Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 33393-2023 |
Footwear - Test methods for complete shoes - Determination of thermal and moisture resistance {译} 鞋类 整鞋试验方法 热阻和湿阻的测定 |
China National Standards test method determination |
 English PDF |
| GB/T 32440.1-2023 |
Footwear - Chemical test methods - Determination of phthalates - Part 1: Solvent extraction method {译} 鞋类 化学试验方法 邻苯二甲酸酯的测定 第1部分：溶剂萃取法 |
China National Standards test method determination |
English PDF |
| GB/T 4893.4-2023 |
Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method {译} 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards test method determination |
English PDF |
| GB/T 17530.2-2023 |
Test methods for industrial acrylic acid and esters Part 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography {译} 工业丙烯酸及酯的试验方法 第2部分：工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 6324.12-2023 |
Test methods for organic chemical products Part 12: Determination of trace amounts of mercury in organic liquid chemical products Atomic fluorescence method {译} 有机化工产品试验方法 第12部分：有机液体化工产品微量汞的测定 原子荧光法 |
China National Standards test method determination |
English PDF |
| GB/T 43211-2023 |
Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving {译} 软木粒机械筛分测定粒度的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 43016-2023 |
Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles {译} 人造革合成革试验方法 表面褶皱的测定和评价 |
China National Standards test method determination |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards test method determination |
English PDF |
| GB/T 27698.4-2023 |
Performance test methods for heat exchangers and heat transfer elements - Part 4: Noise determination of air coolers {译} 热交换器及传热元件性能测试方法 第4部分：空冷器噪声测定 |
China National Standards test method determination |
English PDF |
| GB/T 7702.7-2023 |
Test methods for coal-based granular activated carbon-Part 7: Determination of iodine adsorption value {译} 煤质颗粒活性炭试验方法 第7部分：碘吸附值的测定 |
China National Standards test method determination |
English PDF |
| GB/T 42349-2023 |
Determination of antiviral activity of photocatalytic materials Q-beta phage test method {译} 光催化材料抗病毒活性的测定 Q-β噬菌体试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 28896-2023 |
Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints {译} 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 1927.11-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第11部分：顺纹抗压强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.16-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第16部分：顺纹抗剪强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.15-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains {译} 无疵小试样木材物理力学性质试验方法 第15部分：横纹抗拉强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity {译} 无疵小试样木材物理力学性质试验方法 第13部分：横纹抗压弹性模量测定 |
China National Standards test method determination |
English PDF |
| GB/T 14571.3-2022 |
Test methods for ethylene glycol for industrial use - Part 3: Determination of aldehyde content {译} 工业用乙二醇试验方法 第3部分：醛含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.21-2022 |
Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering {译} 建筑密封材料试验方法 第21部分：人工加速气候老化后颜色变化的测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.14-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第14部分：顺纹抗拉强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 41382-2022 |
Fire test open calorimeter method determination of heat release rate and combustion products in fire below 40mW {译} 火灾试验 开放式量热计法 40MW以下火灾热释放速率及燃烧产物的测定 |
China National Standards test method determination |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 14571.4-2022 |
Test methods for ethylene glycol for industrial use Part 4: Determination of ultraviolet transmittance ultraviolet spectrophotometric method {译} 工业用乙二醇试验方法 第4部分：紫外透光率的测定 紫外分光光度法 |
China National Standards test method determination |
English PDF |
| GB/T 17473.7-2022 |
Test methods of precious metals pastes used for microelectronics—Part 7: Determination of solderability and solder leaching resistance 微电子技术用贵金属浆料测试方法 第7部分：可焊性、耐焊性测定 |
China National Standards test method determination |
English PDF |
| GB/T 12967.6-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 |
China National Standards test method determination |
English PDF |
