National Standards printed |
English PDF |
| GB/T 18373-2013 |
E-glass fabric woven for printed boards 印制板用E玻璃纤维布 |
China National Standards printed |
English PDF |
| GB/T 29847-2013 |
Test methods for copper foil used for printed boards 印制板用铜箔试验方法 |
China National Standards printed |
English PDF |
| GB/T 29846-2013 |
Photoimageable plating and etching resist paste of printed circuit board 印制板用光成像耐电镀抗蚀剂 |
China National Standards printed |
English PDF |
| GB/T 28248-2012 |
Cemented carbide drills for printed boards 印制板用硬质合金钻头 |
China National Standards printed |
English PDF |
| GB/T 15157.12-2011 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits 频率低于3MHz的印制板连接器 第12部分：集成电路插座的尺寸、一般要求和试验方法详细规范 |
China National Standards printed |
English PDF |
| GB/T 20633.3-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3：Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace(Class 3) 承载印制电路板用涂料(敷形涂料) 第3部分：一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料 |
China National Standards printed |
English PDF |
| GB/T 20633.2-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 2：Methods of test 承载印制电路板用涂料(敷形涂料) 第2部分：试验方法 |
China National Standards printed |
English PDF |
| GB/T 17961-2010 |
Requirements and test methods for printed Chinese character recognition system 印刷体汉字识别系统要求与测试方法 |
China National Standards printed |
English PDF |
| GB/T 25250-2010 |
Imaging materials - Colour images on paper prints - Determination of indoor water resistance of printed colour images 成像材料 纸质照片上的彩色影像 打印彩色影像室内耐水性测定 |
China National Standards printed |
English PDF |
| GB/T 420-2009 |
Textiles - Tests for colour fastness - Colour fastness to wet scrubbing of pigment printed textiles 纺织品 色牢度试验 颜料印染纺织品耐刷洗色牢度 |
China National Standards printed |
English PDF |
| GB/T 5326-2009 |
Combed printed or dyed polyester/cotton blended fabrics 精梳涤棉混纺印染布 |
China National Standards printed |
English PDF |
| GB/T 17760-2009 |
Method of inspection for printed or dyed fabric surface defects 印染布布面疵点检验方法 |
China National Standards printed |
English PDF |
| GB/T 14311-2008 |
printed and dyed cotton corduroy 棉印染灯芯绒 |
China National Standards printed |
English PDF |
| GB/T 411-2008 |
printed and dyed cotton fabric 棉印染布 |
China National Standards printed |
English PDF |
| GB/T 15157.14-2007 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards printed |
English PDF |
| GB/T 20633.1-2006 |
Coatings for loaded printed wire boards(conformal coating）- Part 1: Definitions,classification and general requirements 承载印制电路板用涂料（敷形涂料）第1部分：定义、分类和一般要求 |
China National Standards printed |
English PDF |
| GB/T 17695-2006 |
Public information graphical signs for use on printed matter 印刷品用公共信息图形标志 |
China National Standards printed |
English PDF |
| GB/T 19247.4-2003 |
printed board assemblies--Part 4:Sectional specification--Requirements for terminal soldered assemblies 印制板组装 第4部分:分规范 引出端焊接组装的要求 |
China National Standards printed |
English PDF |
| GB/T 19247.3-2003 |
printed board assemblies--Part 3:Sectional specification--Requirements for through-hole mount soldered assemblies 印制板组装 第3部分:分规范 通孔安装焊接组装的要求 |
China National Standards printed |
English PDF |
| GB/T 19247.2-2003 |
printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies 印制板组装 第2部分: 分规范 表面安装焊接组装的要求 |
China National Standards printed |
English PDF |
| GB/T 19247.1-2003 |
printed board assemblies--Part 1: Generic specification--Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies 印制板组装 第1部分:通用规范 采用表面安装和相关组装技术的电子和电气焊接组装的要求 |
China National Standards printed |
English PDF |
| GB/T 18995-2003 |
Cinematography--Manufacturer-printed，latent image identification on 16mm，35mm and 65mm motion-picture film--Specifications and dimensions 电影摄影术 在16mm、35mm和65mm电影胶片上由制造厂印制的潜影标识 规范和尺寸 |
