Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 44074-2024 |
Low-voltage switchgear and control equipment and complete sets of equipment-environmental factors {译} 低压开关设备和控制设备及其成套设备-环境因素 |
China National Standards sets |
 English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards sets |
English PDF |
| GB/T 44021.3-2024 |
Audio, video and related equipment - Power consumption measurement - Part 3: Television sets {译} 音视频及相关设备-功耗测量-第3部分：电视机 |
China National Standards sets |
English PDF |
| GB/T 43683.2-2024 |
Installation procedures and tolerance guidelines for hydro-generator sets - Part 2: Vertical generators {译} 水轮发电机组安装程序与公差导则-第2部分：立式发电机 |
China National Standards sets |
English PDF |
| GB/T 43683.1-2024 |
Installation procedures and tolerance guidelines for hydro-generator sets - Part 1: General {译} 水轮发电机组安装程序与公差导则-第1部分：总则 |
China National Standards sets |
English PDF |
| GB/Z 43533-2023 |
Integration of internal arc fault suppression systems in complete sets of power switches and control equipment (PSC complete sets) according to GB/T 7251.2-2023 {译} 依据GB/T 7251.2—2023的成套电力开关和控制设备（PSC成套设备）中内部电弧故障抑制系统的集成 |
China National Standards sets |
English PDF |
| GB/T 8564-2023 |
Technical Specifications for Installation of Hydrogenerator sets {译} 水轮发电机组安装技术规范 |
China National Standards sets |
English PDF |
| GB/Z 43029-2023 |
Low-voltage switchgear and control equipment and their complete sets Energy efficiency {译} 低压开关设备和控制设备及其成套设备 能效 |
China National Standards sets |
English PDF |
| GB/T 7251.2-2023 |
Low voltage switchgear and control equipment complete sets Part 2: Power switchgear and control equipment complete sets {译} 低压成套开关设备和控制设备 第2部分：成套电力开关和控制设备 |
China National Standards sets |
English PDF |
| GB/T 7251.1-2023 |
Low-voltage switchgear and controlgear complete sets Part 1: General provisions {译} 低压成套开关设备和控制设备 第1部分：总则 |
China National Standards sets |
English PDF |
| GB/T 41333-2022 |
Technical requirements for complete sets of equipment for lime calcination {译} 石灰煅烧成套装备技术要求 |
China National Standards sets |
English PDF |
| GB/Z 17215.669-2022 |
Electrical measurement data exchange - DLMS/COSEM components - Part 69: Mapping between common information model message sets (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols {译} 电测量数据交换 DLMS/COSEM组件 第69部分：公共信息模型消息集（IEC 61968-9）与DLMS/COSEM（IEC 62056）数据模型和协议间的映射 |
China National Standards sets |
English PDF |
| GB/T 2820.8-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets {译} 往复式内燃机驱动的交流发电机组 第8部分：对小功率发电机组的要求和试验 |
China National Standards sets |
English PDF |
| GB/T 2820.1-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 1: Purpose, rating and performance {译} 往复式内燃机驱动的交流发电机组 第1部分：用途、定额和性能 |
China National Standards sets |
English PDF |
| GB/T 14885-2022 |
Basic classification and code of assets such as fixed assets {译} 固定资产等资产基础分类与代码 |
China National Standards sets |
English PDF |
| GB/T 40471-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of sheep and goat slaughtering equipment 畜禽屠宰加工设备 羊屠宰成套设备技术条件 |
China National Standards sets |
English PDF |
| GB/T 40470-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of poultry slaughtering equipment 畜禽屠宰加工设备 禽屠宰成套设备技术条件 |
China National Standards sets |
English PDF |
| GB/T 40469-2021 |
Livestock and poultry slaughtering and processing equipment—Technical conditions for complete sets of cattle slaughtering equipment 畜禽屠宰加工设备 牛屠宰成套设备技术条件 |
China National Standards sets |
English PDF |
| GB/T 40058-2021 |
Coding specification for the national fixed assets investment projects 全国固定资产投资项目代码编码规范 |
China National Standards sets |
English PDF |
| GB/T 41148-2021 |
General requirements for gas fuel generating sets 气体燃料发电机组通用技术条件 |
China National Standards sets |
English PDF |
| GB/T 40888-2021 |
Aids for ostomy and incontinence—Irrigation sets—Requirements and test methods 造口和失禁辅助器具 灌洗装置 要求和试验方法 |
China National Standards sets |
English PDF |
