Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HB 7716.18-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 18: Determination of lithium aNd lead content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 18 部分：电感耦合等离子体原子发射光谱法测定锂、铅含量 |
China Aviation Industry
Standards Nd |
 English PDF |
| HB 7716.17-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by iNductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 17 部分：电感耦合等离子体原子发射光谱法测定硼含量 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7716.16-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 16: Determination of platinum aNd palladium content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 16 部分：电感耦合等离子体原子发射光谱法测定铂、钯含量 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7716.15-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 15: Determination of tungsten, niobium, tantalum aNd nickel content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 15 部分：电感耦合等离子体原子发射光谱法测定钨、铌、钽、镍含量 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8631-2021 |
Full-scale aircraft fatigue test load haNdling requirements {译} 全尺寸飞机疲劳试验载荷处理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8626-2021 |
Airborne temperature sensor performance test requirements: static iNdication error, recovery characteristics, dynamic response and temperature measurement deviation {译} 机载温度传感器性能测试要求 静态示值误差、恢复特性、动态响应与测温偏差 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8620-2021 |
Concentrated quasi-static iNdentation force damage resistance test method for aerospace polymer matrix composite laminates {译} 航空用聚合物基复合材料层合板集中准静态压痕力损伤阻抗试验方法 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8612-2021 |
Aircraft cabin emergency equipment configuration aNd installation design requirements {译} 飞机客舱应急设备配置及安装设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8610-2021 |
General requirements for loading of tension aNd compression pads for aircraft structural testing {译} 飞机结构试验拉压垫加载通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8608-2021 |
Load haNdling requirements for static strength tests of aircraft structures {译} 飞机结构静强度试验载荷处理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8607-2021 |
Aircraft cockpit display system aNd user system interface requirements {译} 飞机驾驶舱显示系统与用户系统接口要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8604-2021 |
Design requirements for aircraft composite wing leading edge aNd tail leading edge structures {译} 飞机复合材料机翼前缘和尾翼前缘结构设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8601-2021 |
Full model design requirements for aircraft low-speed pressurized wiNd tunnel high Reynolds number tests {译} 飞机低速增压风洞高雷诺数试验全模型设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8600-2021 |
General requirements for stress calculation of aircraft low-speed pressurized wiNd tunnel high Reynolds number test model {译} 飞机低速增压风洞高雷诺数试验模型应力计算通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8599-2021 |
Installation requirements for aircraft low-speed pressurized wiNd tunnel high Reynolds number test model {译} 飞机低速增压风洞高雷诺数试验模型安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8598-2021 |
Design requirements for semi-model of aircraft low-speed pressurized wiNd tunnel high Reynolds number test {译} 飞机低速增压风洞高雷诺数试验半模型设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8597-2021 |
Measurement methods aNd general requirements for key geometric parameters of large aircraft components {译} 飞机大部件关键几何参数的测量方法及通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8596-2021 |
Development procedures for civilian light aNd small unmanned aerial vehicle systems {译} 民用轻小型无人机系统研制程序 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8595-2021 |
General requirements for portable grouNd control units for civilian light and small unmanned aerial vehicle systems {译} 民用轻小型无人机系统便携式地面控制单元通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8594-2021 |
Safety design requirements for civilian light aNd small unmanned aerial vehicle systems {译} 民用轻小型无人机系统安全性设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8593-2021 |
Flight performance of civil light aNd small multi-rotor unmanned aerial vehicle system {译} 民用轻小型多旋翼无人机系统飞行性能 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8688-2021 |
Requirements for QR code management of aviation staNdard parts {译} 航空标准件二维码管理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8686-2021 |
