Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/Z 41305.7-2023 |
Environmental conditions Vibration and shock of electronic equipment Part 7: Transport by rotorcraft {译} 环境条件 电子设备振动和冲击 第7部分:利用旋翼飞机运输 |
China National Standards shock |
English PDF |
GB/Z 41305.2-2022 |
Environmental conditions - vibration and shock of electronic equipment - Part 2: storage and handling of equipment {译} 环境条件 电子设备振动和冲击 第2部分:设备的贮存和搬运 |
China National Standards shock |
English PDF |
GB/T 3298-2022 |
Test method for thermal shock resistance of ceramic ware for daily use {译} 日用陶瓷器抗热震性测定方法 |
China National Standards shock |
English PDF |
GB/T 42259-2022 |
Metal and other inorganic coatings - Test methods for thermal cycle and thermal shock resistance of thermal barrier coatings {译} 金属及其他无机覆盖层 热障涂层耐热循环与热冲击性能测试方法 |
China National Standards shock |
English PDF |
GB/T 7994.3-2022 |
Test methods for glass-lined equipment - Part 3: Mechanical shock resistance gunshot test {译} 搪玻璃设备试验方法 第3部分:耐机械冲击枪击试验 |
China National Standards shock |
English PDF |
GB/T 40455-2021 |
Detection and identification of Blueberry shock virus 蓝莓休克病毒检疫鉴定方法 |
China National Standards shock |
English PDF |
GB/T 20485.43-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards shock |
English PDF |
GB/T 20485.32-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分:谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards shock |
English PDF |
GB/T 18703-2021 |
Mechanical vibration and shock—Hand-arm vibration—Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 机械振动与冲击 手传振动 手套掌部振动传递率的测量与评价 |
China National Standards shock |
English PDF |
GB/T 29716.3-2021 |
Mechanical vibration and shock—Signal processing—Part 3:Methods of time-frequency analysis 机械振动与冲击 信号处理 第3部分:时频分析方法 |
China National Standards shock |
English PDF |
GB/T 9966.11-2021 |
Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock 天然石材试验方法 第11部分:激冷激热加速老化强度测定 |
China National Standards shock |
English PDF |
GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards shock |
English PDF |
GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards shock |
English PDF |
GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards shock |
English PDF |
GB/T 4797.9-2021 |
Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use 环境条件分类 自然环境条件 贮存、运输和使用过程中测得的冲击和振动数据 |
China National Standards shock |
English PDF |
GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分:耐温差急变性能的测定 |
China National Standards shock |
English PDF |
GB/T 32065.11-2021 |
Environmental test methods for oceanographic instruments—Part 11:shock and bump test 海洋仪器环境试验方法 第11部分:冲击与碰撞试验 |
China National Standards shock |
English PDF |
GB/T 38924.5-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 5: shock test 民用轻小型无人机系统环境试验方法 第5部分:冲击试验 |
China National Standards shock |
English PDF |
GB/T 17045-2020 |
Protection against electric shock—Common aspects for installations and equipment 电击防护 装置和设备的通用部分 |
China National Standards shock |
English PDF |
GB/T 16895.21-2020 |
Low-voltage electrical installations—Part 4–41:Protection for safety—Protection against electric shock 低压电气装置 第4-41部分:安全防护 电击防护 |
China National Standards shock |
English PDF |
GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分:试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards shock |
English PDF |
GB/T 38022-2019 |
Horology—shock-resistant watches 钟表 防震手表 |
China National Standards shock |
English PDF |
GB/T 38012-2019 |
Footwear—Test methods for whole shoe—Impact shock attenuating property 鞋类 整鞋试验方法 缓震性能 |
