Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 4256-2022 |
Straight shank and Morse Taper Shank Reaming Drills {译} 直柄和莫氏锥柄扩孔钻 |
China National Standards shank |
 English PDF |
| GB/Z 41595-2022 |
Safety of woodworking tools - Requirements for shanks of milling cutters {译} 木工刀具安全 柄铣刀柄部的要求 |
China National Standards shank |
English PDF |
| GB/T 28011-2021 |
shanks for footwear 鞋类勾心 |
China National Standards shank |
English PDF |
| GB/T 20326-2021 |
Long full-diameter shank taps with recess 粗长柄机用丝锥 |
China National Standards shank |
English PDF |
| GB/T 20323-2020 |
Milling cutters designation —shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards shank |
English PDF |
| GB/T 3903.34-2019 |
Footwear—Test methods for shanks—Longitudinal stiffness 鞋类 勾心试验方法 纵向刚度 |
China National Standards shank |
English PDF |
| GB/T 6374-2018 |
Rock drilling machines and pneumatic tools—shanks and fitting dimensions of chuck bushings 凿岩机械与气动工具-尾柄和衬套配合尺寸 |
China National Standards shank |
English PDF |
| GB/T 36485.2-2018 |
Tool holders with rectangular shank for indexable inserts—Part 2: Arbor dimension 装可转位刀片的矩形柄刀杆 第2部分：刀杆尺寸 |
China National Standards shank |
English PDF |
| GB/T 36485.1-2018 |
Tool holders with rectangular shank for indexable inserts—Part 1:General survey, correlation and determination of dimensions 装可转位刀片的矩形柄刀杆 第1部分：概述、关联性和尺寸的确定 |
China National Standards shank |
English PDF |
| GB/T 33524.1-2017 |
Modular taper interface with ball track system—Part 1: Dimensions and designation of shanks 带有钢球拉紧系统的模块圆锥接口 第1部分：柄部尺寸和标记 |
China National Standards shank |
English PDF |
| GB/T 1132-2017 |
Machine chucking reamers with cylindrical shanks and Morse taper shanks 直柄和莫氏锥柄机用铰刀 |
China National Standards shank |
English PDF |
| GB/T 4243-2017 |
Long fluted machine reamers with Morse taper shanks 莫氏锥柄长刃机用铰刀 |
China National Standards shank |
English PDF |
| GB/T 4247-2017 |
Machine bridge reamers with Morse taper shanks 莫氏锥柄机用桥梁铰刀 |
China National Standards shank |
English PDF |
| GB/T 32557.1-2016 |
Polygonal taper interface with flange contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分：柄部尺寸和标记 |
China National Standards shank |
English PDF |
| GB/T 1443-2016 |
Self-holding tapers for machine tools and tool shanks 机床和工具柄用自夹圆锥 |
China National Standards shank |
English PDF |
| GB/T 30474.1-2013 |
Holding fixtures of cylindrical abrasive sleeves―Part 1: Holding fixtures with shank for hand-held grinding machines 筒形砂套夹紧装置 第1部分：用于手持式磨削机上的带轴夹紧装置 |
China National Standards shank |
English PDF |
| GB/T 19449.3-2013 |
Hollow taper interface with flange contact surface― Part 3: Dimensions of shanks for stationary tools 带有法兰接触面的空心圆锥接口 第3部分：用于非旋转类工具 柄的尺寸 |
China National Standards shank |
English PDF |
| GB/T 10944.5-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 5: Technical specifications of Retention knobs 自动换刀7:24圆锥工具柄 第5部分：拉钉的技术条件 |
China National Standards shank |
English PDF |
| GB/T 10944.4-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 4: Technical specifications for shanks 自动换刀7:24圆锥工具柄 第4部分：柄的技术条件 |
China National Standards shank |
English PDF |
| GB/T 10944.3-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 3:Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF,JD and JF 自动换刀7:24圆锥工具柄 第3部分：AC、AD、AF、UC、UD、UF、JD 和 JF型拉钉 |
China National Standards shank |
English PDF |
| GB/T 10944.2-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 2：Dimensions and designation of shanks of forms J，JD and JF 自动换刀7:24圆锥工具柄 第2部分：J、JD和JF型柄的尺寸和标记 |
China National Standards shank |
English PDF |
| GB/T 10944.1-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 1：Dimensions and designation of shanks of forms A，AD，AF，U，UD and UF 自动换刀7:24圆锥工具柄 第1部分：A、AD、AF、U、UD和UF型柄的尺寸和标记 |