| GB/T 12967.4-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 30310-2022 |
Test method for determination of the amount of glue attached to dipped cords, yarns and cords {译} 浸胶帘线、纱线和线绳附胶量测定的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 24218.102-2022 |
Textiles - Test methods for nonwovens - Part 102: Determination of tensile elasticity {译} 纺织品 非织造布试验方法 第102部分：拉伸弹性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 42122-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) {译} 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法） |
China National Standards test method determination |
English PDF |
| GB/T 13477.23-2022 |
Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering {译} 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.22-2022 |
Test methods for building sealing materials - Part 22: Determination of curing characteristics {译} 建筑密封材料试验方法 第22部分：固化特性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards test method determination |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译} 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards test method determination |
English PDF |
| GB/T 1927.21-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force {译} 无疵小试样木材物理力学性质试验方法 第21部分：握钉力测定 |
China National Standards test method determination |
English PDF |
| GB/T 41633.3-2022 |
Insulating liquids - Determination of acid value - Part 3: Test methods for non-mineral insulating oils {译} 绝缘液体 酸值的测定 第3部分：非矿物绝缘油的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 41793-2022 |
Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing {译} 人造革合成革试验方法 潜在酚黄变的测定 |
China National Standards test method determination |
English PDF |
| GB/T 41704-2022 |
Testing method for cathode material of lithium ion battery - Determination of magnetic foreign matter content and residual alkali content {译} 锂离子电池正极材料检测方法 磁性异物含量和残余碱含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38265.3-2022 |
Test methods for soldering fluxes - Part 3: Determination of acid value - Potentiometric and visual titration {译} 软钎剂试验方法 第3部分：酸值的测定 电位滴定法和目视滴定法 |
China National Standards test method determination |
English PDF |
| GB/T 38265.9-2022 |
Test methods for soldering fluxes - Part 9: Determination of ammonia content {译} 软钎剂试验方法 第9部分：氨含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38265.8-2022 |
Test methods for soldering fluxes - Part 8: Determination of zinc content {译} 软钎剂试验方法 第8部分：锌含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38265.6-2022 |
Test methods for soldering fluxes - Part 6: Determination of halide (excluding fluoride) content {译} 软钎剂试验方法 第6部分：卤化物（不包括氟化物）含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 40345-2021 |
Crop protection equipment—Test method for the determination of drainable volume and its concentration 植物保护机械 确定可排放液体体积及浓度的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 6324.11-2021 |
Test method of organic chemical products—Part 11：Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method 有机化工产品试验方法 第11部分：液体化工产品中微量砷的测定 原子荧光法 |
China National Standards test method determination |
English PDF |
| GB/T 5211.14-2021 |
General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical flushing procedure 颜料和体质颜料通用试验方法 第14部分：筛余物的测定 机械冲洗法 |
China National Standards test method determination |
English PDF |
| GB/T 1425-2021 |
Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 9966.9-2021 |
Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency 天然石材试验方法 第9部分：通过测量共振基本频率测定动力弹性模数 |
China National Standards test method determination |
English PDF |
| GB/T 9966.13-2021 |
Test methods for natural stone—Part 13:Determination of water absorption coefficient by capillarity 天然石材试验方法 第13部分：毛细吸水系数的测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.11-2021 |
Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock 天然石材试验方法 第11部分：激冷激热加速老化强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.17-2021 |
Test methods for natural stone-Part 17:Determination of resistance to salt crystallization 天然石材试验方法 第17部分：盐结晶强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.16-2021 |
Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient 天然石材试验方法 第16部分：线性热膨胀系数的测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.15-2021 |
