Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB-16994.6-2024 |
Safety requirements for port operations-Part 6: solid bulk dangerous goods {译} 港口作业安全要求-第6部分：固体散装危险货物 |
China National Standards solid |
 English PDF |
| GB/T 13181-2024 |
solid scintillator performance measurement method {译} 固体闪烁体性能测量方法 |
China National Standards solid |
English PDF |
| GB/T 44075-2024 |
Nanotechnology-surface enhanced Raman solid-phase substrate uniformity measurement-Raman imaging analysis method {译} 纳米技术-表面增强拉曼固相基片均匀性测量-拉曼成像分析法 |
China National Standards solid |
English PDF |
| GB/Z 43963-2024 |
Guide to determining the values of electrical clearances, creepage distances and solid insulation requirements for equipment with rated voltages above 1000V to 2000V AC and above 1500V to 3000V DC {译} 确定额定电压在交流1000V以上至2000V，直流1500V以上至3000V间设备的电气间隙、爬电距离的数值以及对固体绝缘要求的指南 |
China National Standards solid |
English PDF |
| GB/T 21711.201-2024 |
Technical specifications for the coordinated disposal of solid waste in cement kilns {译} 基础机电继电器-第2-1部分：可靠性-B10值验证程序 |
China National Standards solid |
English PDF |
| GB/T 21617-2023 |
Dangerous Goods solid Oxidizing Test Methods {译} 危险品 固体氧化性试验方法 |
China National Standards solid |
English PDF |
| GB/T 43220-2023 |
Method for determination of arsenic in solid biomass fuels {译} 固体生物质燃料中砷的测定方法 |
China National Standards solid |
English PDF |
| GB/T 43139-2023 |
Density testing of cast aluminum alloy liquid reduced pressure solidification samples {译} 铸造铝合金液减压凝固试样密度检测 |
China National Standards solid |
English PDF |
| GB/T 21951-2023 |
Inlaid or solid cubic boron nitride insert styles and sizes {译} 镶或整体立方氮化硼刀片 型式和尺寸 |
China National Standards solid |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards solid |
English PDF |
| GB/T 10671-2023 |
Test method for specific optical density of smoke produced by solid materials {译} 固体材料产烟的比光密度试验方法 |
China National Standards solid |
English PDF |
| GB/Z 42540-2023 |
Technical Guidelines for Containment of Pharmaceutical Equipment solid Preparations {译} 制药装备密闭性技术指南 固体制剂 |
China National Standards solid |
English PDF |
| GB/T 8152.11-2023 |
Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content - Atomic fluorescence spectrometry and solid injection direct method {译} 铅精矿化学分析方法 第11部分：汞含量的测定 原子荧光光谱法和固体进样直接法 |
China National Standards solid |
English PDF |
| GB/T 42741-2023 |
Method for measuring electromagnetic parameters of solid materials using the free-space method {译} 固体材料使用自由空间法的电磁参数测量方法 |
China National Standards solid |
English PDF |
| GB/T 13277.8-2023 |
Compressed air - Part 8: Methods of measurement of mass concentration of solid particles {译} 压缩空气 第8部分：固体颗粒质量浓度测量方法 |
China National Standards solid |
English PDF |
| GB/T 21144-2023 |
concrete solid brick {译} 混凝土实心砖 |
China National Standards solid |
English PDF |
| GB/T 20822-2007 |
solid-liquid method liquor "No. 1 Amendment" {译} 固液法白酒《第1号修改单》 |
China National Standards solid |
English PDF |
| GB/T 4207-2022 |
Method for determination of tracking resistance index and relative tracking index of solid insulating materials {译} 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards solid |
English PDF |
| GB/T 42170-2022 |
Footwear - Test methods for hollow and solid heels with heels - Heel adhesion {译} 鞋类 带跟面的空心和实心鞋跟试验方法 跟面结合力 |
China National Standards solid |
English PDF |
| GB/T 42255-2022 |
General specification for stainless steel solid rivets for aerospace {译} 航空航天用不锈钢实心铆钉通用规范 |
China National Standards solid |
English PDF |
| GB/T 41876-2022 |
Technical specification for bonded solid tires {译} 粘结式实心轮胎技术规范 |
China National Standards solid |
English PDF |
| GB/T 16623-2022 |
Technical specifications for press-fit solid tires {译} 压配式实心轮胎技术规范 |
China National Standards solid |
English PDF |
| GB/T 10824-2022 |
Pneumatic tire rim solid tire technical specification {译} 充气轮胎轮辋实心轮胎技术规范 |
China National Standards solid |
English PDF |
| GB/T 16622-2022 |
Press-fit solid tire specifications, dimensions and loads {译} 压配式实心轮胎规格、尺寸与负荷 |