Crash safety test method for civilian light aNd small UAVs: Blade cut and stab test {译} 民用轻小型无人机碰撞安全性试验方法： 叶片割伤刺伤试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8685-2021 |
Crash safety test method for civilian light aNd small UAVs: Horizontal impact test {译} 民用轻小型无人机碰撞安全性试验方法： 水平冲击试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8684-2021 |
Amphibious aircraft structural corrosion protection aNd control design requirements {译} 水陆两栖飞机结构腐蚀防护与控制 设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8682-2021 |
General requirements for aircraft cabin souNd insulation {译} 飞机机舱隔声通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8680-2021 |
General requirements for aircraft laNding gear emergency disconnection tests {译} 飞机起落架应急断离试验通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8681-2021 |
General requirements for aircraft laNding gear shimmy testing {译} 飞机起落架摆振试验通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8674-2020 |
Specification for general aNd static pressure sensors for civil aircraft {译} 民用飞机总、静压受感器规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8591-2020 |
General requirements for civilian light aNd small fixed-wing unmanned aerial vehicle systems {译} 民用轻小型固定翼无人机系统通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8582-2020 |
Low-speed wiNd tunnel pressure test requirements for airfoil aerodynamic performance {译} 翼型气动性能低速风洞测压试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8579-2020 |
Test methods for civilian light aNd small fixed-wing unmanned aerial vehicle systems {译} 民用轻小型固定翼无人机系统试验方法 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8578-2020 |
Civil aircraft operational reliability data collection aNd management requirements {译} 民用飞机运行可靠性数据采集及管理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8576-2020 |
Interface requirements for civil aircraft airborne software operating system layer aNd module support layer {译} 民用飞机机载软件操作系统层与模块支持层接口要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8575-2020 |
Civil aircraft onboard embedded operating system aNd application software interface testing requirements {译} 民用飞机机载嵌入式操作系统与应用软件接口测试要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8567-2019 |
General requirements for light aNd small unmanned helicopter systems {译} 轻小型无人直升机系统通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8565-2019 |
Aerospace convex head MoNEL alloy bulging core bliNd rivets {译} 航空用凸头MoNEL合金鼓包型抽芯铆钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8564-2019 |
100 for aviation? Small countersunk head MoNEL alloy bulging core bliNd rivets {译} 航空用100？小沉头MoNEL合金鼓包型抽芯铆钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8563-2019 |
100 for aviation? Countersunk head MoNEL alloy bulging core bliNd rivets {译} 航空用100？沉头MoNEL合金鼓包型抽芯铆钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8562-2019 |
General specification for irradiation cross-linked ethylene-tetrafluoroethylene copolymer insulated extruded wires aNd cables for aviation use {译} 航空用辐照交联乙烯－四氟乙烯共聚物绝缘挤制电线电缆通用规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8543-2018 |
Design requirements for airborne vibration cyliNder pressure sensor {译} 机载振动筒压力传感器设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8540-2018 |
Specification for oxygen flow iNdicators for civil aircraft {译} 民用飞机氧气示流器规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8539-2018 |
Basic coNditions and evaluation methods for civil unmanned aircraft system development units {译} 民用无人驾驶航空器系统研制单位基本条件及评价方法 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 419-2017 |
Heat treatment process of titanium aNd titanium alloys for civil aircraft {译} 民用飞机用钛及钛合金热处理工艺 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8423.4-2017 |
Methods for identification of metal material grades Part 4: Identification of stainless steel aNd heat-resistant steel grades by reading spectra {译} 金属材料牌号鉴别方法 第4部分：看谱法鉴别不锈钢和耐热钢牌号 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7475-2017 |
Qualification aNd certification of aviation non-metallic performance testing personnel {译} 航空非金属性能检测人员的资格鉴定与认证 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8535-2016 |
General requirements for civil aircraft cockpit layout aNd facilities {译} 民用飞机驾驶舱布局和设施通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8342-2015(2017) |
GH4169 silver plated with lightening hole aNd 2 fuse holes twelve-point screw {译} GH4169镀银带减轻孔带2个保险丝孔十二角螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8341-2015(2017) |
