Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43489-2023 |
sintered NdFeB permanent magnets constant damp heat test {译} 烧结钕铁硼永磁体 恒定湿热试验 |
China National Standards sintered |
 English PDF |
| GB/T 16457.2-2023 |
Diamond circular saw blade substrates Part 2: For sintered saw blades {译} 金刚石圆锯片基体 第2部分：用于烧结锯片 |
China National Standards sintered |
English PDF |
| GB/T 5166-2023 |
Determination of elastic modulus of sintered metal materials and cemented carbide {译} 烧结金属材料和硬质合金弹性模量的测定 |
China National Standards sintered |
English PDF |
| GB/T 21944.4-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 4: Burner sleeves {译} 碳化硅特种制品 反应烧结碳化硅窑具 第4部分：烧嘴套 |
China National Standards sintered |
English PDF |
| GB/T 21944.3-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 3: Rollers {译} 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards sintered |
English PDF |
| GB/T 21944.2-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 2: Shaped beams {译} 碳化硅特种制品 反应烧结碳化硅窑具 第2部分：异形梁 |
China National Standards sintered |
English PDF |
| GB/T 19076-2022 |
Specifications for sintered metal materials 烧结金属材料规范 |
China National Standards sintered |
English PDF |
| GB/T 18323-2022 |
Plain bearings sintered bushings Dimensions and tolerances {译} 滑动轴承 烧结轴套 尺寸和公差 |
China National Standards sintered |
English PDF |
| GB/T 42264-2022 |
Technical requirements for air pollutant control facilities in sintered brick and tile industry {译} 烧结砖瓦工业大气污染物治理设施技术要求 |
China National Standards sintered |
English PDF |
| GB/T 40389-2021 |
sintered metal materials, excluding hardmetals—Measurement of surface roughness 烧结金属材料（不包括硬质合金） 表面粗糙度的测定 |
China National Standards sintered |
English PDF |
| GB/T 11270.2-2021 |
Superabrasive products—Diamond circular saw blade—Part 2:sintered saw blades 超硬磨料制品 金刚石圆锯片 第2部分：烧结锯片 |
China National Standards sintered |
English PDF |
| GB/T 41155-2021 |
sintered metal materials,excluding hardmetals—Fatigue test pieces 烧结金属材料（不包括硬质合金） 疲劳试样 |
China National Standards sintered |
English PDF |
| GB/T 40790-2021 |
sintered cerium-based and cerium-rich permanent magnet materials 烧结铈及富铈永磁材料 |
China National Standards sintered |
English PDF |
| GB/T 40792-2021 |
Test method of weight loss of sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁体失重试验方法 |
China National Standards sintered |
English PDF |
| GB/T 40793-2021 |
Nonmetallic coatings for sintered neodymium iron boron permanent magnets 烧结钕铁硼表面涂层 |
China National Standards sintered |
English PDF |
| GB/T 38981-2020 |
sintered-metal injection-moulded materials—Specifications 烧结金属注射成形材料 规范 |
China National Standards sintered |
English PDF |
| GB/T 7964-2020 |
sintered metal materials(excluding hardmetal)--Tension testing at room temperature 烧结金属材料(不包括硬质合金) 室温拉伸试验 |
China National Standards sintered |
English PDF |
| GB/T 38516-2020 |
Permeable sintered metal materials—Determination of average pore size of medium flow 可渗透性烧结金属材料 中流量平均孔径的测定 |
China National Standards sintered |
English PDF |
| GB/T 6887-2019 |
sintered metal filter elements 烧结金属过滤元件 |
China National Standards sintered |
English PDF |
| GB/T 6525-2019 |
Determination of compression strength for sintered metal materials at room temperature 烧结金属材料室温压缩强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 50528-2018 |
sintered brick factory energy-saving design standards 烧结砖瓦工厂节能设计标准 |
China National Standards sintered |
English PDF |
| GB/T 35057-2018 |
Technical specification of waste heat utilization in coal gangue sintered brick tunnel kiln 煤矸石烧结砖隧道窑余热利用技术规范 |
China National Standards sintered |
English PDF |
| GB/T 5167-2018 |
sintered metal materials and hardmetals—Determination of electrical resistivity 烧结金属材料和硬质合金 电阻率的测定 |
China National Standards sintered |
English PDF |
| GB/T 36495-2018 |
Test method for physical properties of raw material of sintered brick and tile 烧结砖瓦原料物理性能试验方法 |
China National Standards sintered |