Test methods for natural stone- Part 15:Determination of resistance ageing by salt mist 天然石材试验方法 第15部分：耐盐雾老化强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.14-2021 |
Test methods for natural stone-Part 14:Determination of rupture energy 天然石材试验方法 第14部分：耐断裂能量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.12-2021 |
Test methods for natural stone-Part 12:Determination of static elastic modulus 天然石材试验方法 第12部分：静态弹性模数的测定 |
China National Standards test method determination |
English PDF |
| GB/T 9966.10-2021 |
Test methods for natural stone-Part 10:Determination of resistance to shaking for individual stone anchoragest 天然石材试验方法 第10部分：挂件组合单元抗震性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 39748.9-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 |
China National Standards test method determination |
English PDF |
| GB/T 39748.8-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 |
China National Standards test method determination |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards test method determination |
English PDF |
| GB/T 39748.6-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 |
China National Standards test method determination |
English PDF |
| GB/T 39748.11-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 39748.10-2021 |
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 |
China National Standards test method determination |
English PDF |
| GB/T 39939-2021 |
Volatile organic compounds in furniture components—Test method for the rapid determination in the field 家具部件中挥发性有机化合物 现场快速检测方法 |
China National Standards test method determination |
English PDF |
| GB/T 12736-2021 |
Conveyor belts—Determination of strenght of mechanical fastenings—Static test method 输送带 机械接头强度的测定 静态试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 7991.1-2021 |
Test method of viterous and porcelain enamels—Part 1：Determination of resistance to alkaline liquids 搪玻璃层试验方法 第1部分：耐碱性溶液腐蚀性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 41104.2-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38265.13-2021 |
Test methods for soft soldering fluxes—Part 13: Determination of flux spattering 软钎剂试验方法 第13部分：钎剂溅散性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分：耐温差急变性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.19-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.18-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.8-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定 |
China National Standards test method determination |
English PDF |
| GB/T 41079.1-2021 |
Test methods for physical properties of liquid metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分：密度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.7-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.6-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.5-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分：密度测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.4-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定 |
China National Standards test method determination |
English PDF |
| GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 |
China National Standards test method determination |
English PDF |
| GB/T 6683.1-2021 |
Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test 石油及相关产品 测量方法与结果精密度 第1部分：试验方法精密度数据的确定 |
China National Standards test method determination |
English PDF |
| GB/T 39507-2020 |
Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法 |
China National Standards test method determination |
English PDF |
| GB/T 39520-2020 |
Test method for determination the residual stress of spring by X-ray diffraction 弹簧残余应力的X射线衍射测试方法 |
China National Standards test method determination |
English PDF |
| GB/T 39221-2020 |
Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method 反渗透海水淡化阻垢剂阻垢性能试验 周期浓缩循环法 |
China National Standards test method determination |
English PDF |
| GB/T 24328.6-2020 |
Tissue paper and tissue products—Part 6: Determination of water-absorption time and water-absorption capacity—Basket-immersion test method 卫生纸及其制品 第6部分: 吸水时间和吸水能力的测定 篮筐浸没法 |
China National Standards test method determination |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 6324.10-2020 |
Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method 有机化工产品试验方法 第10部分：有机液体化工产品微量硫的测定 紫外荧光法 |
