China roughness GB Standards List

China "roughness" GB Standards List:

Standard Code	Standard Title	Standard Class	Order
GB/T 42671-2023	Test method for surface roughness of carbon materials {译} 炭素材料表面粗糙度试验方法	China National Standards roughness	English PDF
GB/T 2523-2022	Method for measuring surface roughness, peak number and waviness of cold-rolled metal sheet and strip {译} 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法	China National Standards roughness	English PDF
GB/T 40389-2021	Sintered metal materials, excluding hardmetals—Measurement of surface roughness 烧结金属材料（不包括硬质合金）表面粗糙度的测定	China National Standards roughness	English PDF
GB/T 39741.2-2021	Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars 滑动轴承公差第2部分：轴和止推轴肩的几何公差及表面粗糙度	China National Standards roughness	English PDF
GB/T 11357-2020	Quality, roughness and balance of transmission pulleys 带轮的材质、表面粗糙度及平衡	China National Standards roughness	English PDF
GB/T 6060.1-2018	Surface roughness comparison specimen—Part 1: Casting surface 表面粗糙度比较样块第1部分：铸造表面	China National Standards roughness	English PDF
GB/T 15056-2017	Casting surface roughness—Appraising method 铸造表面粗糙度评定方法	China National Standards roughness	English PDF
GB/T 32642-2016	Flat panel displays glass substrate surface roughness measurement method 平板显示器基板玻璃表面粗糙度的测量方法	China National Standards roughness	English PDF
GB/T 32189-2015	Test method for surface roughness of GaN single crystal substrate by atomic force microscope 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法	China National Standards roughness	English PDF
GB/T 31227-2014	Test method for the surface roughness by atomic force microscope for sputtered thin films 原子力显微镜测量溅射薄膜表面粗糙度的方法	China National Standards roughness	English PDF
GB/T 31226-2014	Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法	China National Standards roughness	English PDF
GB/T 31199-2014	Surface roughness parameters measurement for CTP plate substrate 计算机直接制版版基（CTP版基) 表面粗糙度参数的测定	China National Standards roughness	English PDF
GB/T 30860-2014	Test methods for surface roughness and saw mark of silicon wafers for solar cells 太阳能电池用硅片表面粗糙度及切割线痕测试方法	China National Standards roughness	English PDF
GB/T 13288.4-2013	Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法触针法	China National Standards roughness	English PDF
GB/T 29505-2013	Test method for measuring surface roughness on planar surfaces of silicon wafer 硅片平坦表面的表面粗糙度测量方法	China National Standards roughness	English PDF
GB/T 13288.2-2011	Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法比较样块法	China National Standards roughness	English PDF
GB/T 14495-2009	Geometrical product specifications(GPS) - Surface texture: Profile method - roughness comparison specimens for wooden pieces 产品几何技术规范（GPS) 表面结构轮廓法木制件表面粗糙度比较样块	China National Standards roughness	English PDF
GB/T 1031-2009	Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范（GPS) 表面结构轮廓法表面粗糙度参数及其数值	China National Standards roughness	English PDF
GB/T 13288.5-2009	Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第5部分：表面粗糙度的测定方法复制带法	China National Standards roughness	English PDF
GB/T 13288.3-2009	Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法显微镜调焦法	China National Standards roughness	English PDF
GB/T 22881-2008	Paper and board - Determination of roughness/smoothness(air leak methods) - General method 纸和纸板粗糙度（平滑度）的测定（空气泄漏法）通用方法	China National Standards roughness	English PDF
GB/T 2523-2008	Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip) 冷轧金属薄板（带）表面粗糙度和峰值数的测量方法	China National Standards roughness	English PDF
GB/T 22363-2008	Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method 纸和纸板粗糙度的测定(空气泄漏法）本特生法和印刷表面法	China National Standards roughness	English PDF
GB/T 11357-2008	Quality, roughness and balance of transmission pulleys 带轮的材质、表面粗糙度及平衡	China National Standards roughness	English PDF
GB/T 13288.1-2008	Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义	China National Standards roughness	English PDF
GB/T 6060.3-2008	Surface roughness comparison specimen － Part 3：Spark-eroded，shot-blasted，grit-blasted，lapped，filed and polished surface 表面粗糙度比较样块第3部分：电火花、抛（喷）丸、喷砂、研磨、锉、抛光加工表面	China National Standards roughness	English PDF
GB/T 6060.2-2006	roughness comparison specimens - Ground, turned, bored, milled, shaped and planed 表面粗糙度比较样块磨、车、镗、铣、插及刨加工表面	China National Standards roughness	English PDF
GB/T 7220-2004	Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构轮廓法表面粗糙度术语参数测量	China National Standards roughness	English PDF
GB/T 12472-2003	Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their values for wooden pieces 产品几何量技术规范(GPS) 表面结构轮廓法木制件表面粗糙度参数及其数值	China National Standards roughness	English PDF
GB/T 6060.1-1997	roughness comparison specimens--Cast surfaces 表面粗糙度比较样块铸造表面	China National Standards roughness	English PDF
GB/T 15056-1994	Evaluation method on cast surface roughness 铸造表面粗糙度评定方法	China National Standards roughness	English PDF
GB/T 14234-1993	Surface roughness for plastic parts 塑料件表面粗糙度	China National Standards roughness	English PDF
GB/T 13841-1992	Surface roughness for electronic ceramic parts 电子陶瓷件表面粗糙度	China National Standards roughness	English PDF
GB/T 12767-1991	Powder metallurgy products--Surface roughness--Parameters and their values 粉末冶金制品表面粗糙度参数及其数值	China National Standards roughness	English PDF

Find out:34Items | To Page of: First -Previous-Next -Last | 1

- Since 2001 -
Focus on China Standards & Compliance Services

www.gbstandards.org
China National Standards