English PDF |
| GB/T 34905-2017 |
sintered metal materials—Determination of the level of cleanliness of powder-metallurgy parts 烧结金属材料 粉末冶金零部件清洁度的测定 |
China National Standards sintered |
English PDF |
| GB/T 13560-2017 |
sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁材料 |
China National Standards sintered |
English PDF |
| GB/T 34491-2017 |
Coatings for sintered neodymium iron boron permanent magnets 烧结钕铁硼表面镀层 |
China National Standards sintered |
English PDF |
| GB/T 34490-2017 |
Recycled sintered neodymium iron boron permanent magnets 再生烧结钕铁硼永磁材料 |
China National Standards sintered |
English PDF |
| GB/T 34643-2017 |
sintered metal porous materials—Determination of air filter permeability 烧结金属多孔材料 气体过滤性能的测定 |
China National Standards sintered |
English PDF |
| GB/T 34646-2017 |
sintered metal membrane filter materials and elements 烧结金属膜过滤材料及元件 |
China National Standards sintered |
English PDF |
| GB/T 6886-2017 |
sintered stainless steel filter elements 烧结不锈钢过滤元件 |
China National Standards sintered |
English PDF |
| GB/T 5318-2017 |
sintered metal materials（excluding hardmetals） without notch impact test piece 烧结金属材料（不包括硬质合金）无切口冲击试样 |
China National Standards sintered |
English PDF |
| GB/T 9097-2016 |
sintered metal materials，excluding hardmetals—Determination of apparent hardness and mincrohardness 烧结金属材料（不包括硬质合金） 表观硬度和显微硬度的测定 |
China National Standards sintered |
English PDF |
| GB/T 7963-2015 |
sintered metal materials, excluding hardmetals—Tensile test pieces 烧结金属材料（不包括硬质合金） 拉伸试样 |
China National Standards sintered |
English PDF |
| GB/T 3850-2015 |
Impermeable sintered metal materials and hardmetals—Determination of density 致密烧结金属材料与硬质合金 密度测定方法 |
China National Standards sintered |
English PDF |
| GB/T 31909-2015 |
Permeable sintered metal materials—Determination of the air permeability 可渗透性烧结金属材料 透气度的测定 |
China National Standards sintered |
English PDF |
| GB/T 5250-2014 |
Permeable sintered metal materials―Determination of fluid permeability 可渗透性烧结金属材料 流体渗透性的测定 |
China National Standards sintered |
English PDF |
| GB/T 30018-2013 |
sintered decorative plates 烧结装饰板 |
China National Standards sintered |
English PDF |
| GB/T 5249-2013 |
Permeable sintered metal materials - Determination of bubble test pore size 可渗透性烧结金属材料 气泡试验孔径的测定 |
China National Standards sintered |
English PDF |
| GB/T 25863-2010 |
Stainless steel sintered metal mesh materials and components 不锈钢烧结金属丝网多孔材料及其元件 |
China National Standards sintered |
English PDF |
| GB/T 25452-2010 |
Specification for sintered natural uranium dioxide pellets for PHWR plant 重水堆核电厂燃料元件用烧结天然二氧化铀芯块技术条件 |
China National Standards sintered |
English PDF |
| GB/T 24296-2009 |
Standard specifications for sintered soft magnetic materials 烧结软磁材料技术条件 |
China National Standards sintered |
English PDF |
| GB/T 13560-2009 |
Materials for sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁材料 |
China National Standards sintered |
English PDF |
| GB/T 9095-2008 |
sintered ferrous materials，carburized or carbonitrided - Determination and verification of case-harding depth 烧结铁基材料渗碳或碳氮共渗层深度的测定及其验证 |
China National Standards sintered |
English PDF |
| GB/T 6804-2008 |
sintered mital bushes - Determination of radial crushing strength 烧结金属衬套 径向压溃强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 10430-2008 |
Inspection method for bonding ability of sintered friction elements 烧结金属摩擦片粘结性能检验方法 |
China National Standards sintered |
English PDF |
| GB/T 10266-2008 |
Specification for sintered uranium dioxide pellets 烧结二氧化铀芯块技术条件 |
China National Standards sintered |
English PDF |
| GB/T 6886-2008 |
sintered stainless steel filter elements 烧结不锈钢过滤元件 |
China National Standards sintered |
English PDF |
| GB/T 2273-2007 |
sintered magnesia 烧结镁砂 |
China National Standards sintered |
English PDF |
| GB/T 6887-2007 |
sintered metal filter elements 烧结金属过滤元件 |
China National Standards sintered |
English PDF |