China National Standards shank |
English PDF |
| GB/T 30165-2013 |
Textile machinery and accessories―Latch-type needles for knitting machines―Coordination of shank widths and hook heights 纺织机械与附件 针织机用舌针 针杆厚度和针钩高度的对应尺寸 |
China National Standards shank |
English PDF |
| GB/T 31.1-2013 |
Hexagon bolts with split pin hole on shank 六角头螺杆带孔螺栓 |
China National Standards shank |
English PDF |
| GB/T 28-2013 |
Hexagon fit shank bolts with split pin hole on shank 六角头螺杆带孔加强杆螺栓 |
China National Standards shank |
English PDF |
| GB/T 27-2013 |
Hexagon fit shank bolts 六角头加强杆螺栓 |
China National Standards shank |
English PDF |
| GB/T 28257-2012 |
long shank nut taps 长柄螺母丝锥 |
China National Standards shank |
English PDF |
| GB 28011-2011 |
shanks for footwear 鞋类钢勾心 |
China National Standards shank |
English PDF |
| GB/T 10051.7-2010 |
Lifting hooks - Part7: Ramshorn shank hooks 起重吊钩 第7部分：直柄双钩 |
China National Standards shank |
English PDF |
| GB/T 10051.6-2010 |
Lifting hooks - Part 6: Blanks of ramshorn shank hooks 起重吊钩 第6部分：直柄双钩毛坯件 |
China National Standards shank |
English PDF |
| GB/T 10051.5-2010 |
Lifting hooks - Part5: shank hooks with point 起重吊钩 第5部分：直柄单钩 |
China National Standards shank |
English PDF |
| GB/T 10051.4-2010 |
Lifting hooks - Part 4: Blanks of shank hook with point 起重吊钩 第4部分：直柄单钩毛坯件 |
China National Standards shank |
English PDF |
| GB/T 25992-2010 |
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions 整体硬质合金和陶瓷直柄球头立铣刀 尺寸 |
China National Standards shank |
English PDF |
| GB/T 25667.3-2010 |
Solid carbide twist drills with parallel shank Part3: Technical specifications 整体硬质合金直柄麻花钻 第3部分：技术条件 |
China National Standards shank |
English PDF |
| GB/T 25667.2-2010 |
Solid carbide twist drills with parallel shank Part2: The types and dimensions for parallel shank twist drills with 2°anguar fiants 整体硬质合金直柄麻花钻 第2部分：2°斜削平直柄麻花钻型式与尺寸 |
China National Standards shank |
English PDF |
| GB/T 25667.1-2010 |
Solid carbide twist drills with parallel shank Part1: The types and dimensions for parallel shank twist drills 整体硬质合金直柄麻花钻 第1部分：直柄麻花钻型式与尺寸 |
China National Standards shank |
English PDF |
| GB/T 25666-2010 |
Parallel shank twist drills with carbide tips 硬质合金直柄麻花钻 |
China National Standards shank |
English PDF |
| GB/T 25665-2010 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions 整体硬切削材料直柄圆弧立铣刀 尺寸 |
China National Standards shank |
English PDF |
| GB/T 25297.2-2010 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes 电阻点焊 电极接头，外锥度1:10 第2部分：末端插入式圆柱柄配合 |
China National Standards shank |
English PDF |
| GB/T 6117.3-2010 |
End mills - Part 3: Milling cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 6117.2-2010 |
End mills - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 6117.1-2010 |
End mills - Part 1: Milling cutters with parallel shanks 立铣刀 第1部分：直柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 25378-2010 |
Collets with 8°setting angle for tool shanks - Collets，nuts and fitting dimensions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards shank |
English PDF |
| GB/T 3903.35-2008 |
Footwear - Test methods for shanks - Fatigue resistance 鞋类 勾心试验方法 抗疲劳性 |
China National Standards shank |
English PDF |
| GB/T 3903.34-2008 |
Footwear - Test methods for shanks - Longitudinal stiffness 鞋类 勾心试验方法 纵向刚度 |
China National Standards shank |
English PDF |
| GB/T 6135.4-2008 |
Parallel shank twist drills - Part 4: The types and dimensions for extra long parallel shank twist drills 直柄麻花钻 第4部分：直柄超长麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6135.3-2008 |
Parallel shank twist drills - Part 3: The types and dimensions for parallel shank long series twist drills 直柄麻花钻 第3部分：直柄长麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6135.2-2008 |
