Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 11356.2-2023 |
Belt drives - Inspection of normal and narrow V-pulley grooves - Part 2: Effective width system {译} 带传动 普通和窄V带轮槽形检验 第2部分：有效宽度制 |
China National Standards width |
 English PDF |
| GB/T 13575.1-2022 |
Ordinary and narrow V-belt drives - Part 1: Reference width system {译} 普通和窄V带传动 第1部分：基准宽度制 |
China National Standards width |
English PDF |
| GB/T 13575.2-2022 |
Ordinary and narrow V-belt drives - Part 2: Effective width control {译} 普通和窄V带传动 第2部分：有效宽度制 |
China National Standards width |
English PDF |
| GB/T 15972.41-2021 |
Specifications for optical fibre test methods-Part 41:Measurement methods and test procedures for transmission characteristics-Bandwidth 光纤试验方法规范 第41部分：传输特性的测量方法和试验程序 带宽 |
China National Standards width |
English PDF |
| GB/T 39823-2021 |
Light conveyor belts—Tolerances on widths and lengths of cut light conveyor belts 轻型输送带 切割式轻型输送带的宽度和长度极限偏差 |
China National Standards width |
English PDF |
| GB/T 4490-2021 |
Conveyor belts with textile carcass—widths and lengths 织物芯输送带 宽度和长度 |
China National Standards width |
English PDF |
| GB/T 20346.1-2021 |
Equipment for distributing fertilizer—Part 1: Full width fertilizer distributors 施肥机械 第1部分：全幅宽撒肥机 |
China National Standards width |
English PDF |
| GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 |
China National Standards width |
English PDF |
| GB/T 36053-2018 |
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting X射线反射法测量薄膜的厚度、密度和界面宽度 仪器要求、准直和定位、数据采集、数据分析和报告 |
China National Standards width |
English PDF |
| GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards width |
English PDF |
| GB/T 1149.15-2017 |
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron 内燃机 活塞环 第15部分：薄型铸铁螺旋撑簧油环 |
China National Standards width |
English PDF |
| GB/T 15788-2017 |
Geosynthetics—Wide-width tensile test 土工合成材料 宽条拉伸试验方法 |
China National Standards width |
English PDF |
| GB/T 32370-2015 |
Determination of the length and width for adhesive tapes 胶粘带长度和宽度的测定 |
China National Standards width |
English PDF |
| GB/T 32188-2015 |
The method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate 氮化镓单晶衬底片x射线双晶摇摆曲线半高宽测试方法 |
China National Standards width |
English PDF |
| GB/T 32076.7-2015 |
High-strength structural bolting assemblies for preloading—Part 7: M39~M64—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第7部分：M39~M64 大六角头螺栓和螺母连接副 |
China National Standards width |
English PDF |
| GB/T 32076.4-2015 |
High-strength structural bolting assemblies for preloading—Part 4: System HV—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第4部分：HV型 大六角头螺栓和螺母连接副 |
China National Standards width |
English PDF |
| GB/T 32076.3-2015 |
High-strength structural bolting assemblies for preloading—Part 3: System HR—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第3部分：HR型 大六角头螺栓和螺母连接副 |
China National Standards width |
English PDF |
| GB/T 30167.2-2013 |
Textile machinery―Weaving machine temples―Part 2: Full-width temples 纺织机械 织机边撑 第2部分：全幅边撑 |
China National Standards width |
English PDF |
| GB/T 30165-2013 |
Textile machinery and accessories―Latch-type needles for knitting machines―Coordination of shank widths and hook heights 纺织机械与附件 针织机用舌针 针杆厚度和针钩高度的对应尺寸 |
China National Standards width |
English PDF |
| GB/T 7689.3-2013 |
Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length 增强材料 机织物试验方法 第3部分：宽度和长度的测定 |
China National Standards width |
English PDF |
| GB/T 4389-2013 |