GH4169 with lightening hole aNd 2 fuse holes twelve-point screw {译} GH4169带减轻孔带2个保险丝孔十二角螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8339-2015(2017) |
GH4169 Copper plated thread tolerance baNd 6G head 2 fuse hole hexagonal head screw {译} GH4169 镀铜螺纹公差带6G头部2 个保险丝孔六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8337-2015(2017) |
GH4169 Silver Plated Thread Tolerance BaNd 6G Hex Head Screws {译} GH4169镀银螺纹公差带6G六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8336-2015(2017) |
GH4169 Silver-plated thread tolerance baNd 6E hexagon head screws {译} GH4169 镀银螺纹公差带6E六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8335-2015(2017) |
GH4169 Copper Plated Threaded Tolerance BaNd 6E Hexagon Head Screws {译} GH4169镀铜螺纹公差带6E六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8334-2015(2017) |
GH4169 Silver Plated Thread Tolerance BaNd 4G6GMJ Thread Hex Head Screw {译} GH4169镀银螺纹公差带4G6GMJ螺纹六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8362-2015(2017) |
GH4169 thread tolerance baNd 6H polished rod tolerance band H7 thread with open pin hole long thread small hexagonal head bolt {译} GH4169螺纹公差带6H光杆公差带H7螺纹带开口销孔长螺纹小六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8352-2015(2017) |
GH4169 silver-plated thread tolerance baNd 4G6G polished rod tolerance band F9MJ thread hexagon head bolt {译} GH4169镀银螺纹公差带4G6G光杆公差带F9MJ螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8350-2015(2017) |
GH4169 Thread Tolerance BaNd 4H6HPD Rod MJ Thread Hex Head Bolt {译} GH4169螺纹公差带4H6HPD杆MJ螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8344-2015(2017) |
GH4169 thread tolerance baNd 4H6HMJ thread small hexagon head screw {译} GH4169螺纹公差带4H6HMJ螺纹小六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 424-2015(2017) |
Comprehensive guide to real-time operating systems aNd components in integrated modular avionics systems (IMA) for civil aircraft {译} 民用飞机综合模块化航空电子系统(IMA)中实时操作系统及组件综合指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8521-2015(2017) |
Design aNd installation requirements for soft fuel tanks for civil aircraft {译} 民用飞机软油箱设计和安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8519-2015(2017) |
On-board installation aNd testing requirements for civil aircraft electronic equipment {译} 民用飞机电子设备机上安装和试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8517-2015(2017) |
General specification for civil aircraft communications addressing aNd reporting systems {译} 民用飞机通信寻址和报告系统通用规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8514-2015(2017) |
Requirements for preparation of civil aircraft process staNdardization outline {译} 民用飞机工艺标准化大纲编写要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8512-2015(2017) |
Management requirements for qualified suppliers of civil aircraft staNdard parts {译} 民用飞机标准件合格供应商管理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8511-2015(2017) |
Civil aircraft staNdard parts qualified product catalog management requirements {译} 民用飞机标准件合格产品目录管理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 422-2014(2017) |
Guidelines for the Development aNd Certification of Integrated Modular Avionics Systems for Civil Aircraft {译} 民用飞机综合模块化航空电子系统开发与认证指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 421-2014(2017) |
Guidelines for Certification Assurance of Software onboard Systems aNd Equipment of Civil Aircraft {译} 民用飞机机载系统和设备软件合格审定保证指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 420-2014(2017) |
Certification aNd Assurance Guidelines for Civil Aircraft Airborne Electronic Hardware {译} 民用飞机机载电子硬件合格审定保证指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8504-2014(2017) |
Icing test requirements for civil aircraft fuel systems aNd accessories {译} 民用飞机燃油系统和附件结冰试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8501-2014(2017) |
GrouNd simulation test requirements for civil aircraft fuel systems {译} 民用飞机燃油系统地面模拟试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8500-2014(2017) |
Civil aircraft pneumatic system design aNd installation requirements {译} 民用飞机气动系统设计和安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8498-2014(2017) |
Civil aircraft laNding gear system performance test verification requirements {译} 民用飞机起落架系统性能试验验证要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8494-2014(2017) |
Design requirements for thermal insulation aNd sound insulation layers of civil aircraft cabins {译} 民用飞机客舱隔热、隔音层设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8493-2014(2017) |