China National Standards solid |
English PDF |
| GB 40558-2021 |
The safety requirements for marine shipping solid bulk cargoes 固体散装货物海运安全技术要求 |
China National Standards solid |
English PDF |
| GB 19268-2021 |
solid cyanide package 固体氰化物包装 |
China National Standards solid |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards solid |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards solid |
English PDF |
| GB/T 40426.1-2021 |
Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications 塑料制品 装饰性实体面材 第1部分：分类和规范 |
China National Standards solid |
English PDF |
| GB 40558-2021 |
The safety requirements for marine shipping solid bulk cargoes 固体散装货物海运安全技术要求 |
China National Standards solid |
English PDF |
| GB/T 40244-2021 |
Chemicals - Liquid or solid identification - Fluidity test method 化学品 固液鉴别 流动性测定法 |
China National Standards solid |
English PDF |
| GB/T 31838.7-2021 |
solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率 |
China National Standards solid |
English PDF |
| GB/T 31838.6-2021 |
solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz～10 MHz) 固体绝缘材料 介电和电阻特性 第6部分：介电特性（AC方法） 相对介电常数和介质损耗因数（频率0.1Hz~10MHz） |
China National Standards solid |
English PDF |
| GB/T 31838.5-2021 |
solid insulating materials - Dielectric and resistive properties - Part 5: Resistive properties(DC method) - Volume resistance and volume resistivity of impregnation and coating materials 固体绝缘材料 介电和电阻特性 第5部分：电阻特性(DC方法) 浸渍和涂层材料的体积电阻和体积电阻率 |
China National Standards solid |
English PDF |
| GB 19268-2021 |
solid cyanide package 固体氰化物包装 |
China National Standards solid |
English PDF |
| GB/T 39742-2021 |
Plain bearings—Aluminium alloys for solid bearings 滑动轴承 单层滑动轴承用铝基铸造合金 |
China National Standards solid |
English PDF |
| GB/T 41112-2021 |
solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys 镁及镁合金焊丝 |
China National Standards solid |
English PDF |
| GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分：药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards solid |
English PDF |
| GB/T 41104.2-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定 |
China National Standards solid |
English PDF |
| GB/T 41104.1-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and performance requirements 实心和药芯软钎料丝? 规范和试验方法? 第1部分：分类和性能要求 |
China National Standards solid |
English PDF |
| GB/T 2449.1-2021 |
Sulphur for industrial use—Part 1: solid product 工业硫磺 第1部分：固体产品 |
China National Standards solid |
English PDF |
| GB/T 41015-2021 |
Technical requirements for solid waste vitrification product 固体废物玻璃化处理产物技术要求 |
China National Standards solid |
English PDF |
| GB/T 20882.3-2021 |
Quality requirements for starch sugar—Part 3:Crystalline fructose and solid fructose-glucose 淀粉糖质量要求 第3部分：结晶果糖、固体果葡糖 |
China National Standards solid |
English PDF |
| GB/T 41012-2021 |
Technical specifications for collection and recovery of non-ferrous metal contained solid waste 含有色金属固体废物回收利用技术规范 |
China National Standards solid |
English PDF |
| GB/T 40809-2021 |
Casting aluminum alloys—Process specification for semisolid rheo-diecasting forming 铸造铝合金 半固态流变压铸成形工艺规范 |
China National Standards solid |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards solid |
English PDF |
| GB/T 8601-2021 |
Forged and rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards solid |
English PDF |
| GB 18599-2020 |
Standard for pollution control on the non-hazardous industrial solid waste storage and landfill 一般工业固体废物贮存和填埋污染控制标准 |
China National Standards solid |
English PDF |
| GB/T 51435-2021 |
Technical standard for rural solid waste collection transportation and treatment 农村生活垃圾收运和处理技术标准 |
China National Standards solid |
English PDF |
| GB/T 51403-2021 |
Technical standard for liner system of municipal solid waste sanitary landfill 生活垃圾卫生填埋场防渗系统工程技术标准 |
China National Standards solid |
English PDF |
| GB 55012-2021 |
Project code for engineering of treatment and disposal of municipal solid wastes 生活垃圾处理处置工程项目规范 |
China National Standards solid |
English PDF |
| GB/T 39197-2020 |
