China National Standards

China specimens GB Standards List


  •  China "specimens" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 15597.2-2024 Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination {译}
    塑料-聚甲基丙烯酸甲酯(PMMA)-模塑和挤出材料-第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 25774.3-2023 Inspection of welding materials Part 3: Preparation and inspection of T-joint fillet weld specimens {译}
    焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验
    China National Standards
    specimens

    English PDF
    GB/T 25774.2-2023 Inspection of welding materials Part 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel {译}
    焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备
    China National Standards
    specimens

    English PDF
    GB/T 25774.1-2023 Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals {译}
    焊接材料的检验 第1部分: 钢、镍及镍合金熔敷金属力学性能试样的制备
    China National Standards
    specimens

    English PDF
    GB/Z 21223.3-2023 Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data {译}
    老化试验数据统计分析导则 第3部分:给定试验数据的不同试验条件下的最少试样数量
    China National Standards
    specimens

    English PDF
    GB/T 462-2023 Paper, board and pulp Determination of moisture content of analytical specimens {译}
    纸、纸板和纸浆 分析试样水分的测定
    China National Standards
    specimens

    English PDF
    GB/T 43088-2023 Microbeam analysis Analytical electron microscopy Method for determination of dislocation density in metallic thin crystal specimens {译}
    微束分析 分析电子显微术 金属薄晶体试样中位错密度的测定方法
    China National Standards
    specimens

    English PDF
    GB/T 39482.1-2023 Electrochemical Impedance Spectroscopy (EIS) of Painted and Unpainted Metal specimens Part 1: Terms and Definitions {译}
    涂漆和未涂漆金属试样的电化学阻抗谱(EIS) 第1部分:术语和定义
    China National Standards
    specimens

    English PDF
    GB/T 1458-2023 Test method for mechanical properties of fiber-wound reinforced composite ring specimens {译}
    纤维缠绕增强复合材料环形试样力学性能试验方法
    China National Standards
    specimens

    English PDF
    GB/T 16865-2023 specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products {译}
    变形铝、镁及其合金加工制品拉伸试验用试样及方法
    China National Standards
    specimens

    English PDF
    GB/Z 42521-2023 Iron ore - Acid dissolution or alkali fusion method for test specimens {译}
    铁矿石 试样的酸溶解或碱熔融方法
    China National Standards
    specimens

    English PDF
    GB/T 1927.11-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain {译}
    无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.16-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain {译}
    无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定
    China National Standards
    specimens

    English PDF
    GB/T 41654-2022 Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high temperature corrosive environments {译}
    金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法
    China National Standards
    specimens

    English PDF
    GB/T 1927.15-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains {译}
    无疵小试样木材物理力学性质试验方法 第15部分:横纹抗拉强度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.13-2022 Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity {译}
    无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.14-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain {译}
    无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定
    China National Standards
    specimens

    English PDF
    GB/T 42266-2022 Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame {译}
    柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估
    China National Standards
    specimens

    English PDF
    GB/T 1927.21-2022 Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force {译}
    无疵小试样木材物理力学性质试验方法 第21部分:握钉力测定
    China National Standards
    specimens

    English PDF
    GB/T 41758.2-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译}
    塑料 聚酮(PK)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 40314-2021 Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
    金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型
    China National Standards
    specimens

    English PDF
    GB/T 40302-2021 Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
    塑料 立式软薄试样与小火焰源接触的燃烧性能测定
    China National Standards
    specimens

    English PDF
    GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料 聚乙烯(PE)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 39827.2-2021 Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties
    塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 39812-2021 Plastics—Preparation of test specimens by machining
    塑料 试样的机加工制备
    China National Standards
    specimens

    English PDF
    GB/T 1927.20-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength
    无疵小试样木材物理力学性质试验方法 第20部分:抗劈力测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.19-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness
    无疵小试样木材物理力学性质试验方法 第19部分:硬度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.18-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation
    无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.17-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength
    无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.12-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain
    无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
    无疵小试样木材物理力学性质试验方法 第10部分:抗弯弹性模量测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.9-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength
    无疵小试样木材物理力学性质试验方法 第9部分:抗弯强度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.8-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling
    无疵小试样木材物理力学性质试验方法 第8部分:湿胀性测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.7-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption
    无疵小试样木材物理力学性质试验方法 第7部分:吸水性测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.6-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage
    无疵小试样木材物理力学性质试验方法 第6部分:干缩性测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.5-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density
    无疵小试样木材物理力学性质试验方法 第5部分:密度测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content
    无疵小试样木材物理力学性质试验方法 第4部分:含水率测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.3-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood
    无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定
    China National Standards
    specimens

