Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6568-2024 |
Shielding clothing for live working {译} 带电作业用屏蔽服装 |
China National Standards working |
 English PDF |
| GB/T 43829-2024 |
Telecontrol equipment and systems-Part 2: working conditions-Part 1: Power supply and electromagnetic compatibility {译} 农村粪污集中处理设施建设与管理规范 |
China National Standards working |
English PDF |
| GB/T 1504-2024 |
Information technology-Remote communication and information exchange between systems-Visual networking system requirements {译} 铸铁轧辊 |
China National Standards working |
English PDF |
| GB/T 43231-2023 |
Petroleum and natural gas industry Shale oil and gas well casing selection and working condition suitability evaluation {译} 石油天然气工业 页岩油气井套管选用及工况适用性评价 |
China National Standards working |
English PDF |
| GB/T 42982-2023 |
Calculation method of average working time between failures for industrial robots {译} 工业机器人平均无故障工作时间计算方法 |
China National Standards working |
English PDF |
| GB/T 15000.8-2023 |
Standard Sample working Guidelines Part 8: Use of Standard Samples {译} 标准样品工作导则 第8部分：标准样品的使用 |
China National Standards working |
English PDF |
| GB/T 42891-2023 |
Technical requirements for broadband customer network networking based on public telecommunications networks Multi-input multiple-output (MIMO) universal medium wired networking {译} 基于公用电信网的宽带客户网络联网技术要求 多入多出（MIMO）的通用介质有线联网 |
China National Standards working |
English PDF |
| GB/T 15000.5-2023 |
Standard Sample working Guidelines Part 5: Internal Development of Quality Control Samples {译} 标准样品工作导则 第5部分：质量控制样品的内部研制 |
China National Standards working |
English PDF |
| GB/T 15000.3-2023 |
working guidelines for standard samples - Part 3: Standard samples - Determination and evaluation of homogeneity and stability {译} 标准样品工作导则 第3部分：标准样品 定值和均匀性与稳定性评估 |
China National Standards working |
English PDF |
| GB/T 42157.2-2023 |
Rough terrain forklifts - Non-integrated personnel working platforms - Part 2: Requirements for users {译} 越野叉车 非集成式人员工作平台 第2部分：对用户的要求 |
China National Standards working |
English PDF |
| GB/T 42157.1-2023 |
Rough terrain forklifts - Non-integrated personnel working platforms - Part 1: Design, safety requirements and verification {译} 越野叉车 非集成式人员工作平台 第1部分：设计、安全要求及验证 |
China National Standards working |
English PDF |
| GB/T 26765-2023 |
Motor vehicle safety technical inspection business information system and networking specification {译} 机动车安全技术检验业务信息系统及联网规范 |
China National Standards working |
English PDF |
| GB/T 28181-2022 |
Technical requirements for information transmission, exchange and control of public security video surveillance networking system {译} 公共安全视频监控联网系统信息传输、交换、控制技术要求 |
China National Standards working |
English PDF |
| GB/T 17489-2022 |
Hydraulic transmission Particulate contamination analysis Liquid sampling from working system piping {译} 液压传动 颗粒污染分析 从工作系统管路中提取液样 |
China National Standards working |
English PDF |
| GB/Z 41395-2022 |
Woodworking tool safety clamping device {译} 木工刀具安全 夹紧装置 |
China National Standards working |
English PDF |
| GB/Z 41595-2022 |
Safety of woodworking tools - Requirements for shanks of milling cutters {译} 木工刀具安全 柄铣刀柄部的要求 |
China National Standards working |
English PDF |
| GB 16993-2021 |
Safety regulations for avoid working under hazardous condition of oxygen deficiency in enclosed spaces aboard ships 防止船舶封闭处所缺氧危险作业安全规程 |
China National Standards working |
English PDF |
| GB/T 14286-2021 |
Terminology for live working tools, devices and equipment 带电作业工具设备术语 |
China National Standards working |
English PDF |
| GB/T 17934.8-2021 |
Graphic technology—Process control for the production of half-tone colour separations, proof and production prints—Part 8:Validation print processes working directly from digital data 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第8部分：直接使用数字数据的验证印刷品制作过程 |
China National Standards working |
English PDF |
| GB/T 17934.7-2021 |
Graphic technology—Process control for the production of half-tone colour separations,proof and production prints—Part 7:Proofing processes working directly from digital data 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第7部分：直接使用数字数据的打样过程 |
China National Standards working |
English PDF |