Double-headed open-ended wrenches,double-headed box wrenches and combination wrenches - Maximum widths of heads 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸 |
China National Standards width |
English PDF |
| GB/T 16989-2013 |
Geosynthetics - Tensile test for joints/seams by wide-width strip method 土工合成材料 接头/接缝宽条拉伸试验方法 |
China National Standards width |
English PDF |
| GB/T 11544-2012 |
Belt drives - Classical and narrow V-belts - Dimensions(system based on datum width) 带传动 普通V带和窄V带 尺寸（基准宽度制） |
China National Standards width |
English PDF |
| GB/T 13739-2011 |
Test methods for laser beam widths,divergence angle and transverse mode 激光光束宽度、发散角的测试方法以及横模的鉴别方法 |
China National Standards width |
English PDF |
| GB/T 26599.1-2011 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beam 激光和激光相关设备 激光光束宽度、发散角和光束传输比的试验方法 第1部分：无像散和简单像散光束 |
China National Standards width |
English PDF |
| GB/T 15391-2010 |
Dimension,shape and tolerances for cold-rolled steel strips with a width less than 600mm 宽度小于600mm冷轧钢带的尺寸、外形及允许偏差 |
China National Standards width |
English PDF |
| GB/T 24535-2009 |
Inspection of grain and oil - Determination for ratio of length to width of paddy 粮油检验 稻谷粒型检验方法 |
China National Standards width |
English PDF |
| GB/T 4490-2009 |
Conveyor belts with textile carcass - widths and lengths 织物芯输送带 宽度和长度 |
China National Standards width |
English PDF |
| GB/T 15305.3-2009 |
Coated abrasives - Abrasive belts - Selection of width/length combinations 涂附磨具 砂带 宽度与长度组合的选择 |
China National Standards width |
English PDF |
| GB/T 4666-2009 |
Textiles - Fabrics - Determination of width and length 纺织品 织物长度和幅宽的测定 |
China National Standards width |
English PDF |
| GB/T 1930-2009 |
Method for determination of the annual rings width and latewood rate of wood 木材年轮宽度和晚材率测定方法 |
China National Standards width |
English PDF |
| GB/T 13575.1-2008 |
Classical and narrow V-belt drives - Part 1:System based on datum width 普通和窄V带传动 第1部分：基准宽度制 |
China National Standards width |
English PDF |
| GB/T 11356.1-2008 |
Belt drives - Pulleys for V-belts (system based on datum width) -Geometrical inspection of grooves 带传动 V带轮(基准宽度制) 槽形检验 |
China National Standards width |
English PDF |
| GB/T 15972.41-2008 |
Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth 光纤试验方法规范 第41部分：传输特性和光学特性的测量方法和试验程序 带宽 |
China National Standards width |
English PDF |
| GB/T 2778-2007 |
Power take-off pulley for agricultural tractors - Peripheral speed and width 农业拖拉机动力输出皮带轮 圆周速度和宽度 |
China National Standards width |
English PDF |
| GB/T 328.7-2007 |
Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness 建筑防水卷材试验方法 第7部分：高分子防水卷材 长度、宽度、平直度和平整度 |
China National Standards width |
English PDF |
| GB/T 328.6-2007 |
Test methods for building sheets for waterproofing - Part 6: Bitumen sheets for waterproofing-length,width and straightness 建筑防水卷材试验方法 第6部分：沥青防水卷材 长度、宽度和平直度 |
China National Standards width |
English PDF |
| GB/T 20346.1-2006 |
Equipment for distributing fertilizers - Test methods - Part 1: Full width fertilizer distributors 施肥机械 试验方法 第1部分: 全幅宽施肥机 |
China National Standards width |
English PDF |
| GB/T 20086-2006 |
Equipment for working the soil - Roller sections - Coupling and section width 土壤耕作机械 镇压器 联接方式和工作幅宽 |
China National Standards width |
English PDF |
| GB/T 15788-2005 |
Geotextiles and geotextile-related products-Wide width tensile test 土工布及其有关产品 宽条拉伸试验方法 |
China National Standards width |
English PDF |
| GB/T 19991-2005 |
