Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HG/T 3078-2001 |
surface characteristics for Rubber-or plastics-covered rollers 橡胶、塑料辊表面特性 |
China Chemical Industry
Standards surface |
 English PDF |
| HJ/T 91-2002 |
Technical Specification for surface Water and Wastewater Monitoring {译} 地表水和污水监测技术规范 |
China Environment Industry
Standards surface |
English PDF |
| JJG(JT)024-2002 |
(Eight continuous surface roughness meter verification procedures) |
China Metrological
Standards surface |
English PDF |
| FZ/T 10002-2001 |
Method of rank score for yarn-dyed denim surface defects 色织牛仔布布面疵点评分方法 |
China Textile & Garment industry
Standards surface |
English PDF |
| SJ 20794-2000 |
Resistor metworks, fixed, film, surface mount, general specification for 表面安装膜固定电阻网络总规范 |
China Electronics
Standards surface |
English PDF |
| HG/T 3505-2000 |
surface active agents Determination of saponification value 表面活性剂.皂化值的测定 |
China Chemical Industry
Standards surface |
English PDF |
| SY/T 10006-2000 |
Specification for Wellhead surface Safety Valves and Underwater Safety Valves for Offshore Service 海上井口地面安全阀和水下安全阀规范 |
China Oil & Gas Industry
Standards surface |
English PDF |
| SY/T 10033-2000 |
Recommended Practice for Analysis, Design, Installation and Testing of Basic surface Systems for Offshore Production Platforms 海上生产平台基本上部设施安全系统的分析、设计、安装和测试的推荐作法 |
China Oil & Gas Industry
Standards surface |
English PDF |
| QC/T 598-1999 |
(Order of the surface projection welding bolts) 承面凸焊螺栓 |
China Automobile & Vehicle industry
Standards surface |
English PDF |
| QC/T 340-1999 |
(Hexagon flange bolt bearing surface with teeth) 六角法兰承面带齿螺栓 |
China Automobile & Vehicle industry
Standards surface |
English PDF |
| HG/T 3073-1999 |
Rubber compounding ingredients. Silica, precipitated, hydrated. Determination of specific surface area. Nitrogen absorption method 橡胶配合剂 沉淀水合二氧化硅比表面积的测定 氮吸附方法 |
China Chemical Industry
Standards surface |
English PDF |
| HG/T 3008-1999 |
Determination of the surface resistance of film base 片基表面电阻的测定 |
China Chemical Industry
Standards surface |
English PDF |
| SY/T 5370-1999 |
The method for measurement of surface tension and interfacial tension 表面及界面张力测定方法 |
China Oil & Gas Industry
Standards surface |
English PDF |
| HG/T 3506-1999 |
surface active agents. Determination of electrical conductivity of water or aqueous solutions for tests 表面活性剂.试验用水活或水溶液电导率的测定 |
China Chemical Industry
Standards surface |
English PDF |
| JJG(JC)107-1999 |
Verification regulation for determination specific surface area of air permeability apparatus |
China Metrological
Standards surface |
English PDF |
| SY/T 10024-1998 |
Recommended practice for design, installation, repair and operation of subsurface safety valve system 井下安全阀系统的设计、安装、修理和操作的推荐作法 |
China Oil & Gas Industry
Standards surface |
English PDF |
| SJ 20714-1998 |
Test method for sub-surface damage of gallium arsenide polished wafer by X-ray double crystal diffraction 砷化镓抛光片亚损伤层的x射线双晶衍射试验方法 |
China Electronics
Standards surface |
English PDF |
| SJ/T 11187-1998 |
General specification for surface mounting adhesives 表面组装用胶粘剂通用规范 |
China Electronics
Standards surface |
English PDF |
| TB/T 2883.8-1998 |
(15 coupler knuckle s surface proofreading model) 15号车钩钩舌s曲面校对样板 |
China Railway & Train
Standards surface |
English PDF |
| TB/T 2879.3-1998 |
(Railway vehicles paint and coating - Part 3: surface treatment of metals and non-metallic materials technical conditions) 铁路机车车辆 涂料及涂装 第3部分:金属和非金属材料表面处理技术条件 |
China Railway & Train
Standards surface |
English PDF |
| HJ/T 23-1998 |
Siting of near surface disposal facilities of low-and-intermediate-level radioactive wastes 低、中水平放射性废物近地表处置设施的选址 |
China Environmental Protection Industry
Standards surface |
English PDF |
| SJ 20627-1997 |
Design guidelines for military surface mount circuit assemblies 军用射频合成信号发生器通用规范 |
China Electronics
Standards surface |
English PDF |
| SY/T 6235-1996 |
(NC General technical conditions logging surface) 数控测井地面仪通用技术条件 |
China Oil & Gas Industry
Standards surface |
English PDF |
| SJ/T 10860-1996 |
Test method for surface reflectivity of chromium film on chrome blanks 铬版铬膜表面反射率的测试方法 |
China Electronics