China National Standards test method determination |
English PDF |
| GB/T 5137.4-2020 |
Test methods of safety glazing materials used on road vehicles—Part 4:Determination of solar characteristic 汽车安全玻璃试验方法 第4部分：太阳能特性试验 |
China National Standards test method determination |
English PDF |
| GB/T 38612-2020 |
Test method of artificial leather and synthetic leather—Determination of tensile load and elongation at break 人造革合成革试验方法 拉伸负荷及断裂伸长率的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38611-2020 |
Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability 办公家具 办公工作椅 稳定性、强度和耐久性测试方法 |
China National Standards test method determination |
English PDF |
| GB/T 38607-2020 |
Office furniture—Tables and desks—Test methods for the determination of stability, strength and durability 办公家具 桌台类 稳定性、强度和耐久性测试方法 |
China National Standards test method determination |
English PDF |
| GB/T 9966.7-2020 |
Test methods for natural stone--Part 7: Determination of strength for individual stone anchorages 天然石材试验方法 第7部分：石材挂件组合单元挂装强度试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.6-2020 |
Test methods for natural stone--Part 6: Determination of acid resistance 天然石材试验方法 第6部分：耐酸性试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.5-2020 |
Test methods for natural stone--Part 5: Determination of hardness 天然石材试验方法 第5部分：硬度试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.4-2020 |
Test methods for natural stone--Part 4: Determination of abrasion resistance 天然石材试验方法 第4部分：耐磨性试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.3-2020 |
Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity 天然石材试验方法 第3部分：吸水率、体积密度、真密度、真气孔率试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.2-2020 |
Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural strength 天然石材试验方法 第2部分：干燥、水饱和、冻融循环后弯曲强度试验 |
China National Standards test method determination |
English PDF |
| GB/T 9966.1-2020 |
Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength 天然石材试验方法 第1部分：干燥、水饱和、冻融循环后压缩强度试验 |
China National Standards test method determination |
English PDF |
| GB/T 38464-2020 |
Test method of artificial leather and synthetic leather—Determination of cold resistance 人造革合成革试验方法 耐揉搓性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38465-2020 |
Test method of artificial leather and synthetic leather—Determination of cold resistance 人造革合成革试验方法 耐寒性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 39368-2020 |
Leather—Physical and mechanical tests—Determination of flex resistance：Vamp flex method 皮革 物理和机械试验 耐折牢度的测定：鞋面弯曲法 |
China National Standards test method determination |
English PDF |
| GB/T 36805.2-2020 |
Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards test method determination |
English PDF |
| GB/T 31334.6-2020 |
Test methods for dipped canvas—Part 6 : Determinations of size, grammage, etc 浸胶帆布试验方法 第6部分：尺寸、克重等基本项目测量 |
China National Standards test method determination |
English PDF |
| GB/T 24981.2-2020 |
Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness 稀土长余辉荧光粉试验方法 第2部分：余辉亮度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 24981.1-2020 |
Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates 稀土长余辉荧光粉试验方法 第1部分：发射主峰和色品坐标的测定 |
China National Standards test method determination |
English PDF |
| GB/T 12688.10-2020 |
Test method of styrene for industrial use—Part 10: Determination of oxygenates—Gas chromatography 工业用苯乙烯试验方法 第10部分:含氧化合物的测定 气相色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 5211.6-2020 |
General methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension 颜料和体质颜料通用试验方法 第6部分：水悬浮液pH值的测定 |
China National Standards test method determination |
English PDF |
| GB/T 5211.3-2020 |
General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ 颜料和体质颜料通用试验方法 第3部分：105℃挥发物的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38265.2-2019 |
Test methods for soft soldering fluxes—Part 2: Determination of non-volatile matter—Ebulliometric method 软钎剂试验方法 第2部分：不挥发物质含量的测定 沸点法 |
China National Standards test method determination |
English PDF |
| GB/T 38265.1-2019 |
Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method 软钎剂试验方法 第1部分：不挥发物质含量的测定 重量法 |
China National Standards test method determination |
English PDF |
| GB/T 7991.7-2019 |