Principle and requirement for material flow data collection of general solid waste 一般固体废物物质流数据采集原则和要求 |
China National Standards solid |
English PDF |
| GB/T 39198-2020 |
Classification and code for general solid waste 一般固体废物分类与代码 |
China National Standards solid |
English PDF |
| GB/T 8151.23-2020 |
Methods for chemical analysis of zinc concentrates—Part 23: Determination of mercury content—solid sampling and direct mercury analysis method 锌精矿化学分析方法 第23部分：汞含量的测定 固体进样直接法 |
China National Standards solid |
English PDF |
| GB/T 22578.3-2020 |
Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors 电气绝缘系统(EIS) 液体和固体组件的热评定 第3部分：密封式电动机-压缩机 |
China National Standards solid |
English PDF |
| GB/T 39527-2020 |
Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis 实体面材产品中钙、铝、硅元素含量的测定 化学分析法 |
China National Standards solid |
English PDF |
| GB/T 39431-2020 |
Plain bearings—Bearings containing dispersed solid lubricants 滑动轴承 含有分散固体润滑剂轴承 |
China National Standards solid |
English PDF |
| GB/T 39359-2020 |
Integrating sphere method for the test of liquid/solid suspended photocatalytic hydrogen production reaction 积分球法测量悬浮式液固光催化制氢反应 |
China National Standards solid |
English PDF |
| GB/T 39338-2020 |
Technical requirements of solid-filling in fully-mechanized coal mining 综合机械化固体充填采煤技术要求 |
China National Standards solid |
English PDF |
| GB/T 20323-2020 |
Milling cutters designation —Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards solid |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards solid |
English PDF |
| GB/T 38432-2019 |
Particle—Gas-solid reaction measurement—Micro fluidized bed method 颗粒 气固反应测定 微型流化床法 |
China National Standards solid |
English PDF |
| GB/T 38351-2019 |
Specifications for recycling and disposal of solid waste from manufacturing process of rubber shoes and sports footwear 胶鞋、运动鞋制造过程中固体废弃物回收处理规范 |
China National Standards solid |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards solid |
English PDF |
| GB/T 37977.23-2019 |
Electrostatics—Part 2-3：Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation 静电学 第2-3部分：防静电固体平面材料电阻和电阻率的测试方法 |
China National Standards solid |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—Preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards solid |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—Preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards solid |
English PDF |
| GB/T 2294-2019 |
Determination of softening point in solid products of coal carbonization 焦化固体类产品软化点测定方法 |
China National Standards solid |
English PDF |
| GB/T 31838.4-2019 |
solid insulating materials—Dielectric and resistive properties—Part 4: Resistive properties (DC methods)—Insulation resistance 固体绝缘材料 介电和电阻特性 第4部分：电阻特性(DC方法) 绝缘电阻 |
China National Standards solid |
English PDF |
| GB/T 31838.3-2019 |
solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity 固体绝缘材料 介电和电阻特性 第3部分：电阻特性(DC方法) 表面电阻和表面电阻率 |
China National Standards solid |
English PDF |
| GB/T 31838.2-2019 |
solid insulating materials—Dielectric and resistive properties—Part 2: Resistive properties (DC methods)—Volume resistance and volume resistivity 固体绝缘材料 介电和电阻特性 第2部分：电阻特性(DC方法) 体积电阻和体积电阻率 |
China National Standards solid |
English PDF |
| GB/T 37517-2019 |
Animal and vegetable fats and oils—Determination of solid fat content by pulsed NMR—Indirect method 动植物油脂 脉冲核磁共振法测定固体脂肪含量 间接法 |
China National Standards solid |
English PDF |
| GB/T 510-2018 |
Determination of solidification point for petroleum products 石油产品凝点测定法 |
China National Standards solid |
English PDF |
| GB/T 37171-2018 |
Specification and test methods for bronze plate containing diamond-shaped solid lubricant 含有菱形固体润滑剂的青铜板材技术要求和检验方法 |
China National Standards solid |
English PDF |
| GB/T 25121.2-2018 |
Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 2: Aluminium electrolytic capacitors with non-solid electrolyte 轨道交通-机车车辆设备-电力电子电容器-第2部分：非固体电解质铝电解电容器 |
China National Standards solid |
English PDF |
| GB/T 36938-2018 |
Textile machinery and accessories—Strips for water jet solidification 纺织机械与附件-水刺机用水射流板 |