China National Standards shock |
English PDF |
GB/T 37776-2019 |
Methods for the calibration of dynamic force transducers—Calibration by shock force 动态力传感器校准方法 冲击力法校准 |
China National Standards shock |
English PDF |
GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分:试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards shock |
English PDF |
GB/T 2423.5-2019 |
Environmental testing—Part 2:Test methods—Test Ea and guidance:shock 环境试验 第2部分:试验方法 试验Ea和导则:冲击 |
China National Standards shock |
English PDF |
GB/T 37246-2018 |
Test method for thermal-shock resistance of fine ceramics 精细陶瓷抗热震性能试验方法 |
China National Standards shock |
English PDF |
GB/T 2423.7-2018 |
Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品) |
China National Standards shock |
English PDF |
GB/T 28026.1-2018 |
Railway applications—Fixed installations—Electrical safety,earthing and the return circuit—Part 1:Protective provisions against electric shock 轨道交通-地面装置-电气安全、接地和回流-第1部分:电击防护措施 |
China National Standards shock |
English PDF |
GB/T 21563-2018 |
Railway applications—Rolling stock equipment—shock and vibration tests 轨道交通 机车车辆设备 冲击和振动试验 |
China National Standards shock |
English PDF |
GB/T 11349.1-2018 |
Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications 机械振动与冲击 机械导纳的试验确定 第1部分:基本术语与定义、传感器特性 |
China National Standards shock |
English PDF |
GB/T 36416.3-2018 |
Testing machine vocabulary—Part3: Vibration test system and shock testing machines 试验机词汇 第3部分:振动试验系统与冲击试验机 |
China National Standards shock |
English PDF |
GB/T 20485.16-2018 |
Methods for the calibration of vibration and shock transducers—Part 16: Calibration by Earth’s gravitation 振动与冲击传感器校准方法 第16部分:地球重力法校准 |
China National Standards shock |
English PDF |
GB/T 35982-2018 |
Mechanical vibration and shock—Coupling forces at the man-machine interface for hand-transmitted vibration 机械振动与冲击 手传振动人机界面的耦合力 |
China National Standards shock |
English PDF |
GB/T 29716.2-2018 |
Mechanical vibration and shock—Signal processing—Part 2: Time domain windows for Fourier Transform analysis 机械振动与冲击 信号处理 第2部分:傅里叶变换分析的时域窗 |
China National Standards shock |
English PDF |
GB/T 36038-2018 |
Human/human surrogate impact (single shock) testing and evaluation—Guidance on technical aspects 人体/人替身冲击(单向冲击)测试和评价 技术指南 |
China National Standards shock |
English PDF |
GB/T 29716.4-2018 |
Mechanical vibration and shock—Signal processing—Part4:Shock-response spectrum analysis 机械振动与冲击 信号处理 第4部分:冲击响应谱分析 |
China National Standards shock |
English PDF |
GB/T 20485.33-2018 |
Methods for the calibration of vibration and shock transducers—Part 33: Testing of magnetic field sensitivity 振动与冲击传感器校准方法 第33部分:磁灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 20485.42-2018 |
Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity 振动与冲击传感器校准方法 第42部分:高精度地震计的重力加速度法校准 |
China National Standards shock |
English PDF |
GB/T 14598.23-2017 |
Electrical relays—Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment—Section 3: Seismic tests 电气继电器 第21部分:量度继电器和保护装置的振动、冲击、碰撞和地震试验 第3篇:地震试验 |
China National Standards shock |
English PDF |
GB/T 35160.5-2017 |
Test methods for agglomerated stone—Part 5:Determination of thermal shock 合成石材试验方法 第5部分:热激变性能的测定 |
China National Standards shock |
English PDF |
GB/T 3810.9-2016 |
Test methods of ceramic tiles—Part 9: Determination of resistance to thermal shock 陶瓷砖试验方法 第9部分:抗热震性的测定 |
China National Standards shock |
English PDF |
GB/T 32335-2015 |