Test method of viterous and porcelain enamels—Part 7：Determination of coefficient of mean lincar thermal expansion 搪玻璃层试验方法 第7部分：平均线热膨胀系数的测定 |
China National Standards test method determination |
English PDF |
| GB/T 7991.4-2019 |
Test method of viterous and porcelain enamels—Part 4：Determination of resistance to impact 搪玻璃层试验方法 第4部分：耐机械冲击性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 38402-2019 |
Leather and fur—Chemical tests—Determination of chromium(VI) content:Chromatographic method 皮革和毛皮 化学试验 六价铬含量的测定：色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 38265.1-2019 |
Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method 软钎剂试验方法 第1部分：不挥发物质含量的测定 重量法 |
China National Standards test method determination |
English PDF |
| GB/T 7991.7-2019 |
Test method of viterous and porcelain enamels—Part 7：Determination of coefficient of mean lincar thermal expansion 搪玻璃层试验方法 第7部分：平均线热膨胀系数的测定 |
China National Standards test method determination |
English PDF |
| GB/T 7991.4-2019 |
Test method of viterous and porcelain enamels—Part 4：Determination of resistance to impact 搪玻璃层试验方法 第4部分：耐机械冲击性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 21242-2019 |
Fireworks—Test methods of qualitative determination of prohibitive and limitative substances 烟花爆竹 禁限用物质定性检测方法 |
China National Standards test method determination |
English PDF |
| GB/T 18476-2019 |
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） |
China National Standards test method determination |
English PDF |
| GB/T 13477.14-2019 |
Test method for building sealants－Part 14：Determination of resistance to prolonged exposure to water
建筑密封材料试验方法 第14部分：浸水及拉伸-压缩循环后粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 37619-2019 |
Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.13-2019 |
Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable temperatures 建筑密封材料试验方法 第13部分：冷拉-热压后粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 12688.5-2019 |
Test method of styrene for industrial use—Part 5：Determination of the content of total aldehydes—Titrimetric method 工业用苯乙烯试验方法 第5部分：总醛含量的测定 滴定法 |
China National Standards test method determination |
English PDF |
| GB/T 12688.1-2019 |
Test method of styrene for industrial use—Part 1：Determination of purity and hydrocarbon impurities—Gas chromatography 工业用苯乙烯试验方法 第1部分：纯度及烃类杂质的测定 气相色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 11026.10-2019 |
Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy 电气绝缘材料 耐热性 第10部分：利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则 |
China National Standards test method determination |
English PDF |
| GB/T 37160-2019 |
Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry（ICP-OES） 重质馏分油、渣油及原油中痕量金属元素的测定 电感耦合等离子体发射光谱法 |
China National Standards test method determination |
English PDF |
| GB/T 3142-2019 |
Standard test method for determination of load-carrying capacity of lubricants—Four-ball method 润滑剂承载能力的测定 四球法 |
China National Standards test method determination |
English PDF |
| GB/T 10066.6-2018 |
Test methods for electroheating and electromagnetic processing installations—Part 6：Test methods for the determination of power output of industrial microwave heating installations 电热和电磁处理装置的试验方法-第6部分：工业微波加热装置输出功率的测定方法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.2-2018 |
Test method for building sealants－Part 2：Determination of density 建筑密封材料试验方法-第2部分：密度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.12-2018 |
Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature 建筑密封材料试验方法-第12部分：同一温度下拉伸-压缩循环后粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 34542.3-2018 |
Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) 氢气储存输送系统 第3部分：金属材料氢脆敏感度试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 24218.15-2018 |
Textiles—Test methods for nonwovens—Part 15: Determination of air permeability 纺织品 非织造布试验方法 第15部分：透气性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 14571.2-2018 |
Test method of ethylene glycol for industrial use—Part 2: Determination of purity and impurities—Gas chromatography 工业用乙二醇试验方法 第2部分：纯度和杂质的测定 气相色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 35815-2018 |
Test methods of wooden activated carbon—Determination of toluene adsorption 木质活性炭试验方法 甲苯吸附率的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35905-2018 |