China National Standards solid |
English PDF |
| GB 12711-2018 |
Standard of safety for low and intermediate level solid radioactive waste packages 低、中水平放射性固体废物包安全标准 |
China National Standards solid |
English PDF |
| GB 36900.1-2018 |
Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive solid Wastes 低、中水平放射性废物高完整性容器-球墨铸铁容器 |
China National Standards solid |
English PDF |
| GB 36900.3-2018 |
Cross Linked High Density Polyethene High Integrity Container for Low-and-intermediate level radioactive solid wastes 低、中水平放射性废物高完整性容器-交联高密度聚乙烯容器 |
China National Standards solid |
English PDF |
| GB 36900.2-2018 |
Concrete High Integrity Container for Low-and-Intermediate Level—Radioactive solid Wastes 低、中水平放射性废物高完整性容器-混凝土容器 |
China National Standards solid |
English PDF |
| GB 9132-2018 |
Safety regulations for near-surface disposal of low- and medium-level radioactive solid wastes 低、中水平放射性固体废物近地表处置安全规定 |
China National Standards solid |
English PDF |
| GB/T 35017-2018 |
Continuous handing equipment - Bulk solids Chassification, Symbol, Performance and Test methods 连续搬运设备 散状物料分类、符号、性能及测试方法 |
China National Standards solid |
English PDF |
| GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第26部分：分规范 导电高分子固体电解质铝固定电容器 |
China National Standards solid |
English PDF |
| GB/T 36512-2018 |
General requirements for solid-state remote power controllers of aircraft 飞机固态远程功率控制器通用要求 |
China National Standards solid |
English PDF |
| GB/T 6346.2601-2018 |
Fixed capacitors for use in electronic equipment—Part 26-1:Blank detail specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte—Assessment level EZ 电子设备用固定电容器 第26-1部分：空白详细规范 导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards solid |
English PDF |
| GB/T 36355-2018 |
Information technology—Test method of solid state disk 信息技术 固态盘测试方法 |
China National Standards solid |
English PDF |
| GB/T 3884.20-2018 |
Methods for chemical analysis of copper concentrates—Part 20:Determination of mercury content—solid sampling and direct mercury analysis method 铜精矿化学分析方法 第20部分：汞量的测定 固体进样直接法 |
China National Standards solid |
English PDF |
| GB/T 36640-2018 |
solid-state relay 固体继电器 |
China National Standards solid |
English PDF |
| GB/T 15036.1-2018 |
solid wood flooring—Part 1:Technical requirements 实木地板 第1部分：技术要求 |
China National Standards solid |
English PDF |
| GB/T 15036.2-2018 |
solid wood flooring—Part 2:Examination methods 实木地板 第2部分：检验方法 |
China National Standards solid |
English PDF |
| GB/T 35984-2018 |
Determination of total carbon, combustible carbon and carbonate carbon in solid residues from coal and coke 煤和焦炭的固体残余物中全碳、可燃碳和碳酸盐碳的测定方法 |
China National Standards solid |
English PDF |
| GB/T 35924-2018 |
Determination of moisture in solid chemical products－Thermogravimetry method 固体化工产品中水分含量的测定 热重法 |
China National Standards solid |
English PDF |
| GB/T 12470-2018 |
solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels 埋弧焊用热强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards solid |
English PDF |
| GB/T 36034-2018 |
solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high strength steels 埋弧焊用高强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards solid |
English PDF |
| GB/T 17854-2018 |
solid wire electrodes /flux combinations for submerged arc welding of stainless steels 埋弧焊用不锈钢焊丝-焊剂组合分类要求 |
China National Standards solid |
English PDF |
| GB/T 18798.2-2018 |
Instant tea in solid form—Part 2: Determination of total ash 固态速溶茶 第2部分：总灰分测定 |
China National Standards solid |
English PDF |
| GB/T 5293-2018 |
solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels 埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards solid |
English PDF |
| GB/T 35812-2018 |
Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment 林业生物质原料分析方法 预处理后不溶固体含量测定 |
China National Standards solid |
English PDF |
| GB/T 35905-2018 |
Test methods for biomass—Determination of total solids in biomass 林业生物质原料分析方法 总固体含量测定 |
China National Standards solid |
English PDF |
| GB/T 35913-2018 |