Parallel shank twist drills - Part 2: The types and dimensions for parallel shank stub series twisl drills and parallel shank jobber series twist drills 直柄麻花钻 第2部分：直柄短麻花钻和直柄麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6135.1-2008 |
Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank 直柄麻花钻 第1部分：粗直柄小麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 1438.4-2008 |
Taper shank twist drills - Part 4: The types and dimensions extra-long for Morse taper shank twist drills 锥柄麻花钻 第4部分：莫氏锥柄超长麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 1438.3-2008 |
Taper shank twist drills - Part 3: The types and dimensions for lengthened Morse taper shank twist drills 锥柄麻花钻 第3部分：莫氏锥柄加长麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 1438.2-2008 |
Taper shank twist drills - Part 2: The types and dimensions for long Morse taper shank twist drills 锥柄麻花钻 第2部分：莫氏锥柄长麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 1438.1-2008 |
Taper shank twist drills - Part 1: The types and dimensions for Morse taper shank twist drills 锥柄麻花钻 第1部分：莫氏锥柄麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 3832-2008 |
Broaches shanks 拉刀柄部 |
China National Standards shank |
English PDF |
| GB/T 16770.2-2008 |
Solid hardmetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分：技术条件 |
China National Standards shank |
English PDF |
| GB/T 16770.1-2008 |
Solid hardmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards shank |
English PDF |
| GB/T 16456.3-2008 |
End mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 16456.1-2008 |
End mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical shanks with a parallel flat 可转位钻头用削平直柄 |
China National Standards shank |
English PDF |
| GB/T 878-2007 |
Slotted headless screws with shank 开槽无头螺钉 |
China National Standards shank |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 3464.3-2007 |
Machine and hand taps - Part 3：Short shank machine and hand taps 机用和手用丝锥 第3部分：短柄机用和手用丝锥 |
China National Standards shank |
English PDF |
| GB/T 3464.1-2007 |
Machine and hand taps - Part 1: Plain parallel shank machine and hand taps 机用和手用丝锥 第1部分：通用柄机用和手用丝锥 |
China National Standards shank |
English PDF |
| GB/T 328.18-2007 |
Test methods for building sheets for waterproofing - Part 18: Bitumen sheets for waterproofing-resistance to tearing(nail shank) 建筑防水卷材试验方法 第18部分：沥青防水卷材 撕裂性能（钉杆法） |
China National Standards shank |
English PDF |
| GB/T 5342.2-2006 |
Face milling cutter with indexable inserts - Part 2: Face milling cutter with Morse taper shanks 可转位面铣刀 第2部分：莫氏锥柄面铣刀 |
China National Standards shank |
English PDF |
| GB/T 5340.2-2006 |
End mill with indexable inserts - Part 2: End mill with Morse taper shank 可转位立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 5340.1-2006 |
End mill with indexable inserts - Part 1: End mill with flatted parallel shank 可转位立铣刀 第1部分：削平直柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 10947-2006 |
Taper shank twist drills with carbide tips 硬质合金锥柄麻花钻 |
China National Standards shank |
English PDF |
| GB/T 6133.2-2006 |
Tool chucks for flated parallel shank tools - Part 2: Connecting dimensions of chucks and designation 削平型直柄刀具夹头 第2部分: 夹头的连接尺寸和标记 |
China National Standards shank |
English PDF |
| GB/T 6133.1-2006 |
Tool chucks for flated parallel shank tools - part 1: Dimensions of the driving system of tool shanks 削平型直柄刀具夹头 第1部分：刀具柄部传动系统的尺寸 |
China National Standards shank |
English PDF |
| GB/T 6131.4-2006 |
Cylindrical shanks for milling cutters - part 4: Types and sizes of threaded cylindrical shanks 铣刀直柄 第4部分: 螺纹柄的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6131.2-2006 |