| GB/T 40713-2021 |
General technical requirements for complete sets of building ceramics production equipment 建筑陶瓷生产成套装备通用技术要求 |
China National Standards sets |
English PDF |
| GB 8369.2-2020 |
Transfusion sets for single use—Part 2: With pressure infusion apparatus use 一次性使用输血器 第2部分：压力输血设备用 |
China National Standards sets |
English PDF |
| GB/T 23127-2020 |
Electric appliances connected to the water mains—Avoidance of backsiphonage and failure of hose-sets 与水源连接的电器 避免虹吸和软管组件失效 |
China National Standards sets |
English PDF |
| GB/T 14098-2020 |
Turbines and turbine sets—Measurement of emitted airborne noise—Engineering/survey method 燃气轮机和燃气轮机机组 气载噪声的测量 工程法/简易法 |
China National Standards sets |
English PDF |
| GB 8369.1-2019 |
Transfusion sets for single use—Part 1: Gravity feed 一次性使用输血器 第1部分：重力输血式 |
China National Standards sets |
English PDF |
| GB/T 38327-2019 |
Health informatics—Classification of traditional Chinese medicine data sets 健康信息学 中医药数据集分类 |
China National Standards sets |
English PDF |
| GB/T 38327-2019 |
Health informatics—Classification of traditional Chinese medicine data sets GB/T 38327-2019 |
China National Standards sets |
English PDF |
| GB 38448-2019 |
Minimum allowable values and grades of the energy efficiency and water efficiency for smart water closets 智能坐便器能效水效限定值及等级 |
China National Standards sets |
English PDF |
| GB/T 30329.5-2019 |
Graphic technology—Colour and transparency of printing ink sets for four-colour printing—Part 5:Flexographic printing 印刷技术 四色印刷油墨颜色和透明度 第5部分：柔性版印刷 |
China National Standards sets |
English PDF |
| GB/T 38327-2019 |
Health informatics—Classification of traditional Chinese medicine data sets 健康信息学 中医药数据集分类 |
China National Standards sets |
English PDF |
| GB 8369.1-2019 |
Transfusion sets for single use—Part 1: Gravity feed 一次性使用输血器 第1部分：重力输血式 |
China National Standards sets |
English PDF |
| GB/T 37634-2019 |
Locksets—Test methods 锁具 测试方法 |
China National Standards sets |
English PDF |
| GB/T 11805-2019 |
General specifications of automatic control components (devices) and their related system for hydroturbine-generating sets 水轮发电机组自动化元件（装置）及其系统基本技术条件 |
China National Standards sets |
English PDF |
| GB/T 37391-2019 |
Specification for complete sets of control equipment for PLC 可编程序控制器的成套控制设备规范 |
China National Standards sets |
English PDF |
| GB/T 37089-2018 |
Reciprocating internal combustion engine driven alternating current generating sets—Controller 往复式内燃机驱动的交流发电机组-控制器 |
China National Standards sets |
English PDF |
| GB/T 36920-2018 |
Locksets─Terminology 锁具-术语 |
China National Standards sets |
English PDF |
| GB/T 36379-2018 |
Evaluation indicators classifications for informal finance assets 民间金融资产评价指标分类 |
China National Standards sets |
English PDF |
| GB 8368-2018 |
Infusion sets for single use—Gravity feed 一次性使用输液器 重力输液式 |
China National Standards sets |
English PDF |
| GB/T 34869-2017 |
Metal-oxide varistor for the protection of series compensation capacitor banks sets 串联补偿装置电容器组保护用金属氧化物限压器 |
China National Standards sets |
English PDF |
| GB/T 34639-2017 |
Technology requirements of computer control for complete sets of feed processing equipment 饲料加工成套设备计算机控制技术要求 |
China National Standards sets |
English PDF |
| GB 25502-2017 |
Minimum allowable values of water efficiency and water efficiency grades for water closets 坐便器水效限定值及水效等级 |
China National Standards sets |
English PDF |
| GB/T 2668-2017 |
Specifications for single，layer apparels and clothing sets 单服、套装规格 |
China National Standards sets |
English PDF |
| GB/T 35416-2017 |
Classification and codes for intangible assets 无形资产分类与代码 |
China National Standards sets |
English PDF |
| GB/T 35427-2017 |
Core metadata for books copyright assets 图书版权资产核心元数据 |
China National Standards sets |
English PDF |
| GB/T 33199.1-2016 |
Mechanical vibration—Torsional vibration of rotating machinery— Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW 机械振动 旋转机械扭振 第1部分：50MW以上陆地安装的透平和燃气轮机发电机组 |