    English PDF
    GB/T 1927.2-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements
    无疵小试样木材物理力学性质试验方法 第2部分:取样方法和一般要求
    China National Standards
    specimens

    English PDF
    GB/T 1927.1-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 1: Collection of sample tree
    无疵小试样木材物理力学性质试验方法 第1部分:试材采集
    China National Standards
    specimens

    English PDF
    GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint
    金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法
    China National Standards
    specimens

    English PDF
    GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
    塑料 聚四氟乙烯(PTFE)半成品 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2:Preparation of test specimens and determination of properties
    塑料 源自柔性和刚性消费品包装的聚丙烯(PP)和聚乙烯(PE)回收混合物 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
    塑料 热塑性塑料材料注塑试样的制备 第5部分:各向异性评估用标准试样的制备
    China National Standards
    specimens

    English PDF
    GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
    塑料 热塑性塑料材料注塑试样的制备 第2部分:小拉伸试样
    China National Standards
    specimens

    English PDF
    GB/T 39482.3-2020 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens—Part 3: Processing and analysis of data from dummy cells
    涂漆和未涂漆金属试样的电化学阻抗谱(EIS) 第3部分:从模拟电解池获得数据的处理和分析
    China National Standards
    specimens

    English PDF
    GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
    塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 37426-2019 Plastics—Test specimens
    塑料 试样
    China National Standards
    specimens

    English PDF
    GB/T 17037.1-2019 Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens
    塑料 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条形试样的制备
    China National Standards
    specimens

    English PDF
    GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens
    环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品)
    China National Standards
    specimens

    English PDF
    GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料-聚丁烯(PB)模塑和挤出材料-第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 37194.2-2018 Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 19292.4-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity
    金属和合金的腐蚀 大气腐蚀性 第4部分:用于评估腐蚀性的标准试样的腐蚀速率的测定
    China National Standards
    specimens

    English PDF
    GB/T 36374.2-2018 Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties
    塑料 砜聚合物模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 36790-2018 Plastics—Polyamides—Accelerated conditioning of test specimens
    塑料 聚酰胺 试样加速状态调节
    China National Standards
    specimens

    English PDF
    GB/T 34691.2-2017 Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
    微束分析 扫描电子显微术 生物试样扫描电子显微镜分析方法
    China National Standards
    specimens

    English PDF
    GB/T 19346.1-2017 Amorphous and nanocrystalline alloys measurement methods—Part 1:AC magnetic properties by the use of ring specimens
    非晶纳米晶合金测试方法 第1部分:环形试样交流磁性能
    China National Standards
    specimens

    English PDF
    GB/T 13822-2017 Test specimens for nonferrous diecasting alloys
    压铸有色合金试样
    China National Standards
    specimens

    English PDF
    GB/T 35513.2-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分:试样制备和性能测试
    China National Standards
    specimens

    English PDF
    GB/T 2291-2016 Method for preparation of coal tar pitch specimens
    煤沥青实验室试样的制备方法
    China National Standards
    specimens

    English PDF
    GB/T 25774.2-2016 Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel
    焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验
    China National Standards
    specimens

    English PDF
    GB/T 32363.2-2015 Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 聚酰胺模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/Z 32075-2015 Non-destructive testing—Discontinuities in specimens for use in qualification examinations
    无损检测 资格鉴定考试用试样中的不连续
    China National Standards
    specimens

    English PDF
    GB/T 16545-2015 Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens
    金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除
    China National Standards
    specimens

    English PDF
    GB/T 31290-2014 Carbon fibre—Determination of the tensile properties of single-filament specimens
    碳纤维 单丝拉伸性能的测定
    China National Standards
    specimens

    English PDF
    GB/T 5455-2014 Textiles―Burning behaviour―Determination of damaged Length,afterglow time and afterflame time of vertically oriented specimens
    纺织品 燃烧性能 垂直方向损毁长度、阴燃和续燃时间的测定
    China National Standards
    specimens

    English PDF
    GB/T 30924.2-2014 Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 30815-2014 Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis
    表面化学分析 分析样品的制备和安装方法指南
    China National Standards
    specimens

    English PDF
    GB/T 8628-2013 Textiles—Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
    纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量
    China National Standards
    specimens

    English PDF
    GB/T 3403.2-2013 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties
    塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 13454.2-2013 Plastics - Melamine-formaldehyde powder moulding compounds(MF-PMCs)-Part 2: Preparation of test specimens and determination of properties
    塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 28894-2012 Surface chemical analysis - Handling of specimens prior to analysis
    表面化学分析 分析前样品的处理
    China National Standards
    specimens

