Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| NB/T 20298-2014 |
Nuclear power plants-instrumentation and control important to safety. Hardware design requirements for digital systems 核电厂安全重要数字仪表和控制系统硬件设计要求 |
China Energy industry
Standards Nuclear power plants |
 English PDF |
| NB/T 20297-2014 |
Guide of human reliability analysis for Nuclear power plants 核电厂人员可靠性分析导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20295-2014 |
Ageing management guideline for pressure tubes of pressurized heavy water reactor Nuclear power plants 重水堆核电厂压力管老化管理指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20294-2014 |
Technical requirement for evaluation of preparedness and response for Nuclear power plants emergency during operation 核电厂运行期间应急准备与响应评价技术要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20292-2014 |
Test method for determination of reference temperature, T0, for ferritic steels in the ductile-to-brittle transition range for Nuclear power plants 核电厂用铁素体钢韧脆转变区参考温度t0的测试方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20290-2014 |
Qualifying of continuous duty safety class motors for Nuclear power plants 核电厂安全级连续工作制电动机的鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20288-2014 |
Qualification procedure for safety class valve position switch of Nuclear power plants 核电厂安全级阀门位置开关鉴定规则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20287-2014 |
Design and fabrication rules for refueling machine of PWR Nuclear power plants 压水堆核电厂装卸料机设计制造规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20285-2014 |
General requirements of reactor system design for pressurized water reactor Nuclear power plants 压水堆核电厂反应堆系统设计总要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20284-2014 |
Technical specification for safety class cable heat-shrinkable accessories in Nuclear power plants 核电厂安全级电缆热缩附件技术条件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20283-2014 |
Classification on environmental conditions for qualification electrical equipment important to safety for Nuclear power plants 核电厂安全重要电气设备鉴定环境条件分类 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20282-2014 |
Technical code for investigation and assessment of large component transportation of Nuclear power plants 核电厂大件设备运输调查与评价技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20281-2014 |
Guideline for equipment reliability management at Nuclear power plants 核电厂设备可靠性管理导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20280-2014 |
Design criteria of boron recycle system for PWR Nuclear power plants 压水堆核电厂硼回收系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20279-2014 |
Thermal evaluation method of electrical insulation systems for control rod drive mechanism coil in Nuclear power plants 核电厂控制棒驱动机构线圈绝缘系统耐热性评定方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20278-2014 |
Design criteria for emergency feedwater system of pressurized water reactor Nuclear power plants 压水堆核电厂应急给水系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20276-2014 |
Design criteria for component cooling water system of passive pressurized water reactor Nuclear power plants 非能动压水堆核电厂设备冷却水系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20275-2014 |
Stud welding specification for pressurized water reactor Nuclear power plants 压水堆核电厂螺柱焊接规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20274-2014 |
Design specification for cathodic protection of buried metallic structure applied in Nuclear power plants 核电厂埋地金属构筑物阴极保护设计规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20272-2014 |
Review and audits for software in Nuclear power plants 核电厂软件评审和审核 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20271-2014 |
Requirements of documents and records keeping and maintaining for the decommissioning of Nuclear power plants 核电厂退役需要的文件和记录的维护与保存要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20270-2014 |
Criteria for human factors applications of computerized operating procedure systems in Nuclear power plants 人因工程在核电厂计算机化运行规程系统中的应用准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20267-2014 |
Design criteria for computer-based procedure system in Nuclear power plants 核电厂计算机化运行规程系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20266-2014 |
Specification for design of condensate polishing, chemical reagents injection and secondary sampling system for PWR Nuclear power plants 压水堆核电厂凝结水精处理、化学加药及水汽取样系统设计规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20265-2014 |
Seismic testing of relays in Nuclear power plants 核电厂继电器抗震试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20263-2014 |
Design standard of communication system of Nuclear power plants 核电厂通信设计规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20262-2014 |