| GB 16993-2021 |
Safety regulations for avoid working under hazardous condition of oxygen deficiency in enclosed spaces aboard ships 防止船舶封闭处所缺氧危险作业安全规程 |
China National Standards working |
English PDF |
| GB/T 25281-2021 |
The clothing with safety sign for the working people on roads 道路作业人员安全标志服 |
China National Standards working |
English PDF |
| GB/T 24031-2021 |
The clothing with safety sign for the working people on roads 环境管理 环境绩效评价 指南 |
China National Standards working |
English PDF |
| GB/T 10395.5-2021 |
Agricultural machinery -- Safety -- Part 5: Power-driven soil-working machines 农业机械 安全 第5部分：驱动式耕作机械 |
China National Standards working |
English PDF |
| GB/T 15040-2021 |
working standard lamps for the measurement of luminous flux 工作测光标准灯泡 |
China National Standards working |
English PDF |
| GB/T 40646-2021 |
Technical requirements for broadband customer networking based on public telecommunication network -- Optical camera communications 基于公用电信网的宽带客户网络联网技术要求 可见光成像通信 |
China National Standards working |
English PDF |
| GB/T 39519-2020 |
Hydranlic cylindrically helical compression spring with high working stress—Technical specifications 高应力液压件圆柱螺旋压缩弹簧 技术条件 |
China National Standards working |
English PDF |
| GB/T 38832-2020 |
Technical requirements of broadband customer networking based on public telecommunication network—High-speed visible light communications under lighting constrains 基于公用电信网的宽带客户网络联网技术要求 通照一体化高速可见光通信 |
China National Standards working |
English PDF |
| GB/T 39581-2020 |
Biological disaster prevention and early warning system based on public communication network—General technical requirements for networking 基于公用通信网的生物灾害防治和预警系统 联网总体技术要求 |
China National Standards working |
English PDF |
| GB/T 39272-2020 |
Test specifications for video surveillance networking for public security 公共安全视频监控联网技术测试规范 |
China National Standards working |
English PDF |
| GB/T 17888.2-2020 |
Safety of machinery—Permanent means of access to machinery—Part 2: working platforms and walkways 机械安全 接近机械的固定设施 第2部分：工作平台与通道 |
China National Standards working |
English PDF |
| GB/T 37556-2019 |
Insulating aerial device for 10kV live working 10kV带电作业用绝缘斗臂车 |
China National Standards working |
English PDF |
| GB/T 37516-2019 |
Specification of care services for intellectual, mental and severe physical disabilities at working age 就业年龄段智力、精神及重度肢体残疾人托养服务规范 |
China National Standards working |
English PDF |
| GB/T 18857-2019 |
Technical guide for live working on distribution line 配电线路带电作业技术导则 |
China National Standards working |
English PDF |
| GB/T 25196-2018 |
Cranes—Monitoring for crane design working period 起重机-设计工作周期的监控 |
China National Standards working |
English PDF |
| GB/T 34867.1-2017 |
Procedures for measurement and verification of motor-system energy-savings—Part 1: Test procedures on working site for energy efficiency of motor 电动机系统节能量测量和验证方法 第1部分：电动机现场能效测试方法 |
China National Standards working |
English PDF |
| GB/T 25102.8-2017 |
Electroacoustics—Hearing aids—Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions 电声学 助听器 第8部分：模拟实际工作条件下的助听器性能测量方法 |
China National Standards working |
English PDF |
| GB/T 34690.2-2017 |
Graphic technology—Digitalized process control for offset printing—Part 2: working environment 印刷技术 胶印数字化过程控制 第2部分：作业环境 |
China National Standards working |
English PDF |
| GB/T 34394-2017 |
Maximum working load for flat pallets 平托盘最大工作载荷 |
China National Standards working |
English PDF |
| GB/T 34569-2017 |
Simulation training system for live working 带电作业仿真训练系统 |
China National Standards working |
English PDF |
| GB/T 34577-2017 |
Technical guide for by-pass working on distribution line 配电线路旁路作业技术导则 |
China National Standards working |
English PDF |
| GB/T 34618-2017 |
Temperature detection method for judging internal leakage faults of working valves in steam drainage steam 蒸汽疏水系统在线阀门内漏温度检测方法 |
China National Standards working |
English PDF |
| GB/T 34174-2017 |
Surface chemical analysis—Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation 表面化学分析 工作参考物质中离子注入产生的驻留面剂量定值的推荐程序 |
China National Standards working |
English PDF |
| GB/T 20441.5-2017 |
Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison 电声学 测量传声器 第5部分：工作标准传声器声压校准的比较法 |
