Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43924.2-2024 |
Aerospace-MJ thread-Part 2: Limit dimensions of threads for bolts and nuts {译} 航空航天-MJ螺纹-第2部分：螺栓和螺母螺纹的极限尺寸 |
China National Standards threads |
 English PDF |
| GB/T 43924.3-2024 |
Aerospace-MJ thread-Part 3: Limit dimensions of threads for fluid system pipe fittings {译} 航空航天-MJ螺纹-第3部分：流体系统管路件螺纹的极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 20333-2023 |
Basic Dimensions and Designations of Taps for Cylindrical and Conical Pipe threads {译} 圆柱和圆锥管螺纹丝锥的基本尺寸和标志 |
China National Standards threads |
English PDF |
| GB/T 5796.4-2022 |
Trapezoidal screw threads—Part 4: Tolerances 梯形螺纹 第4部分：公差 |
China National Standards threads |
English PDF |
| GB/T 5796.3-2022 |
Trapezoidal screw threads—Part 3: Basic dimensions 梯形螺纹 第3部分：基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 5796.2-2022 |
Trapezoidal screw threads—Part 2: General plan 梯形螺纹 第2部分：直径与螺距系列 |
China National Standards threads |
English PDF |
| GB/T 5796.1-2022 |
Trapezoidal screw threads—Part 1: Profiles 梯形螺纹 第1部分：牙型 |
China National Standards threads |
English PDF |
| GB/T 9253-2022 |
Oil and Gas Industry Machining, Measurement and Inspection of Casing, Tubing and Line Pipe threads {译} 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards threads |
English PDF |
| GB/T 38575-2021 |
Spectacle frames -- Screw threads 眼镜架 螺纹 |
China National Standards threads |
English PDF |
| GB/T 22522-2021 |
Metric series wires for measuring screw threads 测量螺纹用米制系列量针 |
China National Standards threads |
English PDF |
| GB/T 39522-2020 |
Metric series wires for the pitch diameters of screw threads 螺纹中径米制系列量针 |
China National Standards threads |
English PDF |
| GB/T 39641-2020 |
Methods for gaging fastening screw threads by thread indicating gages 螺纹指示量规检测紧固螺纹方法 |
China National Standards threads |
English PDF |
| GB/T 37462-2019 |
Locking threads with 30 degree wedge ramp 30°楔形防松螺纹 |
China National Standards threads |
English PDF |
| GB/T 36224-2018 |
Inserts for aviation,self-locking with MJ threads, open type, in aluminium alloy 航空用MJ螺纹铝合金通孔自锁镶嵌件 |
China National Standards threads |
English PDF |
| GB/T 15054.1-2018 |
Miniature screw threads—Part 1：Profiles, general plan and basic dimensions 小螺纹 第1部分：牙型、系列和基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 15054.2-2018 |
Miniature screw threads—Part 2：Tolerances and limits of size 小螺纹 第2部分：公差和极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 36153-2018 |
Aluminium alloy MJ threads inserts of self-locking floating nut for aviation 航空用MJ螺纹铝合金带游动自锁螺母的镶嵌件 |
China National Standards threads |
English PDF |
| GB/T 36253-2018 |
Inserts for aviation, self-locking with MJ threads, closed type, in aluminium alloy 航空用MJ螺纹铝合金盲孔自锁镶嵌件 |
China National Standards threads |
English PDF |
| GB/T 197-2018 |
General purpose metric screw threads—Tolerances 普通螺纹 公差 |
China National Standards threads |
English PDF |
| GB/T 9253.2-2017 |
Petroleum and natural gas industries—Threading,gauging and thread inspection of casing,tubing,and line pipe threads 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards threads |
English PDF |
| GB/T 34632-2017 |
The blank diameters for rolling unified screw threads 统一螺纹搓制和滚制前的毛坯直径 |
China National Standards threads |
English PDF |
| GB/T 18685-2017 |
The blank diameters for rolling general purpose metric screw threads 普通螺纹搓制和滚制前的毛坯直径 |
China National Standards threads |
English PDF |
| GB/T 2878.3-2017 |
Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series) 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第3部分：轻型螺柱端（L系列） |
China National Standards threads |
English PDF |
| GB/T 32537-2016 |
Runouts, undercuts and chamfers for trapezoidal and buttress threads 梯形和锯齿形螺纹收尾、肩距、退刀槽和倒角 |
China National Standards threads |
English PDF |
| GB/T 32535-2016 |
Runouts, undercuts and chamfers for pipe threads 管螺纹收尾、肩距、退刀槽和倒角 |
China National Standards threads |
English PDF |
| GB/T 32534-2016 |
Test methods for taper screw threads 圆锥螺纹检测方法 |
China National Standards threads |
English PDF |
| GB/T 14791-2013 |
Screw threads―Vocabulary 螺纹 术语 |
China National Standards threads |
English PDF |
| GB/T 6839-2013 |
Testing method for lubrication of sewing threads 缝纫线润滑性试验方法 |
China National Standards threads |
English PDF |
| GB/T 29537-2013 |
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards threads |
English PDF |
| GB/T 1414-2013 |
General purpose metric screw threads - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards threads |
English PDF |
| GB/T 28703-2012 |