    English PDF
    GB/T 27797.10-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
    纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑
    China National Standards
    specimens

    English PDF
    GB/T 25777-2010 Preparation methods for deposited metal specimens of chemical analysis
    焊接材料熔敷金属化学分析试样制备方法
    China National Standards
    specimens

    English PDF
    GB/T 25774.3-2010 Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint
    焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验
    China National Standards
    specimens

    English PDF
    GB/T 25774.1-2010 Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys
    焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验
    China National Standards
    specimens

    English PDF
    GB/T 15597.2-2010 Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 24522-2009 Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint
    金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法
    China National Standards
    specimens

    English PDF
    GB/T 5456-2009 Textiles - Burning behaviour - Flame spread properties of vertically oriented specimens
    纺织品 燃烧性能 垂直方向试样火焰蔓延性能的测定
    China National Standards
    specimens

    English PDF
    GB/T 24148.2-2009 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties
    塑料 不饱和聚酯树脂(UP-R) 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 10629-2009 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
    纺织品 用于化学试验的实验室样品和试样的准备
    China National Standards
    specimens

    English PDF
    GB/T 13760-2009 Geosynthetics - Sampling and preparation of test specimens
    土工合成材料 取样和试样准备
    China National Standards
    specimens

    English PDF
    GB/T 8746-2009 Textiles - Burning behaviour - Determination of ease of ignition of vertically oriented specimens
    纺织品 燃烧性能 垂直方向试样易点燃性的测定
    China National Standards
    specimens

    English PDF
    GB/T 3917.5-2009 Textiles - Tear properties of fabrics - Part 5: Determination of tear force of wing-shaped test specimens (Single tear method)
    纺织品 织物撕破性能 第5部分:翼形试样(单缝)撕破强力的测定
    China National Standards
    specimens

    English PDF
    GB/T 3917.4-2009 Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
    纺织品 织物撕破性能 第4部分:舌形试样(双缝)撕破强力的测定
    China National Standards
    specimens

    English PDF
    GB/T 3917.3-2009 Textiles - Tear properties of fabrics - Part 3: Determination of tear force of trapezoid-shaped test specimens
    纺织品 织物撕破性能 第3部分:梯形试样撕破强力的测定
    China National Standards
    specimens

    English PDF
    GB/T 3917.2-2009 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
    纺织品 织物撕破性能 第2部分:裤形试样(单缝)撕破强力的测定
    China National Standards
    specimens

    English PDF
    GB/T 14495-2009 Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces
    产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块
    China National Standards
    specimens

    English PDF
    GB/T 9340-2009 Methods for color measurement of fluorescent specimens
    荧光样品颜色的测量方法
    China National Standards
    specimens

    English PDF
    GB/T 1929-2009 Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood
    木材物理力学试材锯解及试样截取方法
    China National Standards
    specimens

    English PDF
    GB/T 22376.2-2008 Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems
    胶粘剂 本体试样的制备方法 第2部分:热固化单组份体系
    China National Standards
    specimens

    English PDF
    GB/T 22376.1-2008 Adhesives - Methods of preparing bulk specimens - Part 1: Two-pawrt systems
    胶粘剂 本体试样的制备方法 第1部分:双组份体系
    China National Standards
    specimens

    English PDF
    GB/T 12001.2-2008 Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties
    塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 11997-2008 Plastic - Multipurpose test specimens
    塑料 多用途试样
    China National Standards
    specimens

    English PDF
    GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
    塑料 热塑性塑料材料试样的压塑
    China National Standards
    specimens

    English PDF
    GB/T 5471-2008 Plastics - Compression moulding of test specimens of thermosetting materials
    塑料 热固性塑料试样的压塑
    China National Standards
    specimens

    English PDF
    GB/T 2407-2008 Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
    塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定
    China National Standards
    specimens

    English PDF
    GB/T 22271.2-2008 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲醛(POM)模塑和挤塑材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 1404.2-2008 Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties
    塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 18873-2008 General guide of transmission electron microscope (TEM)- X-ray energy dispersive spectrometry(EDS) quantitative microanalysis for thin biological specimens
    生物薄试样的透射电子显微镜-X射线能谱定量分析通则
    China National Standards
    specimens

    English PDF
    GB/T 2423.43-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests
    电工电子产品环境试验 第2部分:试验方法 振动、冲击和类似动力学试验样品的安装
    China National Standards
    specimens

    English PDF
    GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens
    涂料试样状态调节和试验的温湿度
    China National Standards
    specimens