China National Standards working |
English PDF |
| GB/T 9574-2017 |
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards working |
English PDF |
| GB/T 33944-2017 |
Mobile detachable working towers—Safety technical criterion 移动式可拆卸工作塔台 安全技术规范 |
China National Standards working |
English PDF |
| GB/T 33854-2017 |
Networking specification for broadband customer network based on public telecommunication network—PLC networking 基于公用电信网的宽带客户网络联网技术要求 电力线联网 |
China National Standards working |
English PDF |
| GB/T 32812-2016 |
Metal working fluid—Limit requirements and determination methods of hazardous substance 金属加工液 有害物质的限量要求和测定方法 |
China National Standards working |
English PDF |
| GB/T 32629-2016 |
Information technology—Biometric BioAPI interworking protocol 信息技术 生物特征识别应用程序接口的互通协议 |
China National Standards working |
English PDF |
| GB/T 2900.55-2016 |
Electrotechnical terminology—Live working 电工术语 带电作业 |
China National Standards working |
English PDF |
| GB/T 7123.1-2015 |
Determination of the working life of multi-component adhesives 多组分胶粘剂可操作时间的测定 |
China National Standards working |
English PDF |
| GB/T 31255-2014 |
Safety of machinery―Safety specification for the design of industrial type stairs, working platforms and walkways 机械安全 工业楼梯、工作平台和通道的安全设计规范 |
China National Standards working |
English PDF |
| GB 31146-2014 |
Safety of woodworking machines―Double end tenoning and/or profiling machines fed by chain or chians 木工机床安全 链式双头开榫机 |
China National Standards working |
English PDF |
| GB 31145-2014 |
Safety of woodworking machines—Circular saw benches/up-cutting cross-cut sawing machines 木工机床安全 带上切式横截手动进给圆锯机 |
China National Standards working |
English PDF |
| GB 31144-2014 |
Safety of woodworking machines―Manual radial arm saws 木工机床安全 手动式摇臂锯 |
China National Standards working |
English PDF |
| GB/T 30701-2014 |
Surface chemical analysis―Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy 表面化学分析 硅片工作标准样品表面元素的化学收集方法和全反射X射线荧光光谱法(TXRF)测定 |
China National Standards working |
English PDF |
| GB 30461-2013 |
Safety of woodworking machines―Band sawing machines 木工机床安全 带锯机 |
China National Standards working |
English PDF |
| GB 30460-2013 |
Safety of woodworking machines―One side thickness planing machines 木工机床安全 单面压刨床 |
China National Standards working |
English PDF |
| GB 30459-2013 |
Safety of woodworking machines―Hand fed surface planing machines 木工机床安全 平刨床 |
China National Standards working |
English PDF |
| GB/T 30482-2013 |
Woodworking machines―Mortising machines with oscillating tool action―Nomenclature 木工机床 振荡式榫槽机 术语 |
China National Standards working |
English PDF |
| GB/T 30481-2013 |
Woodworking machines curtain coating machines―Nomenclature 木工机床 涂胶机 术语 |
China National Standards working |
English PDF |
| GB/T 30480-2013 |
Woodworking machines―Hand-loading veneering presses for flat surfaces―Nomenclature 木工机床 手动上料平面压机 术语 |
China National Standards working |
English PDF |
| GB/T 30479-2013 |
Woodworking machines―Crosswise veneer splicing machines―Nomenclature 木工机床 横向拼板机 术语 |
China National Standards working |
English PDF |
| GB/T 30478-2013 |
Woodworking machines―Circular sawing machines for building sites―Nomenclature 木工机床 建筑工地用圆锯机 术语 |
China National Standards working |
English PDF |
| GB/T 30477-2013 |
Wookworking machines―Double edging precision circular sawing machines―Nomenclature and acceptance conditions 木工机床 双修边精密圆锯机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 30476-2013 |
Woodworking machines―Single chain mortising machines―Nomenclature and acceptance conditions 木工机床 链式单轴榫槽机 术语和精度 |
China National Standards working |
English PDF |
| GB 10395.5-2013 |
Agricultural and forestry machinery - Safety - Part 5: Power-driven soil-working machines 农林机械 安全 第5部分：驱动式耕作机械 |
China National Standards working |
English PDF |
| GB/T 29198-2012 |
Technical requirements of adaptation layer of No.7 signalling interworking with IP—MTP2 peer-to-peer adaptation layer No.7信令与IP互通适配层技术要求 消息传递部分（MTP）第二级对等适配层（M2PA） |
China National Standards working |
English PDF |
| GB/T 9452-2012 |
Testing method for working zone of heat treatment furnace 热处理炉有效加热区测定方法 |
China National Standards working |
English PDF |
| GB 11652-2012 |
Technical regulations for the working safety of fireworks and firecrackers 烟花爆竹作业安全技术规程 |
China National Standards working |
English PDF |
| GB/T 28503-2012 |
Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 user adaptation layer No.7信令与IP互通适配层技术要求消息传递部分 （MTP）第二级用户适配层（M2UA） |
China National Standards working |
English PDF |
| GB/T 28502-2012 |
Technical requirement of interworking between No.7 signalling and IP No.7信令与IP互通的技术要求 |
China National Standards working |
English PDF |
| GB/T 27946-2011 |
Limited value of hazardous substance in the air of heat treatment working place 热处理工作场所空气中有害物质的限值 |
China National Standards working |
English PDF |
| GB/T 28059.4-2011 |
Image information management system for highway network - Platform networking and sharing - Part 4: User and equipment management 公路网图像信息管理系统 平台互联技术规范 第4部分：用户及设备管理 |
China National Standards working |
English PDF |
| GB/T 28059.3-2011 |
Image information management system for highway network - Platform networking and sharing - Part 3: Interface and communication protocol 公路网图像信息管理系统 平台互联技术规范 第3部分：接口与通信控制协议 |
China National Standards working |
English PDF |
| GB/T 28059.2-2011 |
Image information management system for public traffic network -Platform networking and sharing - Part 2: Video format and coding 公路网图像信息管理系统 平台互联技术规范 第2部分：视频格式与编码 |
China National Standards working |
English PDF |
| GB/T 28059.1-2011 |
Image information management system for highway network - Platform networking and sharing - Part 1: General specification 公路网图像信息管理系统 平台互联技术规范 第1部分：总则 |
China National Standards working |
English PDF |
| GB 27881-2011 |
Safety requirements for working on high voltage equipment underwater 水下高电压设备作业安全要求 |
China National Standards working |
English PDF |
| GB/T 17153-2011 |
General principles for interworking between public networks and between public networks and other networks for the provision of data transmission services 公用网之间以及公用网和提供数据传输业务的其他网之间互通的一般原则 |
China National Standards working |
English PDF |
| GB/T 26765-2011 |
Specifications for power-driven vehicle safety inspection business information system and networking 机动车安全技术检验业务信息系统及联网规范 |
China National Standards working |
English PDF |
| GB/Z 26211-2010 |
Discomfort glare in the interior working environment 室内工作环境的不舒适眩光 |
China National Standards working |
English PDF |
| GB/T 25925-2010 |
Industrial-process measurement and control instruments - Values of nominal working pressure 工业自动化仪表 公称工作压力值系列 |
China National Standards working |
English PDF |
| GB/T 25726-2010 |
Screen clothes for live working on 1000kV AC 1000kV交流带电作业用屏蔽服装 |
China National Standards working |
English PDF |
| GB/T 25725-2010 |
Special purpose vehicle for live working tools 带电作业工具专用车 |
China National Standards working |
English PDF |
| GB 25490-2010 |
Safety of woodworking machines - Single end tenoning machines with sliding table 木工机床安全 带移动工作台单头开榫机 |
China National Standards working |
English PDF |
| GB 12557-2010 |
Woodworking machines - Safety code 木工机床 安全通则 |
China National Standards working |
English PDF |
| GB/T 14384-2010 |
Woodworking machines - General specifications 木工机床 通用技术条件 |
China National Standards working |
English PDF |
| GB/T 25281-2010 |
The vest with safety sign for the working people on roads 道路作业人员安全标志服 |
China National Standards working |
English PDF |
| GB/T 14388-2010 |
Tungsten carbide tipped circular saw blade for woodworking 木工硬质合金圆锯片 |
China National Standards working |
English PDF |
| GB/T 12448-2010 |
Woodworking machines - Programming method for the types 木工机床 型号编制方法 |
China National Standards working |
English PDF |
| GB/T 10961-2010 |
Woodworking machines - Symbols for indications 木工机床 操作指示形象化符号 |
China National Standards working |
English PDF |
| GB/T 25098-2010 |
Live washing regulation of insulating live-working washing agent 绝缘体带电清洗剂使用导则 |
China National Standards working |
English PDF |
| GB/T 25097-2010 |
Insulating live-working washing agent 绝缘体带电清洗剂 |
China National Standards working |
English PDF |
| GB/T 23811-2009 |
working principles for food safety risk analysis 食品安全风险分析工作原则 |
China National Standards working |
English PDF |
| GB/T 13386-2009 |
Technical requirements for hot working of sea going transport ships 海洋营运船舶明火作业安全技术要求 |
China National Standards working |
English PDF |
| GB/T 22801-2009 |
Textile machinery - Guide rollers for dyeing and finishing machinery - Main dimensions and working performance requirements 纺织机械 染整机器导布辊 主要尺寸及要求 |
China National Standards working |
English PDF |
| GB/T 23316-2009 |
Anti-static requirement and test methods of working clothing 工作服 防静电性能的要求及试验方法 |
China National Standards working |
English PDF |
| GB/T 14163-2009 |
Classification of working-hours consumption symbols and composition of standard working-hours 工时消耗分类、代号和标准工时构成 |
China National Standards working |
English PDF |
| GB/T 18857-2008 |
Technical guide for live working in distribution line 配电线路带电作业技术导则 |
China National Standards working |
English PDF |
| GB/T 17620-2008 |
Live working - Rigid ladders of insulating material 带电作业用绝缘硬梯 |
China National Standards working |
English PDF |
| GB/T 15632-2008 |
General specifications of wire holding tools for live working 带电作业用提线工具通用技术条件 |
China National Standards working |
English PDF |
| GB 13398-2008 |
Insulating hollow tubes and foam-filled tubes and solid rods for live working 带电作业用空心绝缘管、泡沫填充绝缘管和实心绝缘棒 |
China National Standards working |
English PDF |
| GB 15606-2008 |
General rules for safety production of woodworking shop 木工(材)车间安全生产通则 |
China National Standards working |
English PDF |
| GB 13746-2008 |
Safety and hygiene code for working with lead 铅作业安全卫生规程 |
China National Standards working |
English PDF |
| GB 22659-2008 |
Safety of woodworking machines - Numerically controlled (NC)boring machines and routing machines 木工机床安全 数控钻床和数控镂铣机 |
China National Standards working |
English PDF |
| GB/T 4200-2008 |
Classified standard of working in the hot environment 高温作业分级 |
China National Standards working |
English PDF |
| GB/T 13159-2008 |
Networking specifications for digital radio systems 数字微波通信系统进网技术要求 |
China National Standards working |
English PDF |
| GB/T 6568-2008 |
Screen clothes for live working 带电作业用屏蔽服装 |
China National Standards working |
English PDF |
| GB/T 19185-2008 |
Calculation method of live working minimum approach distance on a.c.transmission line 交流线路带电作业安全距离计算方法 |
China National Standards working |
English PDF |
| GB/T 18269-2008 |
Live working-Hand tools for use up to 1kV a.c .and 1.5kV d.c. 交流1kV、直流1.5kV及以下电压等级带电作业用绝缘手工工具 |
China National Standards working |
English PDF |
| GB/T 18037-2008 |
Technical requirements and design guide for live working tools 带电作业工具基本技术要求与设计导则 |
China National Standards working |
English PDF |
| GB/T 17622-2008 |
Live working - Gloves of insulating material 带电作业用绝缘手套 |
China National Standards working |
English PDF |
| GB/T 14545-2008 |
Washing tools with limited water for live working (Short water gun with long water column) 带电作业用小水量冲洗工具(长水柱短水枪型) |
China National Standards working |
English PDF |
| GB/T 14286-2008 |
Live working-Terminology for tools, equipment and devices 带电作业工具设备术语 |
China National Standards working |
English PDF |
| GB/T 13035-2008 |
Live working-insulating ropes 带电作业用绝缘绳索 |
China National Standards working |
English PDF |
| GB/T 13034-2008 |
Insulated pulleys for live working 带电作业用绝缘滑车 |
China National Standards working |
English PDF |
| GB/T 15377-2008 |
Terminology for Woodworking machines - Planing machines 木工机床术语 刨床 |
China National Standards working |
English PDF |
| GB/T 15376-2008 |
Wookworking machines - Turning lathes - Nomenclature and acceptance conditions 木工机床 普通车床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 14303-2008 |
Wookworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions 木工机床 单锯片圆锯机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 13572-2008 |
Wookworking machines - Planing machines for two-,three,or four-side dressing - Nomenclature and accetpance conditions 木工机床 二、三、四面刨床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 22205-2008 |
Hydrogeological classification of mining district or working face 煤矿采区或工作面水文地质条件分类 |
China National Standards working |
English PDF |
| GB 1260-2008 |
working chemical - Zinc oxide 工作基准试剂 氧化锌 |
China National Standards working |
English PDF |
| GB 12597-2008 |
working chemical - Benzoic acid 工作基准试剂 苯甲酸 |
China National Standards working |
English PDF |
| GB 12596-2008 |
working chemical - Calcium carbonate 工作基准试剂 碳酸钙 |
China National Standards working |
English PDF |
| GB 12595-2008 |
working chemical - Silver nitrate 工作基准试剂 硝酸银 |
China National Standards working |
English PDF |
| GB 12594-2008 |
working chemical - Potassium bromate 工作基准试剂 溴酸钾 |
China National Standards working |
English PDF |
| GB 1258-2008 |
working chemical - Potassium iodate 工作基准试剂 碘酸钾 |
China National Standards working |
English PDF |
| GB 1256-2008 |
working chemical - Arsenic trioxide 工作基准试剂 三氧化二砷 |
China National Standards working |
English PDF |
| GB 10736-2008 |
working chemical - Potassium chloride 工作基准试剂 氯化钾 |
China National Standards working |
English PDF |
| GB 20800.3-2008 |
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust 爆炸性环境用往复式内燃机防爆技术通则 第3部分：存在甲烷和（或）可燃性粉尘的地下矿区巷道用I类内燃机 |
China National Standards working |
English PDF |
| GB/T 21664-2008 |
working sampling methods 工作抽样方法 |
China National Standards working |
English PDF |
| GB/T 21691-2008 |
Woodworking machines - Bandsaw blade sharpening machines - Nomenclature 木工机床 带锯磨锯机 术语 |
China National Standards working |
English PDF |
| GB/T 21690-2008 |
Narrow bandsaw blades for woodworking - Dimensions 细木工带锯条 尺寸 |
China National Standards working |
English PDF |
| GB/T 21689-2008 |
Woodworking machines - Narrow belt sanding machines with sliding table or frame - Nomenclature 木工机床 窄带磨光机 术语 |
China National Standards working |
English PDF |
| GB/T 21688-2008 |
Woodworking machines - Single-end edge bonding machine - Nomenclature 木工机床 单面直线封边机 术语 |
China National Standards working |
English PDF |
| GB/T 21687-2008 |
Woodworking machines - Single-end tenoning machines with several spindles - Nomenclature 木工机床 单头多轴开榫机 术语 |
China National Standards working |
English PDF |
| GB/T 21686-2008 |
Woodworking machines - Slot mortising machines - Nomenclature and acceptance conditions 木工机床 卧式榫槽机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 21685-2008 |
Woodworking machines - Muti-spindle boring machines - Nomenclature 木工机床 多轴钻床 术语 |
China National Standards working |
English PDF |
| GB/T 21684-2008 |
Woodworking machines - Two-, three- and four-side moulding machines - Nomenclature and acceptance conditions 木工机床 二、三、四面铣床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 21683-2008 |
Woodworking machines - Universal tool and cutter sharpeners - Nomenclature 木工机床 万能磨刀机 术语 |
China National Standards working |
English PDF |
| GB/T 21680-2008 |
Circular saw blades for woodworking - Dimensions 木工圆锯片 尺寸 |
China National Standards working |
English PDF |
| GB/T 14386-2008 |
Woodworking machines - Surface planing and thicknessing machines - Nomenclature and acceptance conditions 木工机床 平压两用刨床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 14385-2008 |
Woodworking machines - Thickness planing machines with rotary cutterblock for one-side dressing - Nomenclature and acceptance conditions 木工机床 单面压刨床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 13571-2008 |
Woodworking machines - Single spindle boring machines - Nomenclature and acceptance conditions 木工机床 单轴钻床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 13570-2008 |
Woodworking machines - Single spindle moulding machines - Nomenclature and acceptance conditions 木工机床 单轴铣床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 13569-2008 |
Woodworking machines - Surface planing machines with cutterblock for one-side dressing - Nomenclature and acceptance conditions 木工机床 平刨床 术语和精度 |
China National Standards working |
English PDF |
| GB/T 13568-2008 |
Woodworking machines - Table bandsawing machines - Nomenclature and acceptance conditions 木工机床 细木工带锯机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 21641-2008 |
Technique requirements of video conferencing system inter working between different technologies 基于不同技术的应急视讯会议系统互通技术要求 |
China National Standards working |
English PDF |
| GB 17888.2-2008 |
Safety of machinery - Permanent means of access to machinery - Part 2: working platforms and walkways 机械安全 进入机械的固定设施 第2部分：工作平台和通道 |
China National Standards working |
English PDF |
| GB/T 12364-2007 |
Networking technical requirement for the Domestic(GSO/FSS) satellite communication system 国内卫星通信系统进网技术要求 |