Test methods for biomass—Determination of total solids in biomass 林业生物质原料分析方法 总固体含量测定 |
China National Standards test method determination |
English PDF |
| GB/T 6881.2-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法 |
China National Standards test method determination |
English PDF |
| GB/T 3780.5-2017 |
Carbon black—Part5：Determination of specific surface area—CTAB test method 炭黑 第5部分：比表面积的测定 CTAB法 |
China National Standards test method determination |
English PDF |
| GB/T 34100-2017 |
Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method 轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.19-2017 |
Test method for building sealants—Part 19：Determination of change in mass and volume 建筑密封材料试验方法 第19部分：质量与体积变化的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.20-2017 |
Test method for building sealants—Part 20：Determination of staining 建筑密封材料试验方法 第20部分：污染性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 2522-2017 |
Methods of test for the determination of coating insulation resistance and coating adhesion of electrical strip and sheet 电工钢带(片)涂层绝缘电阻和附着性测试方法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.15-2017 |
Test method for building sealants—Part 15：Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water 建筑密封材料试验方法 第15部分：经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.11-2017 |
Test method for building sealants—Part 11：Determination of tensile properties at maintained extension after immersion in wates 建筑密封材料试验方法 第11部分：浸水后定伸粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.4-2017 |
Test method for building sealants—Part 4：Determination of extrudability of one-component sealants 建筑密封材料试验方法 第4部分：原包装单组分密封材料挤出性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.9-2017 |
Test method for building sealants—Part 9：Determination of adhesion/cohesion properties after immersion in water 建筑密封材料试验方法 第9部分：浸水后拉伸粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.3-2017 |
Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus 建筑密封材料试验方法 第3部分：使用标准器具测定密封材料挤出性的方法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.10-2017 |
Test method for building sealants—Part 10：Determination of tensile properties at maintained extension 建筑密封材料试验方法 第10部分：定伸粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 13477.8-2017 |
Test method for building sealants—Part 8：Determination of tensile properties 建筑密封材料试验方法 第8部分：拉伸粘结性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 24218.17-2017 |
Textiles—Test methods for nonwovens—Part 17: Determination of resistance to penetration by water (spray impact) 纺织品 非织造布试验方法 第17部分：抗渗水性的测定（喷淋冲击法） |
China National Standards test method determination |
English PDF |
| GB/T 24218.16-2017 |
Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) 纺织品 非织造布试验方法 第16部分：抗渗水性的测定(静水压法) |
China National Standards test method determination |
English PDF |
| GB/T 33648-2017 |
Test method for identification and determination of specific non-regular additives in motor gasoline—Infrared spectroscopic method 车用汽油中典型非常规添加物的识别与测定 红外光谱法 |
China National Standards test method determination |
English PDF |
| GB/T 13477.17-2017 |
Test method for building sealants—Part 17：Determination of elastic recovery 建筑密封材料试验方法 第17部分：弹性恢复率的测定 |
China National Standards test method determination |
English PDF |
| GB/T 16601.2-2017 |
Lasers and laser-related equipment—Test methods for laser-induced damage threshold—Part 2: Threshold determination 激光器和激光相关设备 激光损伤阈值测试方法 第2部分：阈值确定 |
China National Standards test method determination |
English PDF |
| GB/T 35565-2017 |
Test methods of wooden activated carbon—Determination of formaldehyde adsorption 木质活性炭试验方法 甲醛吸附率的测定 |
China National Standards test method determination |
English PDF |
| GB/T 14513.1-2017 |
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动 使用可压缩流体元件的流量特性测定 第1部分：稳态流动的一般规则和试验方法 |
China National Standards test method determination |
English PDF |
| GB/T 35464-2017 |
Agglomerated stone test methods—Determination of resistance to ageing by salt mist 合成石材试验方法 盐雾老化测试 |
China National Standards test method determination |
English PDF |
| GB/T 35160.4-2017 |
Test methods for agglomerated stone—Part 4：Determination of abrasion resistance 合成石材试验方法 第4部分：耐磨性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35160.6-2017 |