Mechanical vibration and shock—Parameters to be specified for the acquisition of vibration data 机械振动与冲击 振动数据采集的参数规定 |
China National Standards shock |
English PDF |
GB/T 13441.5-2015 |
Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration—Part 5: Method for evaluation of vibration containing multiple shocks 机械振动与冲击 人体暴露于全身振动的评价 第5部分:包含多次冲击的振动的评价方法 |
China National Standards shock |
English PDF |
GB/T 20485.41-2015 |
Methods for the calibration of vibration and shock transducers—Part 41: Calibration of laser vibrometers 振动与冲击传感器校准方法 第41部分:激光测振仪校准 |
China National Standards shock |
English PDF |
GB/T 18384.3-2015 |
Electrically propelled road vehicles—Safety specifications—Part 3: Protection of persons against electric shock 电动汽车 安全要求 第3部分:人员触电防护 |
China National Standards shock |
English PDF |
GB/T 30873-2014 |
Refractory materials—Determination of thermal shock resistance 耐火材料 抗热震性试验方法 |
China National Standards shock |
English PDF |
GB/T 30907-2014 |
Rubbershoes―Test method for shock attenuating properties of athletic shoes 胶鞋 运动鞋减震性能试验方法 |
China National Standards shock |
English PDF |
GB/T 30173.2-2014 |
Mechanical vibration and shock―Resilient mounting systems―Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems 机械振动与冲击 弹性安装系统 第2部分:轨道交通系统隔振应用需交换的技术信息 |
China National Standards shock |
English PDF |
GB/T 30575-2014 |
Mechanical vibration and shock―Human exposure―Biodynamic coordinate systems 机械振动与冲击 人体暴露 生物动力学坐标系 |
China National Standards shock |
English PDF |
GB/T 7987-2013 |
Vitreous and porcelain enamels-Determination of resistance to therml shock 搪玻璃层耐温差急变性试验方法 |
China National Standards shock |
English PDF |
GB/T 30173.1-2013 |
Mechanical vibration and shock—Resilient mounting systems—Part 1: Technical information to be exchanged for the application of isolation systems 机械振动与冲击 弹性安装系统 第1部分:用于交换的隔振系统的技术信息 |
China National Standards shock |
English PDF |
GB/T 29716.1-2013 |
Mechanical vibration and shock - Signal processing - Part 1: General introduction 机械振动与冲击 信号处理 第1部分:引论 |
China National Standards shock |
English PDF |
GB/T 29715-2013 |
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts 机械振动与冲击 桥和高架桥动态试验和检测指南 |
China National Standards shock |
English PDF |
GB/T 15168-2013 |
Vibration and shock isolators measuring method for its static and dynamic characteristics 振动与冲击隔离器静、动态性能测试方法 |
China National Standards shock |
English PDF |
GB/T 14123-2012 |
Mechanical shock - Testing machines - Characteristics and performance 机械冲击 试验机 性能特性 |
China National Standards shock |
English PDF |
GB/T 13441.4-2012 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems 机械振动与冲击 人体暴露于全身振动的评价 第4部分:振动和旋转运动对固定导轨运输系统中的乘客及乘务员舒适影响的评价指南 |
China National Standards shock |
English PDF |
GB 16895.21-2011 |
Low-voltage electrical installations - Part 4-41: Protection for safety-Protection against electric shock 低压电气装置 第4-41部分: 安全防护 电击防护 |
China National Standards shock |
English PDF |
GB/T 20485.31-2011 |
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 12085.13-2010 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold 光学和光学仪器 环境试验方法 第13部分:冲击、碰撞或自由跌落与高温、低温综合试验 |
China National Standards shock |
English PDF |
GB/T 20485.15-2010 |
Methods for the calibration of vibration and shock transducers - Part 15: Primary angular vibration calibration by laser interferometry 振动与冲击传感器校准方法 第15部分:激光干涉法角振动绝对校准 |
China National Standards shock |
English PDF |
GB/T 2298-2010 |
Mechanical vibration,shock and condition monitoring - Vocabulary 机械振动、冲击与状态监测 词汇 |
China National Standards shock |