China National Standards sets |
English PDF |
| GB/T 22181.24-2016 |
Plasma display panels—Part 2-4: Methods for measuring the characteristics of devices for digital television sets 等离子体显示器件 第2-4部分：数字电视机用器件特性测量方法 |
China National Standards sets |
English PDF |
| GB/T 32584-2016 |
Evaluation of mechanical vibration for machine sets in hydraulic power plants and pump-storage plants 水力发电厂和蓄能泵站机组机械振动的评定 |
China National Standards sets |
English PDF |
| GB/T 6075.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在非旋转部件上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards sets |
English PDF |
| GB/T 32355.2-2015 |
Assessment values of recyclability rate for electrical and electronic products—Part 2: Washing machines, television sets and computers 电工电子产品可再生利用率评价值 第2部分：洗衣机、电视机和微型计算机 |
China National Standards sets |
English PDF |
| GB/T 11348.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on rotating shafts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在旋转轴上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards sets |
English PDF |
| GB 2099.7-2015 |
Plugs and socket-outlets for household and similar purposes—Part 2-7：Particular requirements for cord extension sets 家用和类似用途插头插座 第2-7部分：延长线插座的特殊要求 |
China National Standards sets |
English PDF |
| GB/T 22181.6-2015 |
Plasma display panels—Part 6: Blank detail specification for plasma display panels used for digital TV sets 等离子体显示器件 第6部分：数字电视机用等离子体显示器件空白详细规范 |
China National Standards sets |
English PDF |
| GB 6675.13-2014 |
Safety of toys―Part 13：Chemical toys (sets) other than experimental sets 玩具安全 第13部分：除实验玩具外的化学套装玩具 |
China National Standards sets |
English PDF |
| GB/T 31038-2014 |
General technical condition for high voltage diesel-generating sets 高电压柴油发电机组通用技术条件 |
China National Standards sets |
English PDF |
| GB 50877-2014 |
Code for installation and acceptance of fire resistant shutters, fire resistant doorsets and fire resistant windows 防火卷帘、防火门、防火窗施工及验收规范 |
China National Standards sets |
English PDF |
| GB/T 30472-2013 |
Technical specification of complete sets of feed processing equipment 饲料加工成套设备技术规范 |
China National Standards sets |
English PDF |
| GB/T 30329.1-2013 |
Graphic technology―Colour and transparency of printing ink sets for four-colour printing―Part 1: Sheet-fed and heat-set web offset lithographic printing 印刷技术 四色印刷油墨颜色和透明度 第1部分：单张纸和热固型卷筒纸胶印 |
China National Standards sets |
English PDF |
| GB/T 29049-2012 |
Doorsets - Vertical load test 整樘门 垂直荷载试验 |
China National Standards sets |
English PDF |
| GB/T 29129-2012 |
Marine disel engine for alternating current generating sets 船舶交流发电机组用柴油发动机 |
China National Standards sets |
English PDF |
| GB 29364-2012 |
Indicating and control unit for fire resistant doorsets 防火门监控器 |
China National Standards sets |
English PDF |
| GB/T 29270.3-2012 |
Information technology - Specification for the testing of coded character sets - Part 3：Uyghur, Kazak and Kirghiz 信息技术 编码字符集测试规范 第3部分：维吾尔文、哈萨克文、柯尔克孜文 |
China National Standards sets |
English PDF |
| GB/T 29270.2-2012 |
Information technology - Specification for the testing of coded character sets - Part 2：Tibetan 信息技术 编码字符集测试规范 第2部分：藏文 |
China National Standards sets |
English PDF |
| GB/T 29270.1-2012 |
Information technology - Specification for the testing of coded character sets - Part 1：Mongolian 信息技术 编码字符集测试规范 第1部分：蒙古文 |
China National Standards sets |
English PDF |
| GB/T 2820.11-2012 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods 往复式内燃机驱动的交流发电机组 第11部分：旋转不间断电源 性能要求和试验方法 |
China National Standards sets |
English PDF |
| GB 28379-2012 |
Minimum allowable values of water efficiency and water efficiency grades for flush valve for water closets 便器冲洗阀用水效率限定值及用水效率等级 |
China National Standards sets |
English PDF |
| GB/T 26770-2011 |
Parking guidance information sets 停车诱导信息集 |
China National Standards sets |
English PDF |