Test methods for agglomerated stone—Part 6：Determination of impact resistance 合成石材试验方法 第6部分：耐冲击性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35160.3-2017 |
Test methods for agglomerated stone—Part 3：Determination of compressive strength 合成石材试验方法 第3部分：压缩强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35160.2-2017 |
Test methods for agglomerated stone—Part 2：Determination of flexural strength 合成石材试验方法 第2部分：弯曲强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35160.1-2017 |
Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption 合成石材试验方法 第1部分：密度和吸水率的测定 |
China National Standards test method determination |
English PDF |
| GB/T 35160.5-2017 |
Test methods for agglomerated stone—Part 5：Determination of thermal shock 合成石材试验方法 第5部分：热激变性能的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.9-2016 |
Test methods for aluminium and aluminium alloy foils—Part 9: Determination of hydrophilic property 铝箔试验方法 第9部分：亲水性的检测 |
China National Standards test method determination |
English PDF |
| GB/T 22638.5-2016 |
Test methods for aluminium and aluminium alloy foils—Part 5：Determination of wettability 铝箔试验方法 第5部分：润湿性的检测 |
China National Standards test method determination |
English PDF |
| GB/T 22638.6-2016 |
Test methods for aluminium and aluminium alloy foils—Part 6: Determination of direct current resistance 铝箔试验方法 第6部分：直流电阻的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.3-2016 |
Test methods for aluminium and aluminium alloy foils—Part 3：Determination of stickiness 铝箔试验方法 第3部分：粘附性的检测 |
China National Standards test method determination |
English PDF |
| GB/T 22638.10-2016 |
Test methods for aluminium and aluminium alloy foils—Part 10：Determination of mass per unit area (surface density) of coatings 铝箔试验方法 第10部分：涂层表面密度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.7-2016 |
Test methods for aluminium and aluminium alloy foils－Part 7：Determination of heat seal strength 铝箔试验方法 第7部分：热封强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.8-2016 |
Test methods for aluminum and aluminum alloy foils－Part 8: Determination of cube texture content 铝箔试验方法 第8部分：立方面织构含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 6324.9-2016 |
Test method of organic chemical products—Part 9: Determination of chloride 有机化工产品试验方法 第9部分：氯的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.2-2016 |
Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole 铝箔试验方法 第2部分：针孔的检测 |
China National Standards test method determination |
English PDF |
| GB/T 22638.4-2016 |
Test methods for aluminium and aluminium alloy foils—Part 4：Determination of surface wetting tension 铝箔试验方法 第4部分：表面润湿张力的测定 |
China National Standards test method determination |
English PDF |
| GB/T 22638.1-2016 |
Test methods for aluminium and aluminium alloy foils—Part 1: Determination of thickness 铝箔试验方法 第1部分: 厚度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 24218.5-2016 |
Textiles—Test methods for nonwovens—Part 5: Determination of resistance to mechanical penetration (ball burst method) 纺织品 非织造布试验方法 第5部分：耐机械穿透性的测定（钢球顶破法） |
China National Standards test method determination |
English PDF |
| GB/T 14571.1-2016 |
Test method of monoethylene glycol for industrial use—Part 1: Determination of acidity—Titration method 工业用乙二醇试验方法 第1部分：酸度的测定 滴定法 |
China National Standards test method determination |
English PDF |
| GB/T 14571.5-2016 |
Test method of monoethylene glycol for industrial use—Part 5: Determination of chloride ion—Ion chromatography 工业用乙二醇试验方法 第5部分：氯离子的测定 离子色谱法 |
China National Standards test method determination |
English PDF |
| GB/T 32788.1-2016 |
Test method for properties of prepreg—Part 1: Determination of gel time 预浸料性能试验方法 第1部分：凝胶时间的测定 |
China National Standards test method determination |
English PDF |
| GB/T 32788.2-2016 |
Test method for properties of prepreg—Part 2: Determination for resin flow of prepreg 预浸料性能试验方法 第2部分：树脂流动度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 32788.6-2016 |
Test method for properties of prepreg—Part 6: Determination of mass per unit area 预浸料性能试验方法 第6部分：单位面积质量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 32788.4-2016 |
Test method for properties of prepreg—Part 4: Determination of tensile strength 预浸料性能试验方法 第4部分：拉伸强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 32788.3-2016 |