Design requirements for civil aircraft cabin doors aNd emergency exits {译} 民用飞机客舱舱门及应急出口设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8492-2014(2017) |
Design requirements for civil aircraft cockpit ventilation wiNdows {译} 民用飞机驾驶舱通风窗设计要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8483-2014(2017) |
Cleaning aNd packaging requirements for civil aircraft oxygen supply systems {译} 民用飞机供氧系统清洗和包装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7478-2014(2017) |
Qualification aNd certification of aviation equipment failure analysts {译} 航空装备失效分析人员的资格鉴定与认证 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7477-2014(2017) |
Qualification aNd certification of aviation physics and metallurgical inspection personnel {译} 航空物理冶金检测人员的资格鉴定与认证 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7044-2014(2017) |
Fire test requirements for civil aircraft hose aNd pipe assemblies {译} 民用飞机软管和管组件防火试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 5459-2014(2017) |
Qualification aNd certification of aviation analytical chemical testing personnel {译} 航空分析化学检测人员的资格鉴定与认证 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8470-2014(2017) |
GrouNd test requirements for civil aircraft flight control systems {译} 民用飞机飞行控制系统地面试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8466-2014(2017) |
General requirements for grouNd vibration testing of civil aircraft {译} 民用飞机地面振动试验通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8464-2014(2017) |
Requirements for preparation aNd management of standardized documents for civil aircraft development {译} 民用飞机研制标准化文件编制管理要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8462-2014(2017) |
Civil aircraft noise control aNd measurement requirements {译} 民用飞机噪声控制与测量要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8460-2014(2017) |
Contamination acceptance level aNd control level requirements for civil aircraft hydraulic systems {译} 民用飞机液压系统污染度验收水平和控制水平要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8459-2014(2017) |
Design aNd installation requirements for civil aircraft hydraulic piping systems {译} 民用飞机液压管路系统设计和安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8451-2014(2017) |
Electrical boNding requirements for civil aircraft fuel systems {译} 民用飞机燃油系统电搭接要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8449-2014(2017) |
General requirements for structural design of civil aircraft laNding gear {译} 民用飞机起落架结构设计通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8436-2014(2017) |
Civil aircraft flight control system design aNd installation requirements {译} 民用飞机飞行控制系统设计和安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8433-2014(2017) |
Avionics interface requirements for civil aircraft flight management aNd communication management functions {译} 民用飞机飞行管理和通信管理功能的航空电子接口要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8432-2014(2017) |
Characteristic requirements for grouNd power supply for civil aircraft {译} 民用飞机地面电源供电特性要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8430-2014(2017) |
StaNdardization review requirements for civil aircraft development {译} 民用飞机研制标准化评审要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8429-2014(2017) |
Requirements for preparation of civil aircraft staNdardization outline {译} 民用飞机标准化大纲编写要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8425-2014(2017) |
Procurement aNd supply information classification and codes {译} 采购供应信息分类与代码 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8423.2-2014(2017) |
Methods for identifying metal material braNds Part 2: Identifying titanium alloy brands by looking at spectra {译} 金属材料牌号鉴别方法 第2部分：看谱法鉴别钛合金牌号 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8423.1-2014(2017) |
Identification method of metal material braNds Part 1: Identification of aluminum alloy brands by looking at the spectrum {译} 金属材料牌号鉴别方法 第1部分：看谱法鉴别铝合金牌号 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8412-2014(2017) |
General requirements for electrical boNding of civil aircraft systems {译} 民用飞机系统电搭接通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8400-2014(2017) |
Civil aircraft fuel system installation aNd testing requirements {译} 民用飞机燃油系统安装和试验要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8399-2014(2017) |
General specifications for civil aircraft grouNd proximity warning systems {译} 民用飞机近地告警系统通用规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8398-2014(2017) |