Design criteria for steam generator blowdown system of pressurized water reactor Nuclear power plants 压水堆核电厂蒸汽发生器排污系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20261-2014 |
Design criteria for emergency core cooling system of pressurized water reactor Nuclear power plants 压水堆核电厂应急堆芯冷却系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20260-2014 |
Design criteria for residual heat removal system of pressurized water reactor Nuclear power plants 压水堆核电厂余热排出系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20197.3-2014 |
Reliability and aging detection for instrumentation and control equipment in Nuclear power plants. Part 3: Power supply 核电厂仪表和控制设备可靠性及老化检测 第3部分:电源 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20197.2-2014 |
Reliability and aging detection for instrumentation and control equipment in Nuclear power plants. Part 2: Fuses 核电厂仪表和控制设备可靠性及老化检测 第2部分:熔断器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20004-2014 |
Physical and chemical test methods for materials used in nuclear island components of Nuclear power plants 核电厂核岛机械设备材料理化检验方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25031-2014 |
Guide of operation and maintenance for the moisture separator-reheater in Nuclear power plants 核电厂汽水分离再热器运行及维护指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25025-2014 |
Guideline on water leakage or hydrogen leakage of generator of Nuclear power plants 核电厂汽轮发电机漏水、漏氢的检验导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25022-2014 |
Mechanical interlock technical specification of electrical equipments in Nuclear power plants 核电厂全厂电气设备机械联锁技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25018-2014 |
Guideline for reliability data management of conventional island and balance of plant in Nuclear power plants 核电厂常规岛与辅助配套设施可靠性数据管理导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/Z 20250-2013 |
Guidance for the decision on modernization for Instrumentation and control system important to safety in Nuclear power plants 核电厂安全重要仪表和控制系统的更新改造决策指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/Z 20249-2013 |
Guidance for use of probabilistic safety assessment for classification of functions for instrumentation and control system important to safety in Nuclear power plants 概率安全评价在核电厂安全重要仪表和控制功能分类中的应用指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25017-2013 |
Technical supervision codes for metal in Nuclear power plants conventional island 核电厂常规岛金属技术监督规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.9-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 9: Valve 核电厂常规岛设备监造技术导则 第9部分:阀门 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.8-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 8: Pipe 核电厂常规岛设备监造技术导则 第8部分:管道 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.6-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 6: Feed water heater 核电厂常规岛设备监造技术导则 第6部分:给水加热器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.5-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 5: Moisture separator reheater 核电厂常规岛设备监造技术导则 第5部分:汽水分离再热器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.4-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 4: Condenser 核电厂常规岛设备监造技术导则 第4部分:凝汽器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.3-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 3: Generator 核电厂常规岛设备监造技术导则 第3部分:发电机 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.2-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 2: Steam turbine 核电厂常规岛设备监造技术导则 第2部分:汽轮机 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.12-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 12: Lifting equipment 核电厂常规岛设备监造技术导则 第12部分:起吊设备 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.1-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 1: General rule 核电厂常规岛设备监造技术导则 第1部分:总则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.11-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 11: Transm.ission and transformation equipment 核电厂常规岛设备监造技术导则 第11部分:输变电设备 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.10-2013 |
Surveiliance guide for conventional island equipment in Nuclear power plants. Part 10: Pump 核电厂常规岛设备监造技术导则 第10部分:水泵 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20255-2013 |
Design criteria for instrument line important to safety in Nuclear power plants 核电厂安全重要仪表管线设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20252-2013 |
Design criteria for engineered-safety-feature air cleaning units in PWR Nuclear power plants 压水堆核电厂专设安全设施空气净化装置设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20251-2013 |
Design criteria for normal air cleaning units in PWR Nuclear power plants 压水堆核电厂正常空气净化装置设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20248-2013 |