China National Standards printed |
English PDF |
| GB/T 15157.7-2002 |
Connectors for frequencies below 3MHz for use with printed boards--Part 7:Detail specification for connectors，8-way，including fixed and free connectors with common mating features，with assessed quality 频率低于3 MHz的印制板连接器 第7部分:有质量评定的具有通用插合特性的8位固定和自由连接器详细规范 |
China National Standards printed |
English PDF |
| GB/T 4677-2002 |
Test methods of printed boards 印制板测试方法 |
China National Standards printed |
English PDF |
| GB/T 4588.3-2002 |
Design and use of printed boards 印制板的设计和使用 |
China National Standards printed |
English PDF |
| GB/T 1913.2-2002 |
Bleached pulp paper for printed boards 印制板用漂白木浆纸 |
China National Standards printed |
English PDF |
| GB/T 18335-2001 |
Specification for flex-rigid multilayer printed boards with through connections 有贯穿连接的刚挠多层印制板规范 |
China National Standards printed |
English PDF |
| GB/T 18334-2001 |
Specification for flexible multilayer printed boards with through conections 有贯穿连接的挠性多层印制板规范 |
China National Standards printed |
English PDF |
| GB/T 4588.12-2000 |
Specification for mass laminationpanels (semi-manufactured multilayer printed boards) 预制内层层压板规范(半制成多层印制板) |
China National Standards printed |
English PDF |
| GB/T 15157.2-1998 |
Connectors for frequencies below 3MHz for use with printed boards--Part 2:Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm(0.1in) with commonmounting features 印制板用频率低于3 MHz的连接器 第2部分:有质量评定的具有通用安装特征 基本网格2.54 mm(0.1in)的印制板用两件式连接器详细规范 |
China National Standards printed |
English PDF |
| GB/T 1360-1998 |
Grid systems for printed circuits 印制电路网格体系 |
China National Standards printed |
English PDF |
| GB/T 14006.2-1997 |
Outline dimemsions of transformers and inductors for use in telecommunication and electronic equipmemt--Part 2:Transformers and inductors using YEx-2 laminations for printed wiring boardmounting 通信和电子设备用变压器和电感器外形尺寸 第2部分:采用YEx-2系列铁心片印制板安装式变压器和电感器 |
China National Standards printed |
English PDF |
| GB/T 148-1997 |
Writing paper and certain classes of printed matter--Trimmed sizes--A and B series 印刷、书写和绘图纸幅面尺寸 |
China National Standards printed |
English PDF |
| GB/T 147-1997 |
Writing paper and certain classes printed matter--Untrimmed sizes 印刷、书写和绘图用原纸尺寸 |
China National Standards printed |
English PDF |
| GB/T 4588.4-1996 |
Sectional specification--Multilayer printed boards 多层印制板 分规范 |
China National Standards printed |
English PDF |
| GB/T 16317-1996 |
Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 多层印制电路用限定燃烧性的薄覆铜箔聚酰亚胺玻璃布层压板 |
China National Standards printed |
English PDF |
| GB/T 16315-1996 |
Polyimide woven glass fabric copper-clad laminated sheet of defined flammability for printed circuits 印制电路用限定燃烧性的覆铜箔聚酰亚胺玻璃布层压板 |
China National Standards printed |
English PDF |
| GB/T 4588.2-1996 |
Sectional specification:single and doublesided printed boards with plated-through holes 有金属化孔单双面印制板分规范 |
China National Standards printed |
English PDF |
| GB/T 4588.1-1996 |
Sectional specification:single and doublesided printed boards with plain holes 无金属化孔单双面印制板分规范 |
China National Standards printed |
English PDF |
| GB/T 16261-1996 |
Generic specification of printed boards 印制板总规范 |
China National Standards printed |
English PDF |
| GB/T 4588.10-1995 |
printed boards--Part 10:Specification for flex-rigid double-sided printed boards with through connections 印制板 第10部分:有贯穿连接的刚挠双面印制板规范 |
China National Standards printed |
English PDF |
| GB/T 15693-1995 |
Standard for price index of printed document 印刷型文献价格指数标准 |
China National Standards printed |
English PDF |
| GB/T 2036-1994 |
Terms for printed circuits 印制电路术语 |
China National Standards printed |