English PDF |
GB/T 23919-2009 |
Tri-wheel vehicles and low-speed goods vehicles - shock absorbers 三轮汽车和低速货车 减振器 |
China National Standards shock |
English PDF |
GB/T 23717.2-2009 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification 机械振动与冲击 装有敏感设备建筑物内的振动与冲击 第2部分:分级 |
China National Standards shock |
English PDF |
GB/T 23717.1-2009 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation 机械振动与冲击 装有敏感设备建筑物内的振动与冲击 第1部分:测量与评价 |
China National Standards shock |
English PDF |
GB/T 23715-2009 |
Vibration and shock generating systems - Vocabulary 振动与冲击发生系统 词汇 |
China National Standards shock |
English PDF |
GB/T 23714-2009 |
Mechanical vibration and shock - Performance parameters for condition monitoring of structures 机械振动与冲击 结构状态监测的性能参数 |
China National Standards shock |
English PDF |
GB/T 14124-2009 |
Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings 机械振动与冲击 建筑物的振动 振动测量及其对建筑物影响的评价指南 |
China National Standards shock |
English PDF |
GB/T 19216.31-2008 |
Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0.6/1 kV 在火焰条件下电缆或光缆的线路完整性试验 第31部分:供火并施加冲击的试验程序和要求 额定电压0.6/1kV及以下电缆 |
China National Standards shock |
English PDF |
GB/T 19216.12-2008 |
Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830℃ 在火焰条件下电缆或光缆的线路完整性试验 第12部分:试验装置 火焰温度不低于830℃的供火并施加冲击 |
China National Standards shock |
English PDF |
GB/T 4797.7-2008 |
Classification of environmental conditions - Environmental conditions of nature - Earthquake vibration and shock 电工电子产品环境条件分类 自然环境条件 地震振动和冲击 |
China National Standards shock |
English PDF |
GB/T 14625.3-2008 |
Test methods for basketball, football, volleyball and handball - Part 3: The determination of resistance to shock 篮球、足球、排球、手球试验方法 第3部分:动态耐冲击试验方法 |
China National Standards shock |
English PDF |
GB/T 11419-2008 |
Vitreous and porcelain enamels - Enamelled cooking utensils - Determination of resistance to thermal shock 搪瓷炊具 耐温急变性测定方法 |
China National Standards shock |
English PDF |
GB/T 14125-2008 |
Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings 机械振动与冲击 振动与冲击对建筑物内敏感设备影响的测量和评价 |
China National Standards shock |
English PDF |
GB/T 13823.20-2008 |
Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods 振动与冲击传感器校准方法 加速度计谐振测试 通用方法 |
China National Standards shock |
English PDF |
GB/T 13823.19-2008 |
Methods for the calibration of vibration and shock pick-ups - Calibration by Earth’s gravitation 振动与冲击传感器的校准方法 地球重力法校准 |
China National Standards shock |
English PDF |
GB/T 13441.2-2008 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 2: Vibration in buildings(1Hz to 80Hz) 机械振动与冲击 人体暴露于全身振动的评价 第2部分:建筑物内的振动(1Hz~80Hz) |
China National Standards shock |
English PDF |
GB/T 3298-2008 |
Standard test method for crazing resistance of domestic ceramic ware by a thermal shock method 日用陶瓷器抗热震性测定方法 |
China National Standards shock |
English PDF |
GB/T 8171-2008 |
Test method for mechanical shock fragility rating of products using packaging cushioning materials 使用缓冲包装材料进行的产品机械冲击脆值试验方法 |
China National Standards shock |
English PDF |
GB/T 17045-2008 |
Protection against electric shock - Common aspects for installation and equipment 电击防护 装置和设备的通用部分 |
China National Standards shock |
English PDF |
GB/T 2900.73-2008 |
Electrotechnical terminology - Earthing and protection against electric shock 电工术语 接地与电击防护 |
China National Standards shock |
English PDF |
GB/T 2423.57-2008 |
Environmental testing for electric and electronic products - Part 2: Tests - Test Ei: shock - Shock response spectrum synthesis 电工电子产品环境试验 第2-81部分: 试验方法 试验Ei: 冲击 冲击响应谱合成 |