Guide for the evaluation of human-system performance in Nuclear power plants 核电厂人机特性评价指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20247-2013 |
General design requirements for physical protection system of Nuclear power plants 核电厂实物保护系统设计总体要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20245-2013 |
Item substitution criteria for Nuclear power plants 核电厂物项替代 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20239-2013 |
The specification of draw-up commissioning program for PWR Nuclear power plants 压水堆核电厂调试大纲编写规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20234-2013 |
Design rules for cranes at Nuclear power plants 核电厂专用起重机设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20232-2013 |
Design criteria for fuel handling and storage systems of pressurized water reactor Nuclear power plants 压水堆核电厂燃料装卸和贮存系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20229-2013 |
Electrical module type test of safety important instrumentation and control system for Nuclear power plants 核电厂安全重要仪表和控制系统电气模块型式试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20228-2013 |
Type testing of measuring sensors and transducers of safety important instrumentation and control system for Nuclear power plants 核电厂安全重要仪表和控制系统的敏感元件和传感器型式试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20227-2013 |
Qualification of switchgear assemblies for class 1E applications in Nuclear power plants 核电厂安全级成套开关设备鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20226-2013 |
Qualification of class 1E transformers for Nuclear power plants 核电厂安全级变压器鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20225-2013 |
Qualification of class 1E connection assemblies for Nuclear power plants 核电厂安全级电气连接件鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20222-2013 |
Ageing management guideline of steam generator in PWR Nuclear power plants 压水堆核电厂蒸汽发生器老化指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20218-2013 |
Nuclear power plants instrumentation and control important to safety requirements for electromagnetic compatibility testing 核电厂安全重要仪表和控制设备电磁兼容性试验要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20215-2013 |
Type test of movable micro-Sssion chamber for pressurized water reactor Nuclear power plants in-core neutron flux measurement 压水堆核电厂用于堆芯中子注量率测量的可移动式微型裂变室型式试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20214-2013 |
Qualification procedure for safety class low-voltage switchboard applied in Nuclear power plants 核电厂安全级低压配电盘鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20213-2013 |
Qualification procedure of safety-related electric cables and field splices for Nuclear power plants 核电厂安全级电缆及现场接头鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20210-2013 |
Qualification procedure of safety class battery chargers for Nuclear power plants 核电厂安全级充电器鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20209-2013 |
Type tests for transducers for rod position detector of Nuclear power plants 核电厂棒位探测器敏感元件型式试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20208-2013 |
ication of switchboard for safety class applied in Nuclear power plants 核电厂安全级配电盘质量鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20207-2013 |
Rules for qualification test of safety-related storage batteries in Nuclear power plants 核电厂安全级蓄电池鉴定试验规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20206-2013 |
Qualification test specification of safety related solenoid valves for valves actuators for Nuclear power plants 核电厂安全级阀门驱动装置用电磁阀鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20205-2013 |
Qualification procedure for electrical connection assemblies of safety class in Nuclear power plants 核电厂安全级电气连接件鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20204-2013 |
Specification for underwater assembly of Nuclear power plants 核电厂水下照明装置技术条件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20203-2013 |
Technical specification for ecological surveyinreceiving water of Nuclear power plants 核电厂受纳水域生态调查技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20202-2013 |
Technical specification for on-site atmospheric dispersion experiment of Nuclear power plants 核电厂厂址大气扩散试验规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20201-2013 |
Technical specification for social environmental survey around Nuclear power plants 核电厂厂址区域社会环境调查技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20200-2013 |
Technical specification for investigation and evaluation to external human-induced events of Nuclear power plants 核电厂外部人为事件调查与评价技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20199-2013 |
Technical specification of radiation environmental impact assessment for liquid radioactive effluent by coastal Nuclear power plants 滨海核电厂液态放射性流出物辐射环境影响评价技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20198-2013 |