Test method for properties of prepreg—Part 3: Determination of volatile content 预浸料性能试验方法 第3部分：挥发物含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 32788.5-2016 |
Test method for properties of prepreg—Part 5: Determination of resin content 预浸料性能试验方法 第5部分：树脂含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 258-2016 |
Standard test method for determination of acidity of light petroleum products 轻质石油产品酸度测定法 |
China National Standards test method determination |
English PDF |
| GB/T 503-2016 |
Determination of the gasoline octane number—Test method for motor octane number 汽油辛烷值的测定 马达法 |
China National Standards test method determination |
English PDF |
| GB/T 30921.4-2016 |
Test method of purified terephthalic acid (PTA) for industrial use—Part 4: Determination of titanium content—Diantipyrylmethane photometric method 工业用精对苯二甲酸（PTA）试验方法 第4部分：钛含量的测定 二安替吡啉甲烷分光光度法 |
China National Standards test method determination |
English PDF |
| GB/T 30921.6-2016 |
Test method of purified terephthalic acid (PTA) for industrial use—Part 6: Determination of particle size distribution 工业用精对苯二甲酸（PTA）试验方法 第6部分：粒度分布的测定 |
China National Standards test method determination |
English PDF |
| GB/T 30921.3-2016 |
Test method of purified terephthalic acid (PTA) for industrial use—Part 3: Determination of water content 工业用精对苯二甲酸（PTA）试验方法 第3部分：水含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 30921.2-2016 |
Test method of purified terephthalic acid (PTA) for industrial use—Part 2: Determination of metal content 工业用精对苯二甲酸（PTA）试验方法 第2部分：金属含量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 30921.5-2016 |
Test method of purified terephthalic acid (PTA) for industrial use—Part 5: Determination of acid number 工业用精对苯二甲酸（PTA）试验方法 第5部分：酸值的测定 |
China National Standards test method determination |
English PDF |
| GB/T 30921.7-2016 |
Test method of purified terephthalic acid(PTA) for industrial use—Part 7: Determination of b* value—Color difference meter 工业用精对苯二甲酸（PTA）试验方法 第7部分：b*值的测定 色差计法 |
China National Standards test method determination |
English PDF |
| GB/T 3810.9-2016 |
Test methods of ceramic tiles—Part 9: Determination of resistance to thermal shock 陶瓷砖试验方法 第9部分：抗热震性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.8-2016 |
Test methods of ceramic tiles—Part 8: Determination of linear thermal expansion 陶瓷砖试验方法 第8部分：线性热膨胀的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.7-2016 |
Test methods of ceramic tiles—Part 7: Determination of resistance to surface abrasion for glazed tiles 陶瓷砖试验方法 第7部分：有釉砖表面耐磨性的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.6-2016 |
Test methods of ceramic tiles—Part 6: Determination of resistance to deep abrasion for unglazed tiles 陶瓷砖试验方法 第6部分：无釉砖耐磨深度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.5-2016 |
Test methods of ceramic tiles—Part 5: Determination of impact resistance by measurement of coefficient of restitution 陶瓷砖试验方法 第5部分：用恢复系数确定砖的抗冲击性 |
China National Standards test method determination |
English PDF |
| GB/T 3810.4-2016 |
Test methods of ceramic tiles—Part 4: Determination of modulus of rupture amd breaking strength 陶瓷砖试验方法 第4部分：断裂模数和破坏强度的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.3-2016 |
Test methods of ceramic tiles—Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density 陶瓷砖试验方法 第3部分：吸水率、显气孔率、表观相对密度和容重的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.2-2016 |
Test methods of ceramic tiles—Part 2: Determination of dimension and surface quality 陶瓷砖试验方法 第2部分：尺寸和表面质量的检验 |
China National Standards test method determination |
English PDF |
| GB/T 3810.16-2016 |
Test methods of ceramic tiles—Part 16: Determination of small colour differences 陶瓷砖试验方法 第16部分：小色差的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.15-2016 |
Test methods of ceramic tiles—Part 15: Determination of lead and cadmium given off by glazed tiles 陶瓷砖试验方法 第15部分：有釉砖铅和镉溶出量的测定 |
China National Standards test method determination |
English PDF |
| GB/T 3810.14-2016 |
Test methods of ceramic tiles—Part 14: Determination of resistance to stains 陶瓷砖试验方法 第14部分：耐污染性的测定 |
China National Standards test method determination |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