China National Standards shock |
English PDF |
GB/T 21563-2008 |
Railway applications - Rolling stock equipment - shock and vibration tests 轨道交通 机车车辆设备 冲击和振动试验 |
China National Standards shock |
English PDF |
GB/T 20485.22-2008 |
Methods for the calibration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第 22部分:冲击比较法校准 |
China National Standards shock |
English PDF |
GB/T 20485.12-2008 |
Methods for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method 振动与冲击传感器校准方法 第12部分:互易法振动绝对校准 |
China National Standards shock |
English PDF |
GB/T 20485.1-2008 |
Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts 振动与冲击传感器校准方法 第1部分: 基本概念 |
China National Standards shock |
English PDF |
GB/T 6579-2007 |
Laborator glassware - Thermal shock and thermal shock endurance - Test methods 实验室玻璃仪器 热冲击和热冲击强度试验方法 |
China National Standards shock |
English PDF |
GB/T 4547-2007 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods 玻璃容器 抗热震性和热震耐久性试验方法 |
China National Standards shock |
English PDF |
GB/T 20485.21-2007 |
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第21部分:振动比较法校准 |
China National Standards shock |
English PDF |
GB/T 20485.13-2007 |
Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry 振动与冲击传感器校准方法 第13部分: 激光干涉法冲击绝对校准 |
China National Standards shock |
English PDF |
GB/T 13441.1-2007 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements 机械振动与冲击 人体暴露于全身振动的评价 第1部分: 一般要求 |
China National Standards shock |
English PDF |
GB/T 20485.11-2006 |
Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry 振动与冲击传感器校准方法 第11部分:激光干涉法振动绝对校准 |
China National Standards shock |
English PDF |
GB/T 11349.3-2006 |
Vibration and shock - Experimental determination of mechanical mobility - Part 3: Measurement using impact excitation 振动与冲击 机械导纳的试验确定 第3部分:冲击激励法 |
China National Standards shock |
English PDF |
GB/T 11349.2-2006 |
Vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter 振动与冲击 机械导纳的试验确定 第2部分:用激振器作单点平动激励测量 |
China National Standards shock |
English PDF |
GB/T 11349.1-2006 |
Vibration and shock - Experimental determination of mechanical mobility - Part 1: Basic definitions and transducers 振动与冲击 机械导纳的试验确定 第1部分:基本定义与传感器 |
China National Standards shock |
English PDF |
GB/T 3810.9-2006 |
Test methods of ceramic tiles Part 9: Determination of resistance to thermal shock 陶瓷砖试验方法 第9部分:抗热震性的测定 |
China National Standards shock |
English PDF |
GB/T 19875-2005 |
Mechanical vibration and shock-Vibration of stationary structures-Specific requirements for quality management in measurement and evaluation of vibration 机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求 |
China National Standards shock |
English PDF |
GB/T 19847-2005 |
Mechanical vibration and shock-Analytical methods of assessing shock resistance of mechanical systems-Information exchange between suppliers and users of analyses 机械振动和冲击 评价机械系统冲击阻抗的分析方法 分析的提供者和使用者之间的信息交换 |
China National Standards shock |
English PDF |
GB/T 19740-2005 |
Mechanical vibration and shock-Free,Mechanical impedance of the human hand-arm system at the driving point 机械振动与冲击 人体手臂系统驱动点的自由机械阻抗 |
China National Standards shock |
English PDF |
GB/T 19739-2005 |
Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system 机械振动与冲击 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法 |
China National Standards shock |
English PDF |
GB/T 15619-2005 |
Mechanical vibration and shock-Human exposure-Vocabulary 机械振动与冲击 人体暴露 词汇 |
China National Standards shock |
English PDF |
GB/T 14412-2005 |