Specifications for slides, ladders aNd life rafts for emergency evacuation of civil aircraft {译} 民用飞机紧急撤离用滑梯、轻便梯和救生筏规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8393-2014(2017) |
Specification for civil aircraft cockpit seats aNd restraint systems {译} 民用飞机驾驶舱座椅和约束系统规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7735-2014 |
Model naming of aviation-derived gas turbines aNd complete sets of equipment {译} 航空派生型燃气轮机及成套设备型号命名 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7084-2014(2017) |
General requirements for bird strike resistance design aNd testing of civil aircraft structures {译} 民用飞机结构抗鸟撞设计与试验通用要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.9-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 9: Fluid sensitivity test {译} 民用飞机机载设备环境条件和试验方法 第9部分：流体敏感性试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.8-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 8: Waterproof test {译} 民用飞机机载设备环境条件和试验方法 第8部分：防水试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.7-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 7: Explosion test {译} 民用飞机机载设备环境条件和试验方法 第7部分：爆炸试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.6-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 6: Vibration test {译} 民用飞机机载设备环境条件和试验方法 第6部分：振动试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.5-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 5: Flight impact and crash safety tests {译} 民用飞机机载设备环境条件和试验方法 第5部分：飞行冲击和坠撞安全试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.4-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 4: Damp heat test {译} 民用飞机机载设备环境条件和试验方法 第4部分：湿热试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.3-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 3: Temperature change test {译} 民用飞机机载设备环境条件和试验方法 第3部分：温度变化试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.26-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 26: Electrostatic discharge test {译} 民用飞机机载设备环境条件和试验方法 第26部分：静电放电试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.25-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 25: Lightning direct effect test {译} 民用飞机机载设备环境条件和试验方法 第25部分：雷电直接效应试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.24-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 24: Lightning induced transient sensitivity test {译} 民用飞机机载设备环境条件和试验方法 第24部分：雷电感应瞬态敏感度试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.23-2014(2017) |
Environmental coNditions and test methods for civil aircraft airborne equipment Part 23: Radio frequency energy emission test {译} 民用飞机机载设备环境条件和试验方法 第23部分：射频能量发射试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.22-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 22: Radio frequency susceptibility test {译} 民用飞机机载设备环境条件和试验方法 第22部分：射频敏感性试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.2-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 2: Temperature and altitude tests {译} 民用飞机机载设备环境条件和试验方法 第2部分：温度和高度试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.21-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 21: Sensitivity test of induced signals {译} 民用飞机机载设备环境条件和试验方法 第21部分：感应信号敏感性试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.20-2014(2017) |
Environmental coNditions and test methods for airborne equipment on civil aircraft Part 20: Audio conduction sensitivity test on power cords {译} 民用飞机机载设备环境条件和试验方法 第20部分：电源线音频传导敏感性试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.19-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 19: Voltage spike test {译} 民用飞机机载设备环境条件和试验方法 第19部分：电压尖峰试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.18-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 18: Power input test {译} 民用飞机机载设备环境条件和试验方法 第18部分：电源输入试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.17-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 17: Magnetic influence test {译} 民用飞机机载设备环境条件和试验方法 第17部分：磁影响试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.16-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 16: Acceleration test {译} 民用飞机机载设备环境条件和试验方法 第16部分：加速度试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.15-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 15: Acoustic and vibration testing {译} 民用飞机机载设备环境条件和试验方法 第15部分：声振试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.14-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 14: Fire protection and flammability tests {译} 民用飞机机载设备环境条件和试验方法 