Agricultural machinery - Equipment for sowing, planting, distributing fertilizers and spraying - Recommended working widths 农业机械 播种、种植、施肥和喷雾机械 推荐工作幅宽 |
China National Standards width |
English PDF |
| GB/T 20038-2005 |
Textile machinery -- Dyeing and finishing machines -- Definitions and range of nominal widths 纺织机械 染整机器 公称宽度的定义和系列 |
China National Standards width |
English PDF |
| GB/T 19551-2004 |
Textile machinery--Warp sizing machines--Maximum usable width 纺织机械 浆纱机 最大有效宽度 |
China National Standards width |
English PDF |
| GB/T 10097-2003 |
Textile machineryand accessories--Worsted and woollen cards-- width of cylinder and width on thewire 纺织机械与附件 精纺、粗纺梳毛机 锡林宽度和针布宽度 |
China National Standards width |
English PDF |
| GB/T 8461-2003 |
Textile machineryand accessories--Cone sectional warping machines--Maximum usable width 纺织机械与附件 圆锥滚筒分条整经机 最大有效宽度 |
China National Standards width |
English PDF |
| GB/T 10413-2002 |
Grooved pulleys for narrow V-belts(system based on effective width) 窄V带轮(有效宽度制) |
China National Standards width |
English PDF |
| GB/T 10412-2002 |
Grooved pulleys for classical and narrow V-belts (system based on datum width) 普通和窄V带轮(基准宽度制) |
China National Standards width |
English PDF |
| GB/T 6673-2001 |
Plastics film and sheeting--Determination of length and width 塑料薄膜和薄片长度和宽度的测定 |
China National Standards width |
English PDF |
| GB/T 18230.4-2000 |
Hexagon nuts for structural boltingwith large width across flats，style 1--Product grade B--Property class 10 栓接结构用1型大六角螺母 B级 10级 |
China National Standards width |
English PDF |
| GB/T 18230.3-2000 |
Hexagon nuts for high-strength structural bolting with large width across flats--Product grade B--Property classes8 and 10 栓接结构用大六角螺母 B级 8和10级 |
China National Standards width |
English PDF |
| GB/T 18230.2-2000 |
Hexagon bolts forhigh-strength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和10.9级 |
China National Standards width |
English PDF |
| GB/T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards width |
English PDF |
| GB/T 4639-2000 |
Cinematography--Monophonic 35mm negative photographic sound record on 35 mm motion-picture film--Position and maximum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸 |
China National Standards width |
English PDF |
| GB/T 11356.2-1997 |
Belt drives--Pulley for classical and narrow V-belts drives(system based on effective width)--Geometrical inspection of grooves 带传动 普通及窄V带传动用带轮(有效宽度制) 槽形检验 |
China National Standards width |
English PDF |
| GB/T 4637-1994 |
Head gaps andsound records for three-，four-，or six-track magnetic sound records on 35mmmotion-picture film containing no picture--Positions and width dimensions 35mm磁片上三声轨、四声轨和六声轨磁头隙缝的位置和宽度尺寸 |
China National Standards width |
English PDF |
| GB/T 3261-1993 |
Office machines andprinting machines used for information processing--widths of fabric printing ribbons 信息处理用办公机器和打印机使用的编织打印色带的宽度 |
China National Standards width |
English PDF |
| GB/T 13999-1992 |
Two-track photographic soundrecords on 35mm motion-picture prints--Positions and width dimensions 35mm电影拷贝上光学双声迹的位置和宽度尺寸 |
China National Standards width |
English PDF |
| GB/T 3104-1982 |
Fasteners--widths across flats of hexagon products 紧固件 六角产品的对边宽度 |
China National Standards width |
English PDF |
| GB/T 2020-1980 |
Recording magnetic tape with 9 magnetic tracks， 12.7mm width and 32 lines/mm for informationprocessing exchange 信息处理交换用9磁道12.7毫米宽32行/毫米记录磁带 |
China National Standards width |
English PDF |
| Find out:59Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