Aging management and implementation for instrument and control equipment in Nuclear power plants 核电厂仪表和控制设备老化管理及实施 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20197.1-2013 |
Reliability and aging detection for instrument and control equipment in Nuclear power plants. Part 1: Electromagnetic relay 核电厂仪表和控制设备可靠性及老化检测 第1部分：电磁继电器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.9-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 9: Carbon steel wires and fluxes for submerged arc welding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第9部分：1、2、3级设备埋弧焊用碳钢焊丝和焊剂 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.5-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 5: Carbon steel flux cored electrodes for gas shielded arc welding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第5部分：1、2、3级设备用碳钢气体保护电弧焊药芯焊丝 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.4-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 4: Nickel-based alloy covered electrodes for class 1, 2, 3 components 压水堆核电厂用焊接材料 第4部分：1、2、3级设备用镍基合金焊条 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.14-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 14: Hard facing welding consumables for class 1, 2, 3 components 压水堆核电厂用焊接材料 第14部分：1、2、3 级设备用硬质合金堆焊焊接材料 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.13-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 13: Stainless steel strips and fluxes for cladding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第13部分：1、2、3级设备不锈钢堆焊用焊带和焊剂 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.12-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 12: Nickel-based alloy strip cladding with flux for class 1 components 压水堆核电厂用焊接材料 第12部分：1级设备镍基合金堆焊用焊带和焊剂 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.11-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 11: Nickel-Stainless steel wires and fluxes for submerged arc welding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第11部分：1、2、3级设备埋弧焊用不锈钢焊丝和焊剂 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.10-2013 |
Welding materials for pressurized water reactor Nuclear power plants. Part 10: Low alloy steelwelding wire and flux for submerged arc welding of class 1 components 压水堆核电厂用焊接材料 第10部分：1级设备埋弧焊用低合金钢焊丝和焊剂 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.14-2013 |
Additional materials for Pressurized water reactor Nuclear power plants. part 14: Nickel-chromium-iron alloy wires of springs 压水堆核电厂用其他材料 第14部分：镍-铬-铁合金弹簧丝 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.27-2013 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 27: Cast Elbows and inclined nozzles made from Austenitic-ferritic stainless steel for reactor coolant piping 压水堆核电厂用不锈钢 第27部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢铸造弯头和斜接管嘴 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.24-2013 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 24: austenitic-ferritic stainless steel castings pressured for reactor coolant pump casing 压水堆核电厂用不锈钢 第24部分：反应堆冷却剂泵蜗壳用奥氏体-铁素体不锈钢承压铸件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.23-2013 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 23: Class 1, 2 and 3 pressure-retaining austenitic-ferritic stainless steel castings 压水堆核电厂用不锈钢 第23部分：1、2、3级奥氏体-铁素体不锈钢承压铸件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.19-2013 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 19: Class 1, 2 and 3 pressure-retaining martensitic stainless steel castings 压水堆核电厂用不锈钢 第19部分：1、2、3级马氏体不锈钢承压铸件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.9-2013 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 9: Mn-Ni-Mo steel forgings for steam generator channel head 压水堆核电厂用合金钢 第9部分：蒸汽发生器水室封头用锰-镍-钼钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.16-2013 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 16: Mn-Ni-Mo steel plates for pressurizer supports 压水堆核电厂用合金钢 第16部分：稳压器支承构件用锰-镍-钼钢厚钢板 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.15-2013 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 15: Mn-Ni-Mo steel plates for pressure-retaining boundaries 压水堆核电厂用合金钢 第15部分：承压边界用锰-镍-钼钢厚钢板 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20005.6-2013 |
Carbon steel and alloy steel for pressurized water reactor Nuclear power plants. Part 6: Motor support stand castings for reactor coolant pumps 压水堆核电厂用碳钢和低合金钢 第6部分：反应堆冷却剂泵电动机机座铸件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20005.5-2013 |
Carbon steel and low alloy steel for pressurized water reactor Nuclear power plants. Part 5: Class 1, 2 and 3 pressure retaining castings 压水堆核电厂用碳钢和低合金钢 第5部分：1、2、3级承压铸件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20005.15-2013 |