English PDF |
| GB/T 15157-1994 |
Connectors for frequencies below 3MHz for use with printed boards--Part l:Generic specification--Gen-eral requirements and guide for the preparation of detail specifications， with assessedquality 印制板用频率低于3 MHz的连接器 第1 部分:总规范 一般要求和编制有质量评定的详细规范的导则 |
China National Standards printed |
English PDF |
| GB/T 14709-1993 |
Adhesive coated polyimide film for flexible printed circuits 挠性印制电路用涂胶聚酰亚胺薄膜 |
China National Standards printed |
English PDF |
| GB/T 14708-1993 |
Adhesive coated polyester film for flexibleprinted circuits 挠性印制电路用涂胶聚酯薄膜 |
China National Standards printed |
English PDF |
| GB/T 14516-1993 |
Specification for single and double sided flexible printed boards without through connections 无贯穿连接的单、双面挠性印制板技术条件 |
China National Standards printed |
English PDF |
| GB/T 14515-1993 |
Specification for single and double sided flexible printed boards with through connections 有贯穿连接的单、双面挠性印制板技术条件 |
China National Standards printed |
English PDF |
| GB/T 4725-1992 |
Epoxide woven glass fabric copper-clad laminated sheets for printed circuits 印制电路用覆铜箔环氧玻璃布层压板 |
China National Standards printed |
English PDF |
| GB/T 4724-1992 |
Epoxide cellulose paper copper-clad laminated sheets for printed circuits 印制电路用覆铜箔环氧纸层压板 |
China National Standards printed |
English PDF |
| GB/T 4723-1992 |
Phenolic cellulose paper copper-clad laminated sheets for printed circuits 印制电路用覆铜箔酚醛纸层压板 |
China National Standards printed |
English PDF |
| GB/T 4722-1992 |
Test methods for copper-clad laminatedsheets for printed circuits 印制电路用覆铜箔层压板试验方法 |
China National Standards printed |
English PDF |
| GB/T 4721-1992 |
General rules for copper-clad laminated sheets for printed circuits 印制电路用覆铜箔层压板通用规则 |
China National Standards printed |
English PDF |
| GB/T 13557-1992 |
Test methods for flexible copper-clad material for printed circuits 印制电路用挠性覆铜箔材料试验方法 |
China National Standards printed |
English PDF |
| GB/T 13556-1992 |
Flexible copper-clad polyester film for printed circuits 印制电路用挠性覆铜箔聚脂薄膜 |
China National Standards printed |
English PDF |
| GB/T 13555-1992 |
Flexible copper-clad polyimide film for printed circuits 印制电路用挠性覆铜箔聚酰亚胺薄膜 |
China National Standards printed |
English PDF |
| GB/T 12631-1990 |
Test method for resistance of conductor of printed boards 印制导线电阻测试方法 |
China National Standards printed |
English PDF |
| GB/T 12630-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet， general purpose grade， for use in the fabrication of multilayer printed boards 一般用途的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards printed |
English PDF |
| GB/T 12629-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards 限定燃烧性的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards printed |
English PDF |
| GB/T 12559-1990 |
The patternes series for artwork master of printed circuits 印制电路用照相底图图形系列 |
China National Standards printed |
English PDF |
| GB/T 12508-1990 |
Alphanumeric character sets for optical recognition--Part 2:Character set OCR-B--Shapes and dimensions of the printed image 光学识别用字母数字字符集 第二部分:OCR-B 字符集印刷图象的形状和尺寸 |
China National Standards printed |
English PDF |
| GB/T 12053-1989 |
Alphanumeric character sets for optical recognition--Part 1:Character set OCR-A--Shapes and dimensions of the printed image 光学识别用字母数字字符集 第一部分:OCR-A 字符集印刷图象的形状和尺寸 |
China National Standards printed |
English PDF |
| GB/T 9311-1988 |
Adding machines and calculating machines--Keytop and printed or displayed symbols 加法器和计算器 键顶、打印或显示符号 |
China National Standards printed |
English PDF |
| GB/T 5489-1985 |
printed board drawing 印制板制图 |
China National Standards printed |
English PDF |
| Find out:107Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