    English PDF
    GB/T 7732-2008 Metallic materials - Fracture toughness testing method with surface crack tension specimens
    金属材料 表面裂纹拉伸试样断裂韧度试验方法
    China National Standards
    specimens

    English PDF
    GB/T 21461.2-2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 21460.2-2008 Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 15970.9-2007 Corrosion of metal and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
    金属和合金的腐蚀 应力腐蚀试验 第9部分:渐增式载荷或渐增式位移下的预裂纹试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 15970.6-2007 Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
    金属和合金的腐蚀 应力腐蚀试验 第6部分:恒载荷或恒位移下的预裂纹试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 20310-2006 Textile glass-Rovings-Manufacture of test specimens and determination of tensile strength of impregnated rovings
    玻璃纤维无捻粗纱 浸胶纱试样的制作和拉伸强度的测定
    China National Standards
    specimens

    English PDF
    GB/T 20120.2-2006 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens
    金属和合金的腐蚀 腐蚀疲劳试验 第2部分:预裂纹试验裂纹扩展试验
    China National Standards
    specimens

    English PDF
    GB/T 6060.2-2006 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed
    表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面
    China National Standards
    specimens

    English PDF
    GB/T 20417.2-2006 Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 1845.2-2006 Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 2423.36-2005 Environmental testing for electric and electronic products Part 2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
    电工电子产品环境试验 第2部分:试验方法 试验Z/BFc:散热和非散热试验样品的高温/振动(正弦)综合试验
    China National Standards
    specimens

    English PDF
    GB/T 2423.35-2005 Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
    电工电子产品环境试验 第2部分:试验方法 试验Z/AFc:散热和非散热试验样品的低温/振动(正弦)综合试验
    China National Standards
    specimens

    English PDF
    GB/T 15970.8-2005 Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments
    金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 19292.4-2003 Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
    金属和合金的腐蚀 大气腐蚀性 用于评估腐蚀性的标准试样的腐蚀速率的测定
    China National Standards
    specimens

    English PDF
    GB/T 6594.2-2003 Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties
    塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 2546.2-2003 Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 18964.2-2003 Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    specimens

    English PDF
    GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
    塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定
    China National Standards
    specimens

    English PDF
    GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
    塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片
    China National Standards
    specimens

    English PDF
    GB/T 6461-2002 Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
    金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级
    China National Standards
    specimens

    English PDF
    GB/T 18747.2-2002 The determination of shear strength of anaerobic adhesives using pin-and-collar specimens
    厌氧胶粘剂剪切强度的测定(轴和套环试验法)
    China National Standards
    specimens

    English PDF
    GB/T 14926.42-2001 Laboratory animal--Bacteriological monitoring--Collection of specimens
    实验动物 细菌学检测 标本采集
    China National Standards
    specimens

    English PDF
    GB/T 15970.4-2000 Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens
    金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 15970.2-2000 Corrosionof metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens
    金属和合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 15970.5-1998 Corrosion of metals and alloys--Stress corrosion testing--Part 5:Preparation and useof C-ring specimens
    金属和合金的腐蚀 应力腐蚀试验 第5部分:C型环试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 6060.1-1997 Roughness comparison specimens--Cast surfaces
    表面粗糙度比较样块 铸造表面
    China National Standards
    specimens

    English PDF
    GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens
    热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备
    China National Standards
    specimens

    English PDF
    GB/T 16545-1996 Corrosion of metals and alloys--Removal of corrosion products from corrosion test specimens
    金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除
    China National Standards
    specimens

    English PDF
    GB/T 15970.3-1995 Corrosion of metals and alloys--Stress corrosion testing--Part 3:Preparation and use of U-bend specimens
    金属和合金的腐蚀 应力腐蚀试验 第3部分:U型弯曲试样的制备和应用
    China National Standards
    specimens

    English PDF
    GB/T 2423.7-1995 Environmental testing for electric and electronic products--Part 2:Test methods--Test Ec and guidance:Drop and topple (Primarily for equipment-type specimens)
    电工电子产品环境试验 第二部分:试验方法 试验Ec和导则:倾跌与翻倒 (主要用于设备型样品)
    China National Standards
    specimens

    English PDF
    GB/T 13822-1992 Test specimens for non-ferrous die-casting alloys
    压铸有色合金试样
    China National Standards
    specimens

    English PDF
    GB/T 2291-1980 Method for preparation of coal tar pitchs specimens
    煤沥青试验室试样的制备方法
    China National Standards
    specimens

    English PDF

    Find out:136Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards