Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44152-2024 |
ultrasonic testing methods for seamless steel pipe ends {译} 无缝钢管管端超声检测方法 |
China National Standards ultrasonic |
 English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-controlled array ultrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards ultrasonic |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-ultrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31211.1-2024 |
Non-destructive testing-ultrasonic guided wave testing-Part 1: General rules {译} 无损检测-超声导波检测-第1部分：总则 |
China National Standards ultrasonic |
English PDF |
| GB/T 31211.2-2024 |
Non-destructive testing-ultrasonic guided wave testing-Part 2: Magnetostriction method {译} 无损检测-超声导波检测-第2部分：磁致伸缩法 |
China National Standards ultrasonic |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: ultrasonic testing by time-of-flight diffraction {译} 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 43888-2024 |
ultrasonic testing method for rails {译} 钢轨超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43896-2024 |
Metallic materials - Ultra-high cycle fatigue - ultrasonic fatigue test methods {译} 金属材料-超高周疲劳-超声疲劳试验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43900-2024 |
Nondestructive testing of steel products - ultrasonic testing method for torsional residual stress distribution of shaft components {译} 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43921-2024 |
Non-destructive testing-ultrasonic testing-Full matrix acquisition/full focusing technology (FMC/TFM) {译} 无损检测-超声检测-全矩阵采集/全聚焦技术（FMC/TFM） |
China National Standards ultrasonic |
English PDF |
| GB/T 6519-2024 |
ultrasonic Inspection Methods for Deformed Aluminum and Magnesium Alloy Products {译} 变形铝、镁合金产品超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43615-2023 |
Additive manufacturing ultrasonic testing method of directed energy deposition metal forming parts {译} 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43480-2023 |
Non-destructive testing Phased array ultrasonic cylindrical imaging guided wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards ultrasonic |
English PDF |
| GB/Z 43410-2023 |
Non-destructive testing Automatic ultrasonic testing System selection and application {译} 无损检测 自动超声检测 系统选择和应用 |
China National Standards ultrasonic |
English PDF |
| GB/T 3310-2023 |
ultrasonic testing method for copper and copper alloy rods {译} 铜及铜合金棒材超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: ultrasonic non-destructive testing of bond quality for alloys with thickness ≥0.5mm {译} 滑动轴承 多层金属滑动轴承 第1部分：合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards ultrasonic |
English PDF |
| GB/T 43232-2023 |
Fasteners - ultrasonic measurement method of axial stress {译} 紧固件 轴向应力超声测量方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 43320-2023 |
Non-destructive testing of welds, ultrasonic testing, application of automatic phased array technology for thin-walled steel components {译} 焊缝无损检测 超声检测 薄壁钢构件自动相控阵技术的应用 |
China National Standards ultrasonic |
English PDF |
| GB/T 29712-2023 |
Weld non-destructive testing ultrasonic testing Acceptance level {译} 焊缝无损检测 超声检测 验收等级 |
China National Standards ultrasonic |
English PDF |
| GB/T 29711-2023 |
Non-destructive testing of welds ultrasonic testing Characteristics of internal discontinuities in welds {译} 焊缝无损检测 超声检测 焊缝内部不连续的特征 |
China National Standards ultrasonic |
English PDF |
| GB/T 11345-2023 |
Weld non-destructive testing ultrasonic testing technology, testing levels and assessments {译} 焊缝无损检测 超声检测 技术、检测等级和评定 |
China National Standards ultrasonic |
English PDF |
| GB/T 42664-2023 |
Non-destructive testing of steel pipes Automatic ultrasonic detection of longitudinal and/or transverse defects in welded steel pipe seams {译} 钢管无损检测 焊接钢管焊缝纵向和/或横向缺欠的自动超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 42662-2023 |
Non-destructive testing of steel pipes Automatic ultrasonic detection of delamination defects in steel strips/plates for welded steel pipes {译} 钢管无损检测 焊接钢管用钢带/钢板分层缺欠的自动超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 20490-2023 |
Non-destructive testing of steel pipes Automatic ultrasonic detection of delamination defects in seamless and welded steel pipes {译} 钢管无损检测 无缝和焊接钢管分层缺欠的自动超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 42872-2023 |
Non-destructive testing ultrasonic testing and evaluation methods for in-service steam turbine blades {译} 无损检测 在役汽轮机叶片超声检测和评价方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 12604.13-2023 |
Non-destructive testing - Terminology - Part 13: Array ultrasonic testing {译} 无损检测 术语 第13部分：阵列超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 7233.2-2023 |
Steel castings - ultrasonic testing - Part 2: High pressure steel castings {译} 铸钢件 超声检测 第2部分：高承压铸钢件 |
China National Standards ultrasonic |
English PDF |
| GB/T 42592-2023 |
Wind turbines - ultrasonic testing method for wind rotor blades {译} 风力发电机组 风轮叶片超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18604-2023 |
Measuring natural gas flow with a gas ultrasonic flowmeter {译} 用气体超声流量计测量天然气流量 |
China National Standards ultrasonic |
English PDF |
| GB/T 7233.1-2023 |
Steel castings - ultrasonic testing - Part 1: Steel castings for general purposes {译} 铸钢件 超声检测 第1部分：一般用途铸钢件 |
China National Standards ultrasonic |
English PDF |
| GB/T 42399.3-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: Combined systems {译} 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 |
China National Standards ultrasonic |
English PDF |
| GB/T 42399.2-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 2: Probes {译} 无损检测仪器 相控阵超声设备的性能与检验 第2部分：探头 |
China National Standards ultrasonic |
English PDF |
| GB/T 42399.1-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 1: Instruments {译} 无损检测仪器 相控阵超声设备的性能与检验 第1部分：仪器 |
China National Standards ultrasonic |
English PDF |
| GB/T 41655-2022 |
Nondestructive Testing ultrasonic Testing Welding, Rolling and Explosive Composite Cladding Testing Technology {译} 无损检测 超声检测 焊接、轧制和爆炸复合覆层检测技术 |
China National Standards ultrasonic |
English PDF |
| GB/T 4162-2022 |
ultrasonic testing method for forged and rolled steel bars {译} 锻轧钢棒超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 41484-2022 |
ultrasonic sensor assembly for automobile {译} 汽车用超声波传感器总成 |
China National Standards ultrasonic |
English PDF |
| GB/T 29461-2012 |
No. 1 Amendment List for ultrasonic Testing of Polyethylene Pipeline Electrofusion Joints {译} 聚乙烯管道电熔接头超声检测《第1号修改单》 |
China National Standards ultrasonic |
English PDF |
| GB/T 7966-2022 |
Acoustics—ultrasonic power measurement—Radiation force balances and the requirements 声学 超声功率测量 辐射力天平法及其要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 41966-2022 |
Phased array ultrasonic testing method for seamless steel pipe {译} 无缝钢管相控阵超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 22131-2022 |
ultrasonic Testing Method for the Inner Surface of Cylindrical Forgings {译} 筒形锻件内表面超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 40332-2021 |
Non-destructive testing—ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment 无损检测 超声检测 超声测厚仪性能特征和测试方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 40101-2021 |
ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 23902-2021 |
Non-destructive testing - ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities 无损检测 超声检测 超声衍射声时技术检测和评价方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 11344-2021 |
Non-destructive testing—ultrasonic thickness measurement 无损检测 超声测厚 |
China National Standards ultrasonic |
English PDF |
| GB/T 40023-2021 |
Non-destructive testing instruments - ultrasonic time-of-flight diffraction instrument - Technical requirements 无损检测仪器 超声衍射声时检测仪 技术要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 8361-2021 |
ultrasonic testing method for the surface of cold drawn round steel 冷拉圆钢表面超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 39849-2021 |
Non-destructive testing instruments—ultrasonic time-of-flight diffraction instrument—Methods of performance tests 无损检测仪器 超声衍射声时检测仪 性能测试方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 39841-2021 |
ultrasonic gas meters 超声波燃气表 |
China National Standards ultrasonic |
English PDF |
| GB/T 18329.4-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm 滑动轴承 多层金属滑动轴承 第4部分: 合金厚度≥0.3mm的结合质量超声穿透无损检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 41115-2021 |
Non-destructive testing of welds -- ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) 焊缝无损检测 超声检测 衍射时差技术（TOFD）的应用 |
China National Standards ultrasonic |
English PDF |
| GB/T 41114-2021 |
Non-destructive testing -- ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards ultrasonic |
English PDF |
| GB/T 40734-2021 |
Non-destructive testing of welds—Phased array ultrasonic testing(PAUT)—Acceptance levels 焊缝无损检测 相控阵超声检测 验收等级 |
China National Standards ultrasonic |
English PDF |
| GB/T 40733-2021 |
Non-destructive testing of welds—ultrasonic testing—Use of automated phased array technology 焊缝无损检测 超声检测 自动相控阵超声技术的应用 |
China National Standards ultrasonic |
English PDF |
| GB/T 40732-2021 |
Non-destructive testing of welds—ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys 焊缝无损检测 超声检测 奥氏体钢和镍基合金焊缝检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 40730-2021 |
Non-destructive testing -- Measuring thickness by electromagnetic ultrasonic pulse-echo 无损检测 电磁超声脉冲回波式测厚方法 |
China National Standards ultrasonic |
English PDF |
| GB 9706.205-2020 |
Medical electrical equipment—Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment 医用电气设备 第2-5部分：超声理疗设备的基本安全和基本性能专用要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 38898-2020 |
Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 38620-2020 |
Methods of evaluating the performance of ultrasonic levelmeter 物位计性能评定方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 38615-2020 |
General specification of ultrasonic levelmeter 超声波物位计通用技术条件 |
China National Standards ultrasonic |
English PDF |
| GB 9706.237-2020 |
Medical electrical equipment—Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment 医用电气设备 第2-37部分：超声诊断和监护设备的基本安全和基本性能专用要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 38683-2020 |
Method of ultrasonic testing for large inclusions in bearing steel 轴承钢中大夹杂物的超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 5193-2020 |
Method of ultrasonic inspection for wrought titanium and titanium alloy products 钛及钛合金加工产品超声检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 38537-2020 |
ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards ultrasonic |
English PDF |
| GB/T 39432-2020 |
Non-destructive testing—ultrasonic testing—Specification for step wedge calibration block 无损检测 超声检测 阶梯试块 |
China National Standards ultrasonic |
English PDF |
| GB/T 39242-2020 |
Non-destructive testing—ultrasonic testing—Sensitivity and range setting 无损检测 超声检测 灵敏度和范围设定 |
China National Standards ultrasonic |
English PDF |
| GB/T 39241-2020 |
Non-destructive testing—ultrasonic testing—Transmission technique 无损检测 超声检测 穿透技术 |
China National Standards ultrasonic |
English PDF |
| GB/T 39240-2020 |
Non-destructive testing—ultrasonic testing—General principles 无损检测 超声检测 总则 |
China National Standards ultrasonic |
English PDF |
| GB/T 39239-2020 |
Non-destructive testing—ultrasonic testing—Characterization and sizing of discontinuities 无损检测 超声检测 不连续的特征和定量 |
China National Standards ultrasonic |
English PDF |
| GB/T 39238-2020 |
Non-destructive testing—ultrasonic testing—Examination for discontinuities perpendicular to the surface 无损检测 超声检测 垂直于表面的不连续的检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 34370.11-2020 |
Nondestructive testing of amusement equipments—Part 11: ultrasonic guided wave testing 游乐设施无损检测 第11部分：超声导波检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 18852-2020 |
Non-destructive testing—ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams 无损检测 超声检测 测量接触探头声束特性的参考试块和方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 12604.1-2020 |
Non-destructive testing—Terminology—ultrasonic testing 无损检测 术语 超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 38337-2019 |
General specification for ultrasonic motor and driver 超声波电动机及其驱动控制器通用技术条件 |
China National Standards ultrasonic |
English PDF |
| GB/T 38337-2019 |
General specification for ultrasonic motor and driver 超声波电动机及其驱动控制器通用技术条件 |
China National Standards ultrasonic |
English PDF |
| GB/T 37566-2019 |
Method of ultrasonic testing for round steel 圆钢超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 37361-2019 |
Determination of the film thickness—ultrasonic thickness gauge method 漆膜厚度的测定 超声波测厚仪法 |
China National Standards ultrasonic |
English PDF |
| GB/T 36989-2018 |
Measurement of liquid hydrocarbons by ultrasonic flow meters 用超声流量计测量液态烃流量 |
China National Standards ultrasonic |
English PDF |
| GB/T 36228-2018 |
Non-destructive testing—Guide for plannar flaw height sizing by ultrasonic testing 无损检测 平面型伤高度超声定量导则 |
China National Standards ultrasonic |
English PDF |
| GB/T 36594-2018 |
Method of ultrasonic inspection for cemented carbide 硬质合金超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 20935.3-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第3部分：利用电磁超声换能器技术进行超声表面检测的方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 20935.2-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34904-2017 |
Spheroidal graphite iron castings—ultrasonic testing 球墨铸铁件 超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 34885-2017 |
Non-destructive testing—Electromagnetic ultrasonic testing—General principles 无损检测 电磁超声检测 总则 |
China National Standards ultrasonic |
English PDF |
| GB/T 34892-2017 |
Non-destructive testing—Test method for robotic ultrasonic testing 无损检测 机械手超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34485-2017 |
Method of ultrasonic inspection for wrought zirconium and zirconium alloy products 锆及锆合金加工产品超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34363-2017 |
Non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34370.5-2017 |
Nondestructive testing of amusement equipments—Part 5：ultrasonic testing 游乐设施无损检测 第5部分：超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 34407-2017 |
Test method for the wall thickness of plastic pipes by ultrasonic 塑料管道壁厚超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34638-2017 |
Non-destructive testing—Test methods for ultrasonic leak detection 无损检测 超声泄漏检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34205-2017 |
Metallic materials—Hardness testing—ultrasonic contact impedance method 金属材料 硬度试验 超声接触阻抗法 |
China National Standards ultrasonic |
English PDF |
| GB/T 34041.1-2017 |
Measurement of fluid flow in closed conduits—ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement 封闭管道中流体流量的测量 气体超声流量计 第1部分:贸易交接和分输计量用气体超声流量计 |
China National Standards ultrasonic |
English PDF |
| GB/T 34041.2-2017 |
Measurement of fluid flow in closed conduits—ultrasonic meters for gas—Part 2: Meters for industrial applications 封闭管道中流体流量的测量 气体超声流量计 第2部分：工业测量用气体超声流量计 |
China National Standards ultrasonic |
English PDF |
| GB/T 33888-2017 |
Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment 无损检测仪器 超声测厚仪特性与验证 |
China National Standards ultrasonic |
English PDF |
| GB/T 34018-2017 |
Non-destructive testing—Test method for scanning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 33693-2017 |
Test method for ultrasonic anemometer 超声波测风仪测试方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 35138-2017 |
Measurement of fluid flow in closed conduits—ultrasonic transit-time meters for liquid 封闭管道中流体流量的测量 渡越时间法液体超声流量计 |
China National Standards ultrasonic |
English PDF |
| GB/Z 35717-2017 |
Discharge measurement for hydraulic turbines, storage pumps and pump-turbines—ultrasonic transit-time method 水轮机、蓄能泵和水泵水轮机流量的测量 超声传播时间法 |
China National Standards ultrasonic |
English PDF |
| GB/T 35361-2017 |
ultrasonic testing technique and quality classification for titanium butt weld joints on submersible 潜水器钛合金对接焊缝超声波检测及质量分级 |
China National Standards ultrasonic |
English PDF |
| GB/T 33163-2016 |
Metallic materials—Residual stress—With ultrasonic impact treatment 金属材料 残余应力 超声冲击处理法 |
China National Standards ultrasonic |
English PDF |
| GB/T 32552-2016 |
Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 32563-2016 |
Non-destructive testing—ultrasonic testing—Test method for phased-array ultrasonic testing 无损检测 超声检测 相控阵超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 32522-2016 |
Acoustics—Electroacoustic characteristics and measurements of spherically focusing ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards ultrasonic |
English PDF |
| GB/T 2970-2016 |
Method for ultrasonic testing of thicker steel plates 厚钢板超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 32552-2016 |
Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 7734-2015 |
Method for ultrasonic testing of clad steel plates 复合钢板超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 32073-2015 |
Non-destructive testing—Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave 无损检测 残余应力超声临界折射纵波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 19799.1-2015 |
Non-destructive testing—ultrasonic testing—Specification for calibration block No. 1 无损检测 超声检测 1号校准试块 |
China National Standards ultrasonic |
English PDF |
| GB/T 11259-2015 |
Non-destructive testing—Practice for fabrication and control of steel reference blocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作和控制方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 8651-2015 |
Metal plates—Flaw detection method by the ultrasonic plate wave 金属板材超声板波探伤方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31932-2015 |
Method for electromagnetic automatic ultrasonic testing for thicker steel plates 厚钢板电磁超声自动检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31925-2015 |