Carbon steel and low alloy steel for pressurized water reactor Nuclear power plants. Part 15: Fittings welded with the addition of filler metal for use in class 2 and 3 auxiliary piping 压水堆核电厂用碳钢和低合金钢 第15部分：用填充金属焊接的2、3级管件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20005.10-2013 |
Carbon steel and low alloy steel for pressurized water reactor Nuclear power plants. Part 10: Class 2 and 3 steel pipes welded with the addition of filler metal 压水堆核电厂用碳钢和低合金钢 第10部分：用填充金属焊接的2、3级钢管 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25016.7-2013 |
Surveillance guide for conventional island equipment in Nuclear power plants. Part 7: Deaerator 核电厂常规岛设备监造技术导则 第7部分:除氧器 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 25009-2012 |
Energy statistics procedure in pressurized water Nuclear power plants 压水堆核电厂能量统计规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20191-2012 |
Accessibility criteria for in-service inspections in structural design of pressurized water reactor Nuclear power plants 压水堆核电厂结构设计中在役检查的可达性准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20190-2012 |
Noise control for production buildings of Nuclear power plants 核电厂生产厂房的噪声控制 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20187-2012 |
Design criteria for reactor coolant system in pressurized water reactor Nuclear power plants 压水堆核电厂反应堆冷却剂系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20184-2012 |
General specification on transport vessel for fresh fuel assembly of PWR Nuclear power plants 压水堆核电厂新燃料组件运输容器通用技术条件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20177-2012 |
Design criteria for component cooling water system of pressurized water reactor Nuclear power plants 压水堆核电厂设备冷却水系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20174-2012 |
The technical requirements of field fabrication and acceptance for carbon and stainless steel tank in pressurized water reactor Nuclear power plants 压水堆核电厂核岛碳钢及不锈钢贮罐现场制作及验收技术规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20170-2012 |
Qualification procedure of safety class diesel-generator units for Nuclear power plants 核电厂安全级柴油发电机组鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20168-2012 |
Qualification procedure for check valve of pressurized water reactor Nuclear power plants 压水堆核电厂止回阀鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20167-2012 |
Qualification procedure for isolation valve of pressurized water reactor Nuclear power plants 压水堆核电厂隔离阀鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20161-2012 |
Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized water reactor of Nuclear power plants 压水堆核电厂堆外中子注量率测量系统安装与试验技术规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20158-2012 |
Specification for volute concrete construct of circulating water pump of pressurized water reactors Nuclear power plants 压水堆核电厂循环水泵蜗壳混凝土施工技术规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20156-2012 |
Requirement for compilation and optimization for preventive maintenance program at Nuclear power plants 核电厂预防性维修大纲的编制与优化要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20155-2012 |
Aging management on class 1E equipment used in Nuclear power plants 核电厂安全级电气设备老化管理 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20153-2012 |
Ageing management guideline of prestressed concrete containment in Nuclear power plants 核电厂预应力混凝土安全壳老化管理指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20152-2012 |
Ageing management guideline of piping in Nuclear power plants 核电厂管道老化管理指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20151-2012 |
Guideline for preparing ageing management programme of pressurized water reactor Nuclear power plants 压水堆核电厂老化管理大纲编制指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20150-2012 |
Characteristics and test methods of self-powered neutron detectors for Nuclear power plants 核电厂自给能中子探测器特性和测试方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20149-2012 |
Qualification procedure for pressure transmitter important to safety of Nuclear power plants 核电厂安全重要压力变送器鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20148-2012 |
Resistance temperature detectors important to safety in Nuclear power plants 核电厂安全重要仪表电阻温度计 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20147-2012 |
Criteria for physical protection systems for Nuclear power plants 核电厂实物保护系统设备准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20146-2012 |
Design standard of automatic fire alarm system of Nuclear power plants 核电厂火灾自动报警系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20145-2012 |
Compiling criteria of commissioning test procedure and report for Nuclear power plants 核电厂调试试验程序和报告编写规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20144-2012 |