Test methods for parallel screw threads 圆柱螺纹检测方法 |
China National Standards threads |
English PDF |
| GB/T 28467-2012 |
Color card of polyester embroidery threads 涤纶绣花线色卡 |
China National Standards threads |
English PDF |
| GB/T 28466-2012 |
Polyester filament embroidery threads 涤纶长丝绣花线 |
China National Standards threads |
English PDF |
| GB/T 28272-2012 |
Metric screw threads with extra fine pitch - Series and basic dimensions 米制超细牙螺纹 系列和基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 28271-2012 |
Metric screw threads with extra fine pitch - Tolerances 米制超细牙螺纹 公差 |
China National Standards threads |
English PDF |
| GB 8335-2011 |
Special threads for gas cylinders 气瓶专用螺纹 |
China National Standards threads |
English PDF |
| GB/T 2878.4-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 4: Hex plugs 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第4部分：六角螺塞 |
China National Standards threads |
English PDF |
| GB/T 2878.2-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 2: heavy-duty stud ends (S series) 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第2部分：重型螺柱端（S系列） |
China National Standards threads |
English PDF |
| GB/T 2878.1-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第1部分：油口 |
China National Standards threads |
English PDF |
| GB/T 27944-2011 |
Dryseal pipe threads with the thread angle of 60 degrees 60°干密封管螺纹 |
China National Standards threads |
English PDF |
| GB/T 12716-2011 |
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads 60°密封管螺纹 |
China National Standards threads |
English PDF |
| GB/T 10878-2011 |
Special taps of taper threads for gas cylinders 气瓶锥螺纹丝锥 |
China National Standards threads |
English PDF |
| GB 9765-2009 |
Tyre valve threads 轮胎气门嘴螺纹 |
China National Standards threads |
English PDF |
| GB/T 2696-2008 |
Jute yarns and threads 黄麻纱线 |
China National Standards threads |
English PDF |
| GB/T 15756-2008 |
General purpose metric screw threads - Limits of sizes 普通螺纹 极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 1415-2008 |
Metric threads where pressure-tight joints are made on the threads 米制密封螺纹 |
China National Standards threads |
English PDF |
| GB/T 13576.4-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分：公差 |
China National Standards threads |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 13576.2-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分：直径与螺距系列 |
China National Standards threads |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards threads |
English PDF |
| GB/T 12359-2008 |
Metric trapezoidal screw threads - Limits of sizes 梯形螺纹 极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 22091.1-2008 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads 55°密封管螺纹量规 第1部分：用于检验圆柱内螺纹与圆锥外螺纹 |
China National Standards threads |
English PDF |
| GB/T 22055.2-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M25×0.75mm 显微镜 物镜螺纹 第2部分：M25×0.75mm型物镜螺纹 |
China National Standards threads |
English PDF |
| GB/T 22055.1-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in) 显微镜 物镜螺纹 第1部分：RMS型物镜螺纹（4/5in×1/36in） |
China National Standards threads |
English PDF |
| GB/T 22029-2008 |
Hot-dip galvanized screw threads - On external screw threads there is the clearance for accommodating the hot-dip galvanized coat 热浸镀锌螺纹 在外螺纹上容纳镀锌层 |
China National Standards threads |
English PDF |
| GB/T 22028-2008 |
Hot-dip galvanized screw threads - On internal screw threads there is the clearance for accommodating the hot-dip galvanized coat 热浸镀锌螺纹 在内螺纹上容纳镀锌层 |
China National Standards threads |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards threads |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards threads |
English PDF |
| GB/T 10954-2006 |
Turning tools for threads with clamp tips 机夹螺纹车刀 |
China National Standards threads |
English PDF |
| GB/T 20670-2006 |
Unified screw threads - General plan 统一螺纹 直径与牙数系列 |
China National Standards threads |
English PDF |
| GB/T 20669-2006 |
Unified screw threads - Profiles 统一螺纹 牙型 |
China National Standards threads |
English PDF |
| GB/T 20668-2006 |
Unified screw threads - Basic dimensions 统一螺纹 基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 20667-2006 |
Unified screw threads - Limits of sizes 统一螺纹 极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 20666-2006 |
Unified screw threads - Tolerances 统一螺纹 公差 |
China National Standards threads |
English PDF |
| GB/T 20334-2006 |
Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion G系列和Rp系列管螺纹磨牙丝锥的螺纹尺寸公差 |
China National Standards threads |
English PDF |
| GB/T 20333-2006 |