Mechanical vibration and shock-Mechanical mounting of accelerometers 机械振动与冲击 加速度计的机械安装 |
China National Standards shock |
English PDF |
GB 19417-2003 |
Detonator with shock-conducting tube 导爆管雷管 |
China National Standards shock |
English PDF |
GB/T 2423.52-2003 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock 电工电子产品环境试验 第2部分:试验方法 试验77:结构强度与撞击 |
China National Standards shock |
English PDF |
GB/T 18310.9-2003 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-9:Tests--shock 纤维光学互连器件和无源器件 基本试验和测量程序 第2-9部分:试验 冲击 |
China National Standards shock |
English PDF |
GB/T 11287-2000 |
Electrical relays--Part 21:Vibration,shock,bump and seismic tests on measuring relays and protection equipment--Section one:Vibration tests(sinusoidal) 电气继电器 第21部分:量度继电器和保护装置的振动、冲击、碰撞和地震试验 第1篇:振动试验(正弦) |
China National Standards shock |
English PDF |
GB/T 16536-1996 |
Test method for thermal shock resistance of high performance ceramics 工程陶瓷抗热震性试验方法 |
China National Standards shock |
English PDF |
GB/T 16440-1996 |
Vibration and shock--Mechanical driving point impedance of the human body 振动与冲击 人体的机械驱动点阻抗 |
China National Standards shock |
English PDF |
GB/T 13823.17-1996 |
Methods for the calibration of vibration and shock pick-ups--Testing of acoustic sensitivity 振动与冲击传感器的校准方法 声灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 15727-1995 |
Methods for thermal shock test oflaboratory apparatus glass (stick method) 实验室仪器玻璃热冲击试验方法(棒状法) |
China National Standards shock |
English PDF |
GB/T 2423.5-1995 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ea and guidance:shock 电工电子产品环境试验 第二部分:试验方法 试验Ea和导则:冲击 |
China National Standards shock |
English PDF |
GB/T 13823.16-1995 |
Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison 振动与冲击传感器的校准方法 温度响应比较测试法 |
China National Standards shock |
English PDF |
GB/T 13823.15-1995 |
Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法 |
China National Standards shock |
English PDF |
GB/T 13823.14-1995 |
Methods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge 振动与冲击传感器的校准方法 离心机法一次校准 |
China National Standards shock |
English PDF |
GB/T 13823.12-1995 |
Methods for the calibration of vibration and shock pick-ups--Resonance frequencytesting of undamped accelerometers on a steel block 振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试 |
China National Standards shock |
English PDF |
GB/T 13823.9-1994 |
Methods for the calibration of vibration and shock pick-ups--Testing of transverse shock sensitivity 振动与冲击传感器的校准方法 横向冲击灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 14537-1993 |
shock and bump tests on measuringrelays and protection equipment 量度继电器和保护装置的冲击与碰撞试验 |
China National Standards shock |
English PDF |
GB/T 13866-1992 |
shock and vibration measurements--Characteristics to be specified for seismic pick-ups 振动与冲击测量 描述惯性式传感器特性的规定 |
China National Standards shock |
English PDF |
GB/T 13823.6-1992 |
Methods for the calibration of vibration and shock pick-ups--Testing of base strain sensitivity 振动与冲击传感器的校准方法 基座应变灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 13823.5-1992 |
Methods for the calibration of vibration and shock pick-ups--Testing of mounting torque sensitivity 振动与冲击传感器的校准方法 安装力矩灵敏度测试 |
China National Standards shock |
English PDF |
GB/T 13823.4-1992 |
Methods for the calibration of vibration and shock pick-ups--Testing of magnetic field sensitivity 振动与冲击传感器的校准方法 磁灵敏度测试 |
China National Standards shock |
English PDF |
Find out:121Items | To Page of: First -Previous-Next -Last | 1 |