Initial criticality tests for pressurized water reactor of Nuclear power plants 压水堆核电厂反应堆首次临界试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.8-2012 |
Other materials for pressurized water reactor Nuclear power plants. Part 8: Hot extruded nickel-chromium-iron alloy pipes 压水堆核电厂用不锈钢 第26部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢离心浇铸管 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.17-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 17: Class 2 and 3 unalloyed and alloy ductile iron castings 压水堆核电厂用其他材料 第17部分：2、3 级非合金及合金球墨铸铁件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.16-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 16: Cabolt-base alloy for control rod drive mechanism 压水堆核电厂用其他材料 第16部分：控制棒驱动机构用钴基合金 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.4-2012 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 4: Niobium stabilized austenitic stainless steel forgings for the shafts of reactor coolant pumps 压水堆核电厂用不锈钢 第4部分：反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.26-2012 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 26: Austenitic-ferritic stainless steel centrifugally cast pipes for reactor coolant piping 压水堆核电厂用不锈钢 第26部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢离心浇铸管 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.21-2012 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 21: Martensitic stainless steel plates for use in making steam generator tube support plates 压水堆核电厂用不锈钢 第21部分：蒸汽发生器传热管支承用马氏体不锈钢板 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20007.13-2012 |
Stainless steel for pressurized water reactor Nuclear power plants. Part 13: Forged tubes and elbows made from controlled nitrogen austenitic stainless steel for reactor coolant piping 压水堆核电厂用不锈钢 第13部分：反应堆冷却剂管道用控氮奥氏体不锈钢锻造管和弯管 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.8-2012 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 8: Mn-Ni-Mo steel forgings for steam generator upper heads 压水堆核电厂用合金钢 第8部分：蒸汽发生器上封头用锰-镍钼钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.7-2012 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 7: Mn-Ni-Mo steel forgings for steam generators shells 压水堆核电厂用合金钢 第7部分：蒸汽发生器筒体用锰-镍-钼钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.5-2012 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 5: Mn-Ni-Mo alloy steel forgings for reactor pressure vessel heads 压水堆核电厂用合金钢 第5部分：反应堆压力容器封头用锰-镍-钼钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20006.13-2012 |
Alloy steel for pressurized water reactor Nuclear power plants. Part 13: Alloy steel forgings for reactor coolant pump motor shaft assembles 压水堆核电厂用合金钢 第13部分：反应堆冷却剂泵电动机轴系用合金钢锻件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20005.14-2012 |
Carbon steel and low alloy steel for pressurized water reactor Nuclear power plants. Part 14: Class 2 and 3 butt-welding seamless fittings 压水堆核电厂用碳钢和低合金钢 第14部分：2、3级对焊无缝管件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20142-2012 |
Guide for chemical decontamination of primary loop system and components of PWR Nuclear power plants 压水堆核电厂一回路系统及设备化学去污 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20140-2012 |
Technical specification for radiation protection of Nuclear power plants siting 核动力厂厂址选择辐射防护技术规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20137-2012 |
Regulation for staff training of radiation protection in Nuclear power plants 核电厂工作人员辐射防护培训规定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20136-2012 |
Design criterion for radiation controlled area access of Nuclear power plants 核电厂辐射控制区出入口设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20135-2012 |
General guidelines for reliability data exchange of Nuclear power plants 核电厂可靠性数据交换导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20134-2012 |
Guidelines to ensure quality of collected data on reliability of Nuclear power plants 保证所收集的核电厂可靠性数据质量的导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.6-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part 6: Coating operation 压水堆核电厂设施设备防护涂层规范 第6部分：涂装作业 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.5-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part 5: Standard test method for chemical resistance 压水堆核电厂设施设备防护涂层规范 第5部分：涂层系统耐化学介质的测定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.4-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part 4: Determination of the decontaminability of coatings 压水堆核电厂设施设备防护涂层规范 第4部分：涂层系统可去污性的测定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.3-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part 3: Standard test method for effects of gamma radiation 压水堆核电厂设施设备防护涂层规范 第3部分：涂层系统受γ射线辐照影响的试验方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.2-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part 2: Standard test method for evaluating coatings at simulated design basis accident(DBA)conditions 压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20133.1-2012 |