| GB 26387-2011 |
Safety of toys - Experimental sets for chemistry and related activities 玩具安全 化学及类似活动的实验玩具 |
China National Standards sets |
English PDF |
| GB/T 26219-2010 |
Electrical accessories - Y-splitter cord sets and Y-splitter interconnection cord sets 电器附件 Y型电线组件和Y型互连电线组件 |
China National Standards sets |
English PDF |
| GB/T 20875.2-2010 |
Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets 电气绝缘材料水解稳定性试验方法 第2部分：热固性模塑材料 |
China National Standards sets |
English PDF |
| GB/T 1001.2-2010 |
Insulators for overhead lines with a nominal voltage above 1000V - Part 2: Insulator strings and insulator sets for a.c.systems - Definitions, test methods and acceptance criteria 标准电压高于1000V的架空线路绝缘子 第2部分：交流系统用绝缘子串及绝缘子串组 定义、试验方法和接收准则 |
China National Standards sets |
English PDF |
| GB 25502-2010 |
Minimum allowable values of water efficiency and water efficiency grades for water closets 坐便器用水效率限定值及用水效率等级 |
China National Standards sets |
English PDF |
| GB/T 14885-2010 |
Classification and codes for fixed assets 固定资产分类与代码 |
China National Standards sets |
English PDF |
| GB/T 25084-2010 |
Insulator strings and sets for overhead lines with a nominal voltage greater than 1000V - AC power arc tests 标称电压高于1000V的架空线路用绝缘子串和绝缘子串组 交流工频电弧试验 |
China National Standards sets |
English PDF |
| GB/T 2820.6-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods 往复式内燃机驱动的交流发电机组 第6部分：试验方法 |
China National Standards sets |
English PDF |
| GB/T 2820.5-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets 往复式内燃机驱动的交流发电机组 第5部分：发电机组 |
China National Standards sets |
English PDF |
| GB/T 2820.4-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear 往复式内燃机驱动的交流发电机组 第4部分：控制装置和开关装置 |
China National Standards sets |
English PDF |
| GB/T 2820.3-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets 往复式内燃机驱动的交流发电机组 第3部分：发电机组用交流发电机 |
China National Standards sets |
English PDF |
| GB/T 2820.2-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines 往复式内燃机驱动的交流发电机组 第2部分：发动机 |
China National Standards sets |
English PDF |
| GB/T 2820.1-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance 往复式内燃机驱动的交流发电机组 第1部分：用途、定额和性能 |
China National Standards sets |
English PDF |
| GB/T 23833-2009 |
Bar code for commodity - Numbering and symbol marking of assets 商品条码 资产编码与条码表示 |
China National Standards sets |
English PDF |
| GB/T 23640-2009 |
AC generators for reciprocating internal combustion(RIC) engine driven generating sets 往复式内燃机(RIC)驱动的交流发电机 |
China National Standards sets |
English PDF |
| GB/T 23565.4-2009 |
Sliding guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滑动导向钢板模架 第4部分：四导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23565.3-2009 |
Sliding guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滑动导向钢板模架 第3部分：中间导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23565.2-2009 |
Sliding guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滑动导向钢板模架 第2部分：对角导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23565.1-2009 |
Sliding guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滑动导向钢板模架 第1部分：后侧导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23563.4-2009 |
Ball-bearing guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滚动导向钢板模架 第4部分：四导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23563.3-2009 |
Ball-bearing guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滚动导向钢板模架 第3部分：中间导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23563.2-2009 |
Ball-bearing guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滚动导向钢板模架 第2部分：对角导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23563.1-2009 |
Ball-bearing guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滚动导向钢板模架 第1部分：后侧导柱模架 |
China National Standards sets |
English PDF |
| GB/T 23127-2008 |
Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets 与水源连接的电器 避免虹吸和软管组件失效 |
China National Standards sets |
English PDF |
| GB/T 17113-2008 |
The technical requirements and test methods for cordless telephone sets 无绳电话机技术要求和测试方法 |