Cylindrical shanks for milling cutters - part 2: Types and sizes of flatted cylindrical shanks 铣刀直柄 第2部分：削平直柄的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 6131.1-2006 |
Cylindrical shanks for milling cutters - part 1: Types and sizes of plain cylindrical shanks 铣刀直柄 第1部分：普通直柄的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 20336-2006 |
Boring bars (tool holders with cylindrical shank) for indexable inserts - Designation 装可转位刀片的镗刀杆（圆柱形）-代号 |
China National Standards shank |
English PDF |
| GB/T 20335-2006 |
Boring bars (tool holders with cylindrical shank) for indexable inserts - Dimensions 装可转位刀片的镗刀杆（圆柱形）-尺寸 |
China National Standards shank |
English PDF |
| GB/T 20332-2006 |
Machine taper 1:50 pin reamers with Morse taper shanks 锥柄机用1:50锥度销子铰刀 |
China National Standards shank |
English PDF |
| GB/T 20331-2006 |
Machine taper 1:50 pin reamers with parallel shanks 直柄机用1:50锥度销子铰刀 |
China National Standards shank |
English PDF |
| GB/T 20327-2006 |
shanks for turning and planing tools - Shapes and dimensions of the section 车刀和刨刀刀杆 截面形状和尺寸 |
China National Standards shank |
English PDF |
| GB/T 20326-2006 |
Long Full-diameter shank taps with recess 粗长柄机用丝锥 |
China National Standards shank |
English PDF |
| GB/T 20323.2-2006 |
Milling cutters - Designation - Part 2: shank type and bore type milling cutters with indexable inserts 铣刀代号 第2部分：装可转位刀片的带柄和带孔铣刀 |
China National Standards shank |
English PDF |
| GB/T 20323.1-2006 |
Milling cutters - Designation - Part 1: shank type end mills of solid or tipped design 铣刀代号 第1部分：整体或镶齿结构的带柄立铣刀 |
China National Standards shank |
English PDF |
| GB/T 6374-2004 |
shanks for rock drilling machines and pneumatic tools and fitting dimensions of chuck bushings 凿岩机械与气动工具 尾柄和衬套配合尺寸 |
China National Standards shank |
English PDF |
| GB/T 17980.90-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 90:Fungicides against black shank of tobacco 农药 田间药效试验准则(二) 第90部分:杀菌剂防治烟草黑胫病 |
China National Standards shank |
English PDF |
| GB/T 6340-2004 |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks--Technical specifications 直柄反燕尾槽铣刀和直柄燕尾槽铣刀 技术条件 |
China National Standards shank |
English PDF |
| GB/T 6338-2004 |
Inverse dovetail cutters and dovetailcutters with cylindrical shanks 直柄反燕尾槽铣刀和直柄燕尾槽铣刀 |
China National Standards shank |
English PDF |
| GB/T 4267-2004 |
Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares 直柄回转工具 柄部直径和传动方头的尺寸 |
China National Standards shank |
English PDF |
| GB/T 4264-2004 |
Countersinks，90°，with Morse taper shanks and detachable pilots 带可换导柱的莫氏锥柄90°锥面锪钻 |
China National Standards shank |
English PDF |
| GB/T 4263-2004 |
Countersinks，90°，with parallel shanks and solid pilots 带整体导柱的直柄90°锥面锪钻 |
China National Standards shank |
English PDF |
| GB/T 4261-2004 |
Counterbores with Morse taper shanks and detachable pilots 带可换导柱的莫氏锥柄平底锪钻 |
China National Standards shank |
English PDF |
| GB/T 4260-2004 |
Counterbores with parallel shanks and solid pilots 带整体导柱的直柄平底锪钻 |
China National Standards shank |
English PDF |
| GB/T 4258-2004 |
Parallel shanks countersinks for angles60°、90°and 120° inclusive 60°、90°、120°直柄锥面锪钻 |
China National Standards shank |
English PDF |
| GB/T 4256-2004 |
Core drills with parallel shanks and with Morse taper shanks 直柄和莫氏锥柄扩孔钻 |
China National Standards shank |
English PDF |
| GB/T 4247-2004 |
Machine bridge reamers with Morse taper shanks 莫氏锥柄机用桥梁铰刀 |
China National Standards shank |
English PDF |
| GB/T 4243-2004 |
Long fluted machine reamers，Morse tape shanks 莫氏锥柄长刃机用铰刀 |
China National Standards shank |
English PDF |
| GB/T 19449.1-2004 |
Hollow taper interface with flange contact surface--Part 1:shanks--Dimensions 带有法兰接触面的空心圆锥接口 第1部分:柄部----尺寸 |
China National Standards shank |
English PDF |
| GB/T 19448.8-2004 |
Tool holders with cylindrical shank--Part 8:Type Z，accessories 圆柱柄刀夹 第8部分:Z型，附件 |