第14部分：防火、可燃性试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.13-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 13: Icing test {译} 民用飞机机载设备环境条件和试验方法 第13部分：结冰试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.12-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 12: Salt spray test {译} 民用飞机机载设备环境条件和试验方法 第12部分：盐雾试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.1-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 1: General principles HB 6167.1-1989 {译} 民用飞机机载设备环境条件和试验方法 第1部分：总则 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.11-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 11: Mold test HB 6167.11-1989 {译} 民用飞机机载设备环境条件和试验方法 第11部分：霉菌试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 6167.10-2014(2017) |
Environmental coNditions and test methods for airborne equipment of civil aircraft Part 10: Sand and dust test HB 6167.10-1989 {译} 民用飞机机载设备环境条件和试验方法 第10部分：砂尘试验 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 5299.3-2014(2017) |
Qualification aNd certification of welding operators in the aerospace industry Part 3: Brazing {译} 航空工业焊接操作人员资格鉴定与认证 第3部分：钎焊 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 5299.2-2014(2017) |
Qualification aNd certification of welding operators in the aerospace industry Part 2: Electron beam welding and laser welding {译} 航空工业焊接操作人员资格鉴定与认证 第2部分：电子束焊及激光焊 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 5299.1-2014(2017) |
Qualification aNd certification of welding operators in the aerospace industry Part 1: Manual fusion welding HB 5299-1996 {译} 航空工业焊接操作人员资格鉴定与认证 第1部分：手工熔焊 |
China Aviation Industry
Standards Nd |
English PDF |
| JG/T581-2023 |
Hot-rolled H-shaped steel aNd split T-shaped steel for construction {译} 建筑用热轧H型钢和剖分T型钢 |
China Building Industry
Standards Nd |
English PDF |
| HB 8381-2013(2017) |
GH2132 MJ threaded hexagonal self-locking nut with flange aNd no closing section {译} GH2132带凸缘不带收口段的MJ螺纹六角自锁螺母 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8367-2013(2017) |
Specification for 1100MPA strength grade A286MJ threaded bolts aNd screws {译} 1100MPA强度等级A286MJ螺纹螺栓和螺钉规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8366-2013(2017) |
Titanium niobium alloy flat rouNd head rivets {译} 钛铌合金平圆头铆钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8365-2013(2017) |
1CR17Ni2 copper plated thread tolerance baNd 6E head 1 fuse hole long thread small hex head bolt {译} 1CR17Ni2镀铜螺纹公差带6E头部1个保险丝孔长螺纹小六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8364-2013(2017) |
1CR17Ni2 Thread Tolerance BaNd 6E Head 1 Fuse Hole Long Thread Small Hex Head Bolt {译} 1CR17Ni2螺纹公差带6E头部1个保险丝孔长螺纹小六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8356-2013(2017) |
TC4 thread tolerance baNd 4H6H polished rod tolerance band F9 head 1 fuse hole MJ extended thread hexagon head bolt {译} TC4螺纹公差带4H6H光杆公差带F9头部1个保险丝孔MJ加长螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8355-2013(2017) |
TC4 Thread Tolerance BaNd 6E Head 2 Fuse Holes MJ Long Thread Hex Head Bolt {译} TC4螺纹公差带6E头部2个保险丝孔MJ长螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8354-2013(2017) |
TC4 thread tolerance zone 4H6H polished rod tolerance zone F9MJ exteNded thread hexagon head bolt {译} TC4螺纹公差带4H6H光杆公差带F9MJ加长螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8347-2013(2017) |
GH2132 Silver Plated Thread Tolerance BaNd 6E Head 1 Fuse Hole Small Hex Head Screw {译} GH2132镀银螺纹公差带6E头部1个保险丝孔小六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8346-2013(2017) |
GH2132 Silver Plated Thread Tolerance BaNd 6E Head 2 Fuse Holes Small Hex Head Screw {译} GH2132镀银螺纹公差带6E头部2个保险丝孔小六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8345-2013(2017) |
GH2132 Copper plated threaded tolerance baNd 6E small hex head screws {译} GH2132镀铜螺纹公差带6E小六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8338-2013(2017) |
TC4 Thread Tolerance BaNd 6E Head 2 Fuse Holes MJ Thread Hex Head Screw {译} TC4螺纹公差带6E头部2个保险丝孔MJ螺纹六角头螺钉 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8333-2013(2017) |
Engine duct connection with female eNd with 74° cone and spherical connection {译} 发动机导管连接用74°锥面和球面连接的阴端头 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8332-2013(2017) |
Engine duct connection with male eNd with 74° taper connection {译} 发动机导管连接用74°锥面连接的阳端头 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8331-2013(2017) |
Welded eNd of fitting or nozzle for engine duct connection {译} 发动机导管连接用接头或管嘴的熔焊端 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8330-2013(2017) |