Specifications for protective coatings used in pressurized water reactor Nuclear power plants. Part l: General requirements 压水堆核电厂设施设备防护涂层规范 第1部分：通用要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20132-2012 |
Design requirements of personnel airlock for containment in pressurized water reactor Nuclear power plants 压水堆核电厂安全壳人员气闸门设计要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20131-2012 |
Design criteria for emergency core cooling sump of pressurized water reactors Nuclear power plants 压水堆核电厂应急堆芯冷却地坑设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20129-2012 |
General technical regulation for installation, test and acceptance of emergency diesel generator of nuclear island in pressurized water reactor Nuclear power plants 压水堆核电厂核岛应急柴油发电机组的安装、试验与验收技术规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20118-2012 |
Regulation for fire protection for Nuclear power plants construction 核电工程施工防火管理规定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20116-2012 |
The general requirements of informatization for Nuclear power plants construction project management 核电工程建设信息化管理通用要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20105-2012 |
Load code for the design of Nuclear power plants building structures 核电厂厂房设计荷载规范 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20104-2012 |
Analysis requirement for anticipated transient without scram on pressurized water reactor Nuclear power plants 压水堆核电厂未能紧急停堆的预期瞬态分析要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20100-2012 |
Principles for main primary system and main steam system overpressure analysis of pressurized water reactor Nuclear power plants 压水堆核电厂反应堆一回路系统和主蒸汽系统超压分析 要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20099-2012 |
Analysis demand for loss-of-coolant accident of pressurized water reactor Nuclear power plants 压水堆核电厂反应堆冷却剂丧失事故分析要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20098-2012 |
Design criteria for containment hydrogen control system of pressurized water reactor Nuclear power plants 压水堆核电厂安全壳氢气控制系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20096-2012 |
Failure mode and effects analysis for system of Nuclear power plants 核电厂系统故障模式与影响分析导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20093-2012 |
Qualification of safety-related valve actuators for Nuclear power plants 核电厂安全级阀门驱动装置的鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20092-2012 |
Inspection guide for the moisture separator reheater of pressurized water reactor Nuclear power plants 压水堆核电厂汽水分离再热器检验导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20091-2012 |
Inspection guide for the turbine of pressurized water reactor Nuclear power plants 压水堆核电厂汽轮机检验导则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20090-2012 |
Requirements for preoperational tests of class 1E power systems in Nuclear power plants 核电厂安全级电力系统预运行试验要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20089-2012 |
Standard criteria for the protection of class 1E power systems and equipment in Nuclear power plants 核电厂安全级电力系统及设备保护准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20088-2012 |
Requirements for the replacement parts and components for safety class equipment in Nuclear power plants 核电厂安全级电气设备零部件更换要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20087-2012 |
Aging management guidance for instrument and control cables important to safety for Nuclear power plants 核电厂安全重要仪表和控制电缆老化管理指南 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20086-2012 |
Assessing, monitoring, and mitigating aging effects on class 1E equipment used in Nuclear power plants 核电厂安全级电气设备老化评估、监测和缓解 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20085-2012 |
Qualification procedure for safety class high-voltage switchboard applied in Nuclear power plants 核电厂安全级高压配电盘鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20084-2012 |
Qualification procedure for safety class high-voltage switchboard applied in Nuclear power plants 核电厂安全级余热排出泵电机鉴定试验规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20083-2012 |
Criteria for lubricating oil systems design for emergency diesel generator of Nuclear power plants 核电厂应急柴油发电机润滑油系统设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20082-2012 |
Qualification procedure for safety-class diesel-generator applied as standby power supplies for Nuclear power plants 核电厂安全级柴油发电机鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20081-2012 |
Qualification procedure for class 1E transformer applied in pressurized-water reactor Nuclear power plants 压水堆核电厂安全级变压器鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20080-2012 |