China National Standards shank |
English PDF |
| GB/T 19448.7-2004 |
Tool holders with cylindricalshank--Part 7:Type F with taper seat 圆柱柄刀夹 第7部分:装锥柄刀具的F型刀夹 |
China National Standards shank |
English PDF |
| GB/T 19448.6-2004 |
Tool holders with cylindrical shank--Part 6:Type E with cylindrical seat 圆柱柄刀夹 第6部分:装圆柱柄刀具的E型刀夹 |
China National Standards shank |
English PDF |
| GB/T 19448.5-2004 |
Tool holders with cylindrical shank--Part 5:Type D with more than one rectangular seat 圆柱柄刀夹 第5部分:装一个以上矩形车刀的D型刀夹 |
China National Standards shank |
English PDF |
| GB/T 19448.4-2004 |
Tool holders with cylindrical shank--Part 4:Type C with rectangular axial seat 圆柱柄刀夹 第4部分:装轴向矩形车刀的C型刀夹 |
China National Standards shank |
English PDF |
| GB/T 19448.3-2004 |
Tool holders with cylindrical shank--Part 3:Type B with rectangular radial seat 圆柱柄刀夹 第3部分:装径向矩形车刀的B型刀夹 |
China National Standards shank |
English PDF |
| GB/T 19448.2-2004 |
Tool holders with cylindrical shank--Part 2:Type A，shanks for tool holders of special designs 圆柱柄刀夹 第2部分:制造专用刀夹的A型半成品 |
China National Standards shank |
English PDF |
| GB/T 19448.1-2004 |
Tool holders with cylindrical shank--Part 1:Cylin-drical shank，location bore--Technical delivery conditions 圆柱柄刀夹 第1部分:圆柱柄、安装孔----供货技术条件 |
China National Standards shank |
English PDF |
| GB/T 1442-2004 |
Driving tenons and sockets for parallelshank tools--Dimensions 直柄工具用传动扁尾及套筒 尺寸 |
China National Standards shank |
English PDF |
| GB/T 1132-2004 |
Machine chucking reamers with parallel shanks or Morse taper shanks 直柄和莫氏锥柄机用铰刀 |
China National Standards shank |
English PDF |
| GB/T 1143-2004 |
Morse taper shank countersinks for angles 60° and 90°，120° inclusive 60°、90°、120°莫氏锥柄锥面锪钻 |
China National Standards shank |
English PDF |
| GB/T 3464.2-2003 |
Long reduced shank taps 细长柄机用丝锥 |
China National Standards shank |
English PDF |
| GB/T 3837-2001 |
7/24 tapers for tool shanks for manual changing 7∶24手动换刀刀柄圆锥 |
China National Standards shank |
English PDF |
| GB/T 18194-2000 |
Rivet shank diameters 铆钉杆径 |
China National Standards shank |
English PDF |
| GB/T 6131.3-1996 |
Parallel shanks for milling cutters--Part 3:Dimen-sional characteristics of parallel shanks with 2°angular flats 铣刀直柄 第3部分:2°斜削平直柄的型式和尺寸 |
China National Standards shank |
English PDF |
| GB/T 1443-1996 |
Machine tools--Self-holding tapers for tool shanks 机床和工具柄用自夹圆锥 |
China National Standards shank |
English PDF |
| GB/T 949-1988 |
Slotted raised countersunk head screws with waisted shank 开槽半沉头不脱出螺钉 |
China National Standards shank |
English PDF |
| GB/T 948-1988 |
Slotted countersunk head screws with waisted shank 开槽沉头不脱出螺钉 |
China National Standards shank |
English PDF |
| GB/T 839-1988 |
Knurled thumb screws with waisted shank 滚花头不脱出螺钉 |
China National Standards shank |
English PDF |
| GB/T 838-1988 |
Hexagon screws with waisted shank 六角头不脱出螺钉 |
China National Standards shank |
English PDF |
| GB/T 837-1988 |
Slotted pan head screws with waisted shank 开槽盘头不脱出螺钉 |
China National Standards shank |
English PDF |
| GB/T 32.2-1988 |
Hexagon bolts with wire holes on head--Reduced shank--Product grade B 六角头头部带孔螺栓 细杆 B级 |
China National Standards shank |
English PDF |
| GB/T 31.3-1988 |
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B 六角头螺杆带孔螺栓 细牙 A和B级 |
China National Standards shank |
English PDF |
| GB/T 31.2-1988 |
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B 六角头螺杆带孔螺栓 细杆 B级 |
China National Standards shank |
English PDF |
| GB/T 6559-1986 |
Screw thread shanks for thread forming screw--Metric coarse thread series 自攻锁紧螺钉的螺杆 粗牙普通螺纹系列 |
China National Standards shank |
English PDF |
| Find out:122Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