| GB/T 5163-2006 |
sintered metal materials，excluding hardmetals - Permeable sintered metal materials - Determination of density，oil content，and open porosity 烧结金属材料（不包括硬质合金） 可渗性烧结金属材料 密度、含油率和开孔率的测定 |
China National Standards sintered |
English PDF |
| GB/T 19076-2003 |
sintered metal materials--Specifications 烧结金属材料规范 |
China National Standards sintered |
English PDF |
| GB/T 11270.2-2002 |
Abrasive products--Diamond circular saw blade--Part 2:sintered saw blades 超硬磨料制品 金刚石圆锯片 第2部分:烧结锯片 |
China National Standards sintered |
English PDF |
| GB/T 5319-2002 |
sintered metal materials，excluding hardmetals--Determination of transverse rupture strength 烧结金属材料(不包括硬质合金) 横向断裂强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 9097.1-2002 |
sintered metal materials，excluding hardmetals--Determination of apparent hardness--Part 1:Materials of essentially uniform section hardness 烧结金属材料(不包括硬质合金)表观硬度的测定 第一部分:截面硬度基本均匀的材料 |
China National Standards sintered |
English PDF |
| GB/T 9096-2002 |
sintered metal materials，excluding hardmetals--Impact test method 烧结金属材料(不包括硬质合金)冲击试验方法 |
China National Standards sintered |
English PDF |
| GB/T 10425-2002 |
sintered metal friction materials--Determination of apparent hardness 烧结金属摩擦材料 表观硬度的测定 |
China National Standards sintered |
English PDF |
| GB/T 10424-2002 |
sintered metal friction materials--Determination of compressive strength 烧结金属摩擦材料 抗压强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 10423-2002 |
sintered metal friction materials--Determination of tensile strength 烧结金属摩擦材料 抗拉强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 10422-2002 |
sintered metal friction materials--Determination of transverse rupture strength 烧结金属摩擦材料 横向断裂强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 10421-2002 |
sintered metal friction materials--Determination of density 烧结金属摩擦材料 密度的测定 |
China National Standards sintered |
English PDF |
| GB/T 18323-2001 |
Plain bearings--sintered bushes--Dimensions and tolerances 滑动轴承 烧结轴套的尺寸和公差 |
China National Standards sintered |
English PDF |
| GB/T 5166-1998 |
sintered metal materials and hardmetals--Determination of Young’s modulus 烧结金属材料和硬质合金弹性模量测定 |
China National Standards sintered |
English PDF |
| GB/T 6883-1995 |
Wire，bar or tube drawing dies--As sintered pellets of hardmetal 线、棒和管拉模用硬质合金模坯 |
China National Standards sintered |
English PDF |
| GB/T 13827-1992 |
Standard specification for sintered austenitic stainless steel structural part 烧结奥氏体不锈钢结构零件技术条件 |
China National Standards sintered |
English PDF |
| GB/T 11415-1989 |
Laboratory sintered (fritted)filters--Porosity grading， classification and designation 实验室烧结(多孔)过滤器 孔径、分级和牌号 |
China National Standards sintered |
English PDF |
| GB/T 7964-1987 |
sintered metal materials (excluding hardmetal)--Tension testing at room temperature 烧结金属材料(不包括硬质合金) 室温拉伸试验 |
China National Standards sintered |
English PDF |
| GB/T 7963-1987 |
sintered metal materials (excluding hardmetal)--Tensile test pieces 烧结金属材料(不包括硬质合金) 拉伸试样 |
China National Standards sintered |
English PDF |
| GB/T 6525-1986 |
sintered metal materials--Determinationof compression strength at room temperature 烧结金属材料室温压缩强度的测定 |
China National Standards sintered |
English PDF |
| GB/T 5318-1985 |
sintered metals materials，excluding hard metals--Unnotched impact test piece 烧结金属材料 (不包括硬质合金) 无切口冲击试样 |
China National Standards sintered |
English PDF |
| GB/T 5167-1985 |
sintered metal materials and hardmetals--Determination of electrical resistivity 烧结金属材料和硬质合金电阻率的测定 |
China National Standards sintered |
English PDF |
| GB/T 4197-1984 |
Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 |
China National Standards sintered |
English PDF |
| GB/T 3850-1983 |
Impermeable sintered metal materials and hardmetals--Determination of density 致密烧结金属材料与硬质合金密度测定方法 |
China National Standards sintered |
English PDF |
| Find out:73Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