Brazed eNds of fittings or nozzles for engine duct connections {译} 发动机导管连接用接头或管嘴的钎焊端 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8320-2013(2017) |
A286 Polished Rod Tolerance BaNd F9MJ Thread Cross Recessed Short Thread Flat Head Bolt {译} A286光杆公差带F9MJ螺纹十字槽短螺纹平头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8317-2013(2017) |
A286 Polished Rod Tolerance BaNd F9MJ Thread Short Thread Hex Head Bolt {译} A286光杆公差带F9MJ螺纹短螺纹六角头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8316-2013(2017) |
Specification for 900MPA strength grade GH2132MJ threaded bolts aNd screws {译} 900MPA强度等级GH2132MJ螺纹螺栓和螺钉规范 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7437-2013(2017) |
A286MJ threaded flat head cone eNd bolt HB 7437-1996 {译} A286MJ螺纹扁圆头锥端螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7435-2013(2017) |
A286MJ threaded rouNd head bolt HB 7435-1996 {译} A286MJ螺纹扁圆头螺栓 |
China Aviation Industry
Standards Nd |
English PDF |
| CJ/T548-2023 |
Urban management aNd law enforcement standard clothing clothing {译} 城市管理执法制式服装 服饰 |
China Urban Construction Industry
Standards Nd |
English PDF |
| HB 8413-2013(2017) |
Procedures aNd requirements for special process qualification {译} 特殊过程确认的程序和要求 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 8396-2013(2017) |
Civil aircraft internal aNd external emergency signs {译} 民用飞机内外部应急标识 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 408-2013(2017) |
Internal pressure push beNding forming process of aluminum alloy small bending radius tube {译} 铝合金小弯曲半径管的内压推弯成形工艺 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 407.2-2013(2017) |
BeNding forming and shaping process of aluminum alloy parts Part 2: Profile parts {译} 铝合金零件压弯成形与校形工艺 第2部分：型材类零件 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 407.1-2013(2017) |
BeNding forming and shaping process of aluminum alloy parts Part 1: Wall panel parts {译} 铝合金零件压弯成形与校形工艺 第1部分：壁板类零件 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 403-2013(2017) |
Electrical Overcurrent Protection Device Selection aNd Application Guide {译} 电气过流保护器件的选择和应用指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB_Z 401-2013(2017) |
Environmental Design Guidelines for Encapsulation aNd Interfaces of Integrated Modular Avionics Systems for Civil Aircraft {译} 民用飞机综合模块化航空电子系统封装与接口的环境设计指南 |
China Aviation Industry
Standards Nd |
English PDF |
| HB 7471-2013(2017) |
Design aNd installation requirements for civil aircraft hydraulic systems HB 7471-1996 {译} 民用飞机液压系统设计和安装要求 |
China Aviation Industry
Standards Nd |
English PDF |
| CJ/T549-2023 |
City management law enforcement uniforms aNd hats {译} 城市管理执法制式服装 帽 |
China Urban Construction Industry
Standards Nd |
English PDF |
| CJ/T547-2023 |
City management law enforcement staNdard clothing uniforms {译} 城市管理执法制式服装 制服 |
China Urban Construction Industry
Standards Nd |
English PDF |
| CJ/T550-2023 |
City management law enforcement staNdard clothing and shoes {译} 城市管理执法制式服装 鞋 |
China Urban Construction Industry
Standards Nd |
English PDF |
| HB 8302-2012(2017) |
Safety production management requirements aNd evaluation methods for aviation industry enterprises {译} 航空工业企业安全生产管理要求及评价方法 |
China Aviation Industry
Standards Nd |
English PDF |
| GA/T 2018-2023 |
Public security video image information system operation aNd maintenance management platform software testing specifications {译} 公安视频图像信息系统运维管理平台软件测试规范 |
China Security Industry
Standards Nd |
English PDF |
| GA/T 2017-2023 |
Technical requirements for operation aNd maintenance management platform of public security video image information system {译} 公安视频图像信息系统运维管理平台技术要求 |
China Security Industry
Standards Nd |
English PDF |
| GA/T 2016-2023 |
Public security video image information system operation aNd maintenance management specifications {译} 公安视频图像信息系统运维管理规范 |
China Security Industry
Standards Nd |
English PDF |
| GA/T 2010-2023 |
Public security agency code maintenance aNd management specifications {译} 公安机关机构代码维护管理规范 |
China Security Industry
Standards Nd |
English PDF |
| QB/T 5868-2023 |
Child Seats Stability, Strength aNd Durability Test Methods {译} 儿童座椅 稳定性、强度和耐久性测试方法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5866-2023 |
Bedside fence for infants aNd toddlers {译} 婴幼儿用床边围栏 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5857-2023 |
GeNder sex toys, human lubricants {译} 两性情趣用品 人体润滑剂 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5850-2023 |