Technical requirements of solid wood flooring for ground with heating system 地采暖用实木地板技术要求 |
China National Standards solid |
English PDF |
| GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25-1部分：空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards solid |
English PDF |
| GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25部分：分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards solid |
English PDF |
| GB/T 36135-2018 |
General technical specification for mobile horizontal municipal solid waste compactor 移动水平式生活垃圾压缩机通用技术条件 |
China National Standards solid |
English PDF |
| GB/T 34911-2017 |
Terminology on comprehensive utilization of industrial solid wastes 工业固体废物综合利用术语 |
China National Standards solid |
English PDF |
| GB/T 34939.1-2017 |
D.C.±800kV composite post insulator—Part 1: Composite post insulator with resin impregnated glass fibers solid core ±800kV直流支柱复合绝缘子 第1部分：环氧玻璃纤维实心芯体复合绝缘子 |
China National Standards solid |
English PDF |
| GB/T 18798.1-2017 |
Instant tea in solid form—Part 1: Sampling 固态速溶茶 第1部分：取样 |
China National Standards solid |
English PDF |
| GB/T 34743-2017 |
Oak solid wood flooring 栎木实木地板 |
China National Standards solid |
English PDF |
| GB/T 34552-2017 |
Municipal solid waste fluidized bed incineration boiler 生活垃圾流化床焚烧锅炉 |
China National Standards solid |
English PDF |
| GB/T 18772-2017 |
Technical requirement for environmental monitory on municipal solid waste sanitary landfill 生活垃圾卫生填埋场环境监测技术要求 |
China National Standards solid |
English PDF |
| GB/T 34582-2017 |
Single cell and stack performance test methods for solid oxide fuel cells (SOFC) 固体氧化物燃料电池单电池和电池堆性能试验方法 |
China National Standards solid |
English PDF |
| GB/T 19587-2017 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards solid |
English PDF |
| GB/T 33964-2017 |
Wire rods for welding solid electrodes of atmospheric corrosion resisting steels 耐候钢实心焊丝用钢盘条 |
China National Standards solid |
English PDF |
| GB/T 33907-2017 |
Electrolytic solid moisture meter 电解法固体水分测量仪 |
China National Standards solid |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards solid |
English PDF |
| GB/T 33584.5-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 5: Determination of dissolved solid 海水冷却水质要求及分析检测方法 第5部分：溶解固形物的测定 |
China National Standards solid |
English PDF |
| GB 51220-2017 |
Technical code for municipal solid waste sanitary landfill closure 生活垃圾卫生填埋场封场技术规范 |
China National Standards solid |
English PDF |
| GB/T 22578.1-2017 |
Electrical insulation systems (EIS)—Thermal evaluaion of combined liquid and solid components—Part 1: General requiremnts 电气绝缘系统（EIS） 液体和固体组件的热评定 第1部分：通用要求 |
China National Standards solid |
English PDF |
| GB/T 35679-2017 |
Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide 固体材料微波频段使用波导装置的电磁参数测量方法 |
China National Standards solid |
English PDF |
| GB/T 22391-2017 |
Test method of endurance for solid tyres—Drum method 实心轮胎耐久性能试验方法 转鼓法 |
China National Standards solid |
English PDF |
| GB/T 8298-2017 |
Latex,rubber—Determination of total solids content 胶乳 总固体含量的测定 |
China National Standards solid |
English PDF |
| GB/T 22578.2-2017 |
Electrical insulation system(EIS)—Thermal evaluation of combined liquid and solid components—Part 2: Simplified test 电气绝缘系统(EIS) 液体和固体组件的热评定 第2部分：简化试验 |
China National Standards solid |
English PDF |
| GB 16487.3-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Wood and wood articles wastes 进口可用作原料的固体废物环境保护控制标准—木、木制品废料 |
China National Standards solid |
English PDF |
| GB 16487.10-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Metal and electrical appliance scraps 进口可用作原料的固体废物环境保护控制标准—废五金电器 |
China National Standards solid |
English PDF |
| GB 16487.11-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Vessels and other floating structures for breaking up 进口可用作原料的固体废物环境保护控制标准—供拆卸的船舶及其他浮动结构体 |
China National Standards solid |
English PDF |
| GB 16487.13-2017 |
Environmental protection control standard for imported solid wastes as raw materials—compressed piece of scrap automobile 进口可用作原料的固体废物环境保护控制标准—废汽车压件 |