Standards surface |
English PDF |
| SJ/T 10858-1996 |
Test methods for surface flatness of glass substrate and chromium film 玻璃及铬版表面平整度的测试方法 |
China Electronics
Standards surface |
English PDF |
| SJ 52600/2-1996 |
Type SMU302, filter bank, surface acoustic wave, detail specification for ｓｍｕ３０２型声表面波滤波器组详细规范 |
China Electronics
Standards surface |
English PDF |
| SJ 52600/1-1996 |
Type SBP301, filters surface acoustic wave band - pass, detail specification for ｓｂｐ３０１型声表面波带通滤波器详细规范 |
China Electronics
Standards surface |
English PDF |
| SJ 50976/8-1995 |
Connectors, receptacle, electrical, coaxial, radio frequency(series SMA, socket contact, 8 hole surface launch right angle for strip or microstrip transmission line), detail specification for ｓｍａ系列（带状线或微带传输线用）插孔接触件８孔表面装接直角射频同轴插座连接器详细规范 |
China Electronics
Standards surface |
English PDF |
| SJ 50976/7-1995 |
Connectors, receptacle, electrical, coaxial, radio frequency(series SMA, pin contact, 8 hole surface launch for strip or microstrip transmission line), detail specification for ｓｍａ系列（带状线或微带传输线用）插针接触件８孔表面装接射频同轴插座连接器详细规范 |
China Electronics
Standards surface |
English PDF |
| SJ 50976/6-1995 |
Connectors, receptacle, electrical, coaxial, radio frequency(series SMA, socket contact, 8 hole surface launch for strip or microstrip transmission line), detail specification for ｓｍａ系列（带状线或微带传输线用）插孔接触件８孔表面装接射频同轴插座连接器详细规范 |
China Electronics
Standards surface |
English PDF |
| SY/T 6154-1995 |
(Rock surface area and pore size distribution measurement method static nitrogen adsorption capacity) 岩石比表面和孔径分布测定 静态氮吸附容量法 |
China Oil & Gas Industry
Standards surface |
English PDF |
| SJ/T 10670-1995 |
General requirements for workmanship of surface mount technology 表面组装工艺通用技术要求 |
China Electronics
Standards surface |
English PDF |
| SJ/T 10669-1995 |
Solderability tests for surface mounted devices 表面组装器件可焊性试验 |
China Electronics
Standards surface |
English PDF |
| SJ/T 10641-1995 |
Type designation system for surface acoustic wave filters 声表面波滤波器型号命名方法 |
China Electronics
Standards surface |
English PDF |
| FZ/T 90069-1995 |
(Parts of the surface junction graphics represent radius size requirements) 零件表面交接处图形所代表的圆角半径尺寸要求 |
China Textile & Garment industry
Standards surface |
English PDF |
| SJ 20399-1994 |
General specification for protective cover for planar waveguide -- fed slot array surface 平板裂缝天线阵面防护罩通用规范 |
China Electronics
Standards surface |
English PDF |
| QB/T 2002.2-1994 |
(Leather hardware accessories. surface coating layer of technical conditions) 皮革五金配件表面喷涂层技术条件 |
China Light Industry
Standards surface |
English PDF |
| SJ/T 31057-1994 |
(surface paint production line integrity requirements and inspection evaluation method) 表面喷漆生产线完好要求和检查评定方法 |
China Electronics
Standards surface |
English PDF |
| SJ/T 31020-1994 |
Requirements of readiness and methods of inspection and assessment for high precision surface grinding machines with horizontal spindles and rectangular tables 高精度卧轴矩台平面磨床完好要求和检查评定方法 |
China Electronics
Standards surface |
English PDF |
| SY/T 0049-1994 |
Planning and engineering code of oil-field surface production facilities construction |
China Oil & Gas Industry
Standards surface |
English PDF |
| SJ/T 10387-1993 |
General specification for SDC series treater for plastic surface corona treating ｓｄｃ系列塑料表面电晕处理设备通用技术条件 |
China Electronics
Standards surface |
English PDF |
| HJ/T 2.3-1993 |
Technical guidelines for environmental impact assessment. surfacewater environment 环境影响评价技术导则 地面水环境 |
China Environmental Protection Industry
Standards surface |
English PDF |
| SH/T 0571-1993 |
(Zeolite catalyst surface area measurement method) 催化剂中沸石表面积测定法 |
China Petrochemical Industry
Standards surface |
English PDF |
| JJG 831-1993 |
Verification regultion of green sand mould surface hardness tester for castings 铸造用湿型表面硬度计(试行) |
China Metrological
Standards surface |
English PDF |
| JC/T 489-1992 |
Magnalium curved surface decorative board 镁铝曲面装饰板 |
China Building Materials
Standards surface |
English PDF |
| QC/T 42-1992 |
(Evaluation of surface and material defects after car disc brake friction block test) 汽车盘式制动器摩擦块试验后表面和材料缺陷的评价 |
China Automobile & Vehicle industry