ultrasonic test methods of heavy wall thickness seamless steel pipes and tubes 厚壁无缝钢管超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18256-2015 |
Non-destructive testing of steel tubes—Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness 钢管无损检测 用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31213.2-2014 |
Non-destructive testing―Testing of cast iron equipments and components―Part 2: Test method for acousto-ultrasonic 无损检测 铸铁构件检测 第2部分：声超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31213.1-2014 |
Non-destructive testing—Testing of cast iron equipments and components―Part 1: Test method for ultrasonic 无损检测 铸铁构件检测 第1部分：超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 31211-2014 |
Non-destructive testing―ultrasonic guided wave testing―General principle 无损检测 超声导波检测 总则 |
China National Standards ultrasonic |
English PDF |
| GB/T 30500-2014 |
ultrasonic gas flow meter performance online audit―Method using speed of sound checking 气体超声流量计使用中检验 声速检验法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18604-2014 |
Measurement of natural gas flow by gas ultrasonic flow meters 用气体超声流量计测量天然气流量 |
China National Standards ultrasonic |
English PDF |
| GB/T 6519-2013 |
ultrasonic inspection of wrought aluminium and magnesium alloy products 变形铝、镁合金产品超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 29712-2013 |
Non-destructive testing of welds - ultrasonic testing - Acceptance levels 焊缝无损检测 超声检测 验收等级 |
China National Standards ultrasonic |
English PDF |
| GB/T 29711-2013 |
Non-destructive testing of welds - ultrasonic testing - Characterization of indications in welds 焊缝无损检测 超声检测 焊缝中的显示特征 |
China National Standards ultrasonic |
English PDF |
| GB/T 11345-2013 |
Non-destructive testing of welds - ultrasonic testing - Techniques, testing levels, and assessment 焊缝无损检测 超声检测 技术、检测等级和评定 |
China National Standards ultrasonic |
English PDF |
| GB/T 29023.1-2012 |
Measurement and characterization of particles by acoustic methods - Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy 超声法颗粒测量与表征 第1部分：超声衰减谱法的概念和过程 |
China National Standards ultrasonic |
English PDF |
| GB/T 29461-2012 |
ultrasonic testing for electrofusion joint of polyethylene pipe 聚乙烯管道电熔接头超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 29302-2012 |
Non-destructive testing instruments - Characterization and verification of phased array ultrasonic examination systems 无损检测仪器 相控阵超声检测系统的性能与检验 |
China National Standards ultrasonic |
English PDF |
| GB/T 50818-2013 |
Mechanized ultrasonic testing technology specification for oil & gas construction pipeline project 石油天然气管道工程全自动超声波检测技术规范 |
China National Standards ultrasonic |
English PDF |
| GB/T 28764-2012 |
Test method for sealing characteristics of packaging containers - ultrasonic method 包装容器密闭性检测方法 超声波法 |
China National Standards ultrasonic |
English PDF |
| GB/T 28880-2012 |
Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments 无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定 |
China National Standards ultrasonic |
English PDF |
| GB/T 28704-2012 |
Non-destructive testing - Test method for ultrasonic guided wave testing based on magnetostrictive effects 无损检测 磁致伸缩超声导波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 19799.2-2012 |
Non-destructive testing - ultrasonic testing - Specification for calibration block No.2 无损检测 超声检测 2号校准试块 |
China National Standards ultrasonic |
English PDF |
| GB/T 11826.2-2012 |
Current meter and flow meter - Part 2: ultrasonic current meter 流速流量仪器 第2部分：声学流速仪 |
China National Standards ultrasonic |
English PDF |
| GB/T 27664.3-2012 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment 无损检测 超声检测设备的性能与检验 第3部分：组合设备 |
China National Standards ultrasonic |
English PDF |
| GB/T 28297-2012 |
Thicker steel plates - Method for automatic ultrasonic testing 厚钢板超声自动检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 11828.4-2011 |
Instruments for stage measurement - Part 4: ultrasonic stage gauge 水位测量仪器 第4部分：超声波水位计 |
China National Standards ultrasonic |
English PDF |
| GB/T 27669-2011 |
Non-destructive testing - ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments 无损检测 超声检测 超声检测仪电性能评定 |
China National Standards ultrasonic |
English PDF |
| GB/T 27664.2-2011 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2：Probes 无损检测 超声检测设备的性能与检验 第2部分：探头 |
China National Standards ultrasonic |
English PDF |