Qualification of class 1E lead storage batteries for Nuclear power plants 核电厂安全级蓄电池质量鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20079-2012 |
Qualification procedure for safety-class electric actuators applied in Nuclear power plants 核电厂安全级阀门电动装置鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20078-2012 |
Qualification procedure for safety-related pneumatic control valve of pressurized water reactor Nuclear power plants 压水堆核电厂安全级气动调节阀鉴定规程 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20077-2012 |
Criteria for the handling and initial evaluation of records from Nuclear power plants seismic instrumentation 核电厂地震仪表记录的处理和初步评估 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20076-2012 |
Earthquake instrumentation criteria for Nuclear power plants 核电厂地震仪表准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20075-2012 |
Protection provided by electrical equipment against external impact for Nuclear power plants 核电厂电气设备防外部撞击的防护 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20074-2012 |
Qualification of class 1E motor control centers for Nuclear power plants 核电厂安全级电动机控制中心质量鉴定 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20073-2012 |
Criterion for instrumentation and control equipment grounding in Nuclear power plants 核电厂仪表和控制设备接地准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20072-2012 |
Determination and maintenance of trip setpoints for instrumentation of safety system in Nuclear power plants 核电厂安全系统仪表触发整定值的确定和保持 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20071-2012 |
Requirements for electrical supplies of instrumentation and control systems important to safety in Nuclear power plants 核电厂安全重要仪表和控制系统的供电要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20070-2012 |
Criteria for design, installation, and qualification of raceway systems for class 1E circuits in Nuclear power plants 核电厂安全级电路电缆通道系统设计安装和鉴定准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20069-2012 |
Performance monitoring test of instrumentation channels important to safety in Nuclear power plants 核电厂安全重要仪表通道性能监督试验 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20068-2012 |
Requirements for coping with common cause failure(CCF)of instrumentation and control systems important to safety in Nuclear power plants 核电厂安全重要仪表和控制系统应对共因故障的要求 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20067-2012 |
Identification for safety class equipment in Nuclear power plants 核电厂安全级电气设备标识 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20066-2012 |
The design criteria for Nuclear power plants station blackout 核电厂应对全厂断电设计准则 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20063-2012 |
Glossary of terms of instrumentation and control for Nuclear power plants 核电厂仪表和控制术语 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20062-2012 |
Batteries for uninterruptible power supply systems for Nuclear power plants 核电厂不间断电源系统蓄电池组 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.8-2012 |
Welding material for pressurized water reactor Nuclear power plants. Part 8: Nickel-based alloy wires and filler rods for class 1, 2, 3 components 压水堆核电厂用焊接材料 第8部分：1、2、3级设备用镍基合金焊丝和填充丝 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.7-2012 |
Welding material for pressurized water reactor Nuclear power plants. Part 7: Stainless steel wires and filler rods for class 1, 2, 3 components 压水堆核电厂用焊接材料 第7部分：1、2、3级设备用不锈钢焊丝和填充丝 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20009.6-2012 |
Welding material for pressurized water reactor Nuclear power plants. Part 6: Carbon steel electrodes and rods for gas shielded arc welding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第6部分：1、2、3级设备用碳钢气体保护电弧焊焊丝 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.9-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 9: Hot rolled or hot extruded nickel-chromium-iron alloy bars 压水堆核电厂用其他材料 第9部分：镍-铬-铁合金热轧或热挤棒 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.6-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 6: Hot rolled nickel-chromium-iron alloy plates 压水堆核电厂用其他材料 第6部分：镍-铬-铁合金热轧板 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.5-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 5: Class 1 and 2 hot rolled nickel-chromium-iron alloy plates 压水堆核电厂用其他材料 第5部分：1、2级镍-铬-铁合金热轧板 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| NB/T 20008.4-2012 |
Other material for pressurized water reactor Nuclear power plants. Part 4: Forged or rolled class 1, 2 and 3 nickel-chromium-iron alloy parts 压水堆核电厂用其他材料 第4部分：1、2、3 级镍-铬-铁合金锻、轧件 |
China Energy industry
Standards Nuclear power plants |
English PDF |
| Find out:486Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