China National Standards solid |
English PDF |
| GB 16487.2-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Smelt slag 进口可用作原料的固体废物环境保护控制标准—冶炼渣 |
China National Standards solid |
English PDF |
| GB 16487.6-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of iron and steel 进口可用作原料的固体废物环境保护控制标准—废钢铁 |
China National Standards solid |
English PDF |
| GB 16487.7-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Nonferrous metal scraps 进口可用作原料的固体废物环境保护控制标准—废有色金属 |
China National Standards solid |
English PDF |
| GB 16487.9-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste wires and cables 进口可用作原料的固体废物环境保护控制标准—废电线电缆 |
China National Standards solid |
English PDF |
| GB 16487.12-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of plastics 进口可用作原料的固体废物环境保护控制标准—废塑料 |
China National Standards solid |
English PDF |
| GB 16487.4-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of paper or paperboard 进口可用作原料的固体废物环境保护控制标准—废纸或纸板 |
China National Standards solid |
English PDF |
| GB 16487.8-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste electric motors 进口可用作原料的固体废物环境保护控制标准—废电机 |
China National Standards solid |
English PDF |
| GB 34330-2017 |
Identification standards for solid wastes General rules 固体废物鉴别标准—通则 |
China National Standards solid |
English PDF |
| GB/T 33444-2016 |
Specification for exploration of solid mineral resources+(No.1 modification sheet)
固体矿产勘查工作规范+(第1号修改单) |
China National Standards solid |
English PDF |
| GB/T 32328-2015 |
Quality and environment safety evaluation guidelines for integrated utilization product of industrial solid waste 工业固体废物综合利用产品环境与质量安全评价技术导则 |
China National Standards solid |
English PDF |
| GB/T 32326-2015 |
Assessment guidelines for integrated utilization technology of industrial solid waste 工业固体废物综合利用技术评价导则 |
China National Standards solid |
English PDF |
| GB/T 13277.4-2015 |
Compressed air—Part 4: Test methods for solid particle content 压缩空气 第4部分：固体颗粒测量方法 |
China National Standards solid |
English PDF |
| GB/T 32384-2015 |
Standard test method for separation and determination of aromatic fractions in middle distillates—solid-phase extraction and gas chromatographic method 中间馏分中芳烃组分的分离和测定 固相萃取-气相色谱法 |
China National Standards solid |
English PDF |
| GB/T 32226-2015 |
Specific solid enzyme (ALD, TIM, GDH)reagent for determination of fructose diphosphate (FDP) 果糖二磷酸钠（FDP）含量测定用固体复合酶（ALD、TIM、GDH）试剂 |
China National Standards solid |
English PDF |
| GB 1886.86-2015 |
National Food Safety Standard-Thorn cloud of solid plastic 食品安全国家标准 食品添加剂 刺云实胶 |
China National Standards solid |
English PDF |
| GB/T 10297-2015 |
Test method for thermal conductivity of nonmetal solid materials—hot-wire method 非金属固体材料导热系数的测定 热线法 |
China National Standards solid |
English PDF |
| GB/T 31949-2015 |
Manganese ores—Determination of mercury content—solid sampling and direct mercury analysis method 锰矿石 汞含量的测定 固体进样直接测定法 |
China National Standards solid |
English PDF |
| GB/T 31948-2015 |
Chromium ores—Determination of mercury content— solid sampling and direct mercury analysis method 铬矿石 汞含量的测定 固体进样直接测定法 |
China National Standards solid |
English PDF |
| GB/T 31947-2015 |
Iron ores—Determination of mercury content—solid sampling and direct mercury analysis method 铁矿石 汞含量的测定 固体进样直接测定法 |
China National Standards solid |
English PDF |
| GB 51118-2015 |
Technical code for drainage-consolidation of tailings embankment 尾矿堆积坝排渗加固工程技术规范 |
China National Standards solid |
English PDF |
| GB 51115-2015 |
Code for design of solid-state polycondensation plant 固相缩聚工厂设计规范 |
China National Standards solid |
English PDF |
| GB/T 6346.3-2015 |
Fixed capacitors for use in electronic equipment—Part 3: Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte 电子设备用固定电容器 第3部分：分规范 表面安装MnO2固体电解质钽固定电容器 |
China National Standards solid |
English PDF |
| GB/T 6346.301-2015 |
Fixed capacitors for use in electronic equipment—Part 3-1: Blank detail specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte—Assessment level EZ 电子设备用固定电容器 第3-1部分：空白详细规范 表面安装MnO2固体电解质钽固定电容器 评定水平EZ |