| GB/T 27664.1-2011 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1：Instruments 无损检测 超声检测设备的性能与检验 第1部分：仪器 |
China National Standards ultrasonic |
English PDF |
| GB/T 2900.88-2011 |
Electrotechnical terminology - ultrasonics 电工术语 超声学 |
China National Standards ultrasonic |
English PDF |
| GB/T 3310-2010 |
ultrasonic testing method of copper and copper alloy bars 铜及铜合金棒材超声波探伤方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 25759-2010 |
Non-destructive testing - Guide for data fields for computerized transfer of digital ultrasonic examination data 无损检测 数字化超声检测数据的计算机传输数据段指南 |
China National Standards ultrasonic |
English PDF |
| GB/T 7233.2-2010 |
Steel castings - ultrasonic examination - Part 2: Steel castings for highly stressed components 铸钢件 超声检测 第2部分：高承压铸钢件 |
China National Standards ultrasonic |
English PDF |
| GB/T 25151.1-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 1: ultrasonic examination on the automatic strip overlay welds of stainless steel 尿素高压设备制造检验方法 第1部分：不锈钢带极自动堆焊层超声波检测 |
China National Standards ultrasonic |
English PDF |
| GB 10152-2009 |
B mode ultrasonic diagnostic equipment B型超声诊断设备 |
China National Standards ultrasonic |
English PDF |
| GB/T 20935.3-2009 |
Method of electromagnetic acoustic inspection for metal materials - Part 3: Standard test method for ultrasonic surface examinations using electromagnetic acoustic transducer(EMAT)techniques 金属材料电磁超声检验方法 第3部分：利用电磁超声换能器技术进行超声表面检测的方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 20935.2-2009 |
Method of electromagnetic acoustic inspection for metal materials - Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer(EMAT)techniques 金属材料电磁超声检验方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 7233.1-2009 |
Steel castings - ultrasonic examination - Part 1: Steel castings for general purposes 铸钢件 超声检测 第1部分：一般用途铸钢件 |
China National Standards ultrasonic |
English PDF |
| GB/T 7966-2009 |
Acoustics - ultrasonics power measurement - Radiation force balances and performance requirements 声学 超声功率测量 辐射力天平法及性能要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 23900-2009 |
Non-destructive testing - Practice for measuring ultrasonic velocity in materials 无损检测 材料超声速度测量方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 23912-2009 |
Non-destructive testing - Practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves 无损检测 液浸式超声纵波脉冲反射检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 23908-2009 |
Non-destructive testing - Practice for ultrasonic pulse-echo straight-beam testing by the contact method 无损检测 接触式超声脉冲回波直射检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 23905-2009 |
Non-destructive testing - Blocks for ultrasonic testing 无损检测 超声检测用试块 |
China National Standards ultrasonic |
English PDF |
| GB/T 23904-2009 |
Non-destructive testing - Test method for ultrasonic testing by surface wave 无损检测 超声表面波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 23902-2009 |
Non-destructive testing - ultrasonic examination - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities 无损检测 超声检测 超声衍射声时技术检测和评价方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 14896.4-2009 |
Non-traditional machines - Terminology - Part 4: ultrasonic machines 特种加工机床 术语 第4部分：超声加工机床 |
China National Standards ultrasonic |
English PDF |
| GB/T 15214-2008 |
Requirements and methods of reliability test for ultrasonic diagnostic equipment 超声诊断设备可靠性试验要求和方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 7736-2008 |
ultrasonic inspecting method for macro-structure and imperfection of steel 钢的低倍缺陷超声波检验法 |
China National Standards ultrasonic |
English PDF |
| GB/T 1786-2008 |
Forging tortillas ultrasonic testing method 锻制圆饼超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 5777-2008 |
Seamless steel pipe and tubing methods for ultrasonic testing 无缝钢管超声波探伤检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 15830-2008 |
Non-destructive testing - Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes 无损检测 钢制管道环向焊缝对接接头超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 11344-2008 |
Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method 无损检测 接触式超声脉冲回波法测厚方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 11259-2008 |
Non-destructive testing - Practice for fabrication and control of steel reference blocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作与检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 22131-2008 |