China National Standards working |
English PDF |
| GB 12593-2007 |
working chemical - Ethylenediaminetetraacetic acid disodium salt 工作基准试剂 乙二胺四乙酸二钠 |
China National Standards working |
English PDF |
| GB 1257-2007 |
working chemical - Potassium hydrogen phthalate 工作基准试剂 邻苯二甲酸氢钾 |
China National Standards working |
English PDF |
| GB 1254-2007 |
working chemical - Sodium oxalate 工作基准试剂 草酸钠 |
China National Standards working |
English PDF |
| GB 1253-2007 |
working chemical - Sodium chloride 工作基准试剂 氯化钠 |
China National Standards working |
English PDF |
| GB 1259-2007 |
working chemical - Potassium dichromate 工作基准试剂 重铬酸钾 |
China National Standards working |
English PDF |
| GB 1255-2007 |
working chemical - Sodium carbonate anhydrous 工作基准试剂 无水碳酸钠 |
China National Standards working |
English PDF |
| GB 10738-2007 |
working chemical - General rules for assay - weight titration 工作基准试剂 含量测定通则 称量滴定法 |
China National Standards working |
English PDF |
| GB 10737-2007 |
working chemical - General rules for assay - Weight titration（potentiometric method） 工作基准试剂 含量测定通则 称量电位滴定法 |
China National Standards working |
English PDF |
| GB/T 20441.4-2006 |
Measurement microphones―Part 4: Specifications for working standard microphones 测量传声器 第4部分: 工作标准传声器规范 |
China National Standards working |
English PDF |
| GB 8958-2006 |
Safety regulation for working under hazardous condition of the oxygen deficiency 缺氧危险作业安全规程 |
China National Standards working |
English PDF |
| GB 20179-2006 |
Safety of woodworking machines - Circular saw benches (with or without travelling table) and dimension saw 木工机床安全 手动进给圆锯机和带移动工作台锯板机 |
China National Standards working |
English PDF |
| GB/T 12168-2006 |
Protective covers of insulating material for live working 带电作业用遮蔽罩 |
China National Standards working |
English PDF |
| GB/T 12167-2006 |
Aluminium alloy grip clamps of tension wire for live working 带电作业用铝合金紧线卡线器 |
China National Standards working |
English PDF |
| GB/T 20089-2006 |
Machinery and equipment for working the soil - Mouldboard plough working elements - Vocabulary 土壤耕作机械 铧式犁工作部件 词汇 |
China National Standards working |
English PDF |
| GB/T 20087-2006 |
Equipment for working the soil - Rotary cultivator blades - Fixing dimensions 土壤耕作机械 旋转式中耕机刀片 安装尺寸 |
China National Standards working |
English PDF |
| GB/T 20086-2006 |
Equipment for working the soil - Roller sections - Coupling and section width 土壤耕作机械 镇压器 联接方式和工作幅宽 |
China National Standards working |
English PDF |
| GB 12942-2006 |
Safety code for painting - Technical requirements of safety for working in confined spaces 涂装作业安全规程 有限空间作业安全技术要求 |
China National Standards working |
English PDF |
| GB 20179-2006 |
Safety of woodworking machines - Circular saw benches (with or without travelling table) and dimension saw 木工机床安全 手动进给圆锯机和带移动工作台锯板机 |
China National Standards working |
English PDF |
| GB 20007-2005 |
Safety of woodworking machines -- Single spindle moulding machines 木工机床安全 单轴铣床 |
China National Standards working |
English PDF |
| GB 20006-2005 |
Safety of woodworking machines -- Single spindle handfed/integrated fed routing machines 木工机床安全 镂铣机 |
China National Standards working |
English PDF |
| GB 19999-2005 |
Safety of woodworking machines -- Four-side Moulding Machines and four-side planing machies 木工机床安全 四面铣床和四面刨床 |
China National Standards working |
English PDF |
| GB/T 19992-2005 |
Woodworking machines Radial circular saws -- Nomenclature and acceptance conditions 木工机床 摇臂式圆锯机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 19991-2005 |
Agricultural machinery - Equipment for sowing, planting, distributing fertilizers and spraying - Recommended working widths 农业机械 播种、种植、施肥和喷雾机械 推荐工作幅宽 |
China National Standards working |
English PDF |
| GB/T 19990-2005 |
Equipment for working the soil-Fixing bolts for soil working element 土壤耕作机械 土壤工作部件固定螺栓 |
China National Standards working |
English PDF |
| GB/T 19989-2005 |
Equipment for working the soil-Hoe blades-Fixing dimensions 土壤耕作机械 锄铲 安装尺寸 |
China National Standards working |
English PDF |
| GB/T 19988-2005 |
Agricultural machinery-Equipment for working the soil S-tines:main dimensions and clearance zones 农业机械 土壤工作部件 S型弹齿 主要尺寸和间隙范围 |