China National Standards solid |
English PDF |
| GB/T 31857-2015 |
Classification of solid chemical waste 废弃固体化学品分类规范 |
China National Standards solid |
English PDF |
| GB/T 31838.1-2015 |
solid insulating materials—Dielectric and resistive properties—Part 1: General 固体绝缘材料 介电和电阻特性 第1部分：总则 |
China National Standards solid |
English PDF |
| GB/T 10580-2015 |
Standard conditions for use prior to and during the testing of solid electrical insulating materials 固体绝缘材料在试验前和试验时采用的标准条件 |
China National Standards solid |
English PDF |
| GB/T 31745-2015 |
Wear-resisting varnished solid wood flooring 高耐磨漆饰实木地板 |
China National Standards solid |
English PDF |
| GB/T 31743-2015 |
Animal and vegetable fats and oils—Determination of solid fat content by pulsed NMR—Direct method 动植物油脂 脉冲核磁共振法测定固体脂肪含量 直接法 |
China National Standards solid |
English PDF |
| GB/T 31740.1-2015 |
Tea products—Part 1: Instant tea in solid form 茶制品 第1部分：固态速溶茶 |
China National Standards solid |
English PDF |
| GB/T 2449.1-2014 |
Sulphur for industrial use—Part 1: solid product 工业硫磺 第1部分：固体产品 |
China National Standards solid |
English PDF |
| GB/T 31123-2014 |
Paperboard for solid food packaging 固体食品包装用纸板 |
China National Standards solid |
English PDF |
| GB 30760-2014 |
Technical specification for coprocessing of solid waste in cement kiln 水泥窑协同处置固体废物技术规范 |
China National Standards solid |
English PDF |
| GB/T 30729-2014 |
Determination of chlorine in solid biofuels 固体生物质燃料中氯的测定方法 |
China National Standards solid |
English PDF |
| GB/T 30728-2014 |
Determination of nitrogen in solid biofuels 固体生物质燃料中氮的测定方法 |
China National Standards solid |
English PDF |
| GB/T 30727-2014 |
Determination of calorific value in solid biofuels 固体生物质燃料发热量测定方法 |
China National Standards solid |
English PDF |
| GB/T 30726-2014 |
Determination of ash fusibility of solid biofuels 固体生物质燃料灰熔融性的测定方法 |
China National Standards solid |
English PDF |
| GB/T 30725-2014 |
Determination of ash composition in solid biofuels 固体生物质燃料灰成分测定方法 |
China National Standards solid |
English PDF |
| GB 18485-2014 |
Standard for pollution control on the municipal solid waste incineration 生活垃圾焚烧污染控制标准 |
China National Standards solid |
English PDF |
| GB/T 30562-2014 |
solid wire electrodes,solid wires and rods for fusion welding of titanium and titanium alloys 钛及钛合金焊丝 |
China National Standards solid |
English PDF |
| GB 50954-2014 |
Code for design of municipal solid waste co-processing in cement kiln 水泥窑协同处置垃圾工程设计规范 |
China National Standards solid |
English PDF |
| GB/T 30205-2013 |
General requirements for solid remote power controller of aircraft 飞机固态遥控功率控制器通用要求 |
China National Standards solid |
English PDF |
| GB/T 30310-2013 |
Determination of dip solids pickup on yarns and cords of synthetic fiber 化学纤维帘线、纱线和线绳附胶量测定的试验方法 |
China National Standards solid |
English PDF |
| GB/T 18798.4-2013 |
Instant tea in solid form—Part 4: Specification 固态速溶茶 第4部分：规格 |
China National Standards solid |
English PDF |
| GB 30485-2013 |
Standard for pollution control on co-processing of solid wastes in cement kiln 水泥窑协同处置固体废物污染控制标准 |
China National Standards solid |
English PDF |
| GB/T 14864-2013 |
solid-polyethene insulated flexible radio-frequency cables 实心聚乙烯绝缘柔软射频电缆 |
China National Standards solid |
English PDF |
| GB/T 2900.5-2013 |
Electrotechnical terminology―Electrical insulating solids,liquids and gases 电工术语 绝缘固体、液体和气体 |
China National Standards solid |
English PDF |
| GB/T 30056-2013 |
Requirement on container consolidation services of international freight forwarders 国际货运代理拼箱服务质量要求 |
China National Standards solid |
English PDF |
| GB 30000.8-2013 |
Rules for classification and labelling of chemicals - Part 8: Flammable solids 化学品分类和标签规范 第8部分：易燃固体 |
China National Standards solid |
English PDF |
| GB 30000.15-2013 |
Rules for classification and labelling of chemicals - Part 15: Oxidizing solids 化学品分类和标签规范 第15部分：氧化性固体 |
China National Standards solid |
English PDF |
| GB 30000.11-2013 |