Practice for ultrasonic examination from bored surfaces of cylindrical forgings 筒形锻件内表面超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 21939-2008 |
Earth-moving machinery - Warning devices for slow-moving machines - ultrasonic and other systems 土方机械 低速机器报警装置 超声波及其它系统 |
China National Standards ultrasonic |
English PDF |
| GB/T 6402-2008 |
Steel forgings - Method for ultrasonic testing 钢锻件超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 4162-2008 |
Forged and rolled steel bars - Method for ultrasonic testing 锻轧钢棒超声检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 11343-2008 |
Non-destructive testing - Practice for ultrasonic angle-beam testing by the contact method 无损检测 接触式超声斜射检测方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 16846-2008 |
Requirement for the declaration of the acoustic output of medical diagnostic ultrasonic equipment 医用超声诊断设备声输出公布要求 |
China National Standards ultrasonic |
English PDF |
| GB 9706.9-2008 |
Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment 医用电气设备 第2-37部分：超声诊断和监护设备安全专用要求 |
China National Standards ultrasonic |
English PDF |
| GB 9706.7-2008 |
Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment 医用电气设备 第2-5部分：超声理疗设备安全专用要求 |
China National Standards ultrasonic |
English PDF |
| GB/T 15261-2008 |
Measurement methods for acoustic properties of ultrasonically tissue-mimicking materials 超声仿组织材料声学特性的测量方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 5193-2007 |
Method of ultrasonic inspection for wrought titanium and titanium alloy products 钛及钛合金加工产品超声波探伤方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 12969.1-2007 |
Method of ultrasonic inspection for titanium and titanium alloy tubes 钛及钛合金管材超声波探伤方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 20490-2006 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - ultrasonic testing for the detection of laminar imperfections 承压无缝和焊接（埋弧焊除外）钢管分层的超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 20249-2006 |
Acoustics - Definitions and measurement methods for the transmitted fields of focusing ultrasonic transducers 声学 聚焦超声换能器发射场特性的定义与测量方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 19799.1-2005 |
Non-destructive testing-ultrasonic testing-Calibration block No.1 无损检测 超声检测 1 号校准试块 |
China National Standards ultrasonic |
English PDF |
| GB/T 12604.1-2005 |
Non-destructive testing-Terminology-Terms used in ultrasonic testing 无损检测 术语 超声检测 |
China National Standards ultrasonic |
English PDF |
| GB/T 7734-2004 |
Method for ultrasonic testing of clad steel plates 复合钢板超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 2970-2004 |
Thicker steel plates--Method for ultrasonic inspection 厚钢板超声波检验方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18852-2002 |
ultrasonic non-destructive testing--Reference blocks and test procedures for thc characterization of contact search unit beam profiles 无损检测 超声检验 测量接触探头声束特性的参考试块和方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18694-2002 |
Non-destructive testing--ultrasonic inspection--Characterization of search unit and sound field 无损检测 超声检验 探头及其声场的表征 |
China National Standards ultrasonic |
English PDF |
| GB/T 8361-2001 |
The surface of cold drawn rounds steel--Method for the ultrasonic inspection 冷拉圆钢表面超声波探伤方法 |
China National Standards ultrasonic |
English PDF |
| GB/T 18329.1-2001 |
Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings 滑动轴承 多层金属滑动轴承结合强度的超声波无损检验 |
China National Standards ultrasonic |
English PDF |
| GB/T 18256-2000 |
Welded steel tubes(except submerged arc-welded)--ultrasonic testing for verification of hydraulic leak-tightness 焊接钢管(埋弧焊除外) 用于确认水压密实性的超声波检测方法 |
China National Standards ultrasonic |
English PDF |
| GB 10408.2-2000 |
Detectors for intruder alarm systems--Part 2:ultrasonic Doppler detectors for use in buildings 入侵探测器 第2部分:室内用超声波多普勒探测器 |
China National Standards ultrasonic |
English PDF |
| GB/T 17252-1998 |
Acoustics--Characteristics and measurements of ultrasonic piezoelectric transducers up to 100kHz 声学 100 kHz以下超声压电换能器的特性和测量 |
China National Standards ultrasonic |
English PDF |
| GB/T 16540-1996 |
Acoustics--Measurement and characterisation of ultrasonic fields in the frequency range 0.5MHz to 15MHz--Hydrophone method 声学 在0.5～15 MHz频率范围内的超声场特性及其测量水听器法 |
China National Standards ultrasonic |
English PDF |
| GB/T 14368-1993 |
Acoustics--Standard ultrasonic power source 声学 标准超声功率源 |
China National Standards ultrasonic |
English PDF |
| Find out:189Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