Taps for parallel and taper pipe threads General dimensions and marking 圆柱和圆锥管螺纹丝锥的基本尺寸和标志 |
China National Standards threads |
English PDF |
| GB/T 20330-2006 |
Drill diameter for use prior to tapping screw threads 攻丝前钻孔用麻花钻直径 |
China National Standards threads |
English PDF |
| GB/T 20328-2006 |
Circular dies for taper pipe threads - R series R系列圆锥管螺纹圆板牙 |
China National Standards threads |
English PDF |
| GB/T 20324-2006 |
Circular dies for parallel pipe threads - G series G系列圆柱管螺纹圆板牙 |
China National Standards threads |
English PDF |
| GB/T 10922-2006 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹量规 |
China National Standards threads |
English PDF |
| GB/T 5796.4-2005 |
Trapezoidal screw threads-Part 4:Tolerances 梯形螺纹 第4部分：公差 |
China National Standards threads |
English PDF |
| GB/T 5796.3-2005 |
Trapezoidal screw threads-Part 3:Basic dimensions 梯形螺纹 第3部分：基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 5796.2-2005 |
Trapezoidal screw threads-Part 2:General plan 梯形螺纹 第2部分：直径与螺距系列 |
China National Standards threads |
English PDF |
| GB/T 5796.1-2005 |
Trapezoidal screw threads-Part 1:Profiles 梯形螺纹 第1部分：牙型 |
China National Standards threads |
English PDF |
| GB/T 8124-2004 |
Tolerances and general features of gauges for metric trapezoidal screw threads 梯形螺纹量规 技术条件 |
China National Standards threads |
English PDF |
| GB/T 3934-2003 |
Specification of gauges for general purpose screw threads 普通螺纹量规 技术条件 |
China National Standards threads |
English PDF |
| GB/T 9146-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan 普通螺纹 粗糙精度、优选系列的极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 9145-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of medium quality and preferable plan 普通螺纹 中等精度、优选系列的极限尺寸 |
China National Standards threads |
English PDF |
| GB/T 9144-2003 |
General purpose metric screw threads--Preferable plan 普通螺纹 优选系列 |
China National Standards threads |
English PDF |
| GB/T 2516-2003 |
General purpose metric screw threads--Limit deviations 普通螺纹 极限偏差 |
China National Standards threads |
English PDF |
| GB/T 197-2003 |
General purpose metric screw threads--Tolerances 普通螺纹 公差 |
China National Standards threads |
English PDF |
| GB/T 196-2003 |
General purpose metric screw threads--Basic dimensions 普通螺纹 基本尺寸 |
China National Standards threads |
English PDF |
| GB/T 193-2003 |
General purpose metric screw threads--Generalplan 普通螺纹 直径与螺距系列 |
China National Standards threads |
English PDF |
| GB/T 192-2003 |
General purpose metric screw threads--Basic profile 普通螺纹 基本牙型 |
China National Standards threads |
English PDF |
| GB/T 18685-2002 |
The bar diameters for rolling general purpose metric screw threads 搓、滚制普通螺纹前的毛坯直径 |
China National Standards threads |
English PDF |
| GB/T 7307-2001 |
Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹 |
China National Standards threads |
English PDF |
| GB/T 7306.2-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards threads |
English PDF |
| GB/T 7306.1-2000 |
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards threads |
English PDF |
| GB/T 18052-2000 |
Gauging and inspection of casing， tubing and line pipe threads 套管、油管和管线管螺纹的测量和检验方法 |
China National Standards threads |
English PDF |
| GB/T 9253.2-1999 |
Petroleum andnatural gas industries--Threading，gauging，and threadinspection of casing，tubing and line pipe threads 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards threads |
English PDF |
| GB/T 1181-1998 |
The interference-fit threads 过盈配合螺纹 |
China National Standards threads |
English PDF |
| GB/T 17194-1997 |
Conduits for electrical purposes--Outside diameters of conduits for electrical installations and threads of conduits and fittings 电气导管 电气安装用导管的外径和导管与配件的螺纹 |
China National Standards threads |
English PDF |
| GB/T 3-1997 |
Run-outs，undercuts and chamfers forgeneral purpose metric screw threads 普通螺纹收尾、肩距、退刀槽和倒角 |
China National Standards threads |
English PDF |
| GB/T 1167-1996 |
The threads for transition fit 过渡配合螺纹 |
China National Standards threads |
English PDF |
| GB/T 4668-1995 |
Textiles--Woven fabrics--Determination of number of threads per unit length 机织物密度的测定 |
China National Standards threads |
English PDF |
| GB/T 4459.1-1995 |
Mechanical drawings--Representation of screw threads and threaded parts 机械制图 螺纹及螺纹紧固件表示法 |
China National Standards threads |
English PDF |
| GB/T 15054.5-1994 |
Miniature screw threads--Limits of sizes 小螺纹 极限尺寸 |
China National Standards threads |
English PDF |
| Find out:97Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