Shoemaking machinery, hot aNd cold press setting machine, general technical conditions {译} 制鞋机械 冷热压定型机 通用技术条件 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5849-2023 |
Shoemaking machinery, outsole laminating machine, general technical coNditions {译} 制鞋机械 外底贴合机 通用技术条件 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5848-2023 |
Shoemaking machinery saNd mill general technical conditions {译} 制鞋机械 砂磨机 通用技术条件 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5847-2023 |
Shoemaking machinery riveting machine general technical coNditions {译} 制鞋机械 铆合机 通用技术条件 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5843-2023 |
Shoemaking Machinery Sole Raising aNd Polishing Machine {译} 制鞋机械 鞋底起毛抛光机 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5833-2023 |
Determination of the content of six chlorophenols preservatives in toothpaste for oral cleaning aNd care products: p-chloro-m-cresol, hexachlorophenol, dichlorophenol, bromoclofen, benzylchlorophenol and chloroxylenol by high performance liquid chromatography {译} 口腔清洁护理用品 牙膏中p-氯-m-甲酚、六氯酚、双氯酚、溴氯芬、苄氯酚、氯二甲酚6种氯酚类防腐剂含量的测定 高效液相色谱法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5832-2023 |
Oral cleaning aNd care products. Determination of magnolol and honokiol content in toothpaste. High performance liquid chromatography. {译} 口腔清洁护理用品 牙膏中厚朴酚、和厚朴酚含量的测定 高效液相色谱法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5831-2023 |
Oral hygiene aNd care products Determination of sucralose in toothpaste High performance liquid chromatography {译} 口腔清洁护理用品 牙膏中三氯蔗糖的测定 高效液相色谱法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5830-2023 |
Oral cleaning aNd care products Determination of alpha-amylase activity in toothpaste {译} 口腔清洁护理用品 牙膏中α－淀粉酶活力测定 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5829-2023 |
Oral cleaning aNd care products tooth wax {译} 口腔清洁护理用品 牙蜡 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5828-2023 |
General technical coNditions for floor drain embedded boxes {译} 地漏预埋盒通用技术条件 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5827-2023 |
General technical requirements for lauNdry detergents for infants and young children {译} 婴幼儿衣物洗涤剂 通用技术要求 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5826-2023 |
INdustrial and Institutional Hard Surface Cleaners {译} 工业和公共设施硬表面清洁剂 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5822-2023 |
Watch case aNd its accessories Damp heat test and thermal shock test {译} 表壳体及其附件 湿热试验和热冲击试验 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5820-2023 |
Glass container small mouth coNdiment bottle {译} 玻璃容器 小口调味品瓶 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5816-2023 |
Polypropylene caleNdered film and sheet {译} 聚丙烯压延薄膜和片材 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5814-2023 |
Polyvinyl chloride (PVC) sheet for heat dissipation aNd water spraying {译} 散热淋水用聚氯乙烯（PVC）片材 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5811-2023 |
Marching baNd with drums {译} 行进乐队用鼓 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5809-2023 |
Steam hairdressing machines for household aNd similar purposes {译} 家用和类似用途蒸汽美发机 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5806-2023 |
Determination of sea cucumber polysaccharides in sea cucumbers aNd their products by liquid chromatography-mass spectrometry method {译} 海参及其制品中海参多糖的测定 液相色谱-质谱联用法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5800-2023 |
Intellectual Property Management Guide for Light INdustry Enterprises {译} 轻工业企业知识产权管理指南 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5799-2023 |
Light INdustry Corporate Social Responsibility Guide {译} 轻工业企业社会责任指南 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 5779-2023 |
lauNdry tablets {译} 洗衣片 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 4775-2023 |
Watch case aNd accessories - Test method for corrosion resistance of artificial sweat and salt spray QB/T 4775-2014 {译} 表壳体及其附件 人工汗和盐雾耐腐蚀性能试验方法 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 4428-2023 |
Product specifications aNd dimensions of lithium-ion batteries for electric bicycles QB/T 4428-2012 {译} 电动自行车用锂离子电池产品规格尺寸 |
China Light Industry Industry
Standards Nd |
English PDF |
| QB/T 4314-2023 |
Alkaline cleaning agent for food tools aNd industrial equipment QB/T 4314-2012 {译} 食品工具和工业设备用碱性清洗剂 |
China Light Industry Industry
Standards Nd |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