Standards surface |
English PDF |
| HG/T 2348-1992 |
(Polyester film tape surface roughness measurement. Stylus method) 磁带用聚酯薄膜表面粗糙度的测量 触针法 |
China Chemical Industry
Standards surface |
English PDF |
| HG/T 2347.8-1992 |
Determination of specific surface area of γ·Fe(index 2)O(index 3)magnetic powder γ-Fe2O3磁粉比表面积的测定 |
China Chemical Industry
Standards surface |
English PDF |
| SH/T 0387-1992 |
(Rope surface fat) 钢丝绳表面脂 |
China Petrochemical Industry
Standards surface |
English PDF |
| QB/T 1327-1991 |
(Leather surface color rubbing fastness test methods) 皮格表面颜色摩擦牢度测试方法 |
China Light Industry
Standards surface |
English PDF |
| QB/T 1323-1991 |
(Detergents. Determination of surface tension. Rings up liquid films) 洗涤剂.表面张力的测定.圆环拉起液膜法 |
China Light Industry
Standards surface |
English PDF |
| QB/T 1219-1991 |
(Cycling conditions for surface oxidation treatment technology) 自行车表面氧化处理技术条件 |
China Light Industry
Standards surface |
English PDF |
| JJG(EJ)16-1991 |
(With grid ionization chamber standard device for measuring α planar surface emissivity source test methods) |
China Metrological
Standards surface |
English PDF |
| JJG(JB)20-1990 |
(WJM-1-type surface thermometer calibration device test procedures) |
China Metrological
Standards surface |
English PDF |
| TB 2048.14-1989 |
(13 coupler knuckle S model surface and thickness overhaul) |
China Railway & Train
Standards surface |
English PDF |
| TB 2048.12-1989 |
(13 coupler knuckle lock surface maintenance model) |
China Railway & Train
Standards surface |
English PDF |
| QB/T 3814-1999 |
surface examination method of the metal depoalts and conversion coatings for the light industrial products 轻工产品金属镀层和化学处理层的外观质量测试方法 |
China Light Industry
Standards surface |
English PDF |
| TB/T 1670.11-1985 |
(15 Coupler tongue traction surface model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.8-1985 |
(13 rotary coupler knuckle under side surface model (R86) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.7-1985 |
(13 rotary coupler knuckle under side surface model (R153) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.6-1985 |
(13 rotary coupler knuckle on the side surface model (R86) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.5-1985 |
(13 rotary coupler knuckle on the side surface model (R153) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.4-1985 |
(13 rotary coupler cavity model under the hook side surface (R86) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.3-1985 |
(13 rotary coupler cavity under the hook side surface model (R152) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.28-1985 |
(13 rotary coupler knuckle under side surface model (R86) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.27-1985 |
(13 rotary coupler knuckle under side surface model (R153) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.26-1985 |
(13 rotary coupler knuckle on the side surface model (R86) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.25-1985 |
(On the 13th rotary coupler knuckle side surface model (R153) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.24-1985 |
(Under the 13th rotary coupler cavity model leptospirosis side surface (R86) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.23-1985 |
(Under the 13th chamber rotary coupler leptospirosis side surface model (R152) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.22-1985 |
(On the 13th rotary coupler cavity model leptospirosis side surface (R86) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.2-1985 |
(13 rotary coupler on the hook cavity model side surface (R86) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.21-1985 |
(On the 13th chamber rotary coupler leptospirosis side surface model (R152) proofreading model) |
China Railway & Train
Standards surface |
English PDF |
| TB 1669.1-1985 |
(The 13th chamber rotary coupler on the hook side surface model (R152) proofreading model reference model) |
China Railway & Train
Standards surface |
English PDF |
| TB/T 1423-1982 |
(Communication signal product surface coloring) |
China Railway & Train
Standards surface |
English PDF |
| Find out:275Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