China National Standards sets |
English PDF |
| GB/T 11348.5-2008 |
Mechanical vibration evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants 旋转机械转轴径向振动的测量和评定 第5部分：水力发电厂和泵站机组 |
China National Standards sets |
English PDF |
| GB 12987-2008 |
Concrete hollow floor slab and complete sets for village constructs 乡村建设用混凝土圆孔板和配套构件 |
China National Standards sets |
English PDF |
| GB/T 14155-2008 |
Doorsets - Soft heavy body impact test 整樘门 软重物体撞击试验 |
China National Standards sets |
English PDF |
| GB 15934-2008 |
Electrical accessories - Cord sets and interconnection cord sets 电器附件 电线组件和互连电线组件 |
China National Standards sets |
English PDF |
| GB/T 11805-2008 |
Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets 水轮发电机组自动化元件(装置)及其系统基本技术条件 |
China National Standards sets |
English PDF |
| GB 12955-2008 |
Fire resistant doorsets 防火门 |
China National Standards sets |
English PDF |
| GB/T 2856.2-2008 |
Holders for ball-bearing die sets for stamping dies - Part 2: Die holders for die sets 冲模滚动导向模座 第2部分：下模座 |
China National Standards sets |
English PDF |
| GB/T 2856.1-2008 |
Holders for ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets 冲模滚动导向模座 第1部分：上模座 |
China National Standards sets |
English PDF |
| GB/T 2855.2-2008 |
Holders for sliding guide die sets for stamping dies - Part 2: Die holders for die sets 冲模滑动导向模座 第2部分：下模座 |
China National Standards sets |
English PDF |
| GB/T 2855.1-2008 |
Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets 冲模滑动导向模座 第1部分：上模座 |
China National Standards sets |
English PDF |
| GB/T 2852-2008 |
Ball-bearing die sets for stamping dies 冲模滚动导向模架 |
China National Standards sets |
English PDF |
| GB/T 2851-2008 |
Sliding guide die sets for stamping dies 冲模滑动导向模架 |
China National Standards sets |
English PDF |
| GB/T 3632-2008 |
sets of torshear type high strength bolt hexagon nut and plain washer for steel structures 钢结构用扭剪型高强度螺栓连接副 |
China National Standards sets |
English PDF |
| GB/T 21428-2008 |
Reciprocating internal combustion engine driven generating sets - Safety 往复式内燃机驱动的发电机组 安全性 |
China National Standards sets |
English PDF |
| GB/T 20134-2006 |
Road traffic information collection - Incident message sets 道路交通信息采集 事件信息集 |
China National Standards sets |
English PDF |
| GB/T 3450-2006 |
Noise limit and measurement inside driver’s cabs of railway locomotive and powered car train-sets 铁道机车和动车组司机室噪声限值及测量方法 |
China National Standards sets |
English PDF |
| GB 8369-2005 |
Transfusion sets for single use 一次性使用输血器 |
China National Standards sets |
English PDF |
| GB 8368-2005 |
Infusion sets for single use,gravity feed 一次性使用输液器 重力输液式 |
China National Standards sets |
English PDF |
| GB 18458.3-2005 |
Special infusion sets-Part 3:Light-resistant infusion sets for single use 专用输液器 第3部分:一次性使用避光输液器 |
China National Standards sets |
English PDF |
| GB 18458.2-2003 |
Special infusion sets--Part 2: Burette-type infusion sets for single use 专用输液器 第2部分: 一次性使用滴定管式输液器 |
China National Standards sets |
English PDF |
| GB 16895.20-2003 |
Electrical installations of buildings--Part 5: Selection and erection of electrical equipment--Chapter 55: Other equipment--Section 551: Low-voltage generating sets 建筑物电气装置 第5部分:电气设备的选择和安装 第55章:其他设备 第551节:低压发电设备 |
China National Standards sets |
English PDF |
| GB/T 2820.9-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part9:Measurement and evaluation of mechanical vibrations 往复式内燃机驱动的交流发电机组 第9部分:机械振动的测量和评价 |
China National Standards sets |
English PDF |
| GB/T 2820.8-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 8:Requirements and tests for low-power generating sets 往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验 |
China National Standards sets |
English PDF |
| GB/T 2820.12-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 12:Emergency power supply to safety services 往复式内燃机驱动的交流发电机组 第12部分:对安全装置的应急供电 |
China National Standards sets |