China National Standards working |
English PDF |
| GB/T 19987-2005 |
Agricultural machinery-Equipment for working the soil S-tines:Test method 农业机械 土壤工作部件 S型弹齿 试验方法 |
China National Standards working |
English PDF |
| GB/T 19986-2005 |
Woodworking machines-Dise sanding machines with spindle in fixed position-Nomenclature 木工机床 盘式磨光机 术语 |
China National Standards working |
English PDF |
| GB/T 19985-2005 |
Woodworking machines-Routing machines-Nomenclature 木工机床 镂铣机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 19983-2005 |
Woodworking Machines-Doubleend tenoning machines-Nomenclature and acceptance conditions 木工机床 双头开榫机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 19982-2005 |
Woodworking machines-Diameters of spindles for receiving circular sawblades 木工机床 安装圆锯片处的主轴直径 |
China National Standards working |
English PDF |
| GB/T 10960-2005 |
Woodworking machines-Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels-Nomenclature and acceptance conditions 木工机床 锯片往复锯板机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 10959-2005 |
Woodworking machines-Single blade circular sawing machines with travelling table-Nomenclature and acceptance conditions 木工机床 带移动工作台锯板机 术语和精度 |
China National Standards working |
English PDF |
| GB/T 3871.12-2005 |
Agricultural Tractors-Test procedures-Part 12:working Tests 农业拖拉机 试验规程 第12部分 使用试验 |
China National Standards working |
English PDF |
| GB 18956-2003 |
Safety of woodworking machines--Surface planing and thicknessing machines 木工机床安全 平压两用刨床 |
China National Standards working |
English PDF |
| GB 18955-2003 |
Tools for woodworking，safety requirements--Milling tools，circular saw blades 木工刀具安全 铣刀、圆锯片 |
China National Standards working |
English PDF |
| GB/T 8843-2002 |
Terminology of working ship 工程船术语 |
China National Standards working |
English PDF |
| GB/T 7123.1-2002 |
Determination for working life of adhesives 胶粘剂适用期的测定 |
China National Standards working |
English PDF |
| GB/T 2900.55-2002 |
Electrotechnical terminology--Live working 电工术语 带电作业 |
China National Standards working |
English PDF |
| GB/T 18498-2001 |
Interworking between packet switched public data networks and public maritime mobile satellite data transmission systems 分组交换公用数据网和公用海事移动卫星数据传输系统之间的互通 |
China National Standards working |
English PDF |
| GB/T 9574-2001 |
Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure 橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率 |
China National Standards working |
English PDF |
| GB/T 18223-2000 |
Woodworking machines--Lifting tables and stages--Nomenclature 木工机床 升降台 术语 |
China National Standards working |
English PDF |
| GB/T 18222-2000 |
Woodworking machines--Wide belt sanding machines--Nomenclature 木工机床 宽带磨光机 术语 |
China National Standards working |
English PDF |
| GB/T 17244-1998 |
Hot environments--Estimation of the heat stress on working man based on the WBGT-index(wet bulb globe temperature) 热环境 根据WBGT指数(湿球黑球温度)对作业人员热负荷的评价 |
China National Standards working |
English PDF |
| GB/T 4019.2-1997 |
Box type vertical drilling machines--Testing of the accuracy--Part 2:working tests 方柱立式钻床 精度检验 第2部分:工作精度检验 |
China National Standards working |
English PDF |
| GB/T 4018.2-1997 |
Pillar type vertical drilling machines--Testing of the accuracy--Part 2:Testing of the working accuracy 圆柱立式钻床 精度检验 第2部分:工作精度检验 |
China National Standards working |
English PDF |
| GB 16993-1997 |
Safety regulations for working under hazardous condition of the oxygen deficiency in the cargo holds and closed compartments of ships 防止船舶货舱及封闭舱缺氧危险作业安全规程 |
China National Standards working |
English PDF |
| GB/T 16672-1996 |
Welds--working positions--Definitionsof angles of slope and rotation 焊缝 工作位置 倾角和转角的定义 |
China National Standards working |
English PDF |
| GB/T 15841-1995 |
Networking specification for digital microwave communication equipments 2～8 GHz digital microwave transceiver 数字微波通信设备进网技术要求 2～8 GHz数字微波收发信机 |
China National Standards working |
English PDF |
| GB/T 15839-1995 |
Networking specifications for64～1920 kbit/s video-conferencing systems 64～1920 kbit/s会议电视系统进网技术要求 |
China National Standards working |
English PDF |
| Find out:214Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