Rules for classification and labelling of chemicals - Part 11: Pyrophoric solids 化学品分类和标签规范 第11部分：自燃固体 |
China National Standards solid |
English PDF |
| GB 50869-2013 |
Technical code for municipal solid waste sanitary landfill 生活垃圾卫生填埋处理技术规范 |
China National Standards solid |
English PDF |
| GB/T 29602-2013 |
solid beverages 固体饮料 |
China National Standards solid |
English PDF |
| GB/T 29511-2013 |
Protective clothing - Chemical protective clothing against solid particulates 防护服装 固体颗粒物化学防护服 |
China National Standards solid |
English PDF |
| GB/T 29152-2012 |
Flue gas cleaning system for municipal solid waste incineration 垃圾焚烧尾气处理设备 |
China National Standards solid |
English PDF |
| GB/T 4207-2012 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards solid |
English PDF |
| GB/T 28992-2012 |
Heat-treated solid wood flooring 热处理实木地板 |
China National Standards solid |
English PDF |
| GB/T 15175-2012 |
Measurement methods for main parameter of solid state lasers 固体激光器主要参数测量方法 |
China National Standards solid |
English PDF |
| GB/T 28734-2012 |
Determination of carbon and hydrogen in solid biofuels 固体生物质燃料中碳氢测定方法 |
China National Standards solid |
English PDF |
| GB/T 28733-2012 |
Determination of total moisture for solid biofuels 固体生物质燃料全水分测定方法 |
China National Standards solid |
English PDF |
| GB/T 28732-2012 |
Determination of total sulfur in solid biofuels 固体生物质燃料全硫测定方法 |
China National Standards solid |
English PDF |
| GB/T 28731-2012 |
Proximate analysis of solid biofuels 固体生物质燃料工业分析方法 |
China National Standards solid |
English PDF |
| GB/T 28730-2012 |
Method for preparation of solid biofuels sample 固体生物质燃料样品制备方法 |
China National Standards solid |
English PDF |
| GB/T 17207-2012 |
Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount - Capacitors with solid(MnO2) electrolyte - Assessment level EZ 电子设备用固定电容器 第18-1部分：空白详细规范 表面安装固体(MnO2)电解质铝固定电容器 评定水平EZ |
China National Standards solid |
English PDF |
| GB/T 15490-2012 |
General specification for solid state lasers 固体激光器总规范 |
China National Standards solid |
English PDF |
| GB/T 28920-2012 |
Operation and management for dangerous solids and liquids in educational experiments 教学实验用危险固体、液体的使用与保管 |
China National Standards solid |
English PDF |
| GB/T 27945.3-2011 |
The management of hazardous solid wastes from heat treatment salts Part 3 ：Method of innocent treatment 热处理盐浴有害固体废物的管理 第3部分：无害化处理方法 |
China National Standards solid |
English PDF |
| GB/T 27945.2-2011 |
The management of hazardous solid wastes from heat treatment salts Part 2：Test method of extractives 热处理盐浴有害固体废物的管理 第2部分：浸出液检测方法 |
China National Standards solid |
English PDF |
| GB/T 27945.1-2011 |
The management of hazardous solid wastes from heat treatment salt Part 1 ：General management 热处理盐浴有害固体废物的管理 第1部分：一般管理 |
China National Standards solid |
English PDF |
| GB/T 27841-2011 |
Chemical products for industrial use - Determination of hydrosolubility of solids and liquids with high solubility - Flask method 工业用化学品 具有高溶解性的固体和液体水溶性测定 烧瓶法 |
China National Standards solid |
English PDF |
| GB/T 7023-2011 |
Standard test method for leachability of low and intermediate level solidified radioactive waste forms 低、中水平放射性废物固化体标准浸出试验方法 |
China National Standards solid |
English PDF |
| GB/T 27803-2011 |
Analysis method for solid composition releasing chorine dioxide 二氧化氯固体释放剂分析方法 |
China National Standards solid |
English PDF |
| GB/T 27802-2011 |
solid composition releasing chorine dioxide 二氧化氯固体释放剂 |
China National Standards solid |
English PDF |
| GB/T 26762-2011 |
Crystalline fructose and solid fructose-glucose 结晶果糖、固体果葡糖 |
China National Standards solid |
English PDF |
| GB/T 21650.3-2011 |
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part3: Analysis of micropores by gas adsorption 压汞法和气体吸附法测定固体材料孔径分布和孔隙度 第3部分：气体吸附法分析微孔 |
China National Standards solid |
English PDF |
| GB/T 25992-2010 |
solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions 整体硬质合金和陶瓷直柄球头立铣刀 尺寸 |
China National Standards solid |
English PDF |
| Find out:361Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