English PDF |
| GB/T 2820.10-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 10:Measurement of airborne noise by the enveloping surface method 往复式内燃机驱动的交流发电机组 第10部分:噪声的测量(包面法) |
China National Standards sets |
English PDF |
| GB/T 6075.5-2002 |
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants 在非旋转部件上测量和评价机器的机械振动 第5部分:水力发电厂和泵站机组 |
China National Standards sets |
English PDF |
| GB/T 2820.7-2002 |
Reciprocating internal combustion engine driven alternating current generating sets--Part 7:Technical declarations for specification and design 往复式内燃机驱动的交流发电机组 第7部分:用于技术条件和设计的技术说明 |
China National Standards sets |
English PDF |
| GB 18458.1-2001 |
Infusion sets for specialpurpose--Part 1:Infusion sets with precision filters for single use 专用输液器 第1部分:一次性使用精密过滤输液器 |
China National Standards sets |
English PDF |
| GB/T 6075.4-2001 |
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards sets |
English PDF |
| GB/T 11348.4-1999 |
Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 4:Gas turbine sets 旋转机械转轴径向振动的测量和评定 第4部分:燃气轮机组 |
China National Standards sets |
English PDF |
| GB 16959-1997 |
Information technology--Tibetan coded character sets for information interchange--Basic set 信息技术 信息交换用藏文编码字符集 基本集 |
China National Standards sets |
English PDF |
| GB/T 15273.7-1996 |
Informationprocessing--8-Bit single-byte coded graphic character sets--Part 7:Latin/Greek alphabet 信息处理 八位单字节编码图形字符集 第七部分:拉丁/希腊字母 |
China National Standards sets |
English PDF |
| GB/T 15273.4-1995 |
Information processing--8-Bit single-byte coded graphic character sets--Part 4:Latin alphabet No.4 信息处理 八位单字节编码图形字符集 第四部分:拉丁字母四 |
China National Standards sets |
English PDF |
| GB/T 15273.3-1995 |
Information processing--8-Bit single-byte coded graphic character sets--Part 3:Latin alphabet No.3 信息处理 八位单字节编码图形字符集 第三部分:拉丁字母三 |
China National Standards sets |
English PDF |
| GB/T 15273.2-1995 |
Information processing--8-Bit single-byte coded graphic character sets--Part 2:Latin alphabet No.2 信息处理 八位单字节编码图形字符集 第二部分:拉丁字母二 |
China National Standards sets |
English PDF |
| GB/T 5261-1994 |
Information processing--Control functions for 7-bit and 8-bit coded character sets 信息处理 七位和八位编码字符集用的控制功能 |
China National Standards sets |
English PDF |
| GB/T 15273.1-1994 |
Information processing--8-Bit single-byte coded graphic character sets--Part 1:Latin alphabet No.1 信息处理 八位单字节编码图形字符集 第一部分:拉丁字母一 |
China National Standards sets |
English PDF |
| GB/T 12508-1990 |
Alphanumeric character sets for optical recognition--Part 2:Character set OCR-B--Shapes and dimensions of the printed image 光学识别用字母数字字符集 第二部分:OCR-B 字符集印刷图象的形状和尺寸 |
China National Standards sets |
English PDF |
| GB/T 12053-1989 |
Alphanumeric character sets for optical recognition--Part 1:Character set OCR-A--Shapes and dimensions of the printed image 光学识别用字母数字字符集 第一部分:OCR-A 字符集印刷图象的形状和尺寸 |
China National Standards sets |
English PDF |
| GB 12050-1989 |
Information processing--Uighur coded graphic character sets for information interchange 信息处理 信息交换用维吾尔文编码图形字符集 |
China National Standards sets |
English PDF |
| GB/T 8565.3-1988 |
Information processing--Coded character sets for text communication--Part 3:Control functions for page-image format 信息处理 文本通信用编码字符集 第三部分:按页成象格式用控制功能 |
China National Standards sets |
English PDF |
| GB/T 8565.2-1988 |
Information processing--Coded character sets for text communication--Part 2:Graphic character sets 信息处理 文本通信用编码字符集 第二部分:图形字符集 |
China National Standards sets |
English PDF |
| GB/T 8565.1-1988 |
Information processing--Coded character sets for text communication--Part 1:General introduction 信息处理 文本通信用编码字符集 第一部分:总则 |
China National Standards sets |
English PDF |
| GB 8045-1987 |
Mongolian 7-bit and 8-bit coded graphic character sets for information processing interchange 信息处理交换用蒙古文七位和八位编码图形字符集 |
China National Standards sets |
English PDF |
| Find out:136